sappy
Anmeldungsdatum: 24. Januar 2012
Beiträge: 282
|
Hi, ganz verzweifelt und in der Hoffnung doch noch was retten zu können mach ich mal den Beitrag auf. Ich habe gerade keine Ahnung was ich jetzt alles an Infos posten soll. Könnte alles sein. Ich werde fehlende Infos sofort nachliefern, wenn benötigt.
Kurzum das Problem: Gestern blieb mir mein Windows hängen, es wurde alles sehr langsam. Dann fror alles ein. Beim Neustart bleibt Windows hängen. Abgesicherter Modus geht auch nicht mehr.
Habe dann mit voller Hoffnung Ubuntu gestartet über den Bootloader, damit ich so meine Windows Daten noch retten kann. Da kam ich auch rein. Dann blieb er auch da hängen. Anschließen Ubuntu erweiterte Startoptionen gewählt. Dann "Ubuntu, with Linux 3.13.0-44-generic (recovery mode)" gewählt. Dann laufen eine Reihe von Statusinformationen durch, die ich leider nicht alle aufschreiben kann. Könnte später aber über Live CD starten und die Kernel-Infos auslesen.
Nach dem ganzen Meldungen sieht es mir nach einer Reihe von fehlerhaften Sektoren auf der HDD aus. Hier mal ein paar der Infos, bevor er stoppt: [sda] Unhandled sense code
Sense Key: Medium Error [current]
Add. Sense: Unrecovered read error - auto reallocate failed
end_request: I/O error, dev sda, sector 551906160
ata1: EH complete
EXT4-fs error (device sda6): __ext4_get_inode_loc:3953: inode #2491629: block 9961582: comm init: unable to read itable block
init: Failed to spawn startpar-bridge (friendly-recovery--stopped
main process: unable to execute: Input/output error Zum Rechner: Acer Aspire 8730G, Dual Boot System: Ubuntu 12.04 + Windows Vista, 32bit, GRUB Bootloader Version 2.02 Bevor ich da jetzt mit Live CD und e2fsck oder smartmontools irgendwas mache und noch mehr kaputt mache, warte ich erstmal was ihr dazu sagt. LG sappy
Moderiert von tomtomtom: Datenrettungsfrage ins Datenrettungsforum verschoben.
|
alteseisen
Anmeldungsdatum: 29. April 2012
Beiträge: 35
|
Das hört sich wirklich nicht gut an, es scheint, das die platte wirklich auf dem weg in die ewigen Jagdgründe ist.
In einem solchen Fall würde ich versuchen, mit der Live-CD zu starten und als allerserstes versuchen möglichst viele Daten von der Festplatte auf eine USB-Platte / ggf. Stick zu kopieren, bevor man den Versuch startet mit einem Programm die Festplatte zu "retten". Wenn eine Platte solch schweren Fehler produziert hilft meistens auch das beste Tool nichts mehr, die ist wohl einfach reif für das Nirwana.
Hoffe du kannst wenigstens die wichtigsten Dokumente noch retten. LG
alteseisen
|
sappy
(Themenstarter)
Anmeldungsdatum: 24. Januar 2012
Beiträge: 282
|
Hab Live CD an und wollte das Dateisystem "ACER" einhängen. Dann kommt folgendes: Error mounting: mount exited with exit code 13: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Failed to read NTFS $Bitmap:Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware.
In the first case run chkdsk /f on Windows then reboot into Windows twice.
The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/directory,(e.g. /dev/mapper/nvidia_eahaabcc1).
Please see the 'dmraid' documentation for more details. Vielleicht eine kleine Hoffnung: Ich hatte auf Windows partitioniert. Das Volume hat 78,1 GB. Dort liegen rund 50GB Daten. An die scheine ich von der Live CD ranzukommen. LG sappy
|
alteseisen
Anmeldungsdatum: 29. April 2012
Beiträge: 35
|
drücke die Daumen. Gibt es die Möglichkeit, die Festplatte auszubauen und über einen USB-IDE-Adapter an einem zweiten Rechner auszulesen ? Das wäre auch noch eine Möglichkeit. LG alteseisen
|
Hans9876543210
Anmeldungsdatum: 2. Januar 2011
Beiträge: 3741
|
sappy schrieb: Hab Live CD an und wollte das Dateisystem "ACER" einhängen. Dann kommt folgendes:
Das Volume hat 78,1 GB. Dort liegen rund 50GB Daten. An die scheine ich von der Live CD ranzukommen.
