sudo parted --list
Model: ATA TOSHIBA THNSNX02 (scsi)
Disk /dev/sda: 24,0GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 538MB 537MB fat32 boot
2 538MB 794MB 256MB ext2
3 794MB 24,0GB 23,2GB
Model: ATA ST500LT012-9WS14 (scsi)
Disk /dev/sdb: 500GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 538MB 537MB fat32 boot
2 538MB 794MB 256MB ext2
3 794MB 500GB 499GB
Model: ST1000LM 014-1EJ164 (scsi)
Disk /dev/sdd: 1000GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 538MB 537MB fat32 boot
2 538MB 794MB 256MB ext2
3 794MB 1000GB 999GB
Error: /dev/mapper/luks-4db534eb-c047-4973-99b5-ed68d543ad01: unrecognised disk
label
Model: Linux device-mapper (linear) (dm)
Disk /dev/mapper/ubuntu--vg-swap_1: 8460MB
Sector size (logical/physical): 512B/4096B
Partition Table: loop
Number Start End Size File system Flags
1 0,00B 8460MB 8460MB linux-swap(v1)
Model: Linux device-mapper (linear) (dm)
Disk /dev/mapper/ubuntu--vg-root: 491GB
Sector size (logical/physical): 512B/4096B
Partition Table: loop
Number Start End Size File system Flags
1 0,00B 491GB 491GB ext4
Error: /dev/mapper/sdb3_crypt: unrecognised disk label
dmesg (ich hoffe es ist vollständig - ich kann im terminal auf jeden Fall nicht mehr weiter zurück scrollen - der Befehl selbst wird nicht mehr angezeigt - anders als im ersten Fall)
[ 1.058071] hub 3-0:1.0: 2 ports detected
[ 1.058321] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.058327] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.058341] ehci-pci 0000:00:1d.0: debug port 2
[ 1.062229] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.062244] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd1618000
[ 1.073857] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.073907] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.073909] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.073911] usb usb4: Product: EHCI Host Controller
[ 1.073913] usb usb4: Manufacturer: Linux 4.2.0-36-generic ehci_hcd
[ 1.073915] usb usb4: SerialNumber: 0000:00:1d.0
[ 1.074066] hub 4-0:1.0: USB hub found
[ 1.074073] hub 4-0:1.0: 2 ports detected
[ 1.074219] ehci-platform: EHCI generic platform driver
[ 1.074233] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.074240] ohci-pci: OHCI PCI platform driver
[ 1.074254] ohci-platform: OHCI generic platform driver
[ 1.074268] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.074335] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.079651] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.079657] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.079841] mousedev: PS/2 mouse device common for all mice
[ 1.080202] rtc_cmos 00:01: RTC can wake from S4
[ 1.080448] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.080488] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.080501] i2c /dev entries driver
[ 1.080600] device-mapper: uevent: version 1.0.3
[ 1.080750] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
[ 1.080771] Intel P-state driver initializing.
[ 1.080939] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.080951] EFI Variables Facility v0.08 2004-May-17
[ 1.090918] PCCT header not found.
[ 1.091190] NET: Registered protocol family 10
[ 1.091646] NET: Registered protocol family 17
[ 1.091661] Key type dns_resolver registered
[ 1.092359] Loading compiled-in X.509 certificates
[ 1.093606] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.094213] Loaded X.509 cert 'Build time autogenerated kernel key: 88c2a3e9923be7846a02954d3dcfd246b2c2079a'
[ 1.094233] registered taskstats version 1
[ 1.094263] zswap: loading zswap
[ 1.094265] zswap: using zbud pool
[ 1.094270] zswap: using lzo compressor
[ 1.096783] Key type trusted registered
[ 1.100703] Key type encrypted registered
[ 1.100714] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.100719] ima: No TPM chip found, activating TPM-bypass!
[ 1.100752] evm: HMAC attrs: 0x1
[ 1.101213] Magic number: 4:955:166
[ 1.101318] rtc_cmos 00:01: setting system clock to 2016-06-08 07:10:45 UTC (1465369845)
[ 1.101393] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.101394] EDD information not available.
[ 1.101518] PM: Hibernation image not present or could not be loaded.
