Hallo,
ich habe für meinen Sohn einen gebrauchten Computer gekauft. Nachdem ich Kubuntu (16.04) installiert habe, habe ich SMART angeworfen.
sudo smartctl -t long /dev/sda #Status der ersten SATA Platte ermitteln
Lieferte folgende Werte...
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-51-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST250DM000-1BD141 Serial Number: 6VYDSQ2A LU WWN Device Id: 5 000c50 0610383df Firmware Version: HP73 User Capacity: 250.059.350.016 bytes [250 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue May 2 13:28:33 2017 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 592) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 38) minutes. SCT capabilities: (0x103b) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 105 099 006 Pre-fail Always - 7708696 3 Spin_Up_Time 0x0023 100 100 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2076 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x002f 081 060 030 Pre-fail Always - 137152604 9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 6003 10 Spin_Retry_Count 0x0033 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2077 180 Unknown_HDD_Attribute 0x002b 100 100 000 Pre-fail Always - 1541027360 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0 189 High_Fly_Writes 0x003a 065 065 000 Old_age Always - 35 190 Airflow_Temperature_Cel 0x0022 074 062 045 Old_age Always - 26 (Min/Max 24/28) 194 Temperature_Celsius 0x0022 026 040 000 Old_age Always - 26 (0 15 0 0 0) 195 Hardware_ECC_Recovered 0x003a 041 034 000 Old_age Always - 7708696 196 Reallocated_Event_Count 0x0032 100 100 036 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 6003 - # 2 Extended offline Interrupted (host reset) 80% 1 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Seek_Error_Rate hat einen hohen Wert. Ich weiß, aber nicht ob das etwas zu sagen hat.
Für mich sieht die Platte ok aus. Wie seht ihr das?
Vielen Dank im Voraus.
Alex