Hi all!
Ich such mich grad blöd im Netz, um meinen alten Scanner zum Laufen zu bekommen. Ein HP Scanjet 2200c an USB. Angeblich wird er von SANE komplett unterstützt.
lsusb findet ihn:
lsusb ... Bus 002 Device 005: ID 03f0:0605 Hewlett-Packard ScanJet 2200c ...
sane-find-scanner auch:
sascha@Wodan:~$ sane-find-scanner # sane-find-scanner will now attempt ... # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. could not open USB device 0x8087/0x8000 at 001:002: Access denied (insufficient permissions) could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions) could not open USB device 0x1d6b/0x0003 at 003:001: Access denied (insufficient permissions) could not open USB device 0x046d/0xc05a at 002:004: Access denied (insufficient permissions) could not open USB device 0x04f2/0xb43b at 002:003: Access denied (insufficient permissions) could not open USB device 0x8087/0x07dc at 002:002: Access denied (insufficient permissions) found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x0605 [HP ScanJet 2200C]) at libusb:002:005 could not open USB device 0x1d6b/0x0002 at 002:001: Access denied (insufficient permissions) # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. # You may want to run this program as root to find all devices. Once you # found the scanner devices, be sure to adjust access permissions as # necessary.
In die Gruppe "scanner" hab ich meinen User aufgenommen:
sascha@Wodan:/etc/sane.d$ cat /etc/group | grep scanner scanner:x:109:saned,sascha
Bei scanimage -L ist dann aber schon Schluß:
sascha@Wodan:~$ scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).
Mit sudo davor identisch.
Ich hab bei SANE gefunden, daß das sane-plustek Backend das Richtige ist. In meiner /etc/sane.d/dll.conf steht das als aktiv drin (und diverse hp-Teile):
sascha@Wodan:~$ cat /etc/sane.d/dll.conf # /etc/sane.d/dll.conf - Configuration file for the SANE dynamic backend loader # ... ... hp hp3900 hpsj5s hp3500 hp4200 hp5400 hp5590 hpljm1005 ... plustek #plustek_pp ...
Muß plustek_pp auch noch sein?
Und in /etc/sane.d ist die Konfiguration drin:
sascha@Wodan:~$ ls /etc/sane.d abaton.conf coolscan2.conf epson.conf kodakaio.conf nec.conf sceptre.conf u12.conf agfafocus.conf coolscan3.conf fujitsu.conf kodak.conf net.conf sharp.conf umax1220u.conf apple.conf coolscan.conf genesys.conf leo.conf p5.conf sm3840.conf umax.conf artec.conf dc210.conf gphoto2.conf lexmark.conf pie.conf snapscan.conf umax_pp.conf artec_eplus48u.conf dc240.conf gt68xx.conf ma1509.conf pixma.conf sp15c.conf v4l.conf avision.conf dc25.conf hp3900.conf magicolor.conf plustek.conf st400.conf xerox_mfp.conf bh.conf dell1600n_net.conf hp4200.conf matsushita.conf plustek_pp.conf stv680.conf canon630u.conf dll.conf hp5400.conf microtek2.conf qcam.conf tamarack.conf canon.conf dll.d hp.conf microtek.conf ricoh.conf teco1.conf canon_dr.conf dmc.conf hpsj5s.conf mustek.conf rts8891.conf teco2.conf canon_pp.conf epjitsu.conf hs2p.conf mustek_pp.conf s9036.conf teco3.conf cardscan.conf epson2.conf ibm.conf mustek_usb.conf saned.conf test.conf
In der plustek.conf steht nur ein
[usb]
drin, keine Vendor/Product ID oder Device. Ist es das? Kann ich mir das Device selbst aussuchen?
Scanlite hat schon mal den Scanner gefunden, dann aber Kommunikationsprobleme gemeldet. Jetzt sagt es nur noch stur:
Das SANE-System könnte (sic!) kein Scan-Gerät finden.
Ich soll die Scanner-Systemeinstellungen prüfen, finde aber bei den Systemeinstellungen keine Scanner.
Jetzt steh ich da wie der Ochs vorm Berg …
Kann mir jemand helfen? Danke schon mal!