[ 1.101897] Freeing unused kernel memory: 1472K (ffffffff81d39000 - ffffffff81ea9000)
[ 1.101899] Write protecting the kernel read-only data: 12288k
[ 1.102146] Freeing unused kernel memory: 212K (ffff8800027cb000 - ffff880002800000)
[ 1.102241] Freeing unused kernel memory: 280K (ffff880002bba000 - ffff880002c00000)
[ 1.116495] systemd-udevd[122]: starting version 204
[ 1.131928] wmi: Mapper loaded
[ 1.151087] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.151100] r8169 0000:09:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.151792] [drm] Initialized drm 1.1.0 20060810
[ 1.152103] r8169 0000:09:00.0 eth0: RTL8106e at 0xffffc90000c7a000, 7c:05:07:df:9b:4d, XID 04900000 IRQ 28
[ 1.154046] ahci 0000:00:1f.2: version 3.0
[ 1.169972] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode
[ 1.169980] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.198682] AVX version of gcm_enc/dec engaged.
[ 1.198686] AES CTR mode by8 optimization enabled
[ 1.201053] scsi host0: ahci
[ 1.201303] scsi host1: ahci
[ 1.202290] scsi host2: ahci
[ 1.206127] scsi host3: ahci
[ 1.206737] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[ 1.206816] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[ 1.206901] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[ 1.207167] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[ 1.207172] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[ 1.207199] checking generic (c0000000 410000) vs hw (a0000000 10000000)
[ 1.207202] checking generic (c0000000 410000) vs hw (b0000000 2000000)
[ 1.207248] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[ 1.209299] scsi host4: ahci
[ 1.209473] scsi host5: ahci
[ 1.209567] ata1: SATA max UDMA/133 abar m2048@0xd1617000 port 0xd1617100 irq 29
[ 1.209570] ata2: DUMMY
[ 1.209573] ata3: DUMMY
[ 1.209575] ata4: DUMMY
[ 1.209578] ata5: SATA max UDMA/133 abar m2048@0xd1617000 port 0xd1617300 irq 29
[ 1.209579] ata6: DUMMY
[ 1.212273] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0d7000a2
[ 1.212279] nouveau [ DEVICE][0000:01:00.0] Chipset: GF117 (NVD7)
[ 1.212283] nouveau [ DEVICE][0000:01:00.0] Family : NVC0
[ 1.234376] nouveau [ VBIOS][0000:01:00.0] using image from ACPI
[ 1.234565] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 1.234571] nouveau [ VBIOS][0000:01:00.0] version 75.17.55.00.04
[ 1.234990] nouveau [ VBIOS][0000:01:00.0] running init tables
[ 1.317340] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 1.317395] nouveau W[ PFB][0000:01:00.0][0x00000000] reclocking of this ram type unsupported
[ 1.317398] nouveau [ PFB][0000:01:00.0] RAM type: DDR3
[ 1.317400] nouveau [ PFB][0000:01:00.0] RAM size: 1024 MiB
[ 1.317402] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
[ 1.348556] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 1.348573] nouveau [ PTHERM][0000:01:00.0] internal sensor: no
[ 1.348628] nouveau [ CLK][0000:01:00.0] 07: core 270 MHz memory 405 MHz
[ 1.348640] nouveau [ CLK][0000:01:00.0] 0f: core 775 MHz memory 1001 MHz
[ 1.348794] nouveau [ CLK][0000:01:00.0] --: core 270 MHz memory 324 MHz
[ 1.353779] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[ 1.353873] [TTM] Zone kernel: Available graphics memory: 4026016 kiB
[ 1.353875] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.353876] [TTM] Initializing pool allocator
[ 1.353882] [TTM] Initializing DMA pool allocator
[ 1.353894] nouveau [ DRM] VRAM: 1024 MiB
[ 1.353896] nouveau [ DRM] GART: 1048576 MiB
[ 1.353900] nouveau W[ DRM] Pointer to TMDS table invalid
[ 1.353902] nouveau [ DRM] DCB version 4.0
[ 1.353904] nouveau W[ DRM] Pointer to flat panel table invalid
[ 1.361805] nouveau [ DRM] MM: using COPY0 for buffer copies
[ 1.361814] [drm] Initialized nouveau 1.2.2 20120801 for 0000:01:00.0 on minor 0
[ 1.362473] [drm] Memory usable by graphics device = 2048M
[ 1.362480] checking generic (c0000000 410000) vs hw (c0000000 10000000)
[ 1.362483] fb: switching to inteldrmfb from EFI VGA
[ 1.362526] Console: switching to colour dummy device 80x25
[ 1.362760] [drm] Replacing VGA console driver
[ 1.369589] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.369592] [drm] Driver supports precise vblank timestamp query.
