dmesg -f user
[ 18.345407] init: cups main process (703) killed by HUP signal
[ 18.345420] init: cups main process ended, respawning
[ 18.403915] init: failsafe main process (780) killed by TERM signal
[ 19.581210] init: plymouth-upstart-bridge main process ended, respawning
[ 19.590514] init: plymouth-upstart-bridge main process (1376) terminated with status 1
[ 19.590532] init: plymouth-upstart-bridge main process ended, respawning
[ 20.542106] init: plymouth-stop pre-start process (1451) terminated with status 1
[ 20.870546] init: anacron main process (1187) killed by TERM signal
[ 3921.725222] init: anacron main process (9251) killed by TERM signal
[ 5078.894471] init: anacron main process (10936) killed by TERM signal
[ 5081.176813] init: anacron main process (11222) killed by TERM signal
dmesg -l debug
[ 0.000000] DMI: Hewlett-Packard HP 250 G4 Notebook PC/80C1, BIOS F.19 08/27/2015
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000000] 1 base 009CFFF000 mask 7FFFFFF000 uncachable
[ 0.000000] 2 base 009D000000 mask 7FFF000000 uncachable
[ 0.000000] 3 base 009E000000 mask 7FFE000000 uncachable
[ 0.000000] 4 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000000] 5 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 16GB, type WB
[ 0.000000] reg 1, base: 2572284KB, range: 4KB, type UC
[ 0.000000] reg 2, base: 2512MB, range: 16MB, type UC
[ 0.000000] reg 3, base: 2528MB, range: 32MB, type UC
[ 0.000000] reg 4, base: 2560MB, range: 512MB, type UC
[ 0.000000] reg 5, base: 3GB, range: 1GB, type UC
[ 0.000000] e820: update [mem 0x9cfff000-0xffffffff] usable ==> reserved
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fec000, 0x01fecfff] PGTABLE
[ 0.000000] BRK [0x01fed000, 0x01fedfff] PGTABLE
[ 0.000000] BRK [0x01fee000, 0x01feefff] PGTABLE
[ 0.000000] [mem 0x25ee00000-0x25effffff] page 2M
[ 0.000000] BRK [0x01fef000, 0x01feffff] PGTABLE
[ 0.000000] [mem 0x25c000000-0x25edfffff] page 2M
[ 0.000000] [mem 0x200000000-0x23fffffff] page 1G
[ 0.000000] [mem 0x240000000-0x25bffffff] page 2M
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x9bffffff] page 2M
[ 0.000000] [mem 0x9c000000-0x9c10dfff] page 4k
[ 0.000000] [mem 0x9cffe000-0x9cffefff] page 4k
[ 0.000000] BRK [0x01ff0000, 0x01ff0fff] PGTABLE
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880256600000-ffff88025e5fffff] on node 0
[ 0.000000] On node 0 totalpages: 2076844
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9925 pages used for memmap
[ 0.000000] DMA32 zone: 635151 pages, LIFO batch:31
[ 0.000000] Normal zone: 22464 pages used for memmap
[ 0.000000] Normal zone: 1437696 pages, LIFO batch:31
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] nr_irqs_gsi: 56
[ 0.000000] pcpu-alloc: s83968 r8192 d22528 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] hpet clockevent registered
[ 0.084186] TSC deadline timer enabled
[ 0.221123] \_SB_.PCI0:_OSC invalid UUID
[ 0.221124] _OSC request data:1 1f 0
[ 1.825231] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[ 1.825476] pci 0000:00:02.0: [8086:1606] type 00 class 0x030000
[ 1.825490] pci 0000:00:02.0: reg 0x10: [mem 0xc2000000-0xc2ffffff 64bit]
[ 1.825498] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 1.825503] pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f]
[ 1.825740] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[ 1.825749] pci 0000:00:03.0: reg 0x10: [mem 0xc5218000-0xc521bfff 64bit]
[ 1.825997] pci 0000:00:04.0: [8086:1603] type 00 class 0x118000
