Mobman
Anmeldungsdatum: 13. September 2010
Beiträge: Zähle...
|
Guten Morgen, bisher lief im Büro alles über eine Windows-Domäne und mehrere Netzlaufwerke. Jetzt ist aber der neue Linux Server fertig und läuft sehr gut. Ein virtualisiertes Windows wird nur noch für die Drucker und eine spezielle Software gebraucht. Nun benötigen die Mitarbeiter mehrere Netzlaufwerke/Freigaben mit Lese- und Schreibrechten. Ich suche nach einer möglichst einfachen Konfiguration, mit der ich einfache Freigaben erstellen kann und acht Mitarbeiter jeweils Lese- und Schreibrechte bekommen können. Alle haben dieselben Rechte, jedoch sollen sie sich authentifizieren. Welche Schritte sind erforderlich? Gruppe "Mitarbeiter" erstellen Benutzer "Mitarbeiter 1" ... "Mitarbeiter 8" erstellen und die Mitarbeiter-Gruppen ID angeben Alle Benutzer der Samba Datenbank hinzufügen Alle Benutzer für Samba aktivieren Spezielle rekursive Ordnerrechte auf die gemounteten Ordner für die Gruppe "Mitarbeiter" geben Spezielle rekursive Besitzrechte auf die gemounteten Ordner für die Gruppe "Mitarbeiter" geben
Welche smb.conf wäre möglichst simpel aber effektiv? Danke und Grüße
|
Max-Ulrich_Farber
Anmeldungsdatum: 23. Januar 2007
Beiträge: 7990
|
Ich habe den Eindruck, im Wesentlichen hast Du Deine Fragen eigentlich schon selbst beantwortet; ich wüsste nicht, was es dazu noch an Wichtigem zu sagen gäbe (?). Welche smb.conf wäre möglichst simpel aber effektiv?
Am besten ist es immer, von der bei der Installation von Samba automatisch angelegten Standard-smb.conf auszugehen und daran nur so viel zu ändern, wie wirklich nötig ist. Dann kann bei Problemen leicht geholfen werden. Hilfsprogramme wie swat oder gadmin-samba, die komplett neue Dateien smb.conf anlegen, machen alles nur schwieriger. Man sollte sie deshalb lieber vermeiden. Gruß – Max-Ulrich
|
Mobman
(Themenstarter)
Anmeldungsdatum: 13. September 2010
Beiträge: 57
|
Danke. Ja das mit den smb.conf Problemen habe ich auch schon gelesen. Gestern hatte ich bereits eine Konfiguration getestet, aber ich bekam partout nicht die Möglichkeit von Windows einen Zugriff auf die Freigaben zu bekommen. Windows gab immer die Meldung das ich keine Berechtigung hätte. Wenn ich dann ins Samba Log geschaut habe, stand folgendes dort: 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18 | [2016/07/25 19:20:43.336048, 0] ../source3/param/loadparm.c:3259(process_usershare_file)
process_usershare_file: stat of /var/lib/samba/usershares/buer failed. Keine Berechtigung
[2016/07/25 19:20:43.337148, 0] ../source3/param/loadparm.c:3259(process_usershare_file)
process_usershare_file: stat of /var/lib/samba/usershares/buer failed. Datei oder Verzeichnis nicht gefunden
[2016/07/25 19:20:43.337946, 0] ../source3/param/loadparm.c:3259(process_usershare_file)
process_usershare_file: stat of /var/lib/samba/usershares/buer failed. Datei oder Verzeichnis nicht gefunden
[2016/07/25 19:21:31.990747, 0] ../source3/param/loadparm.c:3259(process_usershare_file)
process_usershare_file: stat of /var/lib/samba/usershares/buer failed. Keine Berechtigung
[2016/07/25 19:21:31.991532, 0] ../source3/param/loadparm.c:3259(process_usershare_file)
process_usershare_file: stat of /var/lib/samba/usershares/buer failed. Datei oder Verzeichnis nicht gefunden
[2016/07/25 19:21:31.992358, 0] ../source3/param/loadparm.c:3259(process_usershare_file)
process_usershare_file: stat of /var/lib/samba/usershares/buer failed. Datei oder Verzeichnis nicht gefunden
[2016/07/25 19:22:19.637626, 0] ../source3/param/loadparm.c:3259(process_usershare_file)
process_usershare_file: stat of /var/lib/samba/usershares/buer failed. Keine Berechtigung
[2016/07/25 19:22:19.638396, 0] ../source3/param/loadparm.c:3259(process_usershare_file)
process_usershare_file: stat of /var/lib/samba/usershares/buer failed. Datei oder Verzeichnis nicht gefunden
[2016/07/25 19:22:19.639166, 0] ../source3/param/loadparm.c:3259(process_usershare_file)
process_usershare_file: stat of /var/lib/samba/usershares/buer failed. Datei oder Verzeichnis nicht gefunden
|
buer gibt es aber nicht, sondern nur buero. Außerdem habe ich mit den /var/lib/samba/usershares/... Verzeichnissen bisher nichts zu tun gehabt. Was kann das sein?
|
seahawk1986
Anmeldungsdatum: 27. Oktober 2006
Beiträge: 11179
Wohnort: München
|
Mobman schrieb: buer gibt es aber nicht, sondern nur buero. Außerdem habe ich mit den /var/lib/samba/usershares/... Verzeichnissen bisher nichts zu tun gehabt. Was kann das sein?