[ 1.369637] vga_switcheroo: enabled
[ 1.369710] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.369773] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.385775] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.390940] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 1.391137] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 1.391143] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20150619/psargs-359)
[ 1.391150] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.PEGP.DD02._BCL] (Node ffff8802568e0a50), AE_NOT_FOUND (20150619/psparse-536)
[ 1.391313] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:36/LNXVIDEO:00/input/input6
[ 1.392412] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.392423] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 1.392598] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
[ 1.392722] [drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 1
[ 1.453812] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[ 1.471139] fbcon: inteldrmfb (fb0) is primary device
[ 1.471253] Console: switching to colour frame buffer device 170x48
[ 1.471285] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.471288] i915 0000:00:02.0: registered panic notifier
[ 1.484320] usb 1-4: New USB device found, idVendor=058f, idProduct=6366
[ 1.484325] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.484328] usb 1-4: Product: Flash Card Reader/Writer
[ 1.484330] usb 1-4: Manufacturer: Generic
[ 1.484332] usb 1-4: SerialNumber: 058F63666485
[ 1.488393] usb-storage 1-4:1.0: USB Mass Storage device detected
[ 1.488565] scsi host6: usb-storage 1-4:1.0
[ 1.488685] usbcore: registered new interface driver usb-storage
[ 1.490348] usbcore: registered new interface driver uas
[ 1.502349] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.502354] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.502710] hub 3-1:1.0: USB hub found
[ 1.502906] hub 3-1:1.0: 6 ports detected
[ 1.518477] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.518481] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.518987] hub 4-1:1.0: USB hub found
[ 1.519172] hub 4-1:1.0: 6 ports detected
[ 1.529762] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.529787] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.529967] ata1.00: ATA-9: TOSHIBA THNSNX024GMNT, XTXAN105, max UDMA/100
[ 1.529972] ata1.00: 46905264 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.530347] ata1.00: configured for UDMA/100
[ 1.530544] scsi 0:0:0:0: Direct-Access ATA TOSHIBA THNSNX02 N105 PQ: 0 ANSI: 5
[ 1.530617] ata5.00: ATA-8: ST500LT012-9WS142, 0001LVM1, max UDMA/133
[ 1.530620] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.530811] sd 0:0:0:0: [sda] 46905264 512-byte logical blocks: (24.0 GB/22.3 GiB)
[ 1.530848] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.530885] sd 0:0:0:0: [sda] Write Protect is off
[ 1.530890] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.530921] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.531358] ata5.00: configured for UDMA/133
[ 1.531493] scsi 4:0:0:0: Direct-Access ATA ST500LT012-9WS14 LVM1 PQ: 0 ANSI: 5
[ 1.531733] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.531738] sd 4:0:0:0: [sdb] 4096-byte physical blocks
[ 1.531793] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 1.531854] sd 4:0:0:0: [sdb] Write Protect is off
[ 1.531858] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.531896] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.532347] sda: sda1 sda2 sda3
[ 1.532663] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.566366] sdb: sdb1 sdb2 sdb3
[ 1.567157] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 1.773720] usb 3-1.1: new high-speed USB device number 3 using ehci-pci
[ 1.874790] usb 3-1.1: New USB device found, idVendor=5986, idProduct=0295
[ 1.874795] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.874798] usb 3-1.1: Product: Lenovo EasyCamera
[ 1.874800] usb 3-1.1: Manufacturer: Vimicro corp.