[ 1.826011] pci 0000:00:04.0: reg 0x10: [mem 0xc5210000-0xc5217fff 64bit]
[ 1.826274] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[ 1.826293] pci 0000:00:14.0: reg 0x10: [mem 0xc5200000-0xc520ffff 64bit]
[ 1.826353] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 1.826591] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[ 1.826610] pci 0000:00:16.0: reg 0x10: [mem 0xc5221000-0xc522101f 64bit]
[ 1.826673] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.826900] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[ 1.826919] pci 0000:00:1b.0: reg 0x10: [mem 0xc521c000-0xc521ffff 64bit]
[ 1.826979] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.827207] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
[ 1.827273] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.827497] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400
[ 1.827562] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.827788] pci 0000:00:1c.5: [8086:9c9a] type 01 class 0x060400
[ 1.827852] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.828083] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
[ 1.828357] pci 0000:00:1d.0: reg 0x10: [mem 0xc5225000-0xc52253ff]
[ 1.829920] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.830166] pci 0000:00:1f.0: [8086:9cc5] type 00 class 0x060100
[ 1.830495] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[ 1.830511] pci 0000:00:1f.2: reg 0x10: [io 0x6088-0x608f]
[ 1.830518] pci 0000:00:1f.2: reg 0x14: [io 0x6094-0x6097]
[ 1.830525] pci 0000:00:1f.2: reg 0x18: [io 0x6080-0x6087]
[ 1.830533] pci 0000:00:1f.2: reg 0x1c: [io 0x6090-0x6093]
[ 1.830540] pci 0000:00:1f.2: reg 0x20: [io 0x6060-0x607f]
[ 1.830547] pci 0000:00:1f.2: reg 0x24: [mem 0xc5224000-0xc52247ff]
[ 1.830586] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.830800] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[ 1.830815] pci 0000:00:1f.3: reg 0x10: [mem 0xc5220000-0xc52200ff 64bit]
[ 1.830835] pci 0000:00:1f.3: reg 0x20: [io 0x6040-0x605f]
[ 1.831070] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
[ 1.831101] pci 0000:00:1f.6: reg 0x10: [mem 0xc5223000-0xc5223fff 64bit]
[ 1.831470] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 1.831474] pci 0000:00:1c.0: bridge window [mem 0xc6000000-0xc6ffffff]
[ 1.831479] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
[ 1.831550] pci 0000:07:00.0: [10ec:8136] type 00 class 0x020000
[ 1.831567] pci 0000:07:00.0: reg 0x10: [io 0x4000-0x40ff]
[ 1.831597] pci 0000:07:00.0: reg 0x18: [mem 0xc5000000-0xc5000fff 64bit]
[ 1.831615] pci 0000:07:00.0: reg 0x20: [mem 0xc5100000-0xc5103fff 64bit pref]
[ 1.831692] pci 0000:07:00.0: supports D1 D2
[ 1.831694] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.836285] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 1.836288] pci 0000:00:1c.2: bridge window [mem 0xc4000000-0xc50fffff]
[ 1.836293] pci 0000:00:1c.2: bridge window [mem 0xc5100000-0xc51fffff 64bit pref]
[ 1.836370] pci 0000:0d:00.0: [14e4:4365] type 00 class 0x028000
[ 1.836394] pci 0000:0d:00.0: reg 0x10: [mem 0xc3000000-0xc3007fff 64bit]
[ 1.836521] pci 0000:0d:00.0: supports D1 D2
[ 1.836523] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
[ 1.848290] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff]
[ 1.848293] pci 0000:00:1c.5: bridge window [mem 0xc3000000-0xc3ffffff]
[ 1.848298] pci 0000:00:1c.5: bridge window [mem 0xc1000000-0xc1ffffff 64bit pref]
[ 1.857886] ACPI: \_SB_.PCI0: notify handler is installed
[ 1.857986] Found 1 acpi root devices
[ 1.858358] libata version 3.00 loaded.
