anbei ein Screenshot
Nach Aktualisierung keine Anmeldung möglich
(Themenstarter)
Anmeldungsdatum: Beiträge: 96 Wohnort: Höchst im Odelwald |
|
Anmeldungsdatum: Beiträge: 2700 Wohnort: Germany - BW |
Holzhammer sudo dpkg --force-all -r python-samba und danach mal schauen, was sudo apt-get -f install macht. |
Anmeldungsdatum: Beiträge: 12067 |
Hallo! Ich werfe nur kurz was ein und lasse euch dann weitermachen ☺
Das kannst du über einen Live-Stick/CD oder auch von der bestehenden Installation aus ausführen. Einfacher wird vermutlich ersteres. |
Anmeldungsdatum: Beiträge: 8020 Wohnort: Süsel / Ostholstein |
Moin Moin, mit Screenshots kann ich nicht umgehen, ich bin hier raus. Gruß |
(Themenstarter)
Anmeldungsdatum: Beiträge: 96 Wohnort: Höchst im Odelwald |
es sieht gut aus. silge@silge-EG686AA-ABD-t3181-de:~$ sudo dpkg --force-all -r python-samba [sudo] password for silge: dpkg: python-samba: Abhängigkeitsprobleme, wird aber wie gefordert dennoch entfernt: samba-common-bin hängt ab von python-samba. (Lese Datenbank ... 169193 Dateien und Verzeichnisse sind derzeit installiert.) Entfernen von python-samba (2:4.3.9+dfsg-0ubuntu0.14.04.3) ... silge@silge-EG686AA-ABD-t3181-de:~$ sudo apt-get -f install Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Abhängigkeiten werden korrigiert ... Fertig Die folgenden zusätzlichen Pakete werden installiert: python-samba Die folgenden NEUEN Pakete werden installiert: python-samba 0 aktualisiert, 1 neu installiert, 0 zu entfernen und 72 nicht aktualisiert. Es müssen 1.067 kB an Archiven heruntergeladen werden. Nach dieser Operation werden 7.783 kB Plattenplatz zusätzlich benutzt. Möchten Sie fortfahren? [J/n] j Holen: 1 http://archive.ubuntu.com/ubuntu/ trusty-updates/main python-samba amd64 2:4.3.11+dfsg-0ubuntu0.14.04.3 [1.067 kB] Es wurden 1.067 kB in 1 s geholt (673 kB/s). Vormals nicht ausgewähltes Paket python-samba wird gewählt. (Lese Datenbank ... 168998 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../python-samba_2%3a4.3.11+dfsg-0ubuntu0.14.04.3_amd64.deb ... Entpacken von python-samba (2:4.3.11+dfsg-0ubuntu0.14.04.3) ... python-samba (2:4.3.11+dfsg-0ubuntu0.14.04.3) wird eingerichtet ... silge@silge-EG686AA-ABD-t3181-de:~$ |
Anmeldungsdatum: Beiträge: 2700 Wohnort: Germany - BW |
und jetzt machst du das was ChickenLipsRfun2eat vorgeschlagen hat, anfangen mit Festplattenstatus, ich tippe auch auf kaputte Sektoren. |
(Themenstarter)
Anmeldungsdatum: Beiträge: 96 Wohnort: Höchst im Odelwald |
silge@silge-EG686AA-ABD-t3181-de:~$ sudo update-smart-drivedb [sudo] password for silge: /var/lib/smartmontools/drivedb/drivedb.h.error: rejected by /usr/sbin/smartctl, probably no longer compatible silge@silge-EG686AA-ABD-t3181-de:~$ sudo smartctl -a /dev/sda smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.4.0-31-generic] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.12 Device Model: ST3160318AS Serial Number: 9VY35ZX1 LU WWN Device Id: 5 000c50 019cb3fd1 Firmware Version: CC44 User Capacity: 160.041.885.696 bytes [160 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu Dec 8 22:02:19 2016 CET ==> WARNING: A firmware update for this drive may be available, see the following Seagate web pages: http://knowledge.seagate.com/articles/en_US/FAQ/207931en http://knowledge.seagate.com/articles/en_US/FAQ/213891en SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 617) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 36) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 120 099 006 Pre-fail Always - 242745170 3 Spin_Up_Time 0x0003 098 097 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 969 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 077 060 030 Pre-fail Always - 57898717 9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 4551 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 979 183 Runtime_Bad_Block 0x0000 100 100 000 Old_age Offline - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 099 001 000 Old_age Always - 2675805454967 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 070 061 045 Old_age Always - 30 (Min/Max 19/31) 194 Temperature_Celsius 0x0022 030 040 000 Old_age Always - 30 (0 16 0 0 0) 195 Hardware_ECC_Recovered 