Installiere dir 17.10,danach fangen wir noch mal von vorne an.Einen anderen Vorschlag mit jetzt noch mal die Brother Sachen zu löschen usw. möchte ich nicht.
Brother DCP-135C druckt nicht !
Anmeldungsdatum: Beiträge: 19610 Wohnort: Schleswig-Holstein |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 554 Wohnort: Freising |
Was hältst Du davon, wenn ich 17.10 installiere und wir noch ein mal von vorne beginnen, bevor ich irgend etwas anderes installiere ? Nachtrag. hat sich überschnitten |
Anmeldungsdatum: Beiträge: 19610 Wohnort: Schleswig-Holstein |
Melde dich wenn du so weit bist ☺ |
(Themenstarter)
Anmeldungsdatum: Beiträge: 554 Wohnort: Freising |
HAllo Kellerkind, ich wäre soweit ... 😕 |
Anmeldungsdatum: Beiträge: 19610 Wohnort: Schleswig-Holstein |
Na dann auf ein neues.Zeige die gesamte Terminal Ausgabe. Arbeite von oben ab sudo adduser $USER scanner sudo adduser $USER lp sudo mkdir -p /var/spool/lpd sudo mkdir -p /usr/share/cups/model sudo mkdir -p /usr/lib/sane sudo apt-get update && sudo apt-get install cups csh sane-utils xsane lib32z1 lib32ncurses5 libusb-0.1-4 libcanberra-gtk-module mkdir -p ~/Brother-DCP-135C-17.10 cd ~/Brother-DCP-135C-17.10 wget http://download.brother.com/welcome/dlf006654/brother-udev-rule-type1-1.0.2-0.all.deb wget http://download.brother.com/welcome/dlf006893/linux-brprinter-installer-2.1.1-1.gz gunzip linux-brprinter-installer-*.*.*-*.gz sudo bash linux-brprinter-installer-2.1.1-1 DCP-135C sudo dpkg -i brother-udev-rule-type1-1.0.2-0.all.deb sudo ln /usr/lib64/sane/libsane-brother2* /usr/lib/sane sudo reboot Alles i.o nach Neustart? Nur falls nicht /usr/local/Brother/sane/brsaneconfig2 -d
export SANE_DEBUG_DLL=255 && scanimage -L Viel Glück 😉 |
(Themenstarter)
Anmeldungsdatum: Beiträge: 554 Wohnort: Freising |
...@Lenovo-G585:~$ sudo adduser $USER scanner [sudo] Passwort für ...: Füge Benutzer »...« der Gruppe »scanner« hinzu ... Benutzer ... wird zur Gruppe scanner hinzugefügt. Fertig. ...@Lenovo-G585:~$ sudo adduser $USER lp Füge Benutzer »...« der Gruppe »lp« hinzu ... Benutzer ... wird zur Gruppe lp hinzugefügt. Fertig. ...@Lenovo-G585:~$ sudo mkdir -p /var/spool/lpd ...@Lenovo-G585:~$ sudo mkdir -p /usr/share/cups/model ...@Lenovo-G585:~$ sudo mkdir -p /usr/lib/sane ...@Lenovo-G585:~$ sudo apt-get update && sudo apt-get install cups csh sane-utils xsane lib32z1 lib32ncurses5 libusb-0.1-4 libcanberra-gtk-module OK:1 http://ppa.launchpad.net/gencfsm/ppa/ubuntu artful InRelease OK:2 http://de.archive.ubuntu.com/ubuntu artful InRelease OK:3 http://archive.canonical.com/ubuntu artful InRelease Holen:4 http://security.ubuntu.com/ubuntu artful-security InRelease [78,6 kB] Holen:5 http://de.archive.ubuntu.com/ubuntu artful-updates InRelease [78,6 kB] OK:6 http://ppa.launchpad.net/otto-kesselgulasch/gimp-edge/ubuntu artful InRelease Holen:7 http://de.archive.ubuntu.com/ubuntu artful-backports InRelease [72,2 kB] 0% [1 InRelease gpgv 15,4 kB] Holen:8 http://security.ubuntu.com/ubuntu artful-security/main amd64 DEP-11 Metadata [204 B] Holen:9 http://security.ubuntu.com/ubuntu artful-security/universe Translation-en [11,0 kB] Holen:10 http://security.ubuntu.com/ubuntu artful-security/universe amd64 DEP-11 Metadata [10,2 kB] Holen:11 http://de.archive.ubuntu.com/ubuntu artful-updates/main i386 Packages [113 kB] Holen:12 http://de.archive.ubuntu.com/ubuntu artful-updates/main amd64 Packages [114 kB] Holen:13 http://de.archive.ubuntu.com/ubuntu artful-updates/main amd64 DEP-11 Metadata [56,6 kB] Holen:14 http://de.archive.ubuntu.com/ubuntu artful-updates/main DEP-11 64x64 Icons [35,1 kB] Holen:15 http://de.archive.ubuntu.com/ubuntu artful-updates/universe i386 Packages [37,2 kB] Holen:16 http://de.archive.ubuntu.com/ubuntu artful-updates/universe amd64 Packages [37,5 kB] Holen:17 http://de.archive.ubuntu.com/ubuntu artful-updates/universe amd64 DEP-11 Metadata [48,2 kB] Holen:18 http://de.archive.ubuntu.com/ubuntu artful-updates/universe DEP-11 64x64 Icons [48,4 kB] Holen:19 http://de.archive.ubuntu.com/ubuntu artful-backports/universe amd64 DEP-11 Metadata [4.684 B] Es wurden 745 kB in 3 s geholt (206 kB/s). Paketlisten werden gelesen... Fertig Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig cups ist schon die neueste Version (2.2.4-7ubuntu3). sane-utils ist schon die neueste Version (1.0.27-1~experimental2ubuntu2.1). Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt: linux-headers-4.13.0-16 linux-headers-4.13.0-16-generic linux-image-4.13.0-16-generic linux-image-extra-4.13.0-16-generic Verwenden Sie »sudo apt autoremove«, um sie zu entfernen. Die folgenden zusätzlichen Pakete werden Installiert lib32tinfo5 libc6-i386 libcanberra-gtk0 xsane-common Vorgeschlagene Pakete: gocr | cuneiform | tesseract-ocr | ocrad gv hylafax-client | mgetty-fax Die folgenden NEUEN Pakete werden installiert: csh lib32ncurses5 lib32tinfo5 lib32z1 libc6-i386 libcanberra-gtk-module libcanberra-gtk0 libusb-0.1-4 xsane xsane-common 0 aktualisiert, 10 neu installiert, 0 zu entfernen und 10 nicht aktualisiert. Es müssen 4.809 kB an Archiven heruntergeladen werden. Nach dieser Operation werden 19,3 MB Plattenplatz zusätzlich benutzt. Möchten Sie fortfahren? [J/n] Abbruch. ...