Bleys
Anmeldungsdatum: 13. August 2006
Beiträge: 6172
|
B0ney schrieb: Möchte hier gerne einmal meine .conkyrc vorstellen! Das Grundgerüst habe ich irgendwann mal im Internet gefunden. Einiges habe ich jedoch etwas abgeändert.
Leider erkennt ihr auf dem Screenshot ein kleines Problem, welches ich bis jetzt noch nicht beseitigt kriege. Habt ihr vielleicht Ideen?
Hmm.. der Ratethread ist eigentlich in einem anderem Forum 😉 Aber egal, ich rate mal. Kannst ja dann die richtige Antwort ankreuzen: Die Inkonsistenz Deiner Prozentangaben. Mem zeigts Du belegt und HDs frei an Die unvollständige Angabe zu Disk-1 Die falsche Angabe zu /OS (/dev/sda ist die HD, keine Partion...) Die falsche Ausrichtung "Title"
|
B0ney
Anmeldungsdatum: 7. März 2012
Beiträge: 124
|
Achso, ja, das sind Kleinigkeiten, denen ich mich noch widmen werde 😉
Gemeint ist der fehlerhafte Hintergrund von Conky.
Seitdem ich mein Wallpaper geändert habe, sehe ich noch das Überbleibsel des alten. Ich habe eben keine Ahnung, wie ich das wegbekomme.
Habe schon own-window off versucht und ähnliches...
|
Bleys
Anmeldungsdatum: 13. August 2006
Beiträge: 6172
|
Füge mal imlib_cache_size 0 hinzu. Das sorgt dafür das Images neu gezeichnet werden wenn sie sich ändern und die Transparenz in Conky ist ja auch nur ein erzeugtes Images des Hintergrunds. [Nachtrag] Das wird nicht helfen seh ich gerade, Du hast xfce. Eher dann das hier: own_window_argb_visual yes
own_window_argb_value 0
|
B0ney
Anmeldungsdatum: 7. März 2012
Beiträge: 124
|
Vielen Dank! Das hat geholfen! ☺
Was genau bewirken denn die zwei Zeilen?
|
Bleys
Anmeldungsdatum: 13. August 2006
Beiträge: 6172
|
B0ney schrieb: Vielen Dank! Das hat geholfen! ☺
Was genau bewirken denn die zwei Zeilen?
http://conky.sourceforge.net/config_settings.html Der Befehl ist in der unteren Hälfte
|
man0riaX
Anmeldungsdatum: 15. April 2008
Beiträge: 182
|
cougartrader schrieb: Hallo hier mein erster Conky, ist noch nicht ganz fertig aber ich denke bereits vorzeigbar #
background no
use_xft yes
xftfont 123:size=8
xftalpha 0.1
update_interval 1
total_run_times 0
own_window yes
own_window_type normal
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
double_buffer yes
maximum_width 500
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders no
default_color lightgray
default_shade_color red
default_outline_color green
alignment top_right
gap_x 24
gap_y 24
no_buffers yes
uppercase no
cpu_avg_samples 2
net_avg_samples 2
override_utf8_locale yes
use_spacer none
TEXT