[ 1.864596] PCI: pci_cache_line_size set to 64 bytes
[ 1.864640] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 1.864642] e820: reserve RAM buffer [mem 0x9c10e000-0x9fffffff]
[ 1.864644] e820: reserve RAM buffer [mem 0x9cfff000-0x9fffffff]
[ 1.864645] e820: reserve RAM buffer [mem 0x25f000000-0x25fffffff]
[ 1.871923] pnp 00:00: [dma 4]
[ 1.871948] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.871970] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.872075] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.872160] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.872211] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.872254] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.872297] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.872332] pnp 00:07: Plug and Play ACPI device, IDs SYN1efb SYN1e00 SYN0002 PNP0f13 (active)
[ 1.875228] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.875641] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.881959] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.881961] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.881963] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.881965] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xdfffffff]
[ 1.881967] pci_bus 0000:00: resource 8 [mem 0xfe000000-0xfe113fff]
[ 1.881969] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 1.881970] pci_bus 0000:01: resource 1 [mem 0xc6000000-0xc6ffffff]
[ 1.881972] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc0ffffff 64bit pref]
[ 1.881974] pci_bus 0000:07: resource 0 [io 0x4000-0x4fff]
[ 1.881976] pci_bus 0000:07: resource 1 [mem 0xc4000000-0xc50fffff]
[ 1.881977] pci_bus 0000:07: resource 2 [mem 0xc5100000-0xc51fffff 64bit pref]
[ 1.881979] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff]
[ 1.881981] pci_bus 0000:0d: resource 1 [mem 0xc3000000-0xc3ffffff]
[ 1.881983] pci_bus 0000:0d: resource 2 [mem 0xc1000000-0xc1ffffff 64bit pref]
[ 1.882755] pci 0000:00:02.0: Video device with shadowed ROM
[ 1.898932] PCI: CLS 64 bytes, default 64
[ 2.517172] intel_idle: does not run on family 6 model 61
[ 2.517963] Monitor-Mwait will be used to enter C-1 state
[ 2.517968] Monitor-Mwait will be used to enter C-2 state
[ 2.517971] Monitor-Mwait will be used to enter C-3 state
[ 2.517979] ACPI: acpi_idle registered with cpuidle
[ 2.561888] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.572071] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.572093] xhci_hcd 0000:00:14.0: irq 58 for MSI/MSI-X
[ 2.611298] PM: Hibernation image not present or could not be loaded.
[ 2.665351] r8169 0000:07:00.0: irq 59 for MSI/MSI-X
[ 2.665913] ahci 0000:00:1f.2: version 3.0
[ 2.666037] ahci 0000:00:1f.2: irq 60 for MSI/MSI-X
[ 2.686437] checking generic (b0000000 410000) vs hw (b0000000 10000000)
[ 2.750603] i915 0000:00:02.0: irq 61 for MSI/MSI-X
[ 3.024696] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.029887] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 17.297674] mei_me 0000:00:16.0: irq 62 for MSI/MSI-X
[ 17.494932] snd_hda_intel 0000:00:1b.0: irq 63 for MSI/MSI-X
[ 17.501510] snd_hda_intel 0000:00:03.0: irq 64 for MSI/MSI-X
[ 576.282389] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 3443.582887] PM: Preparing system for mem sleep
[ 3443.586361] PM: Entering mem sleep
[ 3444.512454] mei_me 0000:00:16.0: irq 62 for MSI/MSI-X
[ 3444.512554] snd_hda_intel 0000:00:03.0: irq 63 for MSI/MSI-X
[ 3444.512872] snd_hda_intel 0000:00:1b.0: irq 64 for MSI/MSI-X
[ 3445.328463] PM: Finishing wakeup.
[ 3446.693030] pci_bus 0000:01: Allocating resources
[ 3446.693059] pci_bus 0000:07: Allocating resources
[ 3446.693087] pci_bus 0000:0d: Allocating resources
[ 3446.694407] pci_bus 0000:01: Allocating resources
[ 3446.694433] pci_bus 0000:07: Allocating resources
[ 3446.694460] pci_bus 0000:0d: Allocating resources
[ 3447.102284] PM: Preparing system for mem sleep
[ 3447.105892] PM: Entering mem sleep
[ 3448.025314] snd_hda_intel 0000:00:03.0: irq 62 for MSI/MSI-X
[ 3448.027863] mei_me 0000:00:16.0: irq 63 for MSI/MSI-X
[ 3448.029099] snd_hda_intel 0000:00:1b.0: irq 64 for MSI/MSI-X
[ 3448.925147] PM: Finishing wakeup.