@Lenovo-G585:~$ sudo apt-get update && sudo apt-get install cups csh sane-utils xsane lib32z1 lib32ncurses5 libusb-0.1-4 libcanberra-gtk-module OK:1 http://security.ubuntu.com/ubuntu artful-security InRelease OK:2 http://de.archive.ubuntu.com/ubuntu artful InRelease OK:3 http://archive.canonical.com/ubuntu artful InRelease OK:4 http://ppa.launchpad.net/gencfsm/ppa/ubuntu artful InRelease OK:5 http://de.archive.ubuntu.com/ubuntu artful-updates InRelease OK:6 http://ppa.launchpad.net/otto-kesselgulasch/gimp-edge/ubuntu artful InRelease OK:7 http://de.archive.ubuntu.com/ubuntu artful-backports InRelease Paketlisten werden gelesen... Fertig Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig cups ist schon die neueste Version (2.2.4-7ubuntu3). sane-utils ist schon die neueste Version (1.0.27-1~experimental2ubuntu2.1). Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt: linux-headers-4.13.0-16 linux-headers-4.13.0-16-generic linux-image-4.13.0-16-generic linux-image-extra-4.13.0-16-generic Verwenden Sie »sudo apt autoremove«, um sie zu entfernen. Die folgenden zusätzlichen Pakete werden Installiert lib32tinfo5 libc6-i386 libcanberra-gtk0 xsane-common Vorgeschlagene Pakete: gocr | cuneiform | tesseract-ocr | ocrad gv hylafax-client | mgetty-fax Die folgenden NEUEN Pakete werden installiert: csh lib32ncurses5 lib32tinfo5 lib32z1 libc6-i386 libcanberra-gtk-module libcanberra-gtk0 libusb-0.1-4 xsane xsane-common 0 aktualisiert, 10 neu installiert, 0 zu entfernen und 10 nicht aktualisiert. Es müssen 4.809 kB an Archiven heruntergeladen werden. Nach dieser Operation werden 19,3 MB Plattenplatz zusätzlich benutzt. Möchten Sie fortfahren? [J/n] Abbruch. ...@Lenovo-G585:~$ cd ~/Brother-DCP-135C-17.10 bash: cd: /home/.../Brother-DCP-135C-17.10: Datei oder Verzeichnis nicht gefunden ...@Lenovo-G585:~$ |
(Themenstarter)
Anmeldungsdatum: Beiträge: 554 Wohnort: Freising |
Die weiteren Befehle erübrigen sich wohl ? |
Anmeldungsdatum: Beiträge: 295 |
Die von axt beschriebene Vorgehensweise führt nicht mehr zum Erfolg. Auch die Wiki-Einträge helfen nicht (mehr). Auch wenn es noch nicht geklappt hat so lese ich gespannt mit und warte sehnsüchtigst auf eine Lösung. Danke für die Arbeit! Grüße, marexel |
(Themenstarter)
Anmeldungsdatum: Beiträge: 554 Wohnort: Freising |
Hallo Kellerkind, nachdem ich den fehlenden Ordner von Hand erstellt habe, konnte ich die Befehle abarbeiten. Der Drucker funktioniert wieder ☺ Der Scanner nicht ☹ Nach wie vor die gleiche Problematik. |
(Themenstarter)
Anmeldungsdatum: Beiträge: 554 Wohnort: Freising |
/usr/local/Brother/sane/brsaneconfig2 -d ----------------------------- cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> /dev/mapper/ubuntu--budgie--vg-root / ext4 errors=remount-ro 0 1 #/dev/mapper/ubuntu--budgie--vg-swap_1 none swap sw 0 0 /dev/mapper/cryptswap1 none swap sw 0 0 ----------------------------- sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. could not open USB device 0x0bda/0x0129 at 002:002: Access denied (insufficient permissions) could not open USB device 0x1d6b/0x0002 at 002:001: Access denied (insufficient permissions) could not open USB device 0x1d6b/0x0001 at 004:001: Access denied (insufficient permissions) could not open USB device 0x5986/0x0295 at 001:003: Access denied (insufficient permissions) could not open USB device 0x1058/0x1021 at 001:005: Access denied (insufficient permissions) could not open USB device 0x1c4f/0x0034 at 001:013: Access denied (insufficient permissions) could not open USB device 0x0dc6/0x5000 at 001:006: Access denied (insufficient permissions) could not open USB device 0x0dc6/0x5000 at 001:004: Access denied (insufficient permissions) could not open USB device 0x05e3/0x0605 at 001:002: Access denied (insufficient permissions) could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions) could not open USB device 0x1d6b/0x0001 at 003:001: Access denied (insufficient permissions) could not open USB device 0x1d6b/0x0003 at 006:001: Access denied (insufficient permissions) found USB scanner (vendor=0x04f9, product=0x01ce) at libusb:005:003 could not open USB device 0x058f/0x6387 at 005:002: Access denied (insufficient permissions) could not open USB device 0x1d6b/0x0002 at 005:001: Access denied (insufficient permissions) # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. # You may want to run this program as root to find all devices. Once you # found the scanner devices, be sure to adjust access permissions as # necessary. ----------------------------- ls -R -all /proc/bus/usb ls: Zugriff auf '/proc/bus/usb' nicht möglich: Datei oder Verzeichnis nicht gefunden ----------------------------- cat /proc/bus/usb/devices cat: /proc/bus/usb/devices: Datei oder Verzeichnis nicht gefunden ----------------------------- scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). ----------------------------- ----------------------------- /usr/local/Brother/sane/brsanenetdevice2.cfg: ----------------------------- /usr/local/Brother/sane/Brsane2.ini: [Support Model] 0x0161,10,1,"MFC-210C" 0x0162,12,1,"MFC-420CN" 0x0163,10,1,"MFC-410CN" 0x0165,12,1,"MFC-620CN" 0x0166,10,1,"MFC-610CLN" 0x0168,10,1,"MFC-620CLN" 0x0169,10,2,"DCP-110C" 0x016b,10,2,"DCP-310CN" 0x016d,12,1,"MFC-5440CN" 0x016e,12,1,"MFC-5840CN" 0x0173,11,1,"MFC-3240C" 0x0174,11,1,"MFC-3340CN" 0x0180, 6,1,"MFC-7420" 0x0181, 6,1,"MFC-7820N" 0x0182, 7,2,"DCP-7010" 0x0183, 6,2,"DCP-7020" 0x0184, 6,2,"DCP-7025" 0x0185, 5,1,"MFC-7220" 0x0186, 5,1,"MFC-7225N" 0x018a, 16,1,"MFC-9420CN" 0x1a3, 8,2, "DCP-8060" 0x1a4,108,2, "DCP-8065DN" 0x1a5, 8,1, "MFC-8460N" 0x1a6,108,1, "MFC-8860DN" 0x1a7,108,1, "MFC-8870DW" 0x1bd, 8,1, "MFC-8660DN" 0x018c,10,2,"DCP-115C" 0x018d,10,2,"DCP-116C" 0x018e,10,2,"DCP-117C" 0x018f,10,2,"DCP-118C" 