${alignc 32}${font Open Sans:size=20}${color lightgray}ubuntu${color GOLDENROD} 12.04
$color${font}${font Open Sans:size=20}$alignr${time %H:%M}$font
${color gray99}${font Open Sans:Bold:size=10}Datum${hr 2}$color$font
$color${font Open Sans:size=12}$alignr${time %a}, ${time %d %b %Y}$font$color
# SYS
${font Open Sans:Bold:size=10}${color gray99}SYSTEM${hr 2}$color${font}
$sysname $kernel $alignr $machine
Uptime $alignr $uptime
Mainboard Temperatur $alignr ${hwmon 2 temp 1}°
NVIDIA Temperatur $alignr ${nvidia temp}°
Festplatte Temperatur $color${font Open Sans:bold:size=8.5} $font$alignr ${execi 30 hddtemp /dev/sda | grep '/dev/sda:' | cut -c31-32}°C
Fan: $font$alignr ${hwmon 2 fan 1} rpm
# CPU
${font Open Sans:Bold:size=10}${color gray99}CPU${hr 2}
$color${font}Intel i5 2500k $alignr ${freq_g cpu0}GHz
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
${font}Core 0 ${color GOLDENROD}${execi 30 sensors | grep 'Core 0:' | cut -c18-19}°C${color} @ ${cpu cpu1} % $alignc ${color gray99}${cpubar cpu1}${color}
${font}Core 1 ${color GOLDENROD}${execi 30 sensors | grep 'Core 1:' | cut -c18-19}°C${color} @ ${cpu cpu2} % $alignc ${color gray99}${cpubar cpu2}${color}
${font}Core 2 ${color GOLDENROD}${execi 30 sensors | grep 'Core 2:' | cut -c18-19}°C${color} @ ${cpu cpu3} % $alignc ${color gray99}${cpubar cpu3}${color}
${font}Core 3 ${color GOLDENROD}${execi 30 sensors | grep 'Core 3:' | cut -c18-19}°C${color} @ ${cpu cpu4} % $alignc ${color gray99}${cpubar cpu4}${color}
# TOP
${font Open Sans:Bold:size=10}${color gray99}TOP${hr 2}
$color${font}${font Open Sans:bold:size=8.5}PROCESS $alignr CPU USAGE$font
${top name 1}${alignr}${top cpu 1} % ${hr 2}
${top name 2}${alignr}${top cpu 2} %
${top name 3}${alignr}${top cpu 3} %
${top name 4}${alignr}${top cpu 4} %
${top name 5}${alignr}${top cpu 5} %
# Speicher
${font Open Sans:Bold:size=10}${color gray99}Speicher${hr 2}
$color${font}${font Open Sans:bold:size=8.5}RAM$font
$mem / $memmax $alignr $memperc %
$membar
${font Open Sans:bold:size=8.5}SWAP$font
$swap / $swapmax $alignr $swapperc
${swapbar};
# HDD
${font Open Sans:Bold:size=10}${color gray99}Partitionen${hr 2}
${font Open Sans:bold:size=8.5}ROOT $font$font$alignr ${fs_type /}
${fs_used /} / ${fs_size /} $alignr ${fs_used_perc /} %
${fs_bar /}
${font Open Sans:bold:size=8.5}HOME $font$alignr ${fs_type /home}
${fs_used /home} / ${fs_size /home} $alignr ${fs_used_perc /home} %
${fs_bar /home}
${font Open Sans:Bold:size=8.5}${color gray99}Verfügbare Updates${hr 2}
${execi 1800 apt-get --just-print upgrade | grep -o ^"[0-9]* aktualisiert," | awk '{print $1}'} Updates
