Hallo Zusammen,
ich habe dasselbe Problem, der Canon P-208II funktioniert nicht. Habe alle unten beschriebenen Schritte von Ishinka befolgt, aber leider klappt es nicht. XSANE findet den Scanner nicht, Ausgabe von scanimage und sane-find-scanner und dmesg:
1 2 3 4 5 6 | sudo scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). |
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 | sudo sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. could not fetch string descriptor: Pipe error could not fetch string descriptor: Pipe error # No USB scanners found. If you expected something different, make sure that # you have loaded a kernel driver for your USB host controller and have setup # the USB system correctly. See man sane-usb for details. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. |
1 2 3 4 5 6 7 | dmesg [ 1047.427444] usb 3-2: New USB device found, idVendor=1083, idProduct=165f [ 1047.427453] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1047.427458] usb 3-2: Product: CANON P-208II [ 1047.427462] usb 3-2: Manufacturer: CANON [ 1047.427465] usb 3-2: SerialNumber: GZ424212 |
Hallo,
1. Driver: http://software.canon-europe.com/software/0045931.asp?model
2. If you have missing dependencies, additionally install: apt-get install libsane:i386 libusb-0.1-4:i386 libstdc++6:i386 libgcc1:i386 libc6:i386
3. edit canon_dr.conf:
sudo mcedit /etc/sane.d/canon_dr.conf
at the end of it add:
1 2 # P-208II usb 0x1083 0x165f4. Attach scanner, open it and start XSANE.
This is what lsusb command shows next to Canon P-208II scanner device: Bus 003 Device 006: ID 1083:165f Canon Electronics, Inc.