Also ich würde an deiner Stelle versuchen, von der Platte ein Image anzulegen und die Platte nur read only einzuhängen. Siehe dazu gddrescue. Danach würde ich chkdsk laufen lassen:
sappy schrieb: In the first case run chkdsk /f on Windows then reboot into Windows twice.
|
sappy
(Themenstarter)
Anmeldungsdatum: 24. Januar 2012
Beiträge: 282
|
Ok, hatte gestern mit den ACER-Betriebsprogrammen ein Startup Repair gestartet (ich schätze das ist nichts anderes als eim chkdsk mit Oberfläche!?). Dieses lief ca. 8 Stunden. Danach konnte ich immer noch nicht Win oder Ubuntu starten.
Danach wieder Live CD: und dann das Unfassbare: ich konnte die ACER Partition (/dev/sda2) einhängen! Konnte auf alles zugreifen was ich brauchte. Habe meine 2 Ordner sichern könne auf eine externe Platte. GParted konnte ich heute auch wieder starten, was vorher nicht gelang. Ich habe euch mal das Bild angehangen von den Partitionen und der kaputten ACER Partition.
Nun wäre das Ziel die Mühle doch noch wieder in Gange zu bringen. Risiko besteht ja nicht mehr, da Daten alle gesichert.
Was ich überhaupt nicht verstehe: die Linux Partitionen sind ja alle OK. Warum startet er mein Ubuntu dann auch nicht!? UPDATE: eben ein WinStart versucht; dann hat StartUp Repair weitere Fix-Versuche unternommen. Anschließend konnte ich Windows starten. Lg sappy
- Bilder
|
Hans9876543210
Anmeldungsdatum: 2. Januar 2011
Beiträge: 3741
|
Hi, siehe Festplattenstatus. Prüfe: | sudo apt-get install smartmontools
sudo smartctl -t short /dev/sda && sleep 3m && sudo smartctl -a /dev/sda
|
|
sappy
(Themenstarter)
Anmeldungsdatum: 24. Januar 2012
Beiträge: 282
|
Hallo, hier die Ausgabe von smartctl: | sudo smartctl -t short /dev/sda && sleep 3m && sudo smartctl -a /dev/sda
|
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Short self-test routine immediately in off-line mode".
Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 2 minutes for test to complete.
Test will complete after Sun Feb 8 16:18:54 2015
Use smartctl -X to abort test.
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-23-generic-pae] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Scorpio Blue Serial ATA
Device Model: WDC WD3200BEVT-22ZCT0
Serial Number: WD-WXEY08PR7124
LU WWN Device Id: 5 0014ee 056584584
Firmware Version: 11.01A11
User Capacity: 320.072.933.376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sun Feb 8 16:19:54 2015 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 9960) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 118) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 187 184 021 Pre-fail Always - 1641
4 Start_Stop_Count 0x0032 094 094 000 Old_age Always - 6488
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 077 077 000 Old_age Always - 16925
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 094 094 000 Old_age Always - 6309
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 108
193 Load_Cycle_Count 0x0032 123 123 000 Old_age Always - 232968
194 Temperature_Celsius 0x0022 107 070 000 Old_age Always - 40
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 190 190 000 Old_age Always - 538
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0009 100 253 051 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 16840 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 16840 occurred at disk power-on lifetime: 16925 hours (705 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 c0 96 6f 40 Error: WP at LBA = 0x006f96c0 = 7313088
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 10 18 90 37 57 01 00 00:54:05.956 WRITE FPDMA QUEUED
61 08 20 e8 38 97 01 00 00:54:05.955 WRITE FPDMA QUEUED
61 08 18 68 8b 89 08 00 00:54:05.955 WRITE FPDMA QUEUED
