Guten Tag miteinander,
ich habe mir einen kleinen gebrauchten Rechner zugelegt, mit dem ich sehr zufrieden bin. Es handelt sich um einen HP Elitebook 2760p. Win 7 und Ubuntu habe ich als Dualbootsystem installiert. Dieses Gerät besitzt einen Touchscreen, der sich mit einem Finger bedienen lässt. Nun las ich, dass man solche brührungsempfindlichen Bildschirme auch mit mehreren Fingern bedienen kann. Daher erlaube ich mir folgende Fragen:
Ist Multitouch überhaupt mit meinem Gerät möglich?
Könnte mir dieser Artikel weiterhelfen?
Es grüßt freundlich
Klaus
Grafikkarte und verwendeter Treiber und Grafikkarte und verwendeter Treiber
klaus@minihape:~$ lspci -nnk | grep "VGA\|'Kern'\|3D\|Display" -A2 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) Subsystem: Hewlett-Packard Company Device [103c:162a] Kernel driver in use: i915 klaus@minihape:~$ xrandr --prop Screen 0: minimum 8 x 8, current 1280 x 800, maximum 32767 x 32767 LVDS1 connected primary 1280x800+0+0 (normal left inverted right x axis y axis) 261mm x 163mm EDID: 00ffffffffffff0009e5a00800000000 00140104951a10782a927590595a9026 1d505400000001010101010101010101 010101010101121b008a50200e301a16 220005a3100000190c12008a50200e30 1a16220005a310000019000000000000 00000000000000000000000000000002 001933ff1e3c96191422960000000002 BACKLIGHT: 20 range: (0, 20) Backlight: 20 range: (0, 20) scaling mode: Full aspect supported: None, Full, Center, Full aspect 1280x800 60.0*+ 40.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 640x400 60.0 DP1 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Automatic supported: Automatic, Full, Limited 16:235 audio: auto supported: force-dvi, off, auto, on HDMI1 disconnected (normal left inverted right x axis y axis) aspect ratio: Automatic supported: Automatic, 4:3, 16:9 Broadcast RGB: Automatic supported: Automatic, Full, Limited 16:235 audio: auto supported: force-dvi, off, auto, on VGA1 disconnected (normal left inverted right x axis y axis) VIRTUAL1 disconnected (normal left inverted right x axis y axis)
var/log/Xorg.0.log
[ 6.358] X.Org X Server 1.17.2 Release Date: 2015-06-16 [ 6.358] X Protocol Version 11, Revision 0 [ 6.358] Build Operating System: Linux 3.19.0-43-generic x86_64 Ubuntu [ 6.358] Current Operating System: Linux minihape 4.2.0-35-generic #40~14.04.1-Ubuntu SMP Fri Mar 18 16:37:35 UTC 2016 x86_64 [ 6.358] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-35-generic root=UUID=fd099e0e-6f1c-4045-ae59-c51c6ab29c8c ro quiet splash vt.handoff=7 [ 6.358] Build Date: 15 January 2016 10:17:33PM [ 6.358] xorg-server 2:1.17.2-1ubuntu9.1~trusty1 (For technical support please see http://www.ubuntu.com/support) [ 6.358] Current version of pixman: 0.30.2 [ 6.358] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 6.358] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 6.358] (==) Log file: "/var/log/Xorg.0.log", Time: Mon May 2 06:14:57 2016 [ 6.360] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 6.360] (==) No Layout section. Using the first Screen section. [ 6.360] (==) No screen section available. Using defaults. [ 6.360] (**) |-->Screen "Default Screen Section" (0) [ 6.360] (**) | |-->Monitor "<default monitor>" [ 6.360] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 6.360] (==) Automatically adding devices [ 6.360] (==) Automatically enabling devices [ 6.360] (==) Automatically adding GPU devices [ 6.360] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 6.360] Entry deleted from font path. [ 6.360] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 6.360] Entry deleted from font path. [ 6.360] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 6.360] Entry deleted from font path. [ 6.360] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 6.360] Entry deleted from font path. [ 6.360] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 6.360] Entry deleted from font path. [ 6.360] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 6.360] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 6.360] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 