andlandl
(Themenstarter)
Anmeldungsdatum: 14. Februar 2007
Beiträge: 49
Wohnort: St. Pölten, Österreich
|
Danke für die Antworten. @praseodym: rtlwifi_new hatte ich testweise im 64Bit System installiert, aber es hat sich dadurch nichts verändert, auch nicht nach den Parametereinstellungen (Antenne, Energiesparmodus etc.) @Dogeater: Also die entweder/ oder Option im Bios hatte ich auch schon einmal aktiviert aber das hat nichts verändert. Als noch das 64Bit System drauf war, hatte ich einen Wlan Stick mit Ralink Chipsatz angesteckt der problemlos funktioniert hat. Auch das Lan hat sich daneben problemlos verbunden.
Der Wlan Adapter von Realtek wurde auch angezeigt und
hat ausgegeben, dass alles, hardware- und softwaremäßig, eingeschaltet ist. Wie gesagt, im 64Bit System wird der Treiber (rtl8723be) und die Firmware geladen aber der Adapter scheint irgendwie inaktiv zu sein. Sobald ich die gleich Linux Version in der 32Bit Variante hochfahre funktioniert das Wlan sofort ohne zusätzliche Einstellungen. Folgender Forenbeitrag
https://forum.ubuntuusers.de/topic/rtl8723be-findet-keine-wlan-netze/
beschreibt mein Problem ziemlich genau, allerdings hat es dort dann mit der Änderung des Antennenanschluses funktioniert was bei mir nicht der Fall war. Die Kernfrage ist, was ist bei der 32Bit Version anders bei Wlan als in der 64Bit Version, gibt es andere Einstellungen, werden andere Hintergrunddienste gestartet, liegts am Prozessor ... ?
|
andlandl
(Themenstarter)
Anmeldungsdatum: 14. Februar 2007
Beiträge: 49
Wohnort: St. Pölten, Österreich
|
Danke für den Hinweis, ich habe noch einmal Ubuntu 16.04 64Bit vom USB Stick gebootet und deinen Befehl getestet. Der Netzwerkmanager findet von selbst kein Netzwerk und wenn ich versuche das Wlan im Haus manuell einzugeben funktioniert es nicht. Hier sind ein paar Befehlsausgaben mit der 64Bit Version: dmesg
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60 | [ 34.968160] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
[ 34.968162] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 34.982186] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
[ 34.982299] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input17
[ 35.265099] Bluetooth: Core ver 2.22
[ 35.265133] NET: Registered protocol family 31
[ 35.265134] Bluetooth: HCI device and connection manager initialized
[ 35.265140] Bluetooth: HCI socket layer initialized
[ 35.265144] Bluetooth: L2CAP socket layer initialized
[ 35.265153] Bluetooth: SCO socket layer initialized
[ 35.466942] media: Linux media interface: v0.10
[ 35.581082] rtl8723be: Using firmware rtlwifi/rtl8723befw.bin
[ 35.590235] kvm: disabled by bios
[ 35.672922] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 35.673342] rtlwifi: rtlwifi: wireless switch is on
[ 35.680006] EDAC MC: Ver: 3.0.0
[ 35.686080] MCE: In-kernel MCE decoding enabled.
[ 35.691204] Linux video capture interface: v2.00
[ 35.766813] EDAC amd64: DRAM ECC disabled.
[ 35.766816] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 35.769928] usbcore: registered new interface driver btusb
[ 36.040609] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 36.040613] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_config.bin
[ 36.041294] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[ 36.041297] Bluetooth: hci0: Failed to load rtl_bt/rtl8723b_config.bin
[ 36.041303] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[ 36.122908] uvcvideo: Found UVC 1.00 device HP HD Webcam (05c8:0374)
[ 36.131789] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[ 36.131795] uvcvideo 1-5:1.0: Entity type for entity Extension 3 was not initialized!