LG Holger
Habe mir deine .conkyrc mal geklaut und ein wenig angepasst (ich hoffe, dass das okay ist). Sieht echt super aus! ☺ #
background no
use_xft yes
xftfont 123:size=8
xftalpha 0.1
update_interval 1
total_run_times 0
own_window yes
own_window_type normal
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
double_buffer yes
maximum_width 500
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders no
default_color lightgray
default_shade_color red
default_outline_color green
alignment top_right
gap_x 24
gap_y 24
no_buffers yes
uppercase no
cpu_avg_samples 2
net_avg_samples 2
override_utf8_locale yes
use_spacer none
TEXT
# SYS
${font Open Sans:Bold:size=10}${color gray99}SYSTEM${hr 2}$color${font}
$sysname $kernel $alignr $machine
Uptime $alignr $uptime
# CPU
${font Open Sans:Bold:size=10}${color gray99}CPU${hr 2}
$color${font}AMD A6-3420M $alignr ${freq_g cpu0}GHz
$stippled_hr
${font}Core 0 @ ${cpu cpu1} % $alignc ${color gray99}${cpubar cpu1}${color}
${font}Core 1 @ ${cpu cpu2} % $alignc ${color gray99}${cpubar cpu2}${color}
${font}Core 2 @ ${cpu cpu3} % $alignc ${color gray99}${cpubar cpu3}${color}
${font}Core 3 @ ${cpu cpu4} % $alignc ${color gray99}${cpubar cpu4}${color}
# TOP
${font Open Sans:Bold:size=10}${color gray99}TOP${hr 2}
$color${font}${font Open Sans:bold:size=8.5}PROCESS $alignr CPU USAGE$font
${top name 1}${alignr}${top cpu 1} % ${hr 2}
${top name 2}${alignr}${top cpu 2} %
${top name 3}${alignr}${top cpu 3} %
${top name 4}${alignr}${top cpu 4} %
${top name 5}${alignr}${top cpu 5} %
# Speicher
${font Open Sans:Bold:size=10}${color gray99}Memory${hr 2}
$color${font}${font Open Sans:bold:size=8.5}RAM$font
$mem / $memmax $alignr $memperc %
$membar
${font Open Sans:bold:size=8.5}SWAP$font
$swap / $swapmax $alignr $swapperc
${swapbar};
# HDD
${font Open Sans:Bold:size=10}${color gray99}HDD${hr 2}
${font Open Sans:bold:size=8.5}ROOT $font$font$alignr ${fs_type /}
${fs_used /} / ${fs_size /} $alignr ${fs_used_perc /} %
${fs_bar /}
# Netzwerk
${font Open Sans:Bold:size=10}${color gray99}Network${hr 2}
${font} IPv4 (eth0) ${alignr}${addr eth0}
${font} Down (eth0) ${alignr}${downspeed eth0}
${font} Up (eth0) ${alignr}${upspeed eth0}
$stippled_hr
${font} IPv4 (wlan0) ${alignr}${addr wlan0}
${font} Down (wlan0) ${alignr}${downspeed wlan0}
${font} Up (wlan0) ${alignr}${upspeed wlan0}
$stippled_hr
${font} IPv4 (WAN) ${alignr}${execi 7200 ~/.conky/publicip.sh} das Public-IP-Skript ist dasselbe, das im Wiki beschrieben wird.
- Bilder
|
djcj
Anmeldungsdatum: 28. August 2013
Beiträge: 240
|
Ein Skript das ich gefunden und leicht abgeändert habe. # UBUNTU-CONKY
# A comprehensive conky script, configured for use on
# Ubuntu / Debian Gnome, without the need for any external scripts.
#
# Based on conky-jc and the default .conkyrc.
# INCLUDES:
# - tail of /var/log/messages
# - netstat connections to your computer
#
# -- Pengo (conky@pengo.us)
#
# Create own window instead of using desktop (required in nautilus)
own_window yes
own_window_hints undecorated,below,skip_taskbar
own_window_type desktop
background yes
# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
# fiddle with window
use_spacer yes
use_xft yes
# Update interval in seconds
update_interval 3.0
# Minimum size of text area
minimum_size 400 5
# Draw shades?
draw_shades no
# Text stuff
draw_outline no # amplifies text if yes
draw_borders no
uppercase no # set to yes if you want all text to be in uppercase
# Stippled borders?
stippled_borders 1
# border margins
border_margin 1
# border width
border_width 1
# Default colors and also border colors, grey90 == #e5e5e5
default_color white
default_shade_color black
default_outline_color grey90
#own_window_colour 001F47
own_window_transparent yes
# Text alignment, other possible values are commented
#alignment top_left
alignment top_right
#alignment bottom_left
#alignment bottom_right
# Gap between borders of screen and text
gap_x -171
gap_y 80
# stuff after 'TEXT' will be formatted on screen
override_utf8_locale yes
xftfont Terminus:size=10
xftalpha 1.0
TEXT
${voffset 6}${color}${font OpenLogos:size=20} ${voffset -20}
${color}${font StyleBats:size=12}${font} ${color grey}UpTime: ${color }$uptime
${color}${font StyleBats:size=12}${font}${color grey}Kern:${color } $kernel $machine
${color}${font StyleBats:size=12}${font}${color grey}CPU:${color } $cpu% ${acpitemp}°C
${cpugraph 20,190 000000 ffffff}
${color grey}Load: ${color }$loadavg
${color grey}Processes: ${color }$processes
${color grey}Running: ${color }$running_processes
${color}${font Webdings:size=12}i ${font}${color grey}Highest CPU:
${color #ddaa00} ${top name 1}${top cpu 1}
${color lightgrey} ${top name 2}${top cpu 2}
${color lightgrey} ${top name 3}${top cpu 3}
${color}${font Webdings:size=12}i ${font}${color grey}Highest MEM:
${color #ddaa00} ${top_mem name 1}${top_mem mem 1}
${color lightgrey} ${top_mem name 2}${top_mem mem 2}
${color lightgrey} ${top_mem name 3}${top_mem mem 3}
${color grey}MEM: ${color } $memperc% $mem/ $memmax
${membar 3,190}
${color grey}SWAP: ${color } $swapperc% $swap/ $swapmax
${swapbar 3,190}
${color grey}ROOT: ${color }${fs_free /} / ${fs_size /}
${fs_bar 3,190 /}
${color grey}HOME: ${color }${fs_free /home}/ ${fs_size /home}
${fs_bar 3,190 /home}
${color grey}Internet:
${voffset 6}${color}Total down: ${totaldown eth0}
${voffset 1}${color}Down: ${color }${downspeed eth0}/s
${downspeedgraph eth0 20,190 000000 ffffff}
${color}Total up: ${totalup eth0}
${voffset 1}${color}Up: ${color }${upspeed eth0}/s
${upspeedgraph eth0 20,190 000000 ffffff}
${image /home/djcj/.conkybackground.png -p 0,0 -s 230x720}
- Bilder
|
pmh
Anmeldungsdatum: 12. April 2007
Beiträge: 90
Wohnort: Losone, Tessin, Schweiz
|
Hallo
Ich habe ein kleines Problem mit meiner conkyrc (siehe Anhang) Die Variable wireless_link_qual_perc eth1 wird nicht angezeigt, stattdessen steht einfach eine Null. Meine WLAN-Schnittstelle ist eth1 und alle anderen Netzwerk/Wireless Variablen klappen super mit dem Argument eth1.
Ist das ein bekanntes Problem? Hab schon im Forum System einrichten und verwalten ein Thema gestartet, aber da konnte man mir leider auch nicht wirklich weiterhelfen... siehe http://forum.ubuntuusers.de/topic/conky-kann-kein-wireless-link-qual-perc/ Hat von euch jemand eine coole Idee?
Danke!
- conkyrc (3.1 KiB)
- Download conkyrc
|
Miccovin
Anmeldungsdatum: 9. Februar 2007
Beiträge: 756
|
Keine Ahnung, woran es liegt. Kann auch nur vermuten, dass Conky bzlg. Wlan und eth1 verwirrt ist. Dieser Thread ist auch eigentlich halbtot, daher frag mal im englischen Forum - dort muss man eher aufpassen, dass eine Frage nicht untergeht. Und gib mal Bescheid, wenn es eine Lösung gibt: http://ubuntuforums.org/showthread.php?t=281865
|
Ubuntu_Neuling_1981
Anmeldungsdatum: 31. Dezember 2009
Beiträge: 658
Wohnort: Süßen
|
Miccovin schrieb: Dieser Thread ist auch eigentlich halbtot, daher frag mal im englischen Forum - dort muss man eher aufpassen, dass eine Frage nicht untergeht. Und gib mal Bescheid, wenn es eine Lösung gibt: http://ubuntuforums.org/showthread.php?t=281865
Wohl eher im Koma ^^ pmh schrieb: Hallo
Ich habe ein kleines Problem mit meiner conkyrc (siehe Anhang) Die Variable wireless_link_qual_perc eth1 wird nicht angezeigt, stattdessen steht einfach eine Null. Meine WLAN-Schnittstelle ist eth1 und alle anderen Netzwerk/Wireless Variablen klappen super mit dem Argument eth1.
