Danke für die schnelle Hilfsbereitschaft.
Ich hoffe, dass ich es richtig gemacht habe, indem ich für jeden Punkt einen neuen Terminal benutzt habe.
Hier sind die Ausgaben:
"2. Welche Systemversion wird verwendet, welche Hardware ist verbaut und wurde die Netzwerkkarte überhaupt erkannt?"
samuel@SVF1521D6EW:~$ uname -a
Linux SVF1521D6EW 3.13.0-92-generic #139-Ubuntu SMP Tue Jun 28 20:42:26 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
samuel@SVF1521D6EW:~$ lspci -nnk | grep -i net -A2
07:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01)
Subsystem: Foxconn International, Inc. Device [105b:e071]
08:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader [10ec:5209] (rev 01)
--
0e:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c)
Subsystem: Sony Corporation Device [104d:90b8]
Kernel driver in use: r8169
samuel@SVF1521D6EW:~$ pccardctl info
samuel@SVF1521D6EW:~$ lsusb
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0bda:5729 Realtek Semiconductor Corp.
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
samuel@SVF1521D6EW:~$
samuel@SVF1521D6EW:~$ usb-devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 2
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=03.13
S: Manufacturer=Linux 3.13.0-92-generic ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:1a.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 4
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=8087 ProdID=0024 Rev=00.00
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=5729 Rev=00.15
S: Manufacturer=LOEB01339274F52
S: Product=Front Camera
S: SerialNumber=200901010001
C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo
I: If#= 1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 2
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=03.13
S: Manufacturer=Linux 3.13.0-92-generic ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:1d.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 4
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=8087 ProdID=0024 Rev=00.00
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 4
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=03.13
S: Manufacturer=Linux 3.13.0-92-generic xhci_hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:00:14.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=5000 MxCh= 4
D: Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1
P: Vendor=1d6b ProdID=0003 Rev=03.13
S: Manufacturer=Linux 3.13.0-92-generic xhci_hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:00:14.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
"3. Wie ist das Netzwerk konfiguriert?"
samuel@SVF1521D6EW:~$ cat /etc/network/interfaces
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
samuel@SVF1521D6EW:~$ cat /etc/resolv.conf
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
nameserver 127.0.1.1
search localdomain
samuel@SVF1521D6EW:~$ cat /etc/hosts
127.0.0.1 localhost
127.0.1.1 SVF1521D6EW
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
samuel@SVF1521D6EW:~$ ifconfig -a
eth0 Link encap:Ethernet Hardware Adresse 30:f9:ed:ab:3a:22
inet Adresse:192.168.1.10 Bcast:192.168.1.255 Maske:255.255.255.0
inet6-Adresse: fe80::32f9:edff:feab:3a22/64 Gültigkeitsbereich:Verbindung
UP BROADCAST RUNNING MULTICAST MTU:1500 Metrik:1
RX-Pakete:7084 Fehler:0 Verloren:0 Überläufe:0 Fenster:0
TX-Pakete:5233 Fehler:0 Verloren:0 Überläufe:0 Träger:0
Kollisionen:0 Sendewarteschlangenlänge:1000
RX-Bytes:7889648 (7.8 MB) TX-Bytes:676269 (676.2 KB)
lo Link encap:Lokale Schleife
inet Adresse:127.0.0.1 Maske:255.0.0.0
inet6-Adresse: ::1/128 Gültigkeitsbereich:Maschine
UP LOOPBACK RUNNING MTU:65536 Metrik:1
RX-Pakete:376 Fehler:0 Verloren:0 Überläufe:0 Fenster:0
TX-Pakete:376 Fehler:0 Verloren:0 Überläufe:0 Träger:0
Kollisionen:0 Sendewarteschlangenlänge:0
RX-Bytes:47801 (47.8 KB) TX-Bytes:47801 (47.8 KB)
samuel@SVF1521D6EW:~$ iwconfig
eth0 no wireless extensions.
lo no wireless extensions.
samuel@SVF1521D6EW:~$ route -n
Kernel-IP-Routentabelle
Ziel Router Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
192.168.1.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0
samuel@SVF1521D6EW:~$ arp -av
brakopp-VAIO (192.168.1.3) auf cc:af:78:d3:13:51 [ether] auf eth0
o2.box (192.168.1.1) auf 1c:74:0d:25:46:23 [ether] auf eth0
Einträge: 2 Ignoriert: 0 Gefunden: 2
samuel@SVF1521D6EW:~$ ip neigh show cat /var/lib/NetworkManager/NetworkManager.state
Error: an inet prefix is expected rather than "cat".