[ 36.131799] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[ 36.131802] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[ 36.131995] input: HP HD Webcam as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input18
[ 36.132147] usbcore: registered new interface driver uvcvideo
[ 36.132148] USB Video Class driver (1.1.1)
[ 36.176636] Bluetooth: hci0: rom_version status=0 version=1
[ 36.176655] Bluetooth: cfg_sz 0, total size 22496
[ 36.275103] input: HP WMI hotkeys as /devices/virtual/input/input19
[ 36.558853] rtl8723be 0000:02:00.0 wlo1: renamed from wlan0
[ 37.824758] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 37.824761] Bluetooth: BNEP filters: protocol multicast
[ 37.824769] Bluetooth: BNEP socket layer initialized
[ 38.635667] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 39.188061] AMD-Vi: Event logged [
[ 39.188067] INVALID_DEVICE_REQUEST device=00:00.1 address=0x000000fdf80c0020 flags=0x0a00]
[ 39.198286] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 39.206211] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 39.261037] r8169 0000:01:00.0 enp1s0: link down
[ 39.261124] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 39.761211] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 47.855830] Bluetooth: RFCOMM TTY layer initialized
[ 47.855848] Bluetooth: RFCOMM socket layer initialized
[ 47.855856] Bluetooth: RFCOMM ver 1.11
[ 48.064231] usb 3-3: reset full-speed USB device number 2 using ohci-pci
[ 49.787992] Bluetooth: hci0 command 0x0c24 tx timeout
[ 51.804204] Bluetooth: hci0 command 0x0c52 tx timeout
[ 85.064310] Non-volatile memory driver v1.3
[ 92.691904] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 92.727786] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
|
iwconfig
| enp1s0 no wireless extensions.
lo no wireless extensions.
wlo1 IEEE 802.11 ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry short limit:7 RTS thr=2347 B Fragment thr:off
Power Management:off
|
Und so siehts aus, wenn ich das installierte 32Bit System boote: dmesg
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70 | [ 12.698733] Bluetooth: HCI socket layer initialized
[ 12.698736] Bluetooth: L2CAP socket layer initialized
[ 12.698744] Bluetooth: SCO socket layer initialized
[ 12.723437] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[ 12.726189] usbcore: registered new interface driver btusb
[ 12.727536] rtl8723be: Using firmware rtlwifi/rtl8723befw_36.bin
[ 12.728746] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 12.728751] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_config.bin
[ 12.744745] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[ 12.744754] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[ 12.745265] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input14
[ 12.750172] Bluetooth: hci0: rom_version status=0 version=1
[ 12.750191] Bluetooth: cfg_sz 0, total size 22496
[ 12.758723] media: Linux media interface: v0.10
[ 12.762874] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 12.762878] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.762881] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 12.762883] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 12.762885] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 12.762887] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
[ 12.762890] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 12.772392] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 12.773016] rtlwifi: rtlwifi: wireless switch is on
[ 12.780897] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
[ 12.781008] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
[ 12.802908] Linux video capture interface: v2.00
[ 12.916228] uvcvideo: Found UVC 1.00 device HP HD Webcam (05c8:0374)
[ 12.932426] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[ 12.932431] uvcvideo 1-5:1.0: Entity type for entity Extension 3 was not initialized!
[ 12.932433] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[ 12.932436] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[ 12.932746] input: HP HD Webcam: HP HD Webcam as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input18
[ 12.932854] usbcore: registered new interface driver uvcvideo
[ 12.932855] USB Video Class driver (1.1.1)
[ 12.952992] input: HP WMI hotkeys as /devices/virtual/input/input17
[ 13.107320] kvm: disabled by bios
[ 13.158473] Adding 4198396k swap on /dev/sda2. Priority:-1 extents:1 across:4198396k SSFS
[ 13.160731] kvm: disabled by bios
[ 13.162219] MCE: In-kernel MCE decoding enabled.
[ 13.170538] EDAC amd64: Node 0: DRAM ECC disabled.
[ 13.170541] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 13.194197] rtl8723be 0000:02:00.0 wlo1: renamed from wlan0
[ 13.222920] EDAC amd64: Node 0: DRAM ECC disabled.
