Danke schön. Da geht was weiter:
eberhard@eberhard-P4i65G ~/Schreibtisch $ sudo mdadm --assemble --scan
[sudo] password for eberhard:
mdadm: /dev/md0 has been started with 1 drive (out of 2).
mdadm: /dev/md/1 has been started with 1 drive (out of 2).
eberhard@eberhard-P4i65G ~/Schreibtisch $ sudo pvdisplay
--- Physical volume ---
PV Name /dev/md1
VG Name md1_vg
PV Size 929,57 GiB / not usable 1,14 MiB
Allocatable yes (but full)
PE Size 2,00 MiB
Total PE 475938
Free PE 0
Allocated PE 475938
PV UUID 63NG2h-ukCj-z72f-X2DH-v8k0-osat-6AGic2
eberhard@eberhard-P4i65G ~/Schreibtisch $ sudo pvs
[sudo] password for eberhard:
PV VG Fmt Attr PSize PFree
/dev/md1 md1_vg lvm2 a-- 929,57g 0
eberhard@eberhard-P4i65G ~/Schreibtisch $ sudo vgs
VG #PV #LV #SN Attr VSize VFree
md1_vg 1 1 0 wz--n- 929,57g 0
eberhard@eberhard-P4i65G ~/Schreibtisch $ sudo vgdisplay
--- Volume group ---
VG Name md1_vg
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 2
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 1
Open LV 0
Max PV 0
Cur PV 1
Act PV 1
VG Size 929,57 GiB
PE Size 2,00 MiB
Total PE 475938
Alloc PE / Size 475938 / 929,57 GiB
Free PE / Size 0 / 0
VG UUID Kikqjl-Lzfu-bsue-Aqmh-o8D0-pOQy-0FnIKQ
eberhard@eberhard-P4i65G ~/Schreibtisch $ sudo lvs
LV VG Attr LSize Pool Origin Data% Move Log Copy% Convert
md1vol1 md1_vg -wi-a---- 929,57g
eberhard@eberhard-P4i65G ~/Schreibtisch $ sudo lvdisplay
--- Logical volume ---
LV Path /dev/md1_vg/md1vol1
LV Name md1vol1
VG Name md1_vg
LV UUID Mb8J4J-OwOM-r6sG-HXBl-sn2x-JU15-KD42l9
LV Write Access read/write
LV Creation host, time ,
LV Status available
# open 0
LV Size 929,57 GiB
Current LE 475938
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 252:0
Vielen Dank an Dich. Ich habe unter Rechner md0 und md1 Datenträger gefunden.
Und kann jetzt die Daten alle lesen.
Damit ich es das nächste Mal einfacher bedienen kann:
es gibt das grafische Werkzeug system-config-lvm mit dem Werkzeug
<Initialisiere blockorientiertes Gerät>.
Kann ich damit dasgleiche bewirken, ohne Terminal-Kommandos?
Gruß svgt