[ 3448.927321] pci_bus 0000:01: Allocating resources
[ 3448.927338] pci_bus 0000:07: Allocating resources
[ 3448.927354] pci_bus 0000:0d: Allocating resources
[ 3448.928003] pci_bus 0000:01: Allocating resources
[ 3448.928017] pci_bus 0000:07: Allocating resources
[ 3448.928032] pci_bus 0000:0d: Allocating resources
[ 3919.688629] PM: Preparing system for mem sleep
[ 3919.691794] PM: Entering mem sleep
[ 3920.616490] snd_hda_intel 0000:00:03.0: irq 62 for MSI/MSI-X
[ 3920.617580] xhci_hcd 0000:00:14.0: irq 58 for MSI/MSI-X
[ 3920.617635] mei_me 0000:00:16.0: irq 63 for MSI/MSI-X
[ 3920.617790] snd_hda_intel 0000:00:1b.0: irq 64 for MSI/MSI-X
[ 3921.512451] PM: Finishing wakeup.
[ 3921.785020] pci_bus 0000:01: Allocating resources
[ 3921.785042] pci_bus 0000:07: Allocating resources
[ 3921.785064] pci_bus 0000:0d: Allocating resources
[ 3921.786035] pci_bus 0000:01: Allocating resources
[ 3921.786056] pci_bus 0000:07: Allocating resources
[ 3921.786153] pci_bus 0000:0d: Allocating resources
[ 5079.218064] PM: Preparing system for mem sleep
[ 5079.221433] PM: Entering mem sleep
[ 5080.147537] snd_hda_intel 0000:00:03.0: irq 62 for MSI/MSI-X
[ 5080.148603] xhci_hcd 0000:00:14.0: irq 58 for MSI/MSI-X
[ 5080.148685] mei_me 0000:00:16.0: irq 63 for MSI/MSI-X
[ 5080.148871] snd_hda_intel 0000:00:1b.0: irq 64 for MSI/MSI-X
[ 5080.963452] PM: Finishing wakeup.
[ 5080.964658] pci_bus 0000:01: Allocating resources
[ 5080.964672] pci_bus 0000:07: Allocating resources
[ 5080.964688] pci_bus 0000:0d: Allocating resources
[ 5080.965163] pci_bus 0000:01: Allocating resources
[ 5080.965176] pci_bus 0000:07: Allocating resources
[ 5080.965190] pci_bus 0000:0d: Allocating resources
find ~ ! -user $USER -ls
3194940 4 drwxr-xr-x 3 root root 4096 Jul 15 2017 /home/zwergal/.arm
3194949 4 drwxr-xr-x 2 root root 4096 Jul 15 2017 /home/zwergal/.arm/cache
3158544 148 -rw-r--r-- 1 root root 141596 Jul 15 2017 /home/zwergal/.arm/cache/torConfigDesc.txt
3157493 8 -rw-r--r-- 1 root root 0 Feb 3 12:03 /home/zwergal/.aptitude/config
3152126 12 -rw-r--r-- 1 root root 41 Jul 11 2015 /home/zwergal/CadCam/FreeCad/libarea/install_manifest.txt
3157011 12 -rw------- 1 root root 1704 Jun 12 2016 /home/zwergal/.android/adbkey
3157015 12 -rw-r--r-- 1 root root 740 Jun 12 2016 /home/zwergal/.android/adbkey.pub
sudo smartctl --all /dev/sda
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-141-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SandForce Driven SSDs
Device Model: ADATA SSD S510 120GB
Serial Number: 03130020500500003122
LU WWN Device Id: 0 000000 000000000
Firmware Version: 5.0.5c
User Capacity: 120.034.123.776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Feb 4 19:38:20 2018 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0021) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 120 120 050 Pre-fail Always - 0/0
5 Retired_Block_Count 0x0033 100 100 003 Pre-fail Always - 4
9 Power_On_Hours_and_Msec 0x0032 093 093 000 Old_age Always - 6718h+02m+45.270s
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3585
171 Program_Fail_Count 0x0032 000 000 000 Old_age Always - 2
172 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0
174 Unexpect_Power_Loss_Ct 0x0030 000 000 000 Old_age Offline - 335
177 Wear_Range_Delta 0x0000 000 000 000 Old_age Offline - 2
181 Program_Fail_Count 0x0032 000 000 000 Old_age Always - 2
182 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 031 069 000 Old_age Always - 31 (Min/Max 1/69)
195 ECC_Uncorr_Error_Count 0x001c 100 100 000 Old_age Offline - 0/0
196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 4
201 Unc_Soft_Read_Err_Rate 0x001c 100 100 000 Old_age Offline - 0/0
204 Soft_ECC_Correct_Rate 0x001c 100 100 000 Old_age Offline - 0/0
230 Life_Curve_Status 0x0013 100 100 000 Pre-fail Always - 100
231 SSD_Life_Left 0x0013 097 097 010 Pre-fail Always - 0
233 SandForce_Internal 0x0000 000 000 000 Old_age Offline - 22048
234 SandForce_Internal 0x0032 000 000 000 Old_age Always - 7597
241 Lifetime_Writes_GiB 0x0032 000 000 000 Old_age Always - 7597
242 Lifetime_Reads_GiB 0x0032 000 000 000 Old_age Always - 10633
SMART Error Log not supported
SMART Self-test Log not supported
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
sudo smartctl --all /dev/sda1
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-141-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SandForce Driven SSDs
Device Model: ADATA SSD S510 120GB
Serial Number: 03130020500500003122
LU WWN Device Id: 0 000000 000000000
Firmware Version: 5.0.5c
User Capacity: 120.034.123.776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Feb 4 19:39:26 2018 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0021) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 120 120 050 Pre-fail Always - 0/0
5 Retired_Block_Count 0x0033 100 100 003 Pre-fail Always - 4
9 Power_On_Hours_and_Msec 0x0032 093 093 000 Old_age Always - 6718h+03m+50.480s
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3585
171 Program_Fail_Count 0x0032 000 000 000 Old_age Always - 2
172 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0
174 Unexpect_Power_Loss_Ct 0x0030 000 000 000 Old_age Offline - 335
177 Wear_Range_Delta 0x0000 000 000 000 Old_age Offline - 2
181 Program_Fail_Count 0x0032 000 000 000 Old_age Always - 2
182 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 031 069 000 Old_age Always - 31 (Min/Max 1/69)
195 ECC_Uncorr_Error_Count 0x001c 100 100 000 Old_age Offline - 0/0
196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 4
201 Unc_Soft_Read_Err_Rate 0x001c 100 100 000 Old_age Offline - 0/0
204 Soft_ECC_Correct_Rate 0x001c 100 100 000 Old_age Offline - 0/0
230 Life_Curve_Status 0x0013 100 100 000 Pre-fail Always - 100
231 SSD_Life_Left 0x0013 097 097 010 Pre-fail Always - 0
233 SandForce_Internal 0x0000 000 000 000 Old_age Offline - 22048
234 SandForce_Internal 0x0032 000 000 000 Old_age Always - 7597
241 Lifetime_Writes_GiB 0x0032 000 000 000 Old_age Always - 7597
242 Lifetime_Reads_GiB 0x0032 000 000 000 Old_age Always - 10633
SMART Error Log not supported
SMART Self-test Log not supported
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
sudo smartctl --all /dev/sda2
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-141-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SandForce Driven SSDs
Device Model: ADATA SSD S510 120GB
Serial Number: 03130020500500003122
LU WWN Device Id: 0 000000 000000000
Firmware Version: 5.0.5c
User Capacity: 120.034.123.776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Feb 4 19:40:30 2018 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0021) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 120 120 050 Pre-fail Always - 0/0
5 Retired_Block_Count 0x0033 100 100 003 Pre-fail Always - 4
9 Power_On_Hours_and_Msec 0x0032 093 093 000 Old_age Always - 6718h+04m+55.240s
