Hallo zusammen!
Ich möchte mein Speedport Netzwerklaufwerk automatisch beim Start einbinden. In der fstab hat _netdev leider keine Auswirkung.
Daher überlege ich beim Start direkt mount -a automatisch auszuführen.
Wie kann ich das bewerkstelligen ohne manuell eingreifen zu müssen (sudo) und ohne mount generell "sudo-frei" zu stellen? Sollte es noch einen anderen Weg geben, wäre ich auch dankbar. Mir geht es nur ums automatisierte mounten.
Lieben Dank für eure Hilfe!
Gruß Stephan
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 | stephan@stefu:~$ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda2 during installation UUID=89f6faec-aab8-44d9-ab72-46c7a878b01b / ext4 rw,defaults,noatime,discard,errors=remount-ro 0 1 # /boot/efi was on /dev/sda1 during installation UUID=A70C-8816 /boot/efi vfat rw,defaults,noatime,discard,umask=0077 0 1 # /home was on /dev/sda4 during installation UUID=d4edd096-d3b0-4096-b5cc-e8642ef96cff /home ext4 rw,defaults,noatime,discard 0 2 # swap was on /dev/sda3 during installation UUID=d5b1335c-1bca-416e-90fb-c2d3ba2ff7ad none swap defaults,noatime,discard 0 0 #Speedport Router //192.168.2.1/share /media/speedport cifs _netdev,passwd= 0 0 |