Hallo liebe Community!
Ich habe mir ein neues Notebook zugelegt (Acer Aspire v3-575G) und Ubuntu installiert. Läuft so weit alles Wunderbar, nur meine Maus (Logitch MX Master) lässt sich nicht finden, wenn ich mit Bluetooth Geräte suche (mit dem USB-Reciever klappt alles). Mein Handy kann ich ganz normal verbinden und unter Windows 10 funktioniert die Maus auch über Bluetooth, also schließe ich die Hardware mal aus.
Hier ein paar Daten zu meinem System:
(WLAN und Bluetooth sind zusammen in einem Modul)
thorsten@Aspire-V3-575G:~$ lspci | grep Atheros 03:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 32)
thorsten@Aspire-V3-575G:~$ rfkill list 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no 2: acer-bluetooth: Bluetooth Soft blocked: no Hard blocked: no 3: phy0: Wireless LAN Soft blocked: no Hard blocked: no
thorsten@Aspire-V3-575G:~$ dmesg | grep Bluetooth [ 11.936081] Bluetooth: Core ver 2.21 [ 11.936094] Bluetooth: HCI device and connection manager initialized [ 11.936097] Bluetooth: HCI socket layer initialized [ 11.936099] Bluetooth: L2CAP socket layer initialized [ 11.936104] Bluetooth: SCO socket layer initialized [ 12.543760] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.543762] Bluetooth: BNEP filters: protocol multicast [ 12.543765] Bluetooth: BNEP socket layer initialized [ 14.922031] Bluetooth: RFCOMM TTY layer initialized [ 14.922037] Bluetooth: RFCOMM socket layer initialized [ 14.922041] Bluetooth: RFCOMM ver 1.11
thorsten@Aspire-V3-575G:~$ dmesg | grep ath10k [ 12.090604] ath10k_pci 0000:03:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0 [ 12.396859] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/cal-pci-0000:03:00.0.bin failed with error -2 [ 14.720261] ath10k_pci 0000:03:00.0: qca6174 hw3.2 (0x05030000, 0x00340aff sub 11ad:0807) fw WLAN.RM.2.0-00180-QCARMSWPZ-1 fwapi 5 bdapi 2 htt-ver 3.26 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 features wowlan,ignore-otp,no-4addr-pad [ 14.720265] ath10k_pci 0000:03:00.0: debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [ 14.821431] ath10k_pci 0000:03:00.0 wlp3s0: renamed from wlan0
Hier hatte das QCA6174 anfänglich auch gemeckert, dass es Firmware nicht laden kann (auch error -2). Ich habe dann die firmware-4.bin in firmware-5.bin kopiert. Seit dem kommt die Zeile nicht mehr.
Dann gibt es bei dmesg noch einige andere Fehlermeldungen, bei denen ich nicht weiß, wie viel die mit meinem Problem zu tun haben:
thorsten@Aspire-V3-575G:~$ dmesg | grep failed [ 0.223626] platform MSFT0101:00: failed to claim resource 1 [ 0.223629] acpi MSFT0101:00: platform device creation failed: -16 [ 0.270391] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00080000 pref] [ 0.968011] nouveau: probe of 0000:01:00.0 failed with error -12 [ 10.934806] ata1: COMRESET failed (errno=-16) [ 11.830513] tpm_crb: probe of MSFT0101:00 failed with error -16 [ 12.396859] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/cal-pci-0000:03:00.0.bin failed with error -2 [ 12.397865] acer_wmi: Enabling Launch Manager failed: 0xe4 - 0x0
Hat jemand eine Idee, woran es liegt, dass die Maus nicht gefunden wird? Und noch besser einen Vorschlag, es zu beheben? Denkt bitte daran, dass ich Neuling bin und bei vielen Sachen noch nicht weiß, wie das funktioniert ☺
Vielen Dank schonmal für alle Mühen und Tipps!
Thorsten