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3585
171 Program_Fail_Count 0x0032 000 000 000 Old_age Always - 2
172 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0
174 Unexpect_Power_Loss_Ct 0x0030 000 000 000 Old_age Offline - 335
177 Wear_Range_Delta 0x0000 000 000 000 Old_age Offline - 2
181 Program_Fail_Count 0x0032 000 000 000 Old_age Always - 2
182 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 032 069 000 Old_age Always - 32 (Min/Max 1/69)
195 ECC_Uncorr_Error_Count 0x001c 100 100 000 Old_age Offline - 0/0
196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 4
201 Unc_Soft_Read_Err_Rate 0x001c 100 100 000 Old_age Offline - 0/0
204 Soft_ECC_Correct_Rate 0x001c 100 100 000 Old_age Offline - 0/0
230 Life_Curve_Status 0x0013 100 100 000 Pre-fail Always - 100
231 SSD_Life_Left 0x0013 097 097 010 Pre-fail Always - 0
233 SandForce_Internal 0x0000 000 000 000 Old_age Offline - 22048
234 SandForce_Internal 0x0032 000 000 000 Old_age Always - 7597
241 Lifetime_Writes_GiB 0x0032 000 000 000 Old_age Always - 7597
242 Lifetime_Reads_GiB 0x0032 000 000 000 Old_age Always - 10633
SMART Error Log not supported
SMART Self-test Log not supported
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
sudo smartctl --all /dev/sda5
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-141-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SandForce Driven SSDs
Device Model: ADATA SSD S510 120GB
Serial Number: 03130020500500003122
LU WWN Device Id: 0 000000 000000000
Firmware Version: 5.0.5c
User Capacity: 120.034.123.776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Feb 4 19:41:08 2018 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0021) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 120 120 050 Pre-fail Always - 0/0
5 Retired_Block_Count 0x0033 100 100 003 Pre-fail Always - 4
9 Power_On_Hours_and_Msec 0x0032 093 093 000 Old_age Always - 6718h+05m+32.960s
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3585
171 Program_Fail_Count 0x0032 000 000 000 Old_age Always - 2
172 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0
174 Unexpect_Power_Loss_Ct 0x0030 000 000 000 Old_age Offline - 335
177 Wear_Range_Delta 0x0000 000 000 000 Old_age Offline - 2
181 Program_Fail_Count 0x0032 000 000 000 Old_age Always - 2
182 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 032 069 000 Old_age Always - 32 (Min/Max 1/69)
195 ECC_Uncorr_Error_Count 0x001c 100 100 000 Old_age Offline - 0/0
196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 4
201 Unc_Soft_Read_Err_Rate 0x001c 100 100 000 Old_age Offline - 0/0
204 Soft_ECC_Correct_Rate 0x001c 100 100 000 Old_age Offline - 0/0
230 Life_Curve_Status 0x0013 100 100 000 Pre-fail Always - 100
231 SSD_Life_Left 0x0013 097 097 010 Pre-fail Always - 0
233 SandForce_Internal 0x0000 000 000 000 Old_age Offline - 22048
234 SandForce_Internal 0x0032 000 000 000 Old_age Always - 7597
241 Lifetime_Writes_GiB 0x0032 000 000 000 Old_age Always - 7597
242 Lifetime_Reads_GiB 0x0032 000 000 000 Old_age Always - 10633
SMART Error Log not supported
SMART Self-test Log not supported
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
sudo dpkg --configure -a
sudo apt-get -f install
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
sudo apt-get clean && sudo apt-get update && sudo apt-get autoremove
Ign http://ch.archive.ubuntu.com trusty InRelease
Ign http://extras.ubuntu.com trusty InRelease
OK http://security.ubuntu.com trusty-security InRelease