6.360] (II) Loader magic: 0x55a8bda23c80 [ 6.360] (II) Module ABI versions: [ 6.360] X.Org ANSI C Emulation: 0.4 [ 6.360] X.Org Video Driver: 19.0 [ 6.360] X.Org XInput driver : 21.0 [ 6.360] X.Org Server Extension : 9.0 [ 6.361] (II) xfree86: Adding drm device (/dev/dri/card0) [ 6.362] (--) PCI:*(0:0:2:0) 8086:0126:103c:162a rev 9, Mem @ 0xd4000000/4194304, 0xc0000000/268435456, I/O @ 0x00004000/64 [ 6.362] (II) LoadModule: "glx" [ 6.362] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 6.372] (II) Module glx: vendor="X.Org Foundation" [ 6.372] compiled for 1.17.2, module version = 1.0.0 [ 6.372] ABI class: X.Org Server Extension, version 9.0 [ 6.372] (==) AIGLX enabled [ 6.372] (==) Matched intel as autoconfigured driver 0 [ 6.372] (==) Matched intel as autoconfigured driver 1 [ 6.372] (==) Matched modesetting as autoconfigured driver 2 [ 6.372] (==) Matched fbdev as autoconfigured driver 3 [ 6.372] (==) Matched vesa as autoconfigured driver 4 [ 6.372] (==) Assigned the driver to the xf86ConfigLayout [ 6.372] (II) LoadModule: "intel" [ 6.373] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 6.374] (II) Module intel: vendor="X.Org Foundation" [ 6.374] compiled for 1.17.2, module version = 2.99.917 [ 6.374] Module class: X.Org Video Driver [ 6.374] ABI class: X.Org Video Driver, version 19.0 [ 6.374] (II) LoadModule: "modesetting" [ 6.374] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 6.374] (II) Module modesetting: vendor="X.Org Foundation" [ 6.374] compiled for 1.17.2, module version = 1.17.2 [ 6.374] Module class: X.Org Video Driver [ 6.374] ABI class: X.Org Video Driver, version 19.0 [ 6.374] (II) LoadModule: "fbdev" [ 6.374] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 6.374] (II) Module fbdev: vendor="X.Org Foundation" [ 6.374] compiled for 1.17.2, module version = 0.4.4 [ 6.374] Module class: X.Org Video Driver [ 6.374] ABI class: X.Org Video Driver, version 19.0 [ 6.374] (II) LoadModule: "vesa" [ 6.374] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 6.374] (II) Module vesa: vendor="X.Org Foundation" [ 6.374] compiled for 1.17.2, module version = 2.3.4 [ 6.374] Module class: X.Org Video Driver [ 6.374] ABI class: X.Org Video Driver, version 19.0 [ 6.374] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 6.374] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000 [ 6.374] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100 [ 6.374] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300 [ 6.374] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 6.374] (II) FBDEV: driver for framebuffer: fbdev [ 6.374] (II) VESA: driver for VESA chipsets: vesa [ 6.374] (++) using VT number 7 [ 6.375] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20150522 [ 6.375] (II) intel(0): SNA compiled: xserver-xorg-video-intel-lts-wily 2:2.99.917+git20150808-0ubuntu4~trusty2 (Adam Conrad <adconrad@ubuntu.com>) [ 6.375] (II) intel(0): SNA compiled for use with valgrind [ 6.375] (WW) Falling back to old probe method for modesetting [ 6.375] (WW) Falling back to old probe method for fbdev [ 6.375] (II) Loading sub module "fbdevhw" [ 6.375] (II) LoadModule: "fbdevhw" [ 6.375] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 6.375] (II) Module fbdevhw: vendor="X.Org Foundation" [ 6.375] compiled for 1.17.2, module version = 0.0.2 [ 6.375] ABI class: X.Org Video Driver, version 19.0 [ 6.375] (WW) Falling back to old probe method for vesa [ 6.375] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000 [ 6.375] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 2 threads [ 6.375] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 6.375] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 6.375] (==) intel(0): RGB weight 888 [ 6.375] (==) intel(0): Default visual is TrueColor [ 6.375] (II) intel(0): Output LVDS1 has no monitor section [ 6.388] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1 [ 6.388] (II) intel(0): Enabled output LVDS1 [ 6.388] (II) intel(0): Output VGA1 has no monitor section [ 