Hallo zusammen....
Ich habe leider wieder Pronbleme mit der Mellanox Karte.... und zwar mag sie nimmer... der grund ist mir aktuell unklar. Ich habe zylklisch die Paktches für den Server nachinstalliert, via webmin, und nach dem reboot war auf ens8 alles tot... systemctl status networking.service - sagt:
gerd@4x4monster:~/mlnx-en-3.3-1.0.0.0/mft-4.5.0-31-x86_64-deb$ '''systemctl status networking.service''' ● networking.service - Raise network interfaces Loaded: loaded (/lib/systemd/system/networking.service; enabled; vendor preset: enabled) Drop-In: /run/systemd/generator/networking.service.d └─50-insserv.conf-$network.conf Active: failed (Result: exit-code) since Don 2016-12-01 21:05:52 CET; 8min ago Docs: man:interfaces(5) Process: 8155 ExecStart=/sbin/ifup -a --read-environment (code=exited, status=1/FAILURE) Process: 8149 ExecStartPre=/bin/sh -c [ "$CONFIGURE_INTERFACES" != "no" ] && [ -n "$(ifquery --read-environment --list --exclude Main PID: 8155 (code=exited, status=1/FAILURE) Dez 01 21:05:52 4x4monster ifup[8155]: than a configuration issue please read the section on submitting Dez 01 21:05:52 4x4monster ifup[8155]: bugs on either our web page at www.isc.org or in the README file Dez 01 21:05:52 4x4monster ifup[8155]: before submitting a bug. These pages explain the proper Dez 01 21:05:52 4x4monster ifup[8155]: process and the information we find helpful for debugging.. Dez 01 21:05:52 4x4monster ifup[8155]: exiting. Dez 01 21:05:52 4x4monster ifup[8155]: Failed to bring up ens8. Dez 01 21:05:52 4x4monster systemd[1]: networking.service: Main process exited, code=exited, status=1/FAILURE Dez 01 21:05:52 4x4monster systemd[1]: Failed to start Raise network interfaces. Dez 01 21:05:52 4x4monster systemd[1]: networking.service: Unit entered failed state. Dez 01 21:05:52 4x4monster systemd[1]: networking.service: Failed with result 'exit-code'.
lspci sagt
00:00.0 Host bridge: Intel Corporation 7300 Chipset Memory Controller Hub (rev 01) 00:01.0 PCI bridge: Intel Corporation 7300 Chipset PCI Express Port 1 (rev 01) 00:02.0 PCI bridge: Intel Corporation 7300 Chipset PCI Express Port 2 (rev 01) 00:03.0 PCI bridge: Intel Corporation 7300 Chipset PCI Express Port 3 (rev 01) 00:04.0 PCI bridge: Intel Corporation 7300 Chipset PCI Express Port 4 (rev 01) 00:05.0 PCI bridge: Intel Corporation 7300 Chipset PCI Express Port 5 (rev 01) 00:06.0 PCI bridge: Intel Corporation 7300 Chipset PCI Express Port 6 (rev 01) 00:07.0 PCI bridge: Intel Corporation 7300 Chipset PCI Express Port 7 (rev 01) 00:10.0 Host bridge: Intel Corporation 7300 Chipset FSB Registers (rev 01) 00:10.1 Host bridge: Intel Corporation 7300 Chipset FSB Registers (rev 01) 00:10.2 Host bridge: Intel Corporation 7300 Chipset FSB Registers (rev 01) 00:10.3 Host bridge: Intel Corporation 7300 Chipset FSB Registers (rev 01) 00:11.0 Host bridge: Intel Corporation 7300 Chipset Snoop Filter Registers (rev 01) 00:11.3 Host bridge: Intel Corporation 7300 Chipset Snoop Filter Registers (rev 01) 00:13.0 Host bridge: Intel Corporation 7300 Chipset Debug and Miscellaneous Registers (rev 01) 00:15.0 Host bridge: Intel Corporation 7300 Chipset FBD Branch 0 Registers (rev 01) 00:16.0 Host bridge: Intel Corporation 7300 Chipset FBD Branch 1 Registers (rev 01) 00:1c.0 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 (rev 09) 00:1d.0 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 (rev 09) 00:1d.1 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 (rev 09) 00:1d.2 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 (rev 09) 00:1d.3 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #4 (rev 09) 00:1d.7 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller (rev 09) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d9) 00:1f.0 ISA bridge: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller (rev 09) 00:1f.1 IDE interface: Intel Corporation 631xESB/632xESB IDE Controller (rev 09) 01:04.0 System peripheral: Compaq Computer Corporation Integrated Lights Out Controller (rev 03) 01:04.2 System peripheral: Compaq Computer Corporation Integrated Lights Out Processor (rev 03) 01:04.4 USB controller: Hewlett-Packard Company Integrated Lights-Out Standard Virtual USB Controller 01:04.6 IPMI SMIC interface: Hewlett-Packard Company Integrated Lights-Out Standard KCS Interface 02:00.0 RAID bus controller: Hewlett-Packard Company Smart Array Controller (rev 04) 03:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port (rev 01) 03:00.3 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge (rev 01) 04:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 (rev 01) 04:01.