samuel@SVF1521D6EW:~$ cat /etc/NetworkManager/NetworkManager.conf cat /etc/udev/rules.d/70-persistent-net.rules | egrep -i 'device|sub' -A3
cat: cat: Datei oder Verzeichnis nicht gefunden
# PCI device 0x10ec:0x8168 (r8169)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="30:f9:ed:ab:3a:22", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# PCI device 0x14e4:0x4365 (wl)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="3c:77:e6:e4:b1:d9", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0"
"4. Wie weit funktioniert die Verbindung zum Internet?"
samuel@SVF1521D6EW:~$ ping -c 2 $(route -n | grep UG | awk {'print $2'})
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=0.488 ms
64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=0.894 ms
--- 192.168.1.1 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 999ms
rtt min/avg/max/mdev = 0.488/0.691/0.894/0.203 ms
samuel@SVF1521D6EW:~$ ping -c 2 www.ubuntuusers.de
PING ubuntuusers.de (213.95.41.4) 56(84) bytes of data.
64 bytes from ubuntuusers.de (213.95.41.4): icmp_seq=1 ttl=56 time=39.6 ms
64 bytes from ubuntuusers.de (213.95.41.4): icmp_seq=2 ttl=56 time=38.2 ms
--- ubuntuusers.de ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1001ms
rtt min/avg/max/mdev = 38.284/38.953/39.623/0.697 ms
samuel@SVF1521D6EW:~$ ping -c 2 213.95.41.4
"5. Ist WLAN eingeschaltet und welche Treibermodule werden verwendet"
samuel@SVF1521D6EW:~$ rfkill list
0: sony-wifi: Wireless LAN
Soft blocked: no
Hard blocked: no
1: sony-bluetooth: Bluetooth
Soft blocked: yes
Hard blocked: no
2: nfc0: NFC
Soft blocked: no
Hard blocked: no
samuel@SVF1521D6EW:~$ lsmod
Module Size Used by
btusb 32412 0
bnep 19624 2
rfcomm 69160 0
bluetooth 391136 11 bnep,btusb,rfcomm
binfmt_misc 17468 1
nls_iso8859_1 12713 1
snd_hda_codec_hdmi 46368 1
snd_hda_codec_realtek 65904 1
uvcvideo 80885 0
videobuf2_vmalloc 13216 1 uvcvideo
videobuf2_memops 13362 1 videobuf2_vmalloc
videobuf2_core 40664 1 uvcvideo
videodev 134688 2 uvcvideo,videobuf2_core
snd_hda_intel 56611 3
snd_hda_codec 193017 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 13602 1 snd_hda_codec
snd_pcm 102099 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
microread_mei 12811 0
microread 13420 1 microread_mei
snd_page_alloc 18710 2 snd_pcm,snd_hda_intel
mei_phy 13881 1 microread_mei
crc_ccitt 12707 1 microread
hci 44425 2 mei_phy,microread
nfc 95012 2 hci,microread
snd_seq_midi 13324 0
snd_seq_midi_event 14899 1 snd_seq_midi
snd_rawmidi 30731 1 snd_seq_midi
snd_seq 61616 2 snd_seq_midi_event,snd_seq_midi
intel_rapl 18773 0
x86_pkg_temp_thermal 14205 0
snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi
intel_powerclamp 14705 0
coretemp 13435 0
snd_timer 29549 2 snd_pcm,snd_seq
kvm 455843 0
crct10dif_pclmul 14289 0
crc32_pclmul 13113 0
cryptd 20359 0
joydev 17381 0
serio_raw 13462 0
snd 69416 17 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
i915 788212 4
drm_kms_helper 55071 1 i915
lpc_ich 21080 0
cfg80211 496328 0
rtsx_pci_ms 18151 0
drm 303102 5 i915,drm_kms_helper
memstick 16966 1 rtsx_pci_ms
soundcore 12680 1 snd
mei_me 18627 0
i2c_algo_bit 13413 1 i915
mei 82276 3 mei_phy,mei_me,microread_mei
shpchp 37032 0
sony_laptop 54219 0
video 19476 1 i915
mac_hid 13205 0
parport_pc 32701 0
ppdev 17671 0
lp 17759 0
parport 42348 3 lp,ppdev,parport_pc
rtsx_pci_sdmmc 23274 0
psmouse 106692 0
ahci 34091 3
libahci 32716 1 ahci
r8169 71677 0
mii 13934 1 r8169
rtsx_pci 46245 2 rtsx_pci_ms,rtsx_pci_sdmmc
"6. Eigenschaften der WLAN-Karte und Empfang"
samuel@SVF1521D6EW:~$ iwlist chan
eth0 no frequency information.
lo no frequency information.
samuel@SVF1521D6EW:~$ sudo iwlist scan
[sudo] password for samuel:
eth0 Interface doesn't support scanning.
lo Interface doesn't support scanning.