[ 1.945618] usb 3-1.4: new full-speed USB device number 4 using ehci-pci
[ 2.013587] tsc: Refined TSC clocksource calibration: 1795.920 MHz
[ 2.013593] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19e31b7216c, max_idle_ns: 440795249889 ns
[ 2.042210] usb 3-1.4: New USB device found, idVendor=8087, idProduct=07da
[ 2.042214] usb 3-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.132386] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input5
[ 2.486634] scsi 6:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 4
[ 2.487260] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 2.488220] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 3.013506] clocksource: Switched to clocksource tsc
[ 7.823923] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[ 7.824072] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[ 7.824079] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[ 11.515376] random: nonblocking pool is initialized
[ 34.522675] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 44.240913] Adding 8261628k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-1 extents:1 across:8261628k FS
[ 44.404307] systemd-udevd[485]: starting version 204
[ 44.545534] lp: driver loaded but no devices found
[ 44.552386] ppdev: user-space parallel port driver
[ 44.627209] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 44.651791] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150619/utaddress-254)
[ 44.651803] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 44.651808] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
[ 44.651816] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150619/utaddress-254)
[ 44.651823] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 44.651825] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
[ 44.651831] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150619/utaddress-254)
[ 44.651838] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 44.651840] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
[ 44.651846] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150619/utaddress-254)
[ 44.651852] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 44.651855] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 44.688372] Intel(R) Wireless WiFi driver for Linux
[ 44.688375] Copyright(c) 2003- 2015 Intel Corporation
[ 44.688540] iwlwifi 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 44.696776] Bluetooth: Core ver 2.20
[ 44.696803] NET: Registered protocol family 31
[ 44.696806] Bluetooth: HCI device and connection manager initialized
[ 44.696811] Bluetooth: HCI socket layer initialized
[ 44.696815] Bluetooth: L2CAP socket layer initialized
[ 44.696824] Bluetooth: SCO socket layer initialized
[ 44.708865] usbcore: registered new interface driver btusb
[ 44.815598] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input8
[ 44.821258] intel_rapl: Found RAPL domain package
[ 44.821264] intel_rapl: Found RAPL domain core
[ 44.821268] intel_rapl: Found RAPL domain uncore
[ 44.821277] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 44.858626] audit: type=1400 audit(1465369889.264:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=589 comm="apparmor_parser"
[ 44.858634] audit: type=1400 audit(1465369889.264:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=589 comm="apparmor_parser"
[ 44.858639] audit: type=1400 audit(1465369889.264:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=589 comm="apparmor_parser"
[ 44.859369] audit: type=1400 audit(1465369889.264:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=589 comm="apparmor_parser"
[ 44.859380] audit: type=1400 audit(1465369889.264:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=589 comm="apparmor_parser"
[ 44.859396] audit: type=1400 audit(1465369889.264:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=590 comm="apparmor_parser"
[ 44.859408] audit: type=1400 audit(1465369889.264:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=590 comm="apparmor_parser"
[ 44.859416] audit: type=1400 audit(1465369889.264:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=590 comm="apparmor_parser"
[ 44.859757] audit: type=1400 audit(1465369889.264:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=589 comm="apparmor_parser"
[ 44.860110] audit: type=1400 audit(1465369889.268:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=590 comm="apparmor_parser"
[ 44.946947] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD95: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[ 44.946955] snd_hda_codec_idt hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 44.946959] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[ 44.946962] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
[ 44.946964] snd_hda_codec_idt hdaudioC0D0: inputs:
[ 44.946968] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0xe
[ 44.946973] snd_hda_codec_idt hdaudioC0D0: Mic=0xb
[ 44.964974] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 44.965104] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 44.965232] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 45.158457] iwlwifi 0000:08:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 45.184846] iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 45.184851] iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 45.184853] iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 45.184855] iwlwifi 0000:08:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
[ 45.184955] iwlwifi 0000:08:00.0: L1 Enabled - LTR Disabled
[ 45.209449] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 45.397551] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 45.498481] cfg80211: World regulatory domain updated:
[ 45.498485] cfg80211: DFS Master region: unset
[ 45.498487] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 45.498490] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 45.498492] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 45.498494] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 45.498496] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 45.498498] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 45.699901] media: Linux media interface: v0.10
[ 45.707624] Linux video capture interface: v2.00
[ 45.718299] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0295)