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E2 (rev 01) 04:02.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E3 (rev 01) 05:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev c3) 06:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12) 07:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev c3) 08:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12) 0b:00.0 PCI bridge: PLX Technology, Inc. PEX 8533 32-lane, 6-port PCI Express Switch (rev aa) 0c:00.0 PCI bridge: PLX Technology, Inc. PEX 8533 32-lane, 6-port PCI Express Switch (rev aa) 0c:01.0 PCI bridge: PLX Technology, Inc. PEX 8533 32-lane, 6-port PCI Express Switch (rev aa) 0c:09.0 PCI bridge: PLX Technology, Inc. PEX 8533 32-lane, 6-port PCI Express Switch (rev aa) 0d:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 610] (rev a1) 0d:00.1 Audio device: NVIDIA Corporation GF119 HDMI Audio Controller (rev a1) 13:00.0 RAID bus controller: Adaptec Series 7 6G SAS/PCIe 3 (rev 01) 17:00.0 PCI bridge: PLX Technology, Inc. PEX 8533 32-lane, 6-port PCI Express Switch (rev aa) 18:01.0 PCI bridge: PLX Technology, Inc. PEX 8533 32-lane, 6-port PCI Express Switch (rev aa) 18:02.0 PCI bridge: PLX Technology, Inc. PEX 8533 32-lane, 6-port PCI Express Switch (rev aa) 18:08.0 PCI bridge: PLX Technology, Inc. PEX 8533 32-lane, 6-port PCI Express Switch (rev aa) 18:09.0 PCI bridge: PLX Technology, Inc. PEX 8533 32-lane, 6-port PCI Express Switch (rev aa) 18:0a.0 PCI bridge: PLX Technology, Inc. PEX 8533 32-lane, 6-port PCI Express Switch (rev aa) 1c:00.0 Ethernet controller: Mellanox Technologies MT26448 [ConnectX EN 10GigE, PCIe 2.0 5GT/s] (rev b0)
ifconfig sagt
enp6s0 Link encap:Ethernet Hardware Adresse 00:1e:0b:cf:f5:de inet Adresse:192.168.1.151 Bcast:192.168.1.255 Maske:255.255.255.0 inet6-Adresse: fe80::21e:bff:fecf:f5de/64 Gültigkeitsbereich:Verbindung UP BROADCAST RUNNING MULTICAST MTU:1500 Metrik:1 RX-Pakete:4009 Fehler:0 Verloren:4 Überläufe:0 Fenster:0 TX-Pakete:641 Fehler:0 Verloren:0 Überläufe:0 Träger:0 Kollisionen:0 Sendewarteschlangenlänge:1000 RX-Bytes:432356 (432.3 KB) TX-Bytes:108106 (108.1 KB) enp8s0 Link encap:Ethernet Hardware Adresse 00:1e:0b:cf:f5:e0 inet Adresse:192.168.1.151 Bcast:192.168.1.255 Maske:255.255.255.0 inet6-Adresse: fe80::21e:bff:fecf:f5e0/64 Gültigkeitsbereich:Verbindung UP BROADCAST RUNNING MULTICAST MTU:1500 Metrik:1 RX-Pakete:26721893 Fehler:0 Verloren:18 Überläufe:0 Fenster:0 TX-Pakete:4438563 Fehler:0 Verloren:0 Überläufe:0 Träger:0 Kollisionen:0 Sendewarteschlangenlänge:1000 RX-Bytes:40540010681 (40.5 GB) TX-Bytes:357016974 (357.0 MB) lo Link encap:Lokale Schleife inet Adresse:127.0.0.1 Maske:255.0.0.0 inet6-Adresse: ::1/128 Gültigkeitsbereich:Maschine UP LOOPBACK RUNNING MTU:65536 Metrik:1 RX-Pakete:27100 Fehler:0 Verloren:0 Überläufe:0 Fenster:0 TX-Pakete:27100 Fehler:0 Verloren:0 Überläufe:0 Träger:0 Kollisionen:0 Sendewarteschlangenlänge:1 RX-Bytes:9961441 (9.9 MB) TX-Bytes:9961441 (9.9 MB)
ip link sagt
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: enp6s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 00:1e:0b:cf:f5:de brd ff:ff:ff:ff:ff:ff 3: enp8s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 00:1e:0b:cf:f5:e0 brd ff:ff:ff:ff:ff:ff
Wie man sieht wird ens8 komplett ausgelassen... als wäre sie nicht da. iss sie aber.. unverändert. /etc/network/interfaces sagt
# This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). source /etc/network/interfaces.d/* # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto enp8s0 iface enp8s0 inet dhcp # Zweite interne Karte auto enp6s0 iface enp6s0 inet dhcp # dritte, 10gbit, Karte auto ens8 iface ens8 inet dhcp
Jetzt kann ich mir vorstellen, da nach dem install der letzten Treiber und dem nachfolgenden reboot die Karte nimmer mag das es daran liegt. Aber welche Pakete dies waren weiss ich leider nicht mehr. Wie zurück rollen ist mir auch unklar. Aber selbst wenn, was dann, dieses Paket dann auf immer und ewig auslassen... ne kann es auch nicht sein. Da muss doch ein Grund sein. Hardware Seitig hat sich soweit nix geänder. Auch am Switch vermute ich nix da die andere Karte am Backupserver sauber läuft.
Ich habe jetzt die beiden Kuper NICs wieder aktiv um dies sauber vom Büro aus machen zu können und nicht von handy abschreibend im Keller.