[ 13.222926] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 13.377998] new mount options do not match the existing superblock, will be ignored
[ 13.709125] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 13.766293] r8169 0000:01:00.0 enp1s0: link down
[ 13.766380] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 13.773784] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 13.862464] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input19
[ 13.910983] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 13.910986] Bluetooth: BNEP filters: protocol multicast
[ 13.910992] Bluetooth: BNEP socket layer initialized
[ 14.263843] random: crng init done
[ 14.342945] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 14.448419] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 16.845522] wlo1: authenticate with a0:4f:d4:ed:d5:6d
[ 16.867542] wlo1: send auth to a0:4f:d4:ed:d5:6d (try 1/3)
[ 16.871173] wlo1: authenticated
[ 16.872079] wlo1: associate with a0:4f:d4:ed:d5:6d (try 1/3)
[ 16.877610] wlo1: RX AssocResp from a0:4f:d4:ed:d5:6d (capab=0x1411 status=0 aid=1)
[ 16.878141] wlo1: associated
[ 16.878200] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 17.353545] Bluetooth: RFCOMM TTY layer initialized
[ 17.353555] Bluetooth: RFCOMM socket layer initialized
[ 17.353562] Bluetooth: RFCOMM ver 1.11
|
iwconfig
1
2
3
4
5
6
7
8
9
10
11
12 | wlo1 IEEE 802.11 ESSID:"Sams"
Mode:Managed Frequency:2.437 GHz Access Point: A0:4F:D4:ED:D5:6D
Bit Rate=72.2 Mb/s Tx-Power=20 dBm
Retry short limit:7 RTS thr=2347 B Fragment thr:off
Power Management:on
Link Quality=64/70 Signal level=-46 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:27 Missed beacon:0
enp1s0 no wireless extensions.
lo no wireless extensions.
|
Wie gesagt, mit dem 32Bit System funktioniert mein Notebook für meine Zwecke gut. Eine Lösung für das Problem ist nicht dringend aber in naher Zukunft würde ich doch gerne wieder auf ein 64Bit System wechseln.
Und außerdem ist dieses Verhalten wirklich rätselhaft.
|
andlandl
(Themenstarter)
Anmeldungsdatum: 14. Februar 2007
Beiträge: 49
Wohnort: St. Pölten, Österreich
|
Es funktioniert unter Ubuntu 16.4 64Bit !!! Lan funktioniert übrigens auch ohne das "workaround". Die Lösung war, dass beim Boot in der grub Befehlszeile der Parameter intremap=off übergeben werden muss. Hier die Details: Zuerst danke an praseodym, dass dir die Fehlermeldung aufgefallen ist. Die habe ich dann gegoogelt und folgenden Forenbeitrag gefunden:
https://forums.fedoraforum.org/showthread.php?300746-HP-Elitebook-755-G2-no-wireless
Hier ist die Vorgehensweise dann erklärt. Beim Booten von der Live-Version habe ich dann den Parameter angehängt und ... Wlan funktioniert! Ich habe das Thema noch nicht auf gelöst umgestellt, weil ich noch nicht weiß, ob intremap=off sonst irgendwelche Probleme macht oder nicht. Hier ist noch die vollständige Ausgabe von dmesg 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071 | [ 0.000000] Linux version 4.10.0-28-generic (buildd@lgw01-12) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #32~16.04.2-Ubuntu SMP Thu Jul 20 10:19:48 UTC 2017 (Ubuntu 4.10.0-28.32~16.04.2-generic 4.10.17)
[ 0.000000] Command line: file=/cdrom/preseed/ubuntu-mate.seed boot=casper initrd=/casper/initrd.lz quiet splash intremap=off priority=low debian-installer/language=de keyboard-configuration/layoutcode?=de
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009d9b7fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d9b8000-0x000000009e8b3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009e8b4000-0x000000009efb3fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009efb4000-0x000000009effefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009efff000-0x000000009effffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP ProBook 455 G2/2235, BIOS M75 Ver. 01.09 12/04/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x13f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-through