0x0190,12,2,"DCP-120C" 0x0191,10,2,"DCP-315CN" 0x0192,12,2,"DCP-340CW" 0x0193,10,1,"MFC-215C" 0x0194,12,1,"MFC-425CN" 0x0195,12,1,"MFC-820CW" 0x0196,12,1,"MFC-820CN" 0x0197,12,1,"MFC-640CW" 0x0198,10,1,"MFC-615CL" 0x0199,10,1,"MFC-830CLN" 0x019a,12,1,"MFC-840CLN" 0x01a8,10,2,"DCP-130C" 0x01a9,10,2,"DCP-330C" 0x01aa,12,2,"DCP-540CN" 0x01ab,12,1,"MFC-240C" 0x01ae,10,2,"DCP-750CW" 0x01af,12,1,"MFC-440CN" 0x01b0,12,1,"MFC-660CN" 0x01b1,12,1,"MFC-665CW" 0x01b2,12,1,"MFC-845CW" 0x01b4,12,1,"MFC-460CN" 0x01b5,10,1,"MFC-630CD" 0x01b6,10,1,"MFC-850CDN" 0x01b7,12,1,"MFC-5460CN" 0x01b8,12,1,"MFC-5860CN" 0x01ba,11,1,"MFC-3360C" 0x01be,10,2,"DCP-750CN" 0x01bf,12,1,"MFC-860CDN" [ModelTypeName] 1=MFC Scanner 2=DCP Scanner [Driver] scanfast24=0 NoUseCM=0 compression=1 Inqueue=32000 LogFile=0 ----------------------------- /usr/local/Brother/sane/models2/ext1.ini: [Support Model] 0x01c9, 16,2,"DCP-9040CN" 0x01ca, 16,1,"MFC-9440CN" 0x01cb, 116,2,"DCP-9045CDN" 0x01cc, 116,1,"MFC-9840CDW" 0x01ec, 116,1,"MFC-9640CW" 0x01e4, 10,2,"DCP-357C" 0x01e3, 10,2,"DCP-353C" 0x01e2, 10,2,"DCP-157C" 0x01e1, 10,2,"DCP-153C" 0x01e0, 12,1,"MFC-265C" 0x01df, 10,2,"DCP-155C" 0x01de, 12,1,"MFC-880CDN" 0x01dd, 10,1,"MFC-870CDN" 0x01dc, 10,1,"MFC-650CD" 0x01db, 12,1,"MFC-480CN" 0x01da, 12,1,"MFC-885CW" 0x01d9, 12,1,"MFC-685CW" 0x01d8, 12,1,"MFC-680CN" 0x01d7, 12,1,"MFC-465CN" 0x01d6, 12,1,"MFC-260C" 0x01d5, 10,1,"MFC-235C" 0x01d4, 10,1,"MFC-230C" 0x01d3, 10,2,"DCP-770CN" 0x01d2, 10,2,"DCP-770CW" 0x01d1, 12,2,"DCP-560CN" 0x01d0, 10,2,"DCP-350C" 0x01cf, 10,2,"DCP-150C" 0x01ce, 10,2,"DCP-135C" ----------------------------- /usr/local/Brother/sane/models2/ext2.ini: [Support Model] 0x020d ,16,1,"MFC-9450CDN" 0x020c ,16,2,"DCP-9042CDN" 0x20a ,108,1, "MFC-8670DN" ----------------------------- MODEL:"DCP-9040CN",ID:0x4f9:0x1c9,TYPE:16,2,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-9440CN",ID:0x4f9:0x1ca,TYPE:16,1,RE:0xffff,WE:0xffff CM:,, MODEL:"DCP-9045CDN",ID:0x4f9:0x1cb,TYPE:16,2,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-9840CDW",ID:0x4f9:0x1cc,TYPE:16,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-9640CW",ID:0x4f9:0x1ec,TYPE:16,1,RE:0xffff,WE:0xffff CM:,, MODEL:"DCP-357C",ID:0x4f9:0x1e4,TYPE:10,2,RE:0xffff,WE:0xffff CM:,, MODEL:"DCP-353C",ID:0x4f9:0x1e3,TYPE:10,2,RE:0xffff,WE:0xffff CM:,, MODEL:"DCP-157C",ID:0x4f9:0x1e2,TYPE:10,2,RE:0xffff,WE:0xffff CM:,, MODEL:"DCP-153C",ID:0x4f9:0x1e1,TYPE:10,2,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-265C",ID:0x4f9:0x1e0,TYPE:12,1,RE:0xffff,WE:0xffff CM:,, MODEL:"DCP-155C",ID:0x4f9:0x1df,TYPE:10,2,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-880CDN",ID:0x4f9:0x1de,TYPE:12,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-870CDN",ID:0x4f9:0x1dd,TYPE:10,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-650CD",ID:0x4f9:0x1dc,TYPE:10,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-480CN",ID:0x4f9:0x1db,TYPE:12,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-885CW",ID:0x4f9:0x1da,TYPE:12,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-685CW",ID:0x4f9:0x1d9,TYPE:12,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-680CN",ID:0x4f9:0x1d8,TYPE:12,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-465CN",ID:0x4f9:0x1d7,TYPE:12,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-260C",ID:0x4f9:0x1d6,TYPE:12,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-235C",ID:0x4f9:0x1d5,TYPE:10,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-230C",ID:0x4f9:0x1d4,TYPE:10,1,RE:0xffff,WE:0xffff CM:,, MODEL:"DCP-770CN",ID:0x4f9:0x1d3,TYPE:10,2,RE:0xffff,WE:0xffff CM:,, MODEL:"DCP-770CW",ID:0x4f9:0x1d2,TYPE:10,2,RE:0xffff,WE:0xffff CM:,, MODEL:"DCP-560CN",ID:0x4f9:0x1d1,TYPE:12,2,RE:0xffff,WE:0xffff CM:,, MODEL:"DCP-350C",ID:0x4f9:0x1d0,TYPE:10,2,RE:0xffff,WE:0xffff CM:,, MODEL:"DCP-150C",ID:0x4f9:0x1cf,TYPE:10,2,RE:0xffff,WE:0xffff CM:,, MODEL:"DCP-135C",ID:0x4f9:0x1ce,TYPE:10,2,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-9450CDN",ID:0x4f9:0x20d,TYPE:16,1,RE:0xffff,WE:0xffff CM:,, MODEL:"DCP-9042CDN",ID:0x4f9:0x20c,TYPE:16,2,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-8670DN",ID:0x4f9:0x20a,TYPE:8,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-210C",ID:0x4f9:0x161,TYPE:10,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-420CN",ID:0x4f9:0x162,TYPE:12,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-410CN",ID:0x4f9:0x163,TYPE:10,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-620CN",ID:0x4f9:0x165,TYPE:12,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-610CLN",ID:0x4f9:0x166,TYPE:10,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-620CLN",ID:0x4f9:0x168,TYPE:10,1,RE:0xffff,WE:0xffff CM:,, MODEL:"DCP-110C",ID:0x4f9:0x169,TYPE:10,2,RE:0xffff,WE:0xffff CM:,, MODEL:"DCP-310CN",ID:0x4f9:0x16b,TYPE:10,2,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-5440CN",ID:0x4f9:0x16d,TYPE:12,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-5840CN",ID:0x4f9:0x16e,TYPE:12,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-3240C",ID:0x4f9:0x173,TYPE:11,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-3340CN",ID:0x4f9:0x174,TYPE:11,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-7420",ID:0x4f9:0x180,TYPE:6,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-7820N",ID:0x4f9:0x181,TYPE:6,1,RE:0xffff,WE:0xffff CM:,, MODEL:"DCP-7010",ID:0x4f9:0x182,TYPE:7,2,RE:0xffff,WE:0xffff CM:,, MODEL:"DCP-7020",ID:0x4f9:0x183,TYPE:6,2,RE:0xffff,WE:0xffff