"7. Logbuchauzüge und Meldungen im Kernel-Puffer zeigen Fehler auf, auch bei kabelgebundenen Verbindungen"
samuel@SVF1521D6EW:~$ egrep -i 'net|eth|wlan|firm|reason' /var/log/syslog
samuel@SVF1521D6EW:~$ dmesg | egrep 'net|eth|sky|sun|sis|via|3c3|3c5|e100|8139|8169|acx|air|ath|atl|ar9|carl|atme|at7|herm|iwl|ipw|rtl8|r81|rt2|rt3|rt6|rt7|tg3|ssb|wl|b43|b44|ori|pri|p5|zd|ndis|wmi|ns8|FW'
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff8801cf200000 s81536 r8192 d20864 u262144
[ 0.000000] pcpu-alloc: s81536 r8192 d20864 u262144 alloc=1*2097152
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.017558] CPU0: Thermal monitoring enabled (TM1)
[ 0.817537] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.817896] audit: initializing netlink socket (disabled)
[ 0.864733] ACPI Error: Method parse/execution failed [\_TZ_.THRM.GPIR] (Node ffff8801c60e4a78), AE_NOT_FOUND (20131115/psparse-536)
[ 0.864739] ACPI Error: Method parse/execution failed [\_TZ_.THRM.ISTT] (Node ffff8801c60e4b18), AE_NOT_FOUND (20131115/psparse-536)
[ 0.864743] ACPI Error: Method parse/execution failed [\_TZ_.THRM.FTTF] (Node ffff8801c60e4910), AE_NOT_FOUND (20131115/psparse-536)
[ 0.864749] ACPI Error: Method parse/execution failed [\_TZ_.THRM._CRT] (Node ffff8801c60e4988), AE_NOT_FOUND (20131115/psparse-536)
[ 0.865832] ACPI Error: Method parse/execution failed [\_TZ_.THRM.GPIR] (Node ffff8801c60e4a78), AE_NOT_FOUND (20131115/psparse-536)
[ 0.865837] ACPI Error: Method parse/execution failed [\_TZ_.THRM.ISTT] (Node ffff8801c60e4b18), AE_NOT_FOUND (20131115/psparse-536)
[ 0.865841] ACPI Error: Method parse/execution failed [\_TZ_.THRM.FTTF] (Node ffff8801c60e4910), AE_NOT_FOUND (20131115/psparse-536)
[ 0.865846] ACPI Error: Method parse/execution failed [\_TZ_.THRM._CRT] (Node ffff8801c60e4988), AE_NOT_FOUND (20131115/psparse-536)
[ 0.866261] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.866263] ACPI: Thermal Zone [THRM] (47 C)
[ 0.870758] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.227134] Loaded X.509 cert 'Magrathea: Glacier signing key: 2a4800b94dc783d05326fae67b01b0beb73bb811'
[ 1.286075] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.286084] r8169 0000:0e:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.294100] r8169 0000:0e:00.0: irq 43 for MSI/MSI-X
[ 1.294299] r8169 0000:0e:00.0 eth0: RTL8168g/8111g at 0xffffc90000c64000, 30:f9:ed:ab:3a:22, XID 0c000800 IRQ 43
[ 1.294302] r8169 0000:0e:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 13.162772] Adding 6166524k swap on /dev/sda6. Priority:-1 extents:1 across:6166524k FS
[ 13.230541] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.168200] fbcon: inteldrmfb (fb0) is primary device
[ 18.052943] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.677544] r8169 0000:0e:00.0 eth0: link down
[ 20.677603] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.677930] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.718298] audit_printk_skb: 15 callbacks suppressed
[ 20.729071] type=1400 audit(1469784119.995:26): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=869 comm="apparmor_parser"
[ 48.192057] audit_printk_skb: 123 callbacks suppressed
[ 116.095301] r8169 0000:0e:00.0 eth0: link down
[ 116.095400] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5174.473323] r8169 0000:0e:00.0 eth0: link down
[ 5174.473422] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5177.433992] r8169 0000:0e:00.0 eth0: link up
[ 5177.434018] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready