Hallo,
nach einem Reboot mounted meine 2. Festplatte (Datensicherung) nicht mehr. Fehlermeldung:
Error mounting system-managed device /dev/sdb1: Command-line `mount "/mnt/6509-D18E"' exited with non-zero exit status 32: mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so
Zuvor habe ich versucht, mit Hilfe der Laufwerksverwaltung genau diese Festplatte automatisch beim Start einzuhängen. (Da hatte ich die rot markierte Checkbox im Bild angewählt).
Hier die Ausgaben für:
cat /etc/fstab mount sudo parted -l
benu@PC2013:~$ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda3 during installation UUID=dd7ae541-c64e-4d15-96c9-a0baa57a066b / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda1 during installation UUID=71d8e876-5a3c-466d-8c5a-c177e876e5cb /boot ext4 defaults 0 2 # /home was on /dev/sda5 during installation UUID=9525ab35-1b7c-4ef6-8758-89fa34c224ca /home ext4 defaults 0 2 # /var was on /dev/sda4 during installation UUID=b653ed05-9844-45e5-bb61-8baac957f3e8 /var ext4 defaults 0 2 # swap was on /dev/sda2 during installation UUID=505289a6-9c06-4a10-b7be-37902fc17817 none swap sw 0 0 /dev/disk/by-uuid/6509-D18E /mnt/6509-D18E auto nosuid,nodev,nofail,x-gvfs-show,noauto 0 0 benu@PC2013:~$
benu@PC2013:~$ mount /dev/sda3 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/cgroup type tmpfs (rw) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755) none on /sys/fs/pstore type pstore (rw) /dev/sda1 on /boot type ext4 (rw) /dev/sda4 on /var type ext4 (rw) /dev/sda5 on /home type ext4 (rw) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd) gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=benu) benu@PC2013:~$
benu@PC2013:~$ sudo parted -l [sudo] password for benu: Modell: ATA WDC WD25EZRX-00M (scsi) Festplatte /dev/sda: 2500GB Sektorgröße (logisch/physisch): 512B/4096B Partitionstabelle: gpt Nummer Anfang Ende Größe Dateisystem Name Flags 1 17,4kB 500MB 500MB ext4 msftdata 2 500MB 8692MB 8192MB linux-swap(v1) 3 8692MB 29,2GB 20,5GB ext4 msftdata 4 29,2GB 33,3GB 4096MB ext4 msftdata 5 33,3GB 2500GB 2467GB ext4 msftdata Modell: ATA SAMSUNG HD103SI (scsi) Festplatte /dev/sdb: 1000GB Sektorgröße (logisch/physisch): 512B/512B Partitionstabelle: msdos Nummer Anfang Ende Größe Typ Dateisystem Flags 1 32,3kB 1000GB 1000GB primary fat32 LBA benu@PC2013:~$
Zuguterletzt das manuelle Mounten:
benu@PC2013:~$ sudo mount /dev/sdb1 /mnt [sudo] password for benu: benu@PC2013:~$
Im Nautilus kann ich jetzt die Inhalte der Platte unter "/mnt" anzeigen. Allerdings ist der Plattenname (ehem. "Intensio") verschwunden und ich kann "natürlich" nicht mehr per Mausklick auf den neu erschienenen "Namen" 6509-D18E den Platteninhalt anzeigen lassen.
Wenn ich
sudo umount /mnt
ausführe, dann erscheint zwar wieder der Plattenname, aber auch die alte Fehlermeldung.
Was kann ich als nächstes tun?
Viele Grüße...