OK http://ppa.launchpad.net trusty InRelease
Holen: 1 http://extras.ubuntu.com trusty Release.gpg [71 B]
OK http://security.ubuntu.com trusty-security/main Sources
Holen: 2 http://ch.archive.ubuntu.com trusty-updates InRelease [65,9 kB]
OK http://extras.ubuntu.com trusty Release
OK http://security.ubuntu.com trusty-security/restricted Sources
Holen: 3 http://ppa.launchpad.net trusty InRelease [15,5 kB]
OK http://extras.ubuntu.com trusty/main Sources
OK http://security.ubuntu.com trusty-security/universe Sources
OK http://security.ubuntu.com trusty-security/multiverse Sources
OK http://extras.ubuntu.com trusty/main amd64 Packages
OK http://security.ubuntu.com trusty-security/main amd64 Packages
OK http://extras.ubuntu.com trusty/main i386 Packages
OK http://ppa.launchpad.net trusty InRelease
OK http://ch.archive.ubuntu.com trusty-backports InRelease
OK https://download.jitsi.org stable/ InRelease
OK http://ch.archive.ubuntu.com trusty Release.gpg
OK http://security.ubuntu.com trusty-security/restricted amd64 Packages
OK https://download.jitsi.org stable/ Packages
Holen: 4 http://ch.archive.ubuntu.com trusty-updates/main Sources [410 kB]
OK http://security.ubuntu.com trusty-security/universe amd64 Packages
OK http://ppa.launchpad.net trusty/main amd64 Packages
OK http://security.ubuntu.com trusty-security/multiverse amd64 Packages
OK http://security.ubuntu.com trusty-security/main i386 Packages
OK http://ppa.launchpad.net trusty/main i386 Packages
OK http://security.ubuntu.com trusty-security/restricted i386 Packages
Holen: 5 http://ch.archive.ubuntu.com trusty-updates/restricted Sources [6.322 B]
OK http://security.ubuntu.com trusty-security/universe i386 Packages
OK http://ppa.launchpad.net trusty/main Translation-en
Holen: 6 http://ch.archive.ubuntu.com trusty-updates/universe Sources [196 kB]
OK http://security.ubuntu.com trusty-security/multiverse i386 Packages
Holen: 7 http://ch.archive.ubuntu.com trusty-updates/multiverse Sources [7.368 B]
OK http://security.ubuntu.com trusty-security/main Translation-en
Holen: 8 http://ppa.launchpad.net trusty/main amd64 Packages [5.051 B]
Holen: 9 http://ch.archive.ubuntu.com trusty-updates/main amd64 Packages [1.053 kB]
Holen: 10 http://ppa.launchpad.net trusty/main i386 Packages [5.070 B]
OK http://security.ubuntu.com trusty-security/multiverse Translation-en
OK http://security.ubuntu.com trusty-security/restricted Translation-en
Holen: 11 http://ppa.launchpad.net trusty/main Translation-en [3.228 B]
OK http://security.ubuntu.com trusty-security/universe Translation-en
Ign http://extras.ubuntu.com trusty/main Translation-de_AT
Ign http://extras.ubuntu.com trusty/main Translation-de
OK http://ppa.launchpad.net trusty/main amd64 Packages
Ign http://extras.ubuntu.com trusty/main Translation-en
Ign https://download.jitsi.org stable/ Translation-de_AT
OK http://ppa.launchpad.net trusty/main i386 Packages
Ign https://download.jitsi.org stable/ Translation-de
Ign https://download.jitsi.org stable/ Translation-en
OK http://ppa.launchpad.net trusty/main Translation-en
Holen: 12 http://ch.archive.ubuntu.com trusty-updates/restricted amd64 Packages [17,2 kB]
Holen: 13 http://ch.archive.ubuntu.com trusty-updates/universe amd64 Packages [441 kB]
Holen: 14 http://ch.archive.ubuntu.com trusty-updates/multiverse amd64 Packages [14,6 kB]
Holen: 15 http://ch.archive.ubuntu.com trusty-updates/main i386 Packages [994 kB]