6.388] (II) intel(0): Enabled output VGA1 [ 6.388] (II) intel(0): Output HDMI1 has no monitor section [ 6.388] (II) intel(0): Enabled output HDMI1 [ 6.388] (II) intel(0): Output DP1 has no monitor section [ 6.388] (II) intel(0): Enabled output DP1 [ 6.388] (--) intel(0): Using a maximum size of 256x256 for hardware cursors [ 6.388] (II) intel(0): Output VIRTUAL1 has no monitor section [ 6.388] (II) intel(0): Enabled output VIRTUAL1 [ 6.388] (--) intel(0): Output LVDS1 using initial mode 1280x800 on pipe 0 [ 6.388] (==) intel(0): TearFree disabled [ 6.388] (==) intel(0): DPI set to (96, 96) [ 6.388] (II) Loading sub module "dri2" [ 6.388] (II) LoadModule: "dri2" [ 6.388] (II) Module "dri2" already built-in [ 6.388] (II) Loading sub module "present" [ 6.388] (II) LoadModule: "present" [ 6.388] (II) Module "present" already built-in [ 6.388] (II) UnloadModule: "modesetting" [ 6.388] (II) Unloading modesetting [ 6.388] (II) UnloadModule: "fbdev" [ 6.388] (II) Unloading fbdev [ 6.388] (II) UnloadSubModule: "fbdevhw" [ 6.388] (II) Unloading fbdevhw [ 6.388] (II) UnloadModule: "vesa" [ 6.388] (II) Unloading vesa [ 6.388] (==) Depth 24 pixmap format is 32 bpp [ 6.388] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend [ 6.389] (==) intel(0): Backing store enabled [ 6.389] (==) intel(0): Silken mouse enabled [ 6.389] (II) intel(0): HW Cursor enabled [ 6.389] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 6.389] (==) intel(0): DPMS enabled [ 6.389] (==) intel(0): Display hotplug detection enabled [ 6.389] (II) intel(0): [DRI2] Setup complete [ 6.389] (II) intel(0): [DRI2] DRI driver: i965 [ 6.389] (II) intel(0): [DRI2] VDPAU driver: va_gl [ 6.389] (II) intel(0): direct rendering: DRI2 enabled [ 6.389] (II) intel(0): hardware support for Present enabled [ 6.389] (--) RandR disabled [ 6.398] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 6.398] (II) AIGLX: enabled GLX_ARB_create_context [ 6.398] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 6.398] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 6.398] (II) AIGLX: enabled GLX_INTEL_swap_event [ 6.398] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 6.398] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 6.398] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 6.398] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 6.398] (II) AIGLX: enabled GLX_ARB_create_context_robustness [ 6.398] (II) AIGLX: Loaded and initialized i965 [ 6.398] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 6.400] (II) intel(0): switch to mode 1280x800@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none [ 6.400] (II) intel(0): Setting screen physical size to 338 x 211 [ 6.405] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 6.406] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 6.406] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 6.406] (II) LoadModule: "evdev" [ 6.406] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 6.408] (II) Module evdev: vendor="X.Org Foundation" [ 6.408] compiled for 1.17.2, module version = 2.9.2 [ 6.408] Module class: X.Org XInput Driver [ 6.408] ABI class: X.Org XInput driver, version 21.0 [ 6.408] (II) Using input driver 'evdev' for 'Power Button' [ 6.408] (**) Power Button: always reports core events [ 6.408] (**) evdev: Power Button: Device: "/dev/input/event2" [ 6.408] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 6.408] (--) evdev: Power Button: Found keys [ 6.408] (II) evdev: Power Button: Configuring as keyboard [ 6.408] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 6.408] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 6.408] (**) Option "xkb_rules" "evdev" [ 6.408] (**) Option "xkb_model" "pc105" [ 6.408] (**) Option "xkb_layout" "de" [ 6.410] (II) XKB: reuse xkmfile /var/lib/xkb/server-808BBA3D4C227BDB44C370226C34E44C5D69A4A9.xkm [ 6.411] (II) config/udev: Adding input device Video Bus (/dev/input/event8) [ 6.411] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 6.411] (II) Using input driver 'evdev' for 'Video Bus' [ 6.411] (**) Video