Bitte benutze Codeblöcke statt angehängter Textdateien.
Damit das nicht jeder neu runterladen muss, habe ich mal einen erstellt:
root@Microknoppix:/home/knoppix# smartctl -t short /dev/sda
smartctl 6.2 2013-04-20 r3812 [i686-linux-3.9.6] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Short self-test routine immediately in off-line mode".
Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 2 minutes for test to complete.
Test will complete after Wed Oct 19 20:17:33 2016
Use smartctl -X to abort test.
root@Microknoppix:/home/knoppix# smartctl -l selftest /dev/sda
smartctl 6.2 2013-04-20 r3812 [i686-linux-3.9.6] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 00% 11186 400821
root@Microknoppix:/home/knoppix# smartctl --all /dev/sda
smartctl 6.2 2013-04-20 r3812 [i686-linux-3.9.6] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MK..61GSYN
Device Model: TOSHIBA MK5061GSYN
Serial Number: Y18HT00ST
LU WWN Device Id: 5 000039 3a1802b5f
Firmware Version: MH000K
User Capacity: 500.107.862.016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed Oct 19 20:25:09 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 112) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 123) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 082 074 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 2269
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3312
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 073 073 000 Old_age Always - 11186
10 Spin_Retry_Count 0x0033 166 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3312
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 9
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 20
193 Load_Cycle_Count 0x0032 088 088 000 Old_age Always - 127564
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 46 (Min/Max 7/58)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 464
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 1
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 134
222 Loaded_Hours 0x0032 080 080 000 Old_age Always - 8376
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 364
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 35162 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 35162 occurred at disk power-on lifetime: 11185 hours (466 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 03 8d 7f 47 e0 Error: UNC 3 sectors at LBA = 0x00477f8d = 4685709
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 10 80 7f 47 e0 00 00:00:45.775 READ DMA
c8 00 10 80 7f 47 e0 00 00:00:42.684 READ DMA
c8 00 10 80 7f 47 e0 00 00:00:39.592 READ DMA
c8 00 10 80 7f 47 e0 00 00:00:36.506 READ DMA
c8 00 01 80 7f 47 e0 00 00:00:36.501 READ DMA
Error 35161 occurred at disk power-on lifetime: 11185 hours (466 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 03 8d 7f 47 e0 Error: UNC 3 sectors at LBA = 0x00477f8d = 4685709
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 10 80 7f 47 e0 00 00:00:42.684 READ DMA
c8 00 10 80 7f 47 e0 00 00:00:39.592 READ DMA
c8 00 10 80 7f 47 e0 00 00:00:36.506 READ DMA
c8 00 01 80 7f 47 e0 00 00:00:36.501 READ DMA
c8 00 10 80 7f 47 e0 00 00:00:33.409 READ DMA
Error 35160 occurred at disk power-on lifetime: 11185 hours (466 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 03 8d 7f 47 e0 Error: UNC 3 sectors at LBA = 0x00477f8d = 4685709
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 10 80 7f 47 e0 00 00:00:39.592 READ DMA
c8 00 10 80 7f 47 e0 00 00:00:36.506 READ DMA
c8 00 01 80 7f 47 e0 00 00:00:36.501 READ DMA
c8 00 10 80 7f 47 e0 00 00:00:33.409 READ DMA
c8 00 10 80 7f 47 e0 00 00:00:30.318 READ DMA
Error 35159 occurred at disk power-on lifetime: 11185 hours (466 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 03 8d 7f 47 e0 Error: UNC 3 sectors at LBA = 0x00477f8d = 4685709
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 10 80 7f 47 e0 00 00:00:36.506 READ DMA
c8 00 01 80 7f 47 e0 00 00:00:36.501 READ DMA
c8 00 10 80 7f 47 e0 00 00:00:33.409 READ DMA
c8 00 10 80 7f 47 e0 00 00:00:30.318 READ DMA
c8 00 10 80 7f 47 e0 00 00:00:27.212 READ DMA
Error 35158 occurred at disk power-on lifetime: 11185 hours (466 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 03 8d 7f 47 e0 Error: UNC 3 sectors at LBA = 0x00477f8d = 4685709
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 10 80 7f 47 e0 00 00:00:33.409 READ DMA
c8 00 10 80 7f 47 e0 00 00:00:30.318 READ DMA
c8 00 10 80 7f 47 e0 00 00:00:27.212 READ DMA
c8 00 02 b6 f7 a1 e0 00 00:00:27.199 READ DMA
c8 00 10 30 b0 42 e0 00 00:00:27.199 READ DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 00% 11186 400821
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.