Guten Morgen Benno-007,
ich habe Lubuntu 14.04.2 neu aufgespielt. Vorher habe ich die Festplatte gelöscht. Der REchner läuft wieder und nimmt auch Aktualisierungen wieder gut an und startet danach zügig. Anbei nun die Auflistung.
Mein Lapetop ist ein Panasonic CF 72. Ich habe es seit 2004 und mit Win XP prof gefahren. Vor drei Jahren komplett überholt. Neue Festplatte und Ram Speicher.
kunobunt@kunobunt-CF-72X3J04KG:~$ sudo dmidecode -t system
[sudo] password for kunobunt:
# dmidecode 2.12
SMBIOS 2.3 present.
Handle 0x0001, DMI type 1, 25 bytes
System Information
Manufacturer: Matsushita Electric Industrial Co.,Ltd.
Product Name: CF-72X3J04KG
Version: 005
Serial Number: 4BYAA01446
UUID: 00000000-0000-1000-8000-008045228F6C
Wake-up Type: Power Switch
Handle 0x0020, DMI type 12, 5 bytes
System Configuration Options
Option 1: Jumper settings can be described here.
Handle 0x0030, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
kunobunt@kunobunt-CF-72X3J04KG:~$ sudo hdparm -iI /dev/sda
/dev/sda:
Model=SAMSUNG HM160HC, FwRev=LQ100-10, SerialNo=S12TJ1MB835720
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=34902, SectSize=554, ECCbytes=4
BuffType=DualPortCache, BuffSize=8192kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=312581808
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: unknown setting WriteCache=enabled
Drive conforms to: ATA/ATAPI-7 T13 1532D revision 0: ATA/ATAPI-1,2,3,4,5,6,7
* signifies the current active mode
ATA device, with non-removable media
Model Number: SAMSUNG HM160HC
Serial Number: S12TJ1MB835720
Firmware Revision: LQ100-10
Transport: Parallel, ATA8-APT
Standards:
Used: ATA/ATAPI-7 T13 1532D revision 0
Supported: 8 7 6 5 & some of 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 312581808
Logical/Physical Sector size: 512 bytes
device size with M = 1024*1024: 152627 MBytes
device size with M = 1000*1000: 160041 MBytes (160 GB)
cache/buffer size = 8192 KBytes (type=DualPortCache)
Capabilities:
LBA, IORDY(can be disabled)
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: 254
Recommended acoustic management value: 254, current value: 0
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
* Advanced Power Management feature set
SET_MAX security extension
Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* 64-bit World wide name
* IDLE_IMMEDIATE with UNLOAD
* Write-Read-Verify feature set
* WRITE_UNCORRECTABLE_EXT command
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
* SMART Command Transport (SCT) feature set
* SCT Read/Write Long (AC1), obsolete
* SCT Write Same (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
Security:
supported
not enabled
not locked
frozen
not expired: security count
supported: enhanced erase
54min for SECURITY ERASE UNIT. 54min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 50f00000d2835720
NAA : 5
IEEE OUI : 0f0000
Unique ID : 0d2835720
HW reset results:
CBLID- above Vih
Device num = 1
Checksum: correct
kunobunt@kunobunt-CF-72X3J04KG:~$ sudo parted -l
Modell: ATA SAMSUNG HM160HC (scsi)
Festplatte /dev/sda: 160GB
Sektorgröße (logisch/physisch): 512B/512B
Partitionstabelle: msdos
Nummer Anfang Ende Größe Typ Dateisystem Flags
1 1049kB 159GB 159GB primary ext4 boot
2 159GB 160GB 803MB extended
5 159GB 160GB 803MB logical linux-swap(v1)
kunobunt@kunobunt-CF-72X3J04KG:~$ dpkg -l | grep grub
ii grub-common 2.02~beta2-9ubuntu1.3 i386 GRand Unified Bootloader (common files)
ii grub-gfxpayload-lists 0.6 i386 GRUB gfxpayload blacklist
ii grub-pc 2.02~beta2-9ubuntu1.3 i386 GRand Unified Bootloader, version 2 (PC/BIOS version)
ii grub-pc-bin 2.02~beta2-9ubuntu1.3 i386 GRand Unified Bootloader, version 2 (PC/BIOS binaries)
ii grub2-common 2.02~beta2-9ubuntu1.3 i386 GRand Unified Bootloader (common files for version 2)
kunobunt@kunobunt-CF-72X3J04KG:~$ sudo apt-get install --no-install-recommends smartmontools
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt:
thunderbird-locale-de thunderbird-locale-en
Verwenden Sie »apt-get autoremove«, um sie zu entfernen.
Vorgeschlagene Pakete:
gsmartcontrol smart-notifier
Empfohlene Pakete:
mailx mailutils
Die folgenden NEUEN Pakete werden installiert:
smartmontools
0 aktualisiert, 1 neu installiert, 0 zu entfernen und 11 nicht aktualisiert.
Es müssen 429 kB an Archiven heruntergeladen werden.
Nach dieser Operation werden 1.446 kB Plattenplatz zusätzlich benutzt.
Holen: 1 http://de.archive.ubuntu.com/ubuntu/ trusty/main smartmontools i386 6.2+svn3841-1.2 [429 kB]
Es wurden 429 kB in 1 s geholt (394 kB/s).
Vormals nicht ausgewähltes Paket smartmontools wird gewählt.
(Lese Datenbank ... 150233 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von .../smartmontools_6.2+svn3841-1.2_i386.deb ...
Entpacken von smartmontools (6.2+svn3841-1.2) ...
Trigger für ureadahead (0.100.0-16) werden verarbeitet ...
ureadahead will be reprofiled on next reboot
Trigger für man-db (2.6.7.1-1ubuntu1) werden verarbeitet ...
smartmontools (6.2+svn3841-1.2) wird eingerichtet ...
Trigger für ureadahead (0.100.0-16) werden verarbeitet ...
kunobunt@kunobunt-CF-72X3J04KG:~$ mount
/dev/sda1 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=kunobunt)
kunobunt@kunobunt-CF-72X3J04KG:~$
Beste Grüße
kunobunt