Bus: always reports core events [ 6.411] (**) evdev: Video Bus: Device: "/dev/input/event8" [ 6.411] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 6.411] (--) evdev: Video Bus: Found keys [ 6.411] (II) evdev: Video Bus: Configuring as keyboard [ 6.411] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input14/event8" [ 6.411] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 6.411] (**) Option "xkb_rules" "evdev" [ 6.411] (**) Option "xkb_model" "pc105" [ 6.411] (**) Option "xkb_layout" "de" [ 6.411] (II) config/udev: Adding input device Lid Switch (/dev/input/event1) [ 6.411] (II) No input driver specified, ignoring this device. [ 6.411] (II) This device may have been added with another device file. [ 6.411] (II) config/udev: Adding input device Sleep Button (/dev/input/event0) [ 6.411] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 6.411] (II) Using input driver 'evdev' for 'Sleep Button' [ 6.411] (**) Sleep Button: always reports core events [ 6.411] (**) evdev: Sleep Button: Device: "/dev/input/event0" [ 6.411] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 6.411] (--) evdev: Sleep Button: Found keys [ 6.411] (II) evdev: Sleep Button: Configuring as keyboard [ 6.411] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0" [ 6.411] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8) [ 6.411] (**) Option "xkb_rules" "evdev" [ 6.411] (**) Option "xkb_model" "pc105" [ 6.411] (**) Option "xkb_layout" "de" [ 6.412] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9) [ 6.412] (II) No input driver specified, ignoring this device. [ 6.412] (II) This device may have been added with another device file. [ 6.412] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event10) [ 6.412] (II) No input driver specified, ignoring this device. [ 6.412] (II) This device may have been added with another device file. [ 6.412] (II) config/udev: Adding input device HDA Intel PCH Dock Line Out (/dev/input/event11) [ 6.412] (II) No input driver specified, ignoring this device. [ 6.412] (II) This device may have been added with another device file. [ 6.412] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12) [ 6.412] (II) No input driver specified, ignoring this device. [ 6.412] (II) This device may have been added with another device file. [ 6.412] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event13) [ 6.412] (II) No input driver specified, ignoring this device. [ 6.412] (II) This device may have been added with another device file. [ 6.413] (II) config/udev: Adding input device HP HD Webcam [Fixed] (/dev/input/event14) [ 6.413] (**) HP HD Webcam [Fixed]: Applying InputClass "evdev keyboard catchall" [ 6.413] (II) Using input driver 'evdev' for 'HP HD Webcam [Fixed]' [ 6.413] (**) HP HD Webcam [Fixed]: always reports core events [ 6.413] (**) evdev: HP HD Webcam [Fixed]: Device: "/dev/input/event14" [ 6.413] (--) evdev: HP HD Webcam [Fixed]: Vendor 0x4f2 Product 0xb242 [ 6.413] (--) evdev: HP HD Webcam [Fixed]: Found keys [ 6.413] (II) evdev: HP HD Webcam [Fixed]: Configuring as keyboard [ 6.413] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input20/event14" [ 6.413] (II) XINPUT: Adding extended input device "HP HD Webcam [Fixed]" (type: KEYBOARD, id 9) [ 6.413] (**) Option "xkb_rules" "evdev" [ 6.413] (**) Option "xkb_model" "pc105" [ 6.413] (**) Option "xkb_layout" "de" [ 6.413] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) [ 6.413] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 6.413] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 6.413] (**) AT Translated Set 2 keyboard: always reports core events [ 6.413] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3" [ 6.413] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 6.413] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 6.413] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 6.413] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3" [ 6.413] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10) [ 6.413] (**) Option "xkb_rules" "evdev" [ 