Hey,
ein Hauppauge_WinTV-HVR-930C wird nicht eingebunden. Kann mir jemand helfen?
nach dieser Anleitung habe ich versucht den Stick zu installieren: <https://linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-930C> /lib/firmware: dvb-fe-xc5000-1.6.114.fw ist vorhanden HVR-9x0_5_10_325_28153_SIGNED.zip entpackt und installiert. jedoch gab es am Ende Error-Meldungen
... insmod: ERROR: could not insert module ./ov5642.ko: Unknown symbol in module /sbin/insmod ./saa7134-alsa.ko insmod: ERROR: could not insert module ./saa7134-alsa.ko: Unknown symbol in module /sbin/insmod ./dst_ca.ko insmod: ERROR: could not insert module ./dst_ca.ko: Unknown symbol in module make[1]: Verzeichnis „/home/t530/Downloads/hvr/media_build/v4l“ wird verlassen t530@t530:~/Downloads/hvr/media_build$
als "Viewer" habe ich Kaffein installiert. Bei Kanalsuche > Quelle wird hier nichts angezeigt, die Option bleibt eingegrau. Auch beim Verbinden mit dem Laptop keine Reaktion.
hier zum Systemzustand:
lsusb Bus 002 Device 004: ID 045e:0039 Microsoft Corp. IntelliMouse Optical Bus 002 Device 003: ID 17ef:100a Lenovo ThinkPad Mini Dock Plus Series 3 Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 005: ID 04f2:b2ea Chicony Electronics Co., Ltd Integrated Camera [ThinkPad] Bus 001 Device 004: ID 0a5c:21e6 Broadcom Corp. BCM20702 Bluetooth 4.0 [ThinkPad] Bus 001 Device 003: ID 147e:2020 Upek TouchChip Fingerprint Coprocessor (WBF advanced mode) Bus 001 Device 006: ID 2040:1605 Hauppauge Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 004: ID 0bdb:1926 Ericsson Business Mobile Networks BV Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
und
dmesg ... [ 313.656590] cdc_mbim 3-4:1.6 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-4, CDC MBIM, 9a:d0:26:e2:8e:47 [ 313.657342] cdc_wdm 3-4:1.8: cdc-wdm2: USB WDM device [ 313.657603] cdc_acm 3-4:1.9: ttyACM2: USB ACM device [ 313.675113] cdc_mbim 3-4:1.6 wwp0s20u4i6: renamed from wwan0 [ 313.748385] cdc_wdm 3-4:1.8: wdm_int_callback - 0 bytes [ 313.748394] cdc_wdm 3-4:1.5: wdm_int_callback - 0 bytes [ 316.613915] wlp3s0: authenticate with 34:81:c4:23:1f:cd [ 316.616985] wlp3s0: send auth to 34:81:c4:23:1f:cd (try 1/3) [ 316.720009] wlp3s0: authenticated [ 316.722639] wlp3s0: associate with 34:81:c4:23:1f:cd (try 1/3) [ 316.746635] wlp3s0: RX AssocResp from 34:81:c4:23:1f:cd (capab=0x411 status=0 aid=1) [ 316.766405] wlp3s0: associated [ 316.766462] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 316.770085] cfg80211: Regulatory domain changed to country: DE [ 316.770089] cfg80211: DFS Master region: ETSI [ 316.770090] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 316.770093] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 316.770096] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 316.770098] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 316.770100] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [ 316.770102] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 316.819791] wlp3s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 34:81:c4:23:1f:cd [ 317.806580] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95) [ 317.807426] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95) [ 317.807792] nouveau 0000:01:00.0: DRM: suspending console... [ 317.807798] nouveau 0000:01:00.0: DRM: suspending display... [ 317.807809] nouveau 0000:01:00.0: DRM: evicting buffers... [ 317.807812] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle... [ 317.807855] nouveau 0000:01:00.0: DRM: suspending client object trees... [ 317.808068] nouveau 0000:01:00.0: DRM: suspending kernel object tree... [ 318.339125] thinkpad_acpi: EC reports that Thermal Table has changed [ 761.014027] usb 3-2: USB disconnect, device