Hallo,
ich nutze an einem Acer TravelMate B117 mit Ubuntu 16.04 den Huawei E173 Stick zum surfen. Die Pin ist deaktiviert und der Stick steckt am USB 2.0 Anschluss. USB ModeSwitch ist installiert und ich habe den Eintrag SetStorageDelay=5 manuell geändert um mit dem Stick ins Internet zu gehen (Link). Es funktioniert soweit auch alles prima nur, dass der Stick immer zunächst einmal ab- und wieder angesteckt werden muß um eine Internetverbindung herzustellen. Wenn der Stick beim Bootvorgang eingesteckt ist oder ich ihn danach anstecke wird kein Mobiles Breitband angezeigt, erste einmal abziehen und wieder anstecken hilft. Bei meinem zweiten Acer Laptop mit Ubuntu 14.10 ist es genauso. Hat vielleicht jemand eine Idee woran es liegen könnte und was ich machen kann damit der Stick immer sofort funktioniert?
lsusb zeigt vor dem Ab- und Anstecken folgendes:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 005: ID 8087:0a2a Intel Corp. Bus 001 Device 004: ID 04f2:b577 Chicony Electronics Co., Ltd Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 006: ID 12d1:1446 Huawei Technologies Co., Ltd. Broadband stick (modem on) Bus 001 Device 002: ID 17ef:6019 Lenovo Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
lsusb nach dem Ab- und Anstecken:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 005: ID 8087:0a2a Intel Corp. Bus 001 Device 004: ID 04f2:b577 Chicony Electronics Co., Ltd Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 008: ID 12d1:1436 Huawei Technologies Co., Ltd. Broadband stick Bus 001 Device 002: ID 17ef:6019 Lenovo Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
usb-devices vor dem Ab- und Anstecken:
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=12d1 ProdID=1446 Rev=00.00 S: Manufacturer=HUAWEI Technology S: Product=HUAWEI Mobile C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
usb-devices nach dem Ab- und Anstecken:
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=12d1 ProdID=1436 Rev=00.00 S: Manufacturer=HUAWEI Technology S: Product=HUAWEI Mobile C: #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=ff Driver=cdc_ether I: If#= 2 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage I: If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
USB-Modeswitch.conf zeigt folgendes:
# Configuration for the usb_modeswitch package, a mode switching tool for # USB devices providing multiple states or modes # # Evaluated by the wrapper script /usr/sbin/usb_modeswitch_dispatcher # # To enable an option, set it to "1", "yes" or "true" (case doesn't matter) # Everything else counts as "disable" # Disable automatic mode switching globally (e.g. to access the original # install storage) DisableSwitching=0 # Disable check for MBIM module presence and configuration globally (to aid # special embedded environments) DisableMBIMGlobal=0 # Enable logging (results in a extensive report file in /var/log, named # "usb_modeswitch_<interface-name>" and probably others EnableLogging=0 # Optional increase of "delay_use" for the usb-storage driver; there are hints # that a recent kernel default change to 1 sec. may lead to problems, particu- # larly with USB 3.0 ports. Set this to at least 3 (seconds) in that case. # Does nothing if the current system value is same or higher SetStorageDelay=5
VG DMark