Holen: 16 http://ch.archive.ubuntu.com trusty-updates/restricted i386 Packages [17,1 kB]
Holen: 17 http://ch.archive.ubuntu.com trusty-updates/universe i386 Packages [436 kB]
Holen: 18 http://ch.archive.ubuntu.com trusty-updates/multiverse i386 Packages [15,0 kB]
Holen: 19 http://ch.archive.ubuntu.com trusty-updates/main Translation-en [520 kB]
Holen: 20 http://ch.archive.ubuntu.com trusty-updates/multiverse Translation-en [7.616 B]
Holen: 21 http://ch.archive.ubuntu.com trusty-updates/restricted Translation-en [4.024 B]
Holen: 22 http://ch.archive.ubuntu.com trusty-updates/universe Translation-en [238 kB]
OK http://ch.archive.ubuntu.com trusty-backports/main Sources
OK http://ch.archive.ubuntu.com trusty-backports/restricted Sources
OK http://ch.archive.ubuntu.com trusty-backports/universe Sources
OK http://ch.archive.ubuntu.com trusty-backports/multiverse Sources
OK http://ch.archive.ubuntu.com trusty-backports/main amd64 Packages
OK http://ch.archive.ubuntu.com trusty-backports/restricted amd64 Packages
OK http://ch.archive.ubuntu.com trusty-backports/universe amd64 Packages
OK http://ch.archive.ubuntu.com trusty-backports/multiverse amd64 Packages
OK http://ch.archive.ubuntu.com trusty-backports/main i386 Packages
OK http://ch.archive.ubuntu.com trusty-backports/restricted i386 Packages
OK http://ch.archive.ubuntu.com trusty-backports/universe i386 Packages
OK http://ch.archive.ubuntu.com trusty-backports/multiverse i386 Packages
OK http://ch.archive.ubuntu.com trusty-backports/main Translation-en
OK http://ch.archive.ubuntu.com trusty-backports/multiverse Translation-en
OK http://ch.archive.ubuntu.com trusty-backports/restricted Translation-en
OK http://ch.archive.ubuntu.com trusty-backports/universe Translation-en
OK http://ch.archive.ubuntu.com trusty Release
OK http://ch.archive.ubuntu.com trusty/main Sources
OK http://ch.archive.ubuntu.com trusty/restricted Sources
OK http://ch.archive.ubuntu.com trusty/universe Sources
OK http://ch.archive.ubuntu.com trusty/multiverse Sources
OK http://ch.archive.ubuntu.com trusty/main amd64 Packages
OK http://ch.archive.ubuntu.com trusty/restricted amd64 Packages
OK http://ch.archive.ubuntu.com trusty/universe amd64 Packages
OK http://ch.archive.ubuntu.com trusty/multiverse amd64 Packages
OK http://ch.archive.ubuntu.com trusty/main i386 Packages
OK http://ch.archive.ubuntu.com trusty/restricted i386 Packages
OK http://ch.archive.ubuntu.com trusty/universe i386 Packages
OK http://ch.archive.ubuntu.com trusty/multiverse i386 Packages
OK http://ch.archive.ubuntu.com trusty/main Translation-de
OK http://ch.archive.ubuntu.com trusty/main Translation-en
OK http://ch.archive.ubuntu.com trusty/multiverse Translation-de
OK http://ch.archive.ubuntu.com trusty/multiverse Translation-en
OK http://ch.archive.ubuntu.com trusty/restricted Translation-de
OK http://ch.archive.ubuntu.com trusty/restricted Translation-en
OK http://ch.archive.ubuntu.com trusty/universe Translation-de
OK http://ch.archive.ubuntu.com trusty/universe Translation-en
Ign http://ch.archive.ubuntu.com trusty/main Translation-de_AT
Ign http://ch.archive.ubuntu.com trusty/multiverse Translation-de_AT
Ign http://ch.archive.ubuntu.com trusty/restricted Translation-de_AT
Ign http://ch.archive.ubuntu.com trusty/universe Translation-de_AT
Es wurden 4.473 kB in 22 s geholt (201 kB/s).
Paketlisten werden gelesen... Fertig
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.