Hallo, ich bin neu in diesem Forum! Genau die Frage von Vincent... beschäftigt mich auch!! Hat jemand eine Idee!
Ich verwende Peppermint 6. Dabei hab ich versucht, mich auf der Seite
https://wiki.ubuntuusers.de/Scanner/
schlau zu machen.
lsusb zeigt den Scanner folgendermaßen an:
a1@a1 ~ $ lsusb
......
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 007: ID 03f0:0701 Hewlett-Packard ScanJet 5300c/5370c
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
und die "/lib/udev/rules.d/40-libsane.rules" hab ich bereits editiert vorgefunden:
# Hewlett-Packard ScanJet 2100C
ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="0505", ENV{libsane_matched}="yes"
# Hewlett-Packard ScanJet 6300C | Hewlett-Packard ScanJet 6350C | Hewlett-Packard ScanJet 6390C
ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="0601", ENV{libsane_matched}="yes"
# Hewlett-Packard ScanJet 2200C
ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="0605", ENV{libsane_matched}="yes"
# Hewlett-Packard ScanJet 5300C | Hewlett-Packard ScanJet 5370C
ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="0701", ENV{libsane_matched}="yes"
# Hewlett-Packard scanjet 4400c
ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="0705", ENV{libsane_matched}="yes"
# Hewlett-Packard ScanJet 7400c | Hewlett-Packard ScanJet 7450c | Hewlett-Packard ScanJet 7490c
ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="0801", ENV{libsane_matched}="yes"
Aber weder xsane 0.998 (Keine Geräte erreichbar) noch simple scan können den Scanner erkennen!!
Also auf die Liste der von SANE unterstützten Scanner 🇬🇧. Jetzt kommen die Sprachprobleme!!
ScanJet 5370ScanJet 5370C USB 0x03f0/0x0701 Good 1 pass, 2400 dpi - some FW revisions have x-axis image scaling problems over 1200 dpi avision (Build: 296) sane-avision
Nächstes Ziel:
http://exactcode.com/opensource/saneavision/
Avision-backend shipped with SANE – also ab zum Download von SANE Backend
https://alioth.debian.org/frs/?group_id=30186 >>> sane-backends-1.0.25.tar.gz
Entpacken mit: tar xvf sane-backends-1.0.25.tar.gz
Ins neu erzeugte Verzeichnis wechseln: cd sane-backends
sudo ./configure --prefix=/usr --sysconfdir=/etc
sudo make clean
sudo make
sudo make install
sudo make clean
War wohl alles für die Katz. Denn er weiß nicht was er tut!!! Vielleicht hab ich auch gleich noch Schaden verursacht.
Immer noch die gleiche Meldung von xsane 0.998 = Keine Geräte erreichbar.
Terminal:
$ sudo sane-find-scanner
[sudo] password for a1:
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x03f0 [Hewlett Packard], product=0x0701 [Hewlett Packard ScanJet 5300C/5370C ]) at libusb:003:003
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
$ scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
FSTAB:
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda8 during installation
UUID=35154afa-897a-49b2-9a57-f383f5fbff64 / ext3 errors=remount-ro 0 1
# swap was on /dev/sda7 during installation
UUID=70fe5a0b-367c-4e14-8a67-9bed82255f01 none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
All das verstehe ich nicht, bzw. finde ich keine Fehler, noch wüsste ich deren Abhilfe! Ob da jemand HELFEN kann???