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 0000FF800000 mask FFFFFF800000 write-protect
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000013f000000 aka 5104M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x9f000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff8ab180096000] 96000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x8e028000, 0x8e028fff] PGTABLE
[ 0.000000] BRK [0x8e029000, 0x8e029fff] PGTABLE
[ 0.000000] BRK [0x8e02a000, 0x8e02afff] PGTABLE
[ 0.000000] BRK [0x8e02b000, 0x8e02bfff] PGTABLE
[ 0.000000] BRK [0x8e02c000, 0x8e02cfff] PGTABLE
[ 0.000000] BRK [0x8e02d000, 0x8e02dfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x7e43e000-0x7fffffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F2F90 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 0x000000009EFFD0E8 0000A4 (v01 HPQOEM SLIC-MPC 00000003 01000013)
[ 0.000000] ACPI: FACP 0x000000009EFFB000 00010C (v05 HPQOEM 2235 00000003 HP 00000001)
[ 0.000000] ACPI: DSDT 0x000000009EFD8000 01E819 (v01 HPQOEM 2235 00000001 INTL 20130927)
[ 0.000000] ACPI: FACS 0x000000009ED7B000 000040
[ 0.000000] ACPI: HPET 0x000000009EFFA000 000038 (v01 HPQOEM 2235 00000001 HP 00000001)
[ 0.000000] ACPI: APIC 0x000000009EFF9000 000090 (v01 HPQOEM 2235 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 0x000000009EFF8000 00003C (v01 HPQOEM 2235 00000001 HP 00000001)
[ 0.000000] ACPI: TCPA 0x000000009EFF7000 000032 (v02 HPQOEM 2235 00000000 HP 00000001)
[ 0.000000] ACPI: SLIC 0x000000009EFD6000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
[ 0.000000] ACPI: MSDM 0x000000009EFD5000 000055 (v03 HPQOEM SLIC-MPC 00000000 HP 00000001)
[ 0.000000] ACPI: FPDT 0x000000009EFD4000 000044 (v01 HPQOEM 2235 00000001 HP 00000001)
[ 0.000000] ACPI: BGRT 0x000000009EFD3000 000038 (v00 HPQOEM 2235 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT 0x000000009EFD2000 000B9C (v01 AMD BALLINA 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000009EFC8000 009399 (v02 AMD BALLINA 00000002 MSFT 04000000)
[ 0.000000] ACPI: IVRS 0x000000009EFC7000 000078 (v02 AMD BALLINA 00000001 AMD 00000000)
[ 0.000000] ACPI: CRAT 0x000000009EFC6000 000528 (v01 AMD BALLINA 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000009EFC5000 000325 (v01 HP HPZPODDT 00000001 INTL 20130927)
[ 0.000000] ACPI: SSDT 0x000000009EFC4000 00081B (v01 AMD CPMADPS4 00000001 INTL 20130927)
[ 0.000000] ACPI: SSDT 0x000000009EFC2000 001207 (v01 AMD CPMCMN 00000001 INTL 20130927)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x13efd3000-0x13effdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000013effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009bfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000009d9b7fff]
[ 0.000000] node 0: [mem 0x000000009efff000-0x000000009effffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000013effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013effffff]
[ 0.000000] On node 0 totalpages: 903508
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10023 pages used for memmap
[ 0.000000] DMA32 zone: 641465 pages, LIFO batch:31
[ 0.000000] Normal zone: 4032 pages used for memmap
[ 0.000000] Normal zone: 258048 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d9b8000-0x9e8b3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e8b4000-0x9efb3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9efb4000-0x9effefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[ 0.000000] e820: [mem 0x9f000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 36 pages/cpu @ffff8ab2bec00000 s107992 r8192 d31272 u524288
[ 0.000000] pcpu-alloc: s107992 r8192 d31272 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 889368
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: file=/cdrom/preseed/ubuntu-mate.seed boot=casper initrd=/casper/initrd.lz quiet splash intremap=off priority=low debian-