number 3 [ 761.014158] em2884 #0: Disconnecting em2884 #0 [ 761.014162] em2884 #0: Closing video extension [ 761.014166] em2884 #0: V4L2 device video1 deregistered [ 761.014412] em2884 #0: Closing audio extension [ 761.019642] em2884 #0: Closing DVB extension [ 761.020227] xc5000 22-0061: destroying instance [ 761.020269] em2884 #0: Closing input extension [ 761.059850] em2884 #0: Freeing device [ 764.986884] usb 3-1: new high-speed USB device number 5 using xhci_hcd [ 765.116638] usb 3-1: New USB device found, idVendor=2040, idProduct=1605 [ 765.116645] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [ 765.116649] usb 3-1: Product: WinTV HVR-930C [ 765.116652] usb 3-1: SerialNumber: 4034208935 [ 765.117281] em28xx: New device WinTV HVR-930C @ 480 Mbps (2040:1605, interface 0, class 0) [ 765.117286] em28xx: Audio interface 0 found (Vendor Class) [ 765.117289] em28xx: Video interface 0 found: isoc [ 765.117291] em28xx: DVB interface 0 found: isoc [ 765.117375] em28xx: chip ID is em2884 [ 765.177974] em2884 #0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x73f00daa [ 765.177979] em2884 #0: EEPROM info: [ 765.177981] em2884 #0: microcode start address = 0x0004, boot configuration = 0x01 [ 765.184985] em2884 #0: I2S audio, 5 sample rates [ 765.184992] em2884 #0: 500mA max power [ 765.184995] em2884 #0: Table at offset 0x24, strings=0x1e82, 0x186a, 0x0000 [ 765.185297] em2884 #0: Identified as Hauppauge WinTV HVR 930C (card=81) [ 765.187823] tveeprom 22-0050: Hauppauge model 16009, rev B1F0, serial# 4034208935 [ 765.187830] tveeprom 22-0050: MAC address is 00:0d:fe:75:24:a7 [ 765.187833] tveeprom 22-0050: tuner model is Xceive XC5000 (idx 150, type 76) [ 765.187836] tveeprom 22-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4) [ 765.187838] tveeprom 22-0050: audio processor is AVF4910B (idx 45) [ 765.187841] tveeprom 22-0050: decoder processor is AVF4910B (idx 44) [ 765.187843] tveeprom 22-0050: has no radio, has IR receiver, has no IR transmitter [ 765.187846] em2884 #0: analog set to isoc mode. [ 765.187848] em2884 #0: dvb set to isoc mode. [ 765.188015] em2884 #0: Registering V4L2 extension [ 765.188103] em2884 #0: Config register raw data: 0x5c [ 765.188367] em2884 #0: AC97 vendor ID = 0x6e256e25 [ 765.188508] em2884 #0: AC97 features = 0x6e25 [ 765.188512] em2884 #0: Unknown AC97 audio processor detected! [ 765.300773] em2884 #0: V4L2 video device registered as video1 [ 765.300779] em2884 #0: V4L2 extension successfully initialized [ 765.300782] em2884 #0: Binding audio extension [ 765.300784] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [ 765.300785] em28xx-audio.c: Copyright (C) 2007-2014 Mauro Carvalho Chehab [ 765.300840] em2884 #0: Endpoint 0x83 high-speed on intf 0 alt 7 interval = 8, size 196 [ 765.300842] em2884 #0: Number of URBs: 1, with 64 packets and 192 size [ 765.301013] em2884 #0: Audio extension successfully initialized [ 765.301015] em2884 #0: Binding DVB extension [ 766.546694] drxk: status = 0x439130d9 [ 766.546702] drxk: detected a drx-3913k, spin A2, xtal 20.250 MHz [ 767.812487] drxk: DRXK driver version 0.9.4300 [ 767.822200] drxk: frontend initialized. [ 767.822216] xc5000 22-0061: creating new instance [ 767.822523] xc5000: Successfully identified at address 0x61 [ 767.822525] xc5000: Firmware has not been loaded previously [ 767.822529] DVB: registering new adapter (em2884 #0) [ 767.822536] usb 3-1: DVB: registering adapter 0 frontend 0 (DRXK DVB-C DVB-T)... [ 767.823183] em2884 #0: DVB extension successfully initialized [ 767.823192] em2884 #0: Registering input extension [ 767.823344] Registered IR keymap rc-hauppauge [ 767.823584] input: em28xx IR (em2884 #0) as /devices/pci0000:00/0000:00:14.0/usb3/3-1/rc/rc0/input17 [ 767.823701] rc0: em28xx IR (em2884 #0) as /devices/pci0000:00/0000:00:14.0/usb3/3-1/rc/rc0 [ 767.824780] em2884 #0: Input extension successfully initalized [ 788.565902] usb 3-1: USB disconnect, device number 5 [ 788.566034] em2884 #0: Disconnecting em2884 #0 [ 788.566038] em2884 #0: Closing video extension [ 788.566043] em2884 #0: V4L2 device video1 deregistered [ 788.566257] em2884 #0: Closing audio extension [ 788.584470] em2884 #0: Closing DVB extension [ 788.585100] xc5000 22-0061: destroying instance [ 788.585112] em2884 #0: Closing input extension [ 788.633720] em2884 #0: Freeing device [ 846.181482] usb 1-1.2: new high-speed USB device number 6 using ehci-pci [ 846.275832] usb 1-1.2: New USB device found, idVendor=2040, idProduct=1605 [ 846.275840] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [ 846.275844] usb 1-1.2: Product: WinTV HVR-930C [ 846.275846] usb 1-1.2: SerialNumber: 4034208935 [ 846.276558] em28xx: New device WinTV HVR-930C @ 480 Mbps (2040:1605, interface 0, class 0) [ 846.276563] em28xx: Audio interface 0 found (Vendor Class) [ 846.276566] em28xx: Video interface 0 found: isoc [ 846.276568] em28xx: DVB interface 0 found: isoc [ 846.276798] em28xx: chip ID is em2884 [ 846.338678] em2884 #0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x73f00daa [ 846.338684] em2884 #0: EEPROM info: [ 846.338686] em2884 #0: microcode start address = 0x0004, boot configuration = 0x01 [ 846.347829] em2884 #0: I2S audio, 5 sample rates [ 846.347836] em2884 #0: 500mA max power [ 846.347839] em2884 #0: Table at offset 0x24, strings=0x1e82, 0x186a, 0x0000 [ 846.348161] em2884 #0: Identified as Hauppauge WinTV HVR 930C (card=81) [ 846.350628] tveeprom 22-0050: Hauppauge model 16009, rev B1F0, serial# 4034208935 [ 846.350634] tveeprom 22-0050: MAC address is 00:0d:fe:75:24:a7 [ 846.350637] tveeprom 22-0050: tuner model is Xceive XC5000 (idx 150, type 76) [ 846.350641] tveeprom 22-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4) [ 846.350643] tveeprom 22-0050: audio processor is AVF4910B (idx 45) [ 846.350645] tveeprom 22-0050: decoder processor is AVF4910B (idx 44) [ 846.350648] tveeprom 22-0050: has no radio, has IR receiver, has no IR transmitter [ 846.350651] em2884 #0: analog set to isoc mode. [ 846.350653] em2884 #0: dvb set to isoc mode. [ 846.350817] em2884 #0: Registering V4L2 extension [ 846.351056] em2884 #0: Config register raw data: 0x4c [ 846.359148] em2884 #0: V4L2 video device registered as video1 [ 846.359156] em2884 #0: V4L2 extension successfully initialized [ 846.359160] em2884 #0: Binding DVB extension [ 847.615929] drxk: status = 0x439130d9 [ 847.615936] drxk: detected a drx-3913k, spin A2, xtal 20.250 MHz [ 849.088601] drxk: DRXK driver version 0.9.4300 [ 849.108061] drxk: frontend initialized. [ 849.108091] xc5000 22-0061: creating new instance [ 849.108803] xc5000: Successfully identified at address 0x61 [ 849.108820] xc5000: Firmware has not been loaded previously [ 849.108824] DVB: registering new adapter (em2884 #0) [ 849.108830] usb 1-1.2: DVB: registering adapter 0 frontend 0 (DRXK DVB-C DVB-T)... [ 849.110697] em2884 #0: DVB extension successfully initialized [ 849.110719] em2884 #0: Registering input extension [ 849.111163] Registered IR keymap rc-hauppauge [ 849.111341] input: em28xx IR (em2884 #0) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/rc/rc0/input18 [ 849.111551] rc0: em28xx IR (em2884 #0) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/rc/rc0 [ 849.115288] em2884 #0: Input extension successfully initalized
Da ich nicht gern Nicht-funktionierendes auf einem System habe: kann man falls nicht nötig HVR-9x0_5_10_325_28153_SIGNED.zip komplett oder in Teilen wieder entfernen? gruß, mux