Ist das ein bekanntes Problem? Hab schon im Forum System einrichten und verwalten ein Thema gestartet, aber da konnte man mir leider auch nicht wirklich weiterhelfen... siehe http://forum.ubuntuusers.de/topic/conky-kann-kein-wireless-link-qual-perc/ Hat von euch jemand eine coole Idee?
Danke!
Versuche es mal mit:
| ${color grey}Networking:
Signal:$color ${wireless_link_qual eth0} ${color grey} IP:$color ${addr eth0} ${color grey}
${color grey}Jetzt: Up:$color ${upspeed eth0} ${color grey} - Down:$color ${downspeed eth0}
|
@ pmh
Versuch mal das: http://wiki.ubuntuusers.de/Hardware bzw. http://wiki.ubuntuusers.de/Systeminformationen_ermitteln
Runter scrollen bis Netzwerk und die Ausgabe posten.
|
Das_Wort
Anmeldungsdatum: 23. Dezember 2009
Beiträge: 5264
Wohnort: /dev/null
|
Mein Conky ist gerade das Numix Theme aus der Conky-Suite Harmattan.
|
Ubuntu_Neuling_1981
Anmeldungsdatum: 31. Dezember 2009
Beiträge: 658
Wohnort: Süßen
|
Futuristic Conky 2.3.0 http://gnome-look.org/content/show.php/Futuristic+Conky+2.3.0?content=151440 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47 | TEXT
${voffset 107}
${image $HOME/.Conky/future_conky/pix/bg2.png -p 1,130 -s 200x130}
${voffset 21}${goto 15}RAM- Network- GPU Temp- cpu 1-4
${voffset 8}${goto 137}${cpugraph cpu1 7,52 FFFFFF FFFFcc -t}
${voffset 0}${goto 137}${cpugraph cpu2 7,52 FFFFFF FFFFcc -t}
${voffset 0}${goto 137}${cpugraph cpu3 7,52 FFFFFF FFFFcc -t}
${voffset 0}${goto 137}${cpugraph cpu4 7,52 FFFFFF FFFFcc -t}
${voffset -23}${goto 60}t.ram ${memmax}
${voffset 11}${goto 68}${swap}: ${swapmax}
${voffset 11}${goto 66}cache ${cached}
${voffset 14}${goto 10}NT d: ${downspeed eth0}${voffset -6}${goto 75}${downspeedgraph eth0 12,56 FFFFFF FFFFcc -t}
${voffset 6}${goto 25}U: ${upspeed eth0}${voffset -7}${goto 75}${upspeedgraph eth0 12,56 FFFFFF FFFFcc}
${voffset -67}${goto 32}RM
${voffset 18}
${voffset 26}
${voffset -31}${goto 161}G
${image $HOME/.Conky/future_conky/pix/bg2c.png -p 1,261 -s 200x260}
${voffset 43}${goto 15}Fan Speed - Core Temp
${voffset 12}${goto 70}CPU FAN - 1
${voffset 11}${goto 77}CPU: ${cpu cpu0} %
${voffset 11}${goto 70}TOP FAN - 2
${voffset 12}${goto 28}RPM${goto 155}RPM
${voffset 21}${goto 42}${goto 168}
${voffset 0}${goto 72}Core Temps
${voffset 4}${goto 42}${goto 168}
${voffset 37}${goto 65} REAR FAN - 3
${voffset 11}${goto 85}${freq_g} GHz
${voffset 11}${goto 66} FRONT fAN - 8
${voffset 10}${goto 28}rpm${goto 155}rpm
${image $HOME/.Conky/future_conky/pix/bg2.png -p 1,512 -s 200x130}
${voffset 12}${goto 15}DISKs- MB Temp- CPU 5-8
${voffset 8}${goto 137}${cpugraph cpu5 7,52 FFFFFF FFFFcc -t}
${voffset 0}${goto 137}${cpugraph cpu6 7,52 FFFFFF FFFFcc -t}
${voffset 0}${goto 137}${cpugraph cpu7 7,52 FFFFFF FFFFcc -t}
${voffset 0}${goto 137}${cpugraph cpu8 7,52 FFFFFF FFFFcc -t}
${voffset -23}${goto 60}${fs_free /} : ${fs_size /}
${voffset 11}${goto 71}Free : Total
${voffset 11}${goto 65}${fs_free /home} : ${fs_size /home}
${voffset 14}${goto 10}sd a: ${diskio sda}${voffset -6}${goto 75}${diskiograph sda 12,56 FFFFFF FFFFcc -t}
${voffset 6}${goto 25}b: ${diskio sdb}${voffset -7}${goto 75}${diskiograph sdb 12,56 FFFFFF FFFFcc}
${voffset -67}${goto 33}fs
${voffset 18}
${voffset 26}
${voffset -31}${goto 157}MB
|
Zu: http://forum.ubuntuusers.de/topic/vorstellungsthread%3A-mein-ubuntu-desktop/1402/
|
pt1997
Anmeldungsdatum: 6. April 2014
Beiträge: 5
|
Hier ist mal meine conkyrc. Ich habe sie farbig eingeteilt, damit man besser zurecht kommt. Deswegen hier der Download als PDF. Bild:
https://drive.google.com/file/d/0B-lE26YG0uEGczU2cjFscjktbHc/edit?usp=sharing PDF (farbig markiert):
https://drive.google.com/file/d/0B-lE26YG0uEGbnRxd0RjM1hlaG8/edit?usp=sharing # * INFO