Ein Tippfehler beim Freigegebenen Pfad in der smb.conf?
|
Mobman
(Themenstarter)
Anmeldungsdatum: 13. September 2010
Beiträge: 57
|
Eigentlich nicht. Hier die smb.conf. Unten stehen die eigenen Freigaben. 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314 | #
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
# - When such options are commented with ";", the proposed setting
# differs from the default Samba behaviour
# - When commented with "#", the proposed setting is the default
# behaviour of Samba but the option is considered important
# enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
#======================= Global Settings =======================
[global]
## Browsing/Identification ###
# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = UNSERE_ARBEITSGRUPPE
# server string is the equivalent of the NT Description field
server string = %h server (Samba, Ubuntu)
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
# wins support = no
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no
#### Networking ####
# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0
# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = yes
#### Debugging/Accounting ####
# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Cap the size of the individual log files (in KiB).
max log size = 1000
# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
# syslog only = no
# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0
# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d
####### Authentication #######
security = user
encrypt passwords = true
invalid users = root
# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
# Most people will want "standalone sever" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
server role = standalone server
# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
passdb backend = tdbsam
obey pam restrictions = yes
# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes
# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes
# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user
########## Domains ###########
#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set
#
# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
# logon path = \\%N\%U\profile
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
# logon home = \\%N\%U
# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd
# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.
# The following assumes a "machines" group exists on the system
; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.
; add group script = /usr/sbin/addgroup --force-badname %g
############ Misc ############
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m
# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap uid = 10000-20000
; idmap gid = 10000-20000
; template shell = /bin/bash
# Setup usershare options to enable non-root users to share folders
# with the net usershare command.
# Maximum number of usershare. 0 (default) means that usershare is disabled.
; usershare max shares = 100
# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
usershare allow guests = yes
#======================= Share Definitions =======================
# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
; comment = Home Directories
; browseable = no
# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
; read only = yes
# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
; create mask = 0700
# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
; directory mask = 0700
# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "username"
# can connect to \\server\username
# This might need tweaking when using external authentication schemes
; valid users = %S
# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; read only = yes
# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
; comment = Users profiles
; path = /home/samba/profiles
; guest ok = no
; browseable = no
; create mask = 0600
; directory mask = 0700
[printers]
comment = All Printers
browseable = yes
path = /var/spool/samba
printable = yes
guest ok = no
read only = yes
create mask = 0700
# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
browseable = yes
read only = yes
guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
; write list = root, @lpadmin
[Projekte]
path = /media/USER/Projekte
public = yes
guest ok = yes
writeable = yes
force user = net
force group = users
create mask = 0666
valid users = net
[Buero]
path = /media/USER/Buero
public = yes
guest ok = yes
writeable = yes
force user = net
force group = users
create mask = 0666
valid users = net
[Scan]
path = /media/USER/Scan
public = yes
guest ok = yes
writeable = yes
force user = net
force group = users
create mask = 0666
valid users = net
[IT]
path = /media/USER/IT
public = yes
guest ok = yes
writeable = yes
force user = net
force group = users
create mask = 0666
valid users = net
[E-Mail]
path = /media/USER/IT/E-Mail
public = yes
guest ok = yes
writeable = yes
force user = net
force group = users
create mask = 0666
valid users = net
|
|
seahawk1986
Anmeldungsdatum: 27. Oktober 2006
Beiträge: 11179
Wohnort: München
|
Und der Windows-Client versucht auch die richtige Freigabe anzusprechen (nicht dass auf dem Client "Buero" falsch geschrieben ist)?
|
Mobman
(Themenstarter)
Anmeldungsdatum: 13. September 2010
Beiträge: 57
|
- Bilder
|
Mobman
(Themenstarter)
Anmeldungsdatum: 13. September 2010
Beiträge: 57
|
Guten Morgen, das Problem mit den Samba Freigaben ist noch nicht gelöst. Bisher wurde noch Windows genutzt, nun soll aber die Umstellung folgen. Ich habe jeden Mitarbeiter unter Linux als Benutzer hinzugefügt und mit smdpasswd auch im Samba aktiviert Wenn ich ein Windows-Netzlaufwerk ohne Benutzerangaben verbinden möchte, klappt es, ich bekomme nur keinen Zugriff. Ein Netzlaufwerk MIT Benutzerangaben zu verbinden scheitert mit folgender Fehlermeldung:
Systemfehler 1219 aufgetreten. Mehrfache Verbindungen zu einem Server oder einer freigegebenen Ressource von de
mselben Benutzer unter Verwendung mehrerer Benutzernamen sind nicht zulässig. Tr
ennen Sie alle früheren Verbindungen zu dem Server bzw. der freigegebenen Ressou
rce, und versuchen Sie es erneut.
|
Max-Ulrich_Farber
Anmeldungsdatum: 23. Januar 2007
Beiträge: 7990
|
Mehrfache Verbindungen zu einem Server oder einer freigegebenen Ressource von de mselben Benutzer unter Verwendung mehrerer Benutzernamen sind nicht zulässig.
Ich gehe davon aus, dass Du von einem Windows-Client sprichst. Da ist es leider so. Wenn Du Dich schon einmal in einer Sitzung ohne Benutzerangaben mit dem Server verbunden hast, dann kannst Du es anschließend leider nicht mehr mit Benutzerangaben. Das ist eine Windows-Spezialität. Du benötigst auf dem Client einen Neustart bzw. eine Neuanmeldung.
|
Thomas_Do
Moderator
Anmeldungsdatum: 24. November 2009
Beiträge: 8528
|
Du kannst unter Windows aber den Server einmal per IP-Adresse ansprechen und einmal per Hostnamen (z.B. 192.168.3.45 und meinerechner). Falls Du mehr Verbindungen zum gleichen Server brauchst, kannst Du für den Server in der Hostdatei des Clients Aliase anlegen (meinrechner_1, meinrechner_2 etc.) und diese jeweils für eine Verbindung verwenden. Ist ein etwas "schmutziger" Workaround.
|