Hallo Hans9876543210, klar kann ich. Vielleicht ist ja Taomon sogar schon dankbar für neue Anregungen.
inxi -Fz liefert: (der Befehl war noch gar nicht installiert gewesen)
System: Host: ich-P662X Kernel: 4.4.0-53-generic x86_64 (64 bit)
Desktop: N/A Distro: Ubuntu 16.04 xenial
Machine: System: Medion product: P662X
Mobo: N/A model: H36QM
Bios: American Megatrends v: 201 date: 03/25/2010
CPU: Dual core Intel Core i5 M 430 (-HT-MCP-) cache: 3072 KB
clock speeds: max: 2267 MHz 1: 1333 MHz 2: 1866 MHz 3: 1333 MHz
4: 1466 MHz
Graphics: Card-1: Intel Core Processor Integrated Graphics Controller
Card-2: Advanced Micro Devices [AMD/ATI] RV730/M96 [Mobility Radeon HD 4650/5165]
Display Server: X.org 1.18.4 drivers: ati,radeon,intel (unloaded: fbdev,vesa)
tty size: 80x24 Advanced Data: N/A for root
Audio: Card-1 Intel 5 Series/3400 Series High Definition Audio
driver: snd_hda_intel
Card-2 Advanced Micro Devices [AMD/ATI] RV710/730 HDMI Audio [Radeon HD 4000 series]
driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k4.4.0-53-generic
Network: Card-1: Realtek RTL8191SEvB Wireless LAN Controller
driver: rtl8192se
IF: wlp3s0 state: down mac: <filter>
Card-2: Qualcomm Atheros AR8131 Gigabit Ethernet driver: atl1c
IF: enp6s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 500.1GB (2.6% used)
ID-1: /dev/sda model: WDC_WD5000BEVT size: 500.1GB
Partition: ID-1: / size: 455G used: 8.4G (2%) fs: ext4 dev: /dev/sda1
ID-2: swap-1 size: 4.08GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 50.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 232 Uptime: 9 min Memory: 1273.6/3750.4MB
Client: Shell (bash) inxi: 2.2.35
sudo journalctl -a | grep -iE liefert:
Aufruf: grep [OPTION]… MUSTER [DATEI]…
„grep --help“ liefert weitere Informationen.
sudo smartctl -t short /dev/sda liefert:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-53-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Short self-test routine immediately in off-line mode".
Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 2 minutes for test to complete.
Test will complete after Wed Dec 7 11:48:37 2016
Use smartctl -X to abort test.
Bei sleep 3m bleibt der Eingabecousor ohne Promtanzeige hängen, weil "3m" nicht bekannt
sudo smartctl -a /dev/sda liefert:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-53-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Scorpio Blue Serial ATA
Device Model: WDC WD5000BEVT-00A0RT0
Serial Number: WD-WX31A10A6254
LU WWN Device Id: 5 0014ee 0acb01147
Firmware Version: 01.01A01
User Capacity: 500.107.862.016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Wed Dec 7 11:57:13 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (12780) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 149) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7037) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 186 177 021 Pre-fail Always - 1691
4 Start_Stop_Count 0x0032 094 094 000 Old_age Always - 6339
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 4752
10 Spin_Retry_Count 0x0032 100 100 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 094 094 000 Old_age Always - 6325
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 256
193 Load_Cycle_Count 0x0032 194 194 000 Old_age Always - 20611
194 Temperature_Celsius 0x0022 116 105 000 Old_age Always - 31
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 051 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 4752 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.