60 40 c0 c0 96 6f 01 00 00:54:05.955 READ FPDMA QUEUED
61 10 68 90 37 57 01 00 00:54:05.955 WRITE FPDMA QUEUED
Error 16839 occurred at disk power-on lifetime: 16925 hours (705 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 c0 96 6f 40 Error: WP at LBA = 0x006f96c0 = 7313088
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 08 68 0b 16 f4 07 00 00:54:02.410 WRITE FPDMA QUEUED
61 08 58 03 16 f4 07 00 00:54:02.410 WRITE FPDMA QUEUED
61 08 50 58 a3 6e 13 00 00:54:02.410 WRITE FPDMA QUEUED
61 08 48 fb 15 f4 07 00 00:54:02.410 WRITE FPDMA QUEUED
61 08 40 f3 15 f4 07 00 00:54:02.410 WRITE FPDMA QUEUED
Error 16838 occurred at disk power-on lifetime: 16925 hours (705 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 c0 96 6f 40 Error: WP at LBA = 0x006f96c0 = 7313088
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 08 48 18 12 08 14 00 00:53:58.939 WRITE FPDMA QUEUED
61 08 28 28 91 6b 13 00 00:53:58.939 WRITE FPDMA QUEUED
61 08 20 08 5b 08 02 00 00:53:58.939 WRITE FPDMA QUEUED
61 08 10 e8 38 97 01 00 00:53:58.938 WRITE FPDMA QUEUED
61 01 40 d0 15 f4 07 00 00:53:58.938 WRITE FPDMA QUEUED
Error 16837 occurred at disk power-on lifetime: 16925 hours (705 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 c0 96 6f 40 Error: WP at LBA = 0x006f96c0 = 7313088
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 08 18 68 48 dd 02 00 00:53:55.390 WRITE FPDMA QUEUED
60 08 d0 00 f4 34 02 00 00:53:55.366 READ FPDMA QUEUED
61 08 30 e0 38 97 01 00 00:53:55.366 WRITE FPDMA QUEUED
61 80 28 00 10 09 0b 00 00:53:55.366 WRITE FPDMA QUEUED
60 01 20 f8 a3 0b 0f 00 00:53:55.366 READ FPDMA QUEUED
Error 16836 occurred at disk power-on lifetime: 16925 hours (705 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 c0 96 6f 40 Error: WP at LBA = 0x006f96c0 = 7313088
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 80 a0 b8 3c 53 0b 00 00:53:51.749 WRITE FPDMA QUEUED
61 80 98 c0 03 59 0b 00 00:53:51.748 WRITE FPDMA QUEUED
61 00 90 c0 02 59 0b 00 00:53:51.747 WRITE FPDMA QUEUED
61 00 88 c0 01 59 0b 00 00:53:51.747 WRITE FPDMA QUEUED
61 f0 80 90 f3 7e 0b 00 00:53:51.746 WRITE FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 16925 21904606
# 2 Short offline Completed: read failure 90% 16925 21904606
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
| sudo smartctl -i /dev/sda
|
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-23-generic-pae] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Scorpio Blue Serial ATA
Device Model: WDC WD3200BEVT-22ZCT0
Serial Number: WD-WXEY08PR7124
LU WWN Device Id: 5 0014ee 056584584
Firmware Version: 11.01A11
User Capacity: 320.072.933.376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sun Feb 8 16:25:21 2015 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
|
Hans9876543210
Anmeldungsdatum: 2. Januar 2011
Beiträge: 3741
|
Hi, bei den Smart Werten ist meines Erachtens:
197 Current_Pending_Sector 0x0032 190 190 000 Old_age Always - 538
ein Indikator, dass die Platte einen Knacks hat. Alarmierend finde ich daneben, dass der Kurztest nicht durchläuft. Ich persönlich würde diese Platte nicht mehr weiter verwenden.
|
sappy
(Themenstarter)
Anmeldungsdatum: 24. Januar 2012
Beiträge: 282
|
Hi, ich konnte meine Daten dann doch noch sichern. Es hat über Windows mit:
geklappt. Windows brauchte fast 1 Tage, aber dann konnte man wieder starten. Daten sind gerettet. Anschließend Rechner formatiert und alle OS neu raufgespielt.
Bisher funktioniert alles super. HD also doch noch intakt. LG sappy
|
HarryD
Anmeldungsdatum: 14. Juni 2006
Beiträge: 2686
Wohnort: Germany - BW
|
sappy schrieb: Bisher funktioniert alles super. HD also doch noch intakt.
Witzbold. Mache jetzt nochmal ne smart Abfrage. Ernsthaft.
|