CM:,, MODEL:"DCP-7025",ID:0x4f9:0x184,TYPE:6,2,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-7220",ID:0x4f9:0x185,TYPE:5,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-7225N",ID:0x4f9:0x186,TYPE:5,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-9420CN",ID:0x4f9:0x18a,TYPE:16,1,RE:0xffff,WE:0xffff CM:,, MODEL:"DCP-8060",ID:0x4f9:0x1a3,TYPE:8,2,RE:0xffff,WE:0xffff CM:,, MODEL:"DCP-8065DN",ID:0x4f9:0x1a4,TYPE:8,2,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-8460N",ID:0x4f9:0x1a5,TYPE:8,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-8860DN",ID:0x4f9:0x1a6,TYPE:8,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-8870DW",ID:0x4f9:0x1a7,TYPE:8,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-8660DN",ID:0x4f9:0x1bd,TYPE:8,1,RE:0xffff,WE:0xffff CM:,, MODEL:"DCP-115C",ID:0x4f9:0x18c,TYPE:10,2,RE:0xffff,WE:0xffff CM:,, MODEL:"DCP-116C",ID:0x4f9:0x18d,TYPE:10,2,RE:0xffff,WE:0xffff CM:,, MODEL:"DCP-117C",ID:0x4f9:0x18e,TYPE:10,2,RE:0xffff,WE:0xffff CM:,, MODEL:"DCP-118C",ID:0x4f9:0x18f,TYPE:10,2,RE:0xffff,WE:0xffff CM:,, MODEL:"DCP-120C",ID:0x4f9:0x190,TYPE:12,2,RE:0xffff,WE:0xffff CM:,, MODEL:"DCP-315CN",ID:0x4f9:0x191,TYPE:10,2,RE:0xffff,WE:0xffff CM:,, MODEL:"DCP-340CW",ID:0x4f9:0x192,TYPE:12,2,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-215C",ID:0x4f9:0x193,TYPE:10,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-425CN",ID:0x4f9:0x194,TYPE:12,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-820CW",ID:0x4f9:0x195,TYPE:12,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-820CN",ID:0x4f9:0x196,TYPE:12,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-640CW",ID:0x4f9:0x197,TYPE:12,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-615CL",ID:0x4f9:0x198,TYPE:10,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-830CLN",ID:0x4f9:0x199,TYPE:10,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-840CLN",ID:0x4f9:0x19a,TYPE:12,1,RE:0xffff,WE:0xffff CM:,, MODEL:"DCP-130C",ID:0x4f9:0x1a8,TYPE:10,2,RE:0xffff,WE:0xffff CM:,, MODEL:"DCP-330C",ID:0x4f9:0x1a9,TYPE:10,2,RE:0xffff,WE:0xffff CM:,, MODEL:"DCP-540CN",ID:0x4f9:0x1aa,TYPE:12,2,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-240C",ID:0x4f9:0x1ab,TYPE:12,1,RE:0xffff,WE:0xffff CM:,, MODEL:"DCP-750CW",ID:0x4f9:0x1ae,TYPE:10,2,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-440CN",ID:0x4f9:0x1af,TYPE:12,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-660CN",ID:0x4f9:0x1b0,TYPE:12,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-665CW",ID:0x4f9:0x1b1,TYPE:12,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-845CW",ID:0x4f9:0x1b2,TYPE:12,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-460CN",ID:0x4f9:0x1b4,TYPE:12,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-630CD",ID:0x4f9:0x1b5,TYPE:10,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-850CDN",ID:0x4f9:0x1b6,TYPE:10,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-5460CN",ID:0x4f9:0x1b7,TYPE:12,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-5860CN",ID:0x4f9:0x1b8,TYPE:12,1,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-3360C",ID:0x4f9:0x1ba,TYPE:11,1,RE:0xffff,WE:0xffff CM:,, MODEL:"DCP-750CN",ID:0x4f9:0x1be,TYPE:10,2,RE:0xffff,WE:0xffff CM:,, MODEL:"MFC-860CDN",ID:0x4f9:0x1bf,TYPE:12,1,RE:0xffff,WE:0xffff CM:,, ----------------------------- 0 "DCP-9040CN" 1 "MFC-9440CN" 2 "DCP-9045CDN" 3 "MFC-9840CDW" 4 "MFC-9640CW" 5 "DCP-357C" 6 "DCP-353C" 7 "DCP-157C" 8 "DCP-153C" 9 "MFC-265C" 10 "DCP-155C" 11 "MFC-880CDN" 12 "MFC-870CDN" 13 "MFC-650CD" 14 "MFC-480CN" 15 "MFC-885CW" 16 "MFC-685CW" 17 "MFC-680CN" 18 "MFC-465CN" 19 "MFC-260C" 20 "MFC-235C" 21 "MFC-230C" 22 "DCP-770CN" 23 "DCP-770CW" 24 "DCP-560CN" 25 "DCP-350C" 26 "DCP-150C" 27 "DCP-135C" 28 "MFC-9450CDN" 29 "DCP-9042CDN" 30 "MFC-8670DN" 31 "MFC-210C" 32 "MFC-420CN" 33 "MFC-410CN" 34 "MFC-620CN" 35 "MFC-610CLN" 36 "MFC-620CLN" 37 "DCP-110C" 38 "DCP-310CN" 39 "MFC-5440CN" 40 "MFC-5840CN" 41 "MFC-3240C" 42 "MFC-3340CN" 43 "MFC-7420" 44 "MFC-7820N" 45 "DCP-7010" 46 "DCP-7020" 47 "DCP-7025" 48 "MFC-7220" 49 "MFC-7225N" 50 "MFC-9420CN" 51 "DCP-8060" 52 "DCP-8065DN" 53 "MFC-8460N" 54 "MFC-8860DN" 55 "MFC-8870DW" 56 "MFC-8660DN" 57 "DCP-115C" 58 "DCP-116C" 59 "DCP-117C" 60 "DCP-118C" 61 "DCP-120C" 62 "DCP-315CN" 63 "DCP-340CW" 64 "MFC-215C" 65 "MFC-425CN" 66 "MFC-820CW" 67 "MFC-820CN" 68 "MFC-640CW" 69 "MFC-615CL" 70 "MFC-830CLN" 71 "MFC-840CLN" 72 "DCP-130C" 73 "DCP-330C" 74 "DCP-540CN" 75 "MFC-240C" 76 "DCP-750CW" 77 "MFC-440CN" 78 "MFC-660CN" 79 "MFC-665CW" 80 "MFC-845CW" 81 "MFC-460CN" 82 "MFC-630CD" 83 "MFC-850CDN" 84 "MFC-5460CN" 85 "MFC-5860CN" 86 "MFC-3360C" 87 "DCP-750CN" 88 "MFC-860CDN" Devices on network ping |
(Themenstarter)
Anmeldungsdatum: Beiträge: 554 Wohnort: Freising |