# änderbar
# wichtige Informationen (nach „# *“ suchen)
# nicht genutzt
#
# created by pt1997
#
# Use Xft?
use_xft yes
xftfont OFL Sorts Mill Goudy:size=8
xftalpha 0.8
text_buffer_size 2048
# Update interval in seconds
update_interval 1
# This is the number of times Conky will update before quitting.
# Set to zero to run forever.
total_run_times 0
# Create own window instead of using desktop (required in nautilus)
own_window yes
own_window_transparent yes
own_window_type override
own_window_class conky
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
background no
# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
# Minimum size of text area
minimum_size 180 0
#maximum_width 200
# Draw shades?
draw_shades no
# Draw outlines?
draw_outline no
# Draw borders around text
draw_borders no
# Stippled borders?
stippled_borders 0
# border margins
border_inner_margin 5
# border width
border_width 1
# Default colors and also border colors
default_color blue
default_shade_color black
default_outline_color black
own_window_colour black
color1 black
# Text alignment, other possible values are commented
#alignment top_left
alignment top_right
#alignment bottom_left
#alignment bottom_right
# Gap between borders of screen and text
# same thing as passing -x at command line
gap_x 35
gap_y 35
# Subtract file system buffers from used memory?
no_buffers yes
# set to yes if you want all text to be in uppercase
uppercase no
# number of cpu samples to average
# set to 1 to disable averaging
cpu_avg_samples 2
# number of net samples to average
# set to 1 to disable averaging
net_avg_samples 2
# Force UTF8? note that UTF8 support required XFT
override_utf8_locale yes
# Add spaces to keep things from moving about? This only affects certain objects.
use_spacer none
# * INFO
# änderbar
# wichtige Informationen (nach „# *“ suchen)
# nicht genutzt
#
TEXT
${font Goudy Bookletter 1911:style=Bold}SYSTEM${font} ${hr 2}
# ${alignc 17}${font Sniglet:size=16}googly${font}
# ${alignc}${font Comfortaa:size=10}fly, you fools${font}
${voffset 2}${font StyleBats:size=16} Ubuntu 12.04.4 LTS
${font StyleBats:size=16} CPU1: ${cpu cpu1}% ${alignr}${cpubar cpu1 8,60}
${font StyleBats:size=16} CPU2: ${cpu cpu2}% ${alignr}${cpubar cpu2 8,60}
${font StyleBats:size=16} RAM: $memperc% ${alignr}${membar 8,60}
${font StyleBats:size=16} SWAP: $swapperc% ${alignr}${swapbar 8,60}