6.413] (**) Option "xkb_model" "pc105" [ 6.413] (**) Option "xkb_layout" "de" [ 6.413] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event4) [ 6.413] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall" [ 6.413] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse' [ 6.413] (**) PS/2 Generic Mouse: always reports core events [ 6.413] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event4" [ 6.413] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1 [ 6.413] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons [ 6.413] (--) evdev: PS/2 Generic Mouse: Found relative axes [ 6.413] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes [ 6.413] (II) evdev: PS/2 Generic Mouse: Configuring as mouse [ 6.413] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5 [ 6.413] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 6.413] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event4" [ 6.413] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 11) [ 6.413] (II) evdev: PS/2 Generic Mouse: initialized for relative axes. [ 6.414] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1 [ 6.414] (**) PS/2 Generic Mouse: (accel) acceleration profile 0 [ 6.414] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000 [ 6.414] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4 [ 6.414] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0) [ 6.414] (II) No input driver specified, ignoring this device. [ 6.414] (II) This device may have been added with another device file. [ 6.414] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6) [ 6.414] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 6.414] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 6.414] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons" [ 6.414] (II) LoadModule: "synaptics" [ 6.414] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 6.414] (II) Module synaptics: vendor="X.Org Foundation" [ 6.414] compiled for 1.17.2, module version = 1.8.2 [ 6.414] Module class: X.Org XInput Driver [ 6.414] ABI class: X.Org XInput driver, version 21.0 [ 6.414] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 6.414] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 6.414] (**) Option "Device" "/dev/input/event6" [ 6.436] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device [ 6.436] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5932 (res 75) [ 6.436] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5164 (res 219) [ 6.436] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 6.436] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15 [ 6.436] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple [ 6.436] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 6.436] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 6.436] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 6.452] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input11/event6" [ 6.452] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12) [ 6.452] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 [ 6.452] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75 [ 6.452] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.034 [ 6.452] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 6.452] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 6.452] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 6.452] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 6.452] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 6.452] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1) [ 6.452] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates" [ 6.452] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0) [ 6.452] (II) No input driver specified, ignoring this device. [ 6.452] (II) This device may have been added with another device file. [ 6.453] (II) config/udev: Adding input device Serial Wacom Tablet WACf00e (/dev/ttyS4) [ 6.453] (**) Serial Wacom Tablet WACf00e: Applying InputClass "Wacom serial class" [ 6.453] (**) Serial Wacom Tablet WACf00e: Applying InputClass "Wacom serial