export SANE_DEBUG_DLL=255 && scanimage -L [sanei_debug] Setting debug level of dll to 255. [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.27 [dll] sane_init/read_dlld: attempting to open directory `./dll.d' [dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d' [dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d' [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip [dll] sane_init/read_config: reading dll.d/hplip [dll] add_backend: adding backend `hpaio' [dll] sane_init/read_dlld: done. [dll] sane_init/read_config: reading dll.conf [dll] add_backend: adding backend `net' [dll] add_backend: adding backend `abaton' [dll] add_backend: adding backend `agfafocus' [dll] add_backend: adding backend `apple' [dll] add_backend: adding backend `avision' [dll] add_backend: adding backend `artec' [dll] add_backend: adding backend `artec_eplus48u' [dll] add_backend: adding backend `as6e' [dll] add_backend: adding backend `bh' [dll] add_backend: adding backend `canon' [dll] add_backend: adding backend `canon630u' [dll] add_backend: adding backend `canon_dr' [dll] add_backend: adding backend `cardscan' [dll] add_backend: adding backend `coolscan' [dll] add_backend: adding backend `coolscan3' [dll] add_backend: adding backend `dell1600n_net' [dll] add_backend: adding backend `dmc' [dll] add_backend: adding backend `epjitsu' [dll] add_backend: adding backend `epson2' [dll] add_backend: adding backend `epsonds' [dll] add_backend: adding backend `fujitsu' [dll] add_backend: adding backend `genesys' [dll] add_backend: adding backend `gt68xx' [dll] add_backend: adding backend `hp' [dll] add_backend: adding backend `hp3900' [dll] add_backend: adding backend `hpsj5s' [dll] add_backend: adding backend `hp3500' [dll] add_backend: adding backend `hp4200' [dll] add_backend: adding backend `hp5400' [dll] add_backend: adding backend `hp5590' [dll] add_backend: adding backend `hpljm1005' [dll] add_backend: adding backend `hs2p' [dll] add_backend: adding backend `ibm' [dll] add_backend: adding backend `kodak' [dll] add_backend: adding backend `kodakaio' [dll] add_backend: adding backend `kvs1025' [dll] add_backend: adding backend `kvs20xx' [dll] add_backend: adding backend `leo' [dll] add_backend: adding backend `lexmark' [dll] add_backend: adding backend `ma1509' [dll] add_backend: adding backend `magicolor' [dll] add_backend: adding backend `matsushita' [dll] add_backend: adding backend `microtek' [dll] add_backend: adding backend `microtek2' [dll] add_backend: adding backend `mustek' [dll] add_backend: adding backend `mustek_usb' [dll] add_backend: adding backend `mustek_usb2' [dll] add_backend: adding backend `nec' [dll] add_backend: adding backend `niash' [dll] add_backend: adding backend `pie' [dll] add_backend: adding backend `pint' [dll] add_backend: adding backend `pixma' [dll] add_backend: adding backend `plustek' [dll] add_backend: adding backend `qcam' [dll] add_backend: adding backend `ricoh' [dll] add_backend: adding backend `rts8891' [dll] add_backend: adding backend `s9036' [dll] add_backend: adding backend `sceptre' [dll] add_backend: adding backend `sharp' [dll] add_backend: adding backend `sm3600' [dll] add_backend: adding backend `sm3840' [dll] add_backend: adding backend `snapscan' [dll] add_backend: adding backend `sp15c' [dll] add_backend: adding backend `tamarack' [dll] add_backend: adding backend `teco1' [dll] add_backend: adding backend `teco2' [dll] add_backend: adding backend `teco3' [dll] add_backend: adding backend `u12' [dll] add_backend: adding backend `umax' [dll] add_backend: adding backend `umax1220u' [dll] add_backend: adding backend `v4l' [dll] add_backend: adding backend `xerox_mfp' [dll] add_backend: adding backend `brother2' [dll] sane_get_devices [dll] load: searching backend `brother2' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-brother2.so.1' [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-brother2.so.1' (No such file or directory) [dll] load: couldn't find backend `brother2' (No such file or directory) [dll] load: searching backend `xerox_mfp' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1' [dll] init: initializing backend `xerox_mfp' [dll] init: backend `xerox_mfp' is version 1.0.13 [dll] load: searching backend `v4l' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' (No such file or directory) [dll] load: couldn't find backend `v4l' (No such file or directory) [dll] load: searching backend `umax1220u' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1' [dll] init: initializing backend `umax1220u' [dll] init: backend `umax1220u' is version 1.0.2 [dll] load: searching backend `umax' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1' [dll] init: initializing backend `umax' [dll] init: backend `umax' is version 1.0.45 [dll] load: searching backend `u12' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1' [dll] init: initializing backend `u12' [dll] init: backend `u12' is version 1.0.0 [dll] load: searching backend `teco3' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1' [dll] init: initializing backend `teco3' [dll] init: backend `teco3' is version 1.0.1 [dll] load: searching backend `teco2' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1' [dll] init: initializing backend `teco2' [dll] init: backend `teco2' is version 1.0.10 [dll] load: searching backend `teco1' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1' [dll] init: initializing backend `teco1' [dll] init: backend `teco1' is version 1.0.10 [dll] load: searching backend `tamarack' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1' [dll] init: initializing backend `tamarack' [dll] init: backend `tamarack' is version 1.0.0 [dll] load: searching backend `sp15c' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1' [dll] init: initializing backend `sp15c' [dll] init: backend `sp15c' is version 1.0.0 [dll] load: searching backend `snapscan' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1' [dll] init: initializing backend `snapscan' [dll] init: backend `snapscan' is version 1.4.53 [dll] load: searching backend `sm3840' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1' [dll] init: initializing backend `sm3840' [dll] init: backend `sm3840' is version 1.0.0 [dll] load: searching backend `sm3600' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1' [dll] init: initializing backend `sm3600' [dll] init: backend `sm3600' is version 1.0.6 [dll] load: searching backend `sharp' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1' [dll] init: initializing backend `sharp' [dll] init: backend `sharp' is version 1.0.0 [dll] load: searching backend `sceptre' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1' [dll] init: initializing backend `sceptre' [dll] init: backend `sceptre' is version 1.0.10 [dll] load: searching backend `s9036' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1' [dll] init: initializing backend `s9036' [dll] init: backend `s9036' is version 1.0.0 [dll] load: searching backend `rts8891' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1' [dll] init: initializing backend `rts8891' [dll] init: backend `rts8891' is version 1.0.2401 [dll] load: searching backend `ricoh' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1' [dll] init: initializing backend `ricoh' [dll] init: backend `ricoh' is version 1.0.0 [dll] load: searching backend `qcam' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1' [dll] init: initializing backend `qcam' [dll] init: backend `qcam' is version 1.0.0 [dll] load: searching backend `plustek' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1' [dll] init: initializing backend `plustek' [dll] init: backend `plustek' is version 1.0.0 [dll] load: searching backend `pixma' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1' [dll] init: initializing backend `pixma' [dll] init: backend `pixma' is version 1.0.17 [dll] load: searching backend `pint' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' (No such file or directory) [dll] load: couldn't find backend `pint' (No such file or directory) [dll] load: searching backend `pie' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1' [dll] init: initializing backend `pie' [dll] init: backend `pie' is version 1.0.9 [dll] load: searching backend `niash' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1' [dll] init: initializing backend `niash' [dll] init: backend `niash' is version 1.0.1 [dll] load: searching backend `nec' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1' [dll] init: initializing backend `nec' [dll] init: backend `nec' is version 1.0.0 [dll] load: searching backend `mustek_usb2' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1' [dll] init: initializing backend `mustek_usb2' [dll] init: backend `mustek_usb2' is version 1.0.10 [dll] load: searching backend `mustek_usb' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1' [dll] init: initializing backend `mustek_usb' [dll] init: backend `mustek_usb' is version 1.0.18 [dll] load: searching backend `mustek' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1' [dll] init: initializing backend `mustek' [dll] init: backend `mustek' is version 1.0.138 [dll] load: searching backend `microtek2' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1' [dll] init: initializing backend `microtek2' [dll] init: backend `microtek2' is version 1.0.0 [dll] load: searching backend `microtek' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1' [dll] init: initializing backend `microtek' [dll] init: backend `microtek' is version 1.0.0 [dll] load: searching backend `matsushita' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1' [dll] init: initializing backend `matsushita' [dll] init: backend `matsushita' is version 1.0.7 [dll] load: searching backend `magicolor' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1' [dll] init: initializing backend `magicolor' [dll] init: backend `magicolor' is version 1.0.1 [dll] load: searching backend `ma1509' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1' [dll] init: initializing backend `ma1509' [dll] init: backend `ma1509' is version 1.0.3 [dll] load: searching backend `lexmark' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1' [dll] init: initializing backend `lexmark' [dll] init: backend `lexmark' is version 1.0.32 [dll] load: searching backend `leo' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1' [dll] init: initializing backend `leo' [dll] init: backend `leo' is version 1.0.11 [dll] load: searching backend `kvs20xx' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1' [dll] init: initializing backend `kvs20xx' [dll] init: backend `kvs20xx' is version 1.0.2 [dll] load: searching backend `kvs1025' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1' [dll] init: initializing backend `kvs1025' [dll] init: backend `kvs1025' is version 1.0.5 [dll] load: searching backend `kodakaio' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1' [dll] init: initializing backend `kodakaio' [dll] init: backend `kodakaio' is version 1.0.3 [dll] load: searching backend `kodak' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1' [dll] init: initializing backend `kodak' [dll] init: backend `kodak' is version 1.0.7 [dll] load: searching backend `ibm' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1' [dll] init: initializing backend `ibm' [dll] init: backend `ibm' is version 1.0.0 [dll] load: searching backend `hs2p' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1' [dll] init: initializing backend `hs2p' [dll] init: backend `hs2p' is version 1.0.0 [dll] load: searching backend `hpljm1005' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1' [dll] init: initializing backend `hpljm1005' [dll] init: backend `hpljm1005' is version 1.0.1 [dll] load: searching backend `hp5590' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1' [dll] init: initializing backend `hp5590' [dll] init: backend `hp5590' is version 1.0.7 [dll] load: searching backend `hp5400' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1' [dll] init: initializing backend `hp5400' [dll] init: backend `hp5400' is version 1.0.3 [dll] load: searching backend `hp4200' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1' [dll] init: initializing backend `hp4200' [dll] init: backend `hp4200' is version 1.0.0 [dll] load: searching backend `hp3500' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1' [dll] init: initializing backend `hp3500' [dll] init: backend `hp3500' is version 1.0.0 [dll] load: searching backend `hpsj5s' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1' [dll] init: initializing backend `hpsj5s' [dll] init: backend `hpsj5s' is version 1.0.3 [dll] load: searching backend `hp3900' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1' [dll] init: initializing backend `hp3900' [dll] init: backend `hp3900' is version 1.0.0 [dll] load: searching backend `hp' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1' [dll] init: initializing backend `hp' [dll] init: backend `hp' is version 1.0.8 [dll] load: searching backend `gt68xx' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1' [dll] init: initializing backend `gt68xx' [dll] init: backend `gt68xx' is version 1.0.84 [dll] load: searching backend `genesys' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1' [dll] init: initializing backend `genesys' [dll] init: backend `genesys' is version 1.0.2511 [dll] load: searching backend `fujitsu' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1' [dll] init: initializing backend `fujitsu' [dll] init: backend `fujitsu' is version 1.0.133 [dll] load: searching backend `epsonds' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1' [dll] init: initializing backend `epsonds' [dll] init: backend `epsonds' is version 1.0.0 [dll] load: searching backend `epson2' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1' [dll] init: initializing backend `epson2' [dll] init: backend `epson2' is version 1.0.124 [dll] load: searching backend `epjitsu' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1' [dll] init: initializing backend `epjitsu' [dll] init: backend `epjitsu' is version 1.0.31 [dll] load: searching backend `dmc' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1' [dll] init: initializing backend `dmc' [dll] init: backend `dmc' is version 1.0.0 [dll] load: searching backend `dell1600n_net' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1' [dll] init: initializing backend `dell1600n_net' [dll] init: backend `dell1600n_net' is version 1.0.0 [dll] load: searching backend `coolscan3' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1' [dll] init: initializing backend `coolscan3' [dll] init: backend `coolscan3' is version 1.0.0 [dll] load: searching backend `coolscan' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1' [dll] init: initializing backend `coolscan' [dll] init: backend `coolscan' is version 1.0.0 [dll] load: searching backend `cardscan' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1' [dll] init: initializing backend `cardscan' [dll] init: backend `cardscan' is version 1.0.3 [dll] load: searching backend `canon_dr' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1' [dll] init: initializing backend `canon_dr' [dll] init: backend `canon_dr' is version 1.0.56 [dll] load: searching backend `canon630u' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1' [dll] init: initializing backend `canon630u' [dll] init: backend `canon630u' is version 1.0.1 [dll] load: searching backend `canon' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1' [dll] init: initializing backend `canon' [dll] init: backend `canon' is version 1.0.0 [dll] load: searching backend `bh' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1' [dll] init: initializing backend `bh' [dll] init: backend `bh' is version 1.0.4 [dll] load: searching backend `as6e' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1' [dll] init: initializing backend `as6e' [dll] load: searching backend `artec_eplus48u' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1' [dll] init: initializing backend `artec_eplus48u' [dll] init: backend `artec_eplus48u' is version 1.0.0 [dll] load: searching backend `artec' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1' [dll] init: initializing backend `artec' [dll] init: backend `artec' is version 1.0.0 [dll] load: searching backend `avision' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1' [dll] init: initializing backend `avision' [dll] init: backend `avision' is version 1.0.297 [dll] load: searching backend `apple' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1' [dll] init: initializing backend `apple' [dll] init: backend `apple' is version 1.0.0 [dll] load: searching backend `agfafocus' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1' [dll] init: initializing backend `agfafocus' [dll] init: backend `agfafocus' is version 1.0.0 [dll] load: searching backend `abaton' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1' [dll] init: initializing backend `abaton' [dll] init: backend `abaton' is version 1.0.0 [dll] load: searching backend `net' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1' [dll] init: initializing backend `net' [dll] init: backend `net' is version 1.0.27 [dll] load: searching backend `hpaio' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1' [dll] init: initializing backend `hpaio' [dll] init: backend `hpaio' is version 1.0.0 [dll] sane_get_devices: found 0 devices No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). [dll] sane_exit: exiting [dll] sane_exit: calling backend `xerox_mfp's exit function [dll] sane_exit: calling backend `umax1220u's exit function [dll] sane_exit: calling backend `umax's exit function [dll] sane_exit: calling backend `u12's exit function [dll] sane_exit: calling backend `teco3's exit function [dll] sane_exit: calling backend `teco2's exit function [dll] sane_exit: calling backend `teco1's exit function [dll] sane_exit: calling backend `tamarack's exit function [dll] sane_exit: calling backend `sp15c's exit function [dll] sane_exit: calling backend `snapscan's exit function [dll] sane_exit: calling backend `sm3840's exit function [dll] sane_exit: calling backend `sm3600's exit function [dll] sane_exit: calling backend `sharp's exit function [dll] sane_exit: calling backend `sceptre's exit function [dll] sane_exit: calling backend `s9036's exit function [dll] sane_exit: calling backend `rts8891's exit function [dll] sane_exit: calling backend `ricoh's exit function [dll] sane_exit: calling backend `qcam's exit function [dll] sane_exit: calling backend `plustek's exit function [dll] sane_exit: calling backend `pixma's exit function [dll] sane_exit: calling backend `pie's exit function [dll] sane_exit: calling backend `niash's exit function [dll] sane_exit: calling backend `nec's exit function [dll] sane_exit: calling backend `mustek_usb2's exit function [dll] sane_exit: calling backend `mustek_usb's exit function [dll] sane_exit: calling backend `mustek's exit function [dll] sane_exit: calling backend `microtek2's exit function [dll] sane_exit: calling backend `microtek's exit function [dll] sane_exit: calling backend `matsushita's exit function [dll] sane_exit: calling backend `magicolor's exit function [dll] sane_exit: calling backend `ma1509's exit function [dll] sane_exit: calling backend `lexmark's exit function [dll] sane_exit: calling backend `leo's exit function [dll] sane_exit: calling backend `kvs20xx's exit function [dll] sane_exit: calling backend `kvs1025's exit function [dll] sane_exit: calling backend `kodakaio's exit function [dll] sane_exit: calling backend `kodak's exit function [dll] sane_exit: calling backend `ibm's exit function [dll] sane_exit: calling backend `hs2p's exit function [dll] sane_exit: calling backend `hpljm1005's exit function [dll] sane_exit: calling backend `hp5590's exit function [dll] sane_exit: calling backend `hp5400's exit function [dll] sane_exit: calling backend `hp4200's exit function [dll] sane_exit: calling backend `hp3500's exit function [dll] sane_exit: calling backend `hpsj5s's exit function [dll] sane_exit: calling backend `hp3900's exit function [dll] sane_exit: calling backend `hp's exit function [dll] sane_exit: calling backend `gt68xx's exit function [dll] sane_exit: calling backend `genesys's exit function [dll] sane_exit: calling backend `fujitsu's exit function [dll] sane_exit: calling backend `epsonds's exit function [dll] sane_exit: calling backend `epson2's exit function [dll] sane_exit: calling backend `epjitsu's exit function [dll] sane_exit: calling backend `dmc's exit function [dll] sane_exit: calling backend `dell1600n_net's exit function [dll] sane_exit: calling backend `coolscan3's exit function [dll] sane_exit: calling backend `coolscan's exit function [dll] sane_exit: calling backend `cardscan's exit function [dll] sane_exit: calling backend `canon_dr's exit function [dll] sane_exit: calling backend `canon630u's exit function [dll] sane_exit: calling backend `canon's exit function [dll] sane_exit: calling backend `bh's exit function [dll] sane_exit: calling backend `artec_eplus48u's exit function [dll] sane_exit: calling backend `artec's exit function [dll] sane_exit: calling backend `avision's exit function [dll] sane_exit: calling backend `apple's exit function [dll] sane_exit: calling backend `agfafocus's exit function [dll] sane_exit: calling backend `abaton's exit function [dll] sane_exit: calling backend `net's exit function [dll] sane_exit: calling backend `hpaio's exit function [dll] sane_exit: finished |
(Themenstarter)
Anmeldungsdatum: Beiträge: 554 Wohnort: Freising |
Aus alledem werde ich leider nicht schlau ... |
Anmeldungsdatum: Beiträge: 207 |
Das sehe ich allerdings etwas anders. Wenn nahitaji_msaada endlich mal die Schritte von axt oder Kellerkind_2009, wie von beiden (EXAKT beschrieben) ausführen würde, wäre er längst schon am Ziel! Gruß Bourness |
Anmeldungsdatum: Beiträge: 295 |
Hmm, warum das? Ich habe gestern alles wie hier und im Wiki beschrieben durchgemacht. Erst durch die Installation mit "system-config-printer" funktioniert der Drucker - der Scanner immer noch nicht. Die Schritte von Kellerkind_2009 habe ich hingegen noch nicht probiert und wollte erstmal auf Erfolg von nahitaji_msaada warten - ob ich dann allerdings auch ohne die nervigen 3cm Verlust drucken kann...? Grüße, marexel |
Anmeldungsdatum: Beiträge: 207 |
Hallo marexel, kann es sein, dass du von einer anderen Ubuntu-Version, als die hier besprochende Version, sprichst? Gruß Bourness PS: Dein Link "hier" führt leider ins Nirwana. 😉 |