# ${font Webdings:size=16} Battery: ${battery_percent BAT0}% ${alignr}${battery_bar 8,60
BAT0}
# ${font StyleBats:size=16}${font} Uptime: ${alignr}${uptime}
#
${font Goudy Bookletter 1911:style=Bold}TEMPERATUR${font} ${hr 2}
${font StyleBats:size=16} temp1:${alignr}${execi 1 sensors -A |grep '(low = -1.0°C, high =
+127.0°C) sensor = thermistor'|cut -c15-22}
${font StyleBats:size=16} temp3:${alignr}${execi 1 sensors -A |grep 'temp3:'|cut -c15-22}
${font StyleBats:size=16} Core 0:${alignr}${execi 1 sensors -A |grep 'Core 0'|cut -c15-22}
${font StyleBats:size=16} Core 1:${alignr}${execi 1 sensors -A |grep 'Core 1'|cut -c15-22}
${font StyleBats:size=16} Core 2:${alignr}${execi 1 sensors -A |grep 'Core 2'|cut -c15-22}
${font StyleBats:size=16} Core 3:${alignr}${execi 1 sensors -A |grep 'Core 3'|cut -c15-22}
# * sensors muss installiert sein (sudo apt-get install lm-sensors).
# http://wiki.ubuntuusers.de/Lm_sensors
# überprüfe, ob diese Einstellungen bei dir stimmen.
# http://wiki.ubuntuusers.de/grep
# http://wiki.ubuntuusers.de/cut
#
# ${font Goudy Bookletter 1911:style=Bold}HD${font} ${hr 2}
# ${voffset 4}${font Pie charts for maps:size=14} ${voffset -5}Root:
# ${voffset 4}${fs_used /}/${fs_size /} ${alignr}${fs_bar 8,60 /}
# ${font Pie charts for maps:size=14} ${voffset -5}Home:
# ${voffset 4}${fs_used /home}/${fs_size /home} ${alignr}${fs_bar 8,60 /home}
# ${font Pie charts for maps:size=14} ${voffset -5}7:
# ${voffset 4}${fs_used /mnt/7}/${fs_size /mnt/7} ${alignr}${fs_bar 8,60 /mnt/7}
#
#Down: ${downspeedf eth0} k/s ${offset 80}Up: ${upspeedf eth0} k/s
#${downspeedgraph eth0 32,120 efefef 171717 2} ${offset 40} ${upspeedgraph eth0 32,120 efefef
171717 2}
#
${font Goudy Bookletter 1911:style=Bold}NETZWERK${font} ${hr 2}
${voffset 4}${font PizzaDude Bullets:size=14} Up: ${upspeed wlan0} ${alignr}${upspeedgraph
wlan0 8,60 000000 000000}
${voffset 4}${font PizzaDude Bullets:size=14} Down: ${downspeed wlan0} ${alignr}$
{downspeedgraph wlan0 8,60 000000 000000}
${voffset 4}${font PizzaDude Bullets:size=14} Upload: ${alignr}${totalup wlan0}
${voffset 4}${font PizzaDude Bullets:size=14} Download: ${alignr}${totaldown wlan0}
${voffset 4}${font PizzaDude Bullets:size=14} Signal: ${wireless_link_qual wlan0}% ${alignr}$
{wireless_link_bar 8,60 wlan0}
${voffset 4}${font PizzaDude Bullets:size=14} Local Ip: ${alignr}${addr wlan0}
${voffset 4}${font PizzaDude Bullets:size=14} Globale Ip: ${alignr}${execi 30 wget