0x001a 054 050 000 Old_age Always - 242745170 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 26306674695024 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 3812353391 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1832219807 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 4262 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. silge@silge-EG686AA-ABD-t3181-de:~$ sudo smartctl -H /dev/sda #Status der ersten SATA Platte smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.4.0-31-generic] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED silge@silge-EG686AA-ABD-t3181-de:~$ sudo smartctl -t long /dev/sda #Status der ersten SATA Platte ermitteln smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.4.0-31-generic] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Sending command: "Execute SMART Extended self-test routine immediately in off-line mode". Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful. Testing has begun. Please wait 36 minutes for test to complete. Test will complete after Thu Dec 8 22:40:01 2016 Use smartctl -X to abort test. silge@silge-EG686AA-ABD-t3181-de:~$ sudo smartctl -a /dev/sda #Status der ersten SATA Platte anzeigen [sudo] password for silge: smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.4.0-31-generic] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.12 Device Model: ST3160318AS Serial Number: 9VY35ZX1 LU WWN Device Id: 5 000c50 019cb3fd1 Firmware Version: CC44 User Capacity: 160.041.885.696 bytes [160 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu Dec 8 22:43:11 2016 CET ==> WARNING: A firmware update for this drive may be available, see the following Seagate web pages: http://knowledge.seagate.com/articles/en_US/FAQ/207931en http://knowledge.seagate.com/articles/en_US/FAQ/213891en SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 617) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 36) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 120 099 006 Pre-fail Always - 242818605 3 Spin_Up_Time 0x0003 098 097 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 969 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 077 060 030 Pre-fail Always - 57901183 9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 4552 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 979 183 Runtime_Bad_Block 0x0000 100 100 000 Old_age Offline - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 099 001 000 Old_age Always - 2675805454967 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 069 061 045 Old_age Always - 31 (Min/Max 19/33) 194 Temperature_Celsius 0x0022 031 040 000 Old_age Always - 31 (0 16 0 0 0) 195 Hardware_ECC_Recovered 0x001a 053 050 000 Old_age Always - 242818605 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 142996641160048 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 3812397223 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1832230062 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 4552 - # 2 Short offline Completed without error 00% 4262 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. silge@silge-EG686AA-ABD-t3181-de:~$ |
Anmeldungsdatum: Beiträge: 2700 Wohnort: Germany - BW |
Offenbar doch nicht fehlerhaft. Wobei mich bei SMART solche "raw" Werte immer irritieren ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 120 099 006 Pre-fail Always - 242818605 Na dann weiterhin viel Spaß mit der Hardware. |
Anmeldungsdatum: Beiträge: 12067 |
So ganz in Ordnung ist die Platte auch nicht: 7 Seek_Error_Rate 0x000f 077 060 030 Pre-fail Always - 57898717 deutet auf sehr viele Lesefehler hin. Könnte an einem defekten Dateisystem liegen, oder sie hat mal nen Schlag abbekommen. Erklärung geklaut von Self-Monitoring,_Analysis_and_Reporting_Technology:
Lege eine Datei in den Partitionen an: sudo touch /forcefsck Das zwingt das System beim nächsten Neustart die Platten zu überprüfen. Vorher lesen: fsck. |
(Themenstarter)
Anmeldungsdatum: Beiträge: 96 Wohnort: Höchst im Odelwald |
der Rechner läuft, die Paketverwaltung ist in Ordnung und ich habe die 3d-effekte ausgeschalten. Das Tempo ist langsam aber war ja zu erwarten gewesen. Vielen Dank für die Hilfe an alle! 👍 |