class identifiers" [ 6.453] (II) LoadModule: "wacom" [ 6.453] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so [ 6.454] (II) Module wacom: vendor="X.Org Foundation" [ 6.454] compiled for 1.17.2, module version = 0.30.0 [ 6.454] Module class: X.Org XInput Driver [ 6.454] ABI class: X.Org XInput driver, version 21.0 [ 6.454] (II) wacom: Driver for Wacom graphics tablets: PenPartner, Graphire, Graphire2 4x5, Graphire2 5x7, Graphire3 4x5, Graphire3 6x8, Graphire4 4x5, Graphire4 6x8, BambooFun 4x5, BambooFun 6x8, Bamboo1 Medium, Graphire4 6x8 BlueTooth, CTL-460, CTH-461, CTL-660, CTL-461/S, Bamboo Touch, CTH-460/K, CTH-461/S, CTH-661/S1, CTH-461/L, CTH-661/L, Intuos 4x5, Intuos 6x8, Intuos 9x12, Intuos 12x12, Intuos 12x18, PTU600, PL400, PL500, PL600, PL600SX, PL550, PL800, PL700, PL510, PL710, DTI520, DTF720, DTF720a, DTF521, DTU1931, DTU2231, DTU1631, Intuos2 4x5, Intuos2 6x8, Intuos2 9x12, Intuos2 12x12, Intuos2 12x18, Intuos2 6x8 , Volito, PenStation, Volito2 4x5, Volito2 2x3, PenPartner2, Bamboo, Bamboo1, Bamboo1 4x6, Bamboo1 5x8, Intuos3 4x5, Intuos3 6x8, Intuos3 9x12, Intuos3 12x12, Intuos3 12x19, Intuos3 6x11, Intuos3 4x6, Intuos4 4x6, Intuos4 6x9, Intuos4 8x13, Intuos4 12x19, Intuos4 WL USB Endpoint, Intuos4 WL Bluetooth Endpoint, Intuos5 touch S, Intuos5 touch M, Intuos5 touch L, Intuos5 S, Intuos5 M, Intuos Pro S, Intuos Pro M, Intuos Pro L, Cintiq 21UX, Cintiq 20WSX, Cintiq 12WX, Cintiq 21UX2, Cintiq 24HD, Cintiq 22HD, Cintiq 24HD touch (EMR digitizer), Cintiq 13HD, DTK2241, DTH2242, Cintiq 22HDT, TabletPC 0x90, TabletPC 0x93, TabletPC 0x97, TabletPC 0x9A, CapPlus 0x9F, TabletPC 0xE2, TabletPC 0xE3, TabletPC 0xE5, TabletPC 0xE6, TabletPC 0xEC, TabletPC 0xED, TabletPC 0xEF, TabletPC 0x100, TabletPC 0x101, TabletPC 0x10D, TabletPC 0x116, TabletPC 0x12C, TabletPC 0x4001, TabletPC 0x4004, TabletPC 0x5000, TabletPC 0x5002, usb:172f:0024, usb:172f:0025, usb:172f:0026, usb:172f:0027, usb:172f:0028, usb:172f:0030, usb:172f:0031, usb:172f:0032, usb:172f:0033, usb:172f:0034, usb:172f:0035, usb:172f:0036, usb:172f:0037, usb:172f:0038, usb:172f:0039, usb:172f:0051, usb:172f:0052, usb:172f:0053, usb:172f:0054, usb:172f:0055, usb:172f:0056, usb:172f:0057, usb:172f:0058, usb:172f:0500, usb:172f:0501, usb:172f:0502, usb:172f:0503, usb:1b96:0001, usb:17ef:6004 [ 6.454] (II) Using input driver 'wacom' for 'Serial Wacom Tablet WACf00e' [ 6.454] (**) Serial Wacom Tablet WACf00e: always reports core events [ 6.454] (**) Option "Device" "/dev/ttyS4" [ 6.454] (**) Option "StopBits" "1" [ 6.454] (**) Option "DataBits" "8" [ 6.454] (**) Option "Parity" "None" [ 6.454] (**) Option "Vmin" "1" [ 6.454] (**) Option "Vtime" "10" [ 6.454] (**) Option "FlowControl" "Xoff" [ 6.454] (II) Serial Wacom Tablet WACf00e: type not specified, assuming 'stylus'. [ 6.454] (II) Serial Wacom Tablet WACf00e: other types will be automatically added. [ 6.966] (II) Serial Wacom Tablet WACf00e stylus: serial tablet id 0xE3. [ 6.966] (--) Serial Wacom Tablet WACf00e stylus: using pressure threshold of 27 for button 1 [ 6.966] (--) Serial Wacom Tablet WACf00e stylus: maxX=26312 maxY=16520 maxZ=255 resX=100000 resY=100000 tilt=disabled [ 6.966] (II) Serial Wacom Tablet WACf00e stylus: hotplugging dependent devices. [ 6.966] (EE) Serial Wacom Tablet WACf00e stylus: Invalid type 'cursor' for this device. [ 6.966] (EE) Serial Wacom Tablet WACf00e stylus: Invalid type 'pad' for this device. [ 6.966] (II) Serial Wacom Tablet WACf00e stylus: hotplugging completed. [ 6.966] (**) Option "config_info" "udev:/sys/devices/pnp0/00:04/tty/ttyS4" [ 6.966] (II) XINPUT: Adding extended input device "Serial Wacom Tablet WACf00e stylus" (type: STYLUS, id 13) [ 6.967] (**) Serial Wacom Tablet WACf00e stylus: (accel) keeping acceleration scheme 1 [ 6.967] (**) Serial Wacom Tablet WACf00e stylus: (accel) acceleration profile 0 [ 6.967] (**) Serial Wacom Tablet WACf00e stylus: (accel) acceleration factor: 2.000 [ 6.967] (**) Serial Wacom Tablet WACf00e stylus: (accel) acceleration threshold: 4 [ 6.967] (**) Option "BaudRate" "38400" [ 6.967] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event5) [ 6.967] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall" [ 6.967] (II) Using input driver 'evdev' for 'HP WMI hotkeys' [ 6.967] (**) HP WMI hotkeys: always reports core events [ 6.967] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event5" [ 6.967] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0 [ 6.967] (--) evdev: HP WMI hotkeys: Found keys [ 6.967] (II) evdev: HP WMI hotkeys: Configuring as keyboard [ 6.967] (**) Option "config_info" "udev:/sys/devices/virtual/input/input12/event5" [ 6.967] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 14) [ 6.967] (**) Option "xkb_rules" "evdev" [ 6.967] (**) Option "xkb_model" "pc105" [ 6.967] (**) Option "xkb_layout" "de" [ 6.970] (**) Serial Wacom Tablet WACf00e eraser: Applying InputClass "Wacom serial class" [ 6.970] (**) Serial Wacom Tablet WACf00e eraser: Applying InputClass "Wacom serial class identifiers" [ 6.970] (II) Using input driver 'wacom' for 'Serial Wacom Tablet WACf00e eraser' [ 6.970] (**) Serial Wacom Tablet WACf00e eraser: always reports core events [ 6.970] (**) Option "Device" "/dev/ttyS4" [ 6.970] (**) Option "Type" "eraser" [ 6.970] (**) Option "BaudRate" "38400" [ 6.970] (**) Option "StopBits" "1" [ 6.970] (**) Option "DataBits" "8" [ 6.970] (**) Option "Parity" "None" [ 6.970] (**) Option "Vmin" "1" [ 6.970] (**) Option "Vtime" "10" [ 6.970] (**) Option "FlowControl" "Xoff" [ 6.971] (--) Serial Wacom Tablet WACf00e eraser: maxX=26312 maxY=16520 maxZ=255 resX=100000 resY=100000 tilt=disabled [ 6.971] (**) Option "config_info" "udev:/sys/devices/pnp0/00:04/tty/ttyS4" [ 6.971] (II) XINPUT: Adding extended input device "Serial Wacom Tablet WACf00e eraser" (type: ERASER, id 15) [ 6.971] (**) Serial Wacom Tablet WACf00e eraser: (accel) keeping acceleration scheme 1 [ 6.971] (**) Serial Wacom Tablet WACf00e eraser: (accel) acceleration profile 0 [ 6.971] (**) Serial Wacom Tablet WACf00e eraser: (accel) acceleration factor: 2.000 [ 6.971] (**) Serial Wacom Tablet WACf00e eraser: (accel) acceleration threshold: 4 [ 6.971] (**) Serial Wacom Tablet WACf00e touch: Applying InputClass "Wacom serial class" [ 6.971] (**) Serial Wacom Tablet WACf00e touch: Applying InputClass "Wacom serial class identifiers" [ 6.971] (II) Using input driver 'wacom' for 'Serial Wacom Tablet WACf00e touch' [ 6.971] (**) Serial Wacom Tablet WACf00e touch: always reports core events [ 6.971] (**) Option "Device" "/dev/ttyS4" [ 6.971] (**) Option "Type" "touch" [ 6.971] (**) Option "BaudRate" "38400" [ 6.971] (**) Option "StopBits" "1" [ 6.971] (**) Option "DataBits" "8" [ 6.971] (**) Option "Parity" "None" [ 6.971] (**) Option "Vmin" "1" [ 6.971] (**) Option "Vtime" "10" [ 6.971] (**) Option "FlowControl" "Xoff" [ 6.971] (--) Serial Wacom Tablet WACf00e touch: maxX=2640 maxY=1630 maxZ=255 resX=10000 resY=10000 [ 6.971] (**) Option "config_info" "udev:/sys/devices/pnp0/00:04/tty/ttyS4" [ 6.971] (II) XINPUT: Adding extended input device "Serial Wacom Tablet WACf00e touch" (type: TOUCH, id 16) [ 6.971] (**) Serial Wacom Tablet WACf00e touch: (accel) keeping acceleration scheme 1 [ 6.971] (**) Serial Wacom Tablet WACf00e touch: (accel) acceleration profile 0 [ 6.971] (**) Serial Wacom Tablet WACf00e touch: (accel) acceleration factor: 2.000 [ 6.971] (**) Serial Wacom Tablet WACf00e touch: (accel) acceleration threshold: 4 [ 7.184] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event7) [ 7.184] (II) No input driver specified, ignoring this device. [ 7.184] (II) This device may have been added with another device file. [ 7.319] (II) intel(0): EDID vendor "BOE", prod id 2208 [ 7.319] (II) intel(0): Printing DDC gathered Modelines: [ 7.319] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1306 1328 1418 800 802 804 814 -hsync -vsync (48.9 kHz eP) [ 7.319] (II) intel(0): Modeline "1280x800"x0.0 46.20 1280 1306 1328 1418 800 802 804 814 -hsync -vsync (32.6 kHz e) [ 20.366] (II) XKB: reuse xkmfile /var/lib/xkb/server-81907AB388B478D711E6423DD8B0048239BE0CB6.xkm [ 20.380] (II) XKB: reuse xkmfile /var/lib/xkb/server-81907AB388B478D711E6423DD8B0048239BE0CB6.xkm [ 21.059] (II) XKB: reuse xkmfile /var/lib/xkb/server-A237F4D5ECC0A2998042D3B58D9A7CE5E820BA0E.xkm [ 3961.294] (II) config/udev: Adding input device RAPOO RAPOO 5G Wireless Device (/dev/input/event16) [ 3961.294] (**) RAPOO RAPOO 5G Wireless Device: Applying InputClass "evdev pointer catchall" [ 3961.294] (**) RAPOO RAPOO 5G Wireless Device: Applying InputClass "evdev keyboard catchall" [ 3961.294] (II) Using input driver 'evdev' for 'RAPOO RAPOO 5G Wireless Device' [ 3961.294] (**) RAPOO RAPOO 5G Wireless Device: always reports core events [ 3961.294] (**) evdev: RAPOO RAPOO 5G Wireless Device: Device: "/dev/input/event16" [ 3961.312] (--) evdev: RAPOO RAPOO 5G Wireless Device: Vendor 0x24ae Product 0x2001 [ 3961.312] (--) evdev: RAPOO RAPOO 5G Wireless Device: Found 9 mouse buttons [ 3961.312] (--) evdev: RAPOO RAPOO 5G Wireless Device: Found scroll wheel(s) [ 3961.312] (--) evdev: RAPOO RAPOO 5G Wireless Device: Found relative axes [ 3961.312] (--) evdev: RAPOO RAPOO 5G Wireless Device: Found x and y relative axes [ 3961.312] (--) evdev: RAPOO RAPOO 5G Wireless Device: Found absolute axes [ 3961.312] (II) evdev: RAPOO RAPOO 5G Wireless Device: Forcing absolute x/y axes to exist. [ 3961.312] (--) evdev: RAPOO RAPOO 5G Wireless Device: Found keys [ 3961.312] (II) evdev: RAPOO RAPOO 5G Wireless Device: Configuring as mouse [ 3961.312] (II) evdev: RAPOO RAPOO 5G Wireless Device: Configuring as keyboard [ 3961.312] (II) evdev: RAPOO RAPOO 5G Wireless Device: Adding scrollwheel support [ 3961.312] (**) evdev: RAPOO RAPOO 5G Wireless Device: YAxisMapping: buttons 4 and 5 [ 3961.312] (**) evdev: RAPOO RAPOO 5G Wireless Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 3961.312] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:24AE:2001.0002/input/input22/event16" [ 3961.312] (II) XINPUT: Adding extended input device "RAPOO RAPOO 5G Wireless Device" (type: KEYBOARD, id 17) [ 3961.312] (**) Option "xkb_rules" "evdev" [ 3961.312] (**) Option "xkb_model" "pc105" [ 3961.312] (**) Option "xkb_layout" "de" [ 3961.313] (II) evdev: RAPOO RAPOO 5G Wireless Device: initialized for relative axes. [ 3961.313] (WW) evdev: RAPOO RAPOO 5G Wireless Device: ignoring absolute axes. [ 3961.314] (**) RAPOO RAPOO 5G Wireless Device: (accel) keeping acceleration scheme 1 [ 3961.314] (**) RAPOO RAPOO 5G Wireless Device: (accel) acceleration profile 0 [ 3961.314] (**) RAPOO RAPOO 5G Wireless Device: (accel) acceleration factor: 2.000 [ 3961.314] (**) RAPOO RAPOO 5G Wireless Device: (accel) acceleration threshold: 4 [ 3961.314] (II) config/udev: Adding input device RAPOO RAPOO 5G Wireless Device (/dev/input/event15) [ 3961.314] (**) RAPOO RAPOO 5G Wireless Device: Applying InputClass "evdev keyboard catchall" [ 3961.314] (II) Using input driver 'evdev' for 'RAPOO RAPOO 5G Wireless Device' [ 3961.315] (**) RAPOO RAPOO 5G Wireless Device: always reports core events [ 3961.315] (**) evdev: RAPOO RAPOO 5G Wireless Device: Device: "/dev/input/event15" [ 3961.315] (--) evdev: RAPOO RAPOO 5G Wireless Device: Vendor 0x24ae Product 0x2001 [ 3961.315] (--) evdev: RAPOO RAPOO 5G Wireless Device: Found keys [ 3961.315] (II) evdev: RAPOO RAPOO 5G Wireless Device: Configuring as keyboard [ 3961.315] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:24AE:2001.0001/input/input21/event15" [ 3961.315] (II) XINPUT: Adding extended input device "RAPOO RAPOO 5G Wireless Device" (type: KEYBOARD, id 18) [ 3961.315] (**) Option "xkb_rules" "evdev" [ 3961.315] (**) Option "xkb_model" "pc105" [ 3961.315] (**) Option "xkb_layout" "de" [ 3961.316] (II) config/udev: Adding input device RAPOO RAPOO 5G Wireless Device (/dev/input/mouse2) [ 3961.316] (II) No input driver specified, ignoring this device. [ 3961.316] (II) This device may have been added with another device file. [ 3961.335] (II) XKB: reuse xkmfile /var/lib/xkb/server-81907AB388B478D711E6423DD8B0048239BE0CB6.xkm