http://v4.ipv6-test.com/api/myip.php -q -O -}
#
${font Goudy Bookletter 1911:style=Bold}WETTER BODENSEE${font} ${hr 2}
${execi 60 wget -O/home/XXXX/.conky/XXXX.jpg
http://www.XXXX.com/XXXX/XXXX/XXXX.jpg}
# * Verzeichnis, in das du das Bild speichern willst + Internetadresse des Bildes
${image /home/XXXX/.conky/XXXX.jpg -p 25,595 -s 251x205 -n}
# * Name des Verzeichnis und des Bildes. -p = Position (x,y), -s = Größe.
# * Bereich unbedingt frei lassen, hier ist das Bild.
# ${font Goudy Bookletter 1911:style=Bold}MUSIC${font} ${hr 2}
# ${if_running mpd}
# $mpd_title
# $mpd_artist
# $mpd_album
# $mpd_status $mpd_elapsed/$mpd_length
# $endif
${font Goudy Bookletter 1911:style=Bold}PROZESSE${font size=12} ${hr 2}
NAME $alignr PID CPU
${top name 1} $alignr ${top pid 1} ${top cpu 1}
${top name 2} $alignr ${top pid 2} ${top cpu 2}
${top name 3} $alignr ${top pid 3} ${top cpu 3}
${top name 4} $alignr ${top pid 4} ${top cpu 4}
${top name 5} $alignr ${top pid 5} ${top cpu 5}
${top name 6} $alignr ${top pid 6} ${top cpu 6}
# ${font Goudy Bookletter 1911:style=Bold}WEATHER${font} ${hr 2}
# Location: ${execi 3600 conkyForecast --location=SZXX0033 --datatype=CN}
# Conditions: ${execi 3600 conkyForecast --location=SZXX0033 --datatype=CC}
# ${font ConkyWeather:size=36}${execi 3600 conkyForecast --location=SZXX0033
--datatype=WF}${font}
# Temp: ${execi 3600 conkyForecast --location=SZXX0033 --datatype=HT}
# Extended Forecast
# ${font ConkyWeather:size=36}${execi 3600 conkyForecast --startday=1 --endday=3
--location=SZXX0033 --datatype=WF}${font}
# ${execi 3600 conkyForecast --location=SZXX0033 --startday=1 --endday=3 --spaces=15
--datatype=HT}
# ${execi 3600 conkyForecast --location=SZXX0033 --startday=1 --endday=3 --spaces=5
--datatype=DW}
|
Andi1804
Anmeldungsdatum: 8. Mai 2009
Beiträge: 550
Wohnort: 21368 Dahlenburg (Niedersachsen)
|
Gibt es auch einen Tag, mit dem man die Desktop-Version (Unity, XFCE oder so) anzeigen lasen kann? So eine Information fehlt mir noch in meiner Conky... Gruß Andi1804
- Bilder
|
Developer92
Anmeldungsdatum: 31. Dezember 2008
Beiträge: 4101
|
Andi1804 schrieb: Gibt es auch einen Tag, mit dem man die Desktop-Version (Unity, XFCE oder so) anzeigen lasen kann? So eine Information fehlt mir noch in meiner Conky...
Es gibt die Environment-Variable „XDG_SESSION_DESKTOP“, darin steht die verwendete Benutzeroberfläche. Diese kann man auswerten bzw. anzeigen lassen. Edit: pt1997 schrieb: Hier ist mal meine conkyrc. Ich habe sie farbig eingeteilt, damit man besser zurecht kommt. Deswegen hier der Download als PDF.
Tipp: Viele Editoren können Syntax-Highlighting, d.h. der Text wird automatisch farbig formatiert. Wäre an dieser Stelle zu empfehlen.
|