[ 45.719752] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input12
[ 45.719844] usbcore: registered new interface driver uvcvideo
[ 45.719846] USB Video Class driver (1.1.1)
[ 45.907898] EXT4-fs (sdb2): mounting ext2 file system using the ext4 subsystem
[ 45.944371] EXT4-fs (sdb2): mounted filesystem without journal. Opts: (null)
[ 47.017333] init: failsafe main process (856) killed by TERM signal
[ 47.719779] Bluetooth: RFCOMM TTY layer initialized
[ 47.719788] Bluetooth: RFCOMM socket layer initialized
[ 47.719795] Bluetooth: RFCOMM ver 1.11
[ 47.720119] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 47.720123] Bluetooth: BNEP filters: protocol multicast
[ 47.720128] Bluetooth: BNEP socket layer initialized
[ 48.108730] init: cups main process (929) killed by HUP signal
[ 48.108744] init: cups main process ended, respawning
[ 50.248417] iwlwifi 0000:08:00.0: L1 Enabled - LTR Disabled
[ 50.256076] iwlwifi 0000:08:00.0: Radio type=0x2-0x0-0x0
[ 50.510186] iwlwifi 0000:08:00.0: L1 Enabled - LTR Disabled
[ 50.517843] iwlwifi 0000:08:00.0: Radio type=0x2-0x0-0x0
[ 50.578569] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 51.427008] r8169 0000:09:00.0 eth0: link down
[ 51.427073] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 52.007957] wlan0: authenticate with 24:65:11:9f:fe:04
[ 52.012411] wlan0: send auth to 24:65:11:9f:fe:04 (try 1/3)
[ 52.015065] wlan0: authenticated
[ 52.017691] wlan0: associate with 24:65:11:9f:fe:04 (try 1/3)
[ 52.023366] wlan0: RX AssocResp from 24:65:11:9f:fe:04 (capab=0x431 status=0 aid=1)
[ 52.051968] wlan0: associated
[ 52.052074] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 52.055054] cfg80211: Regulatory domain changed to country: DE
[ 52.055058] cfg80211: DFS Master region: unset
[ 52.055059] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 52.055062] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 52.055064] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 52.055066] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
[ 52.055068] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm), (0 s)
[ 52.055070] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 53.781861] init: plymouth-upstart-bridge main process ended, respawning
[ 53.787456] init: plymouth-upstart-bridge main process (1503) terminated with status 1
[ 53.787472] init: plymouth-upstart-bridge main process ended, respawning
[ 58.819541] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[ 58.819714] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[ 58.819721] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[ 58.901763] init: anacron main process (1219) killed by TERM signal
[ 77.966226] audit_printk_skb: 168 callbacks suppressed
[ 77.966230] audit: type=1400 audit(1465369922.376:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2020 comm="apparmor_parser"
[ 77.966239] audit: type=1400 audit(1465369922.376:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2020 comm="apparmor_parser"
[ 77.966750] audit: type=1400 audit(1465369922.376:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2020 comm="apparmor_parser"
[ 355.855081] wlan0: AP 24:65:11:9f:fe:04 changed bandwidth, new config is 2417 MHz, width 2 (2427/0 MHz)
[ 356.776218] wlan0: AP 24:65:11:9f:fe:04 changed bandwidth, new config is 2417 MHz, width 1 (2417/0 MHz)
[ 357.800145] wlan0: AP 24:65:11:9f:fe:04 changed bandwidth, new config is 2417 MHz, width 2 (2427/0 MHz)
[ 439.324341] usb 1-1: new high-speed USB device number 3 using xhci_hcd
[ 439.454134] usb 1-1: New USB device found, idVendor=152d, idProduct=2336
[ 439.454144] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 439.454149] usb 1-1: Product: JM20336 SATA, USB Combo
[ 439.454153] usb 1-1: Manufacturer: JMicron
[ 439.454156] usb 1-1: SerialNumber: 770B88888888
[ 439.455632] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 439.455922] scsi host7: usb-storage 1-1:1.0
[ 440.452966] scsi 7:0:0:0: Direct-Access ST1000LM 014-1EJ164 PQ: 0 ANSI: 2 CCS
[ 440.453738] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 440.454545] sd 7:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 440.455804] sd 7:0:0:0: [sdd] Write Protect is off
[ 440.455829] sd 7:0:0:0: [sdd] Mode Sense: 00 38 00 00
[ 440.456313] sd 7:0:0:0: [sdd] Asking for cache data failed
[ 440.456322] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 440.471865] sdd: sdd1 sdd2 sdd3
[ 440.473716] sd 7:0:0:0: [sdd] Attached SCSI disk
[ 442.579279] EXT4-fs (sdd2): mounting ext2 file system using the ext4 subsystem
[ 442.583951] EXT4-fs (sdd2): warning: mounting unchecked fs, running e2fsck is recommended
[ 442.584837] EXT4-fs (sdd2): mounted filesystem without journal. Opts: (null)
[ 442.842433] systemd-hostnamed[2858]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 453.559911] wlan0: deauthenticating from 24:65:11:9f:fe:04 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 453.601902] cfg80211: World regulatory domain updated:
[ 453.601909] cfg80211: DFS Master region: unset
[ 453.601912] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 453.601916] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 453.601920] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 453.601923] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 453.601926] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 453.601929] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 455.462259] wlan0: authenticate with 24:65:11:9f:fe:04
[ 455.465341] wlan0: send auth to 24:65:11:9f:fe:04 (try 1/3)
[ 455.467786] wlan0: authenticated
[ 455.471158] wlan0: associate with 24:65:11:9f:fe:04 (try 1/3)
[ 455.479000] wlan0: RX AssocResp from 24:65:11:9f:fe:04 (capab=0x431 status=0 aid=1)
[ 455.487446] wlan0: associated
[ 455.490727] cfg80211: Regulatory domain changed to country: DE
[ 455.490733] cfg80211: DFS Master region: unset
[ 455.490735] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 455.490740] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 455.490744] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 455.490748] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
[ 455.490752] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm), (0 s)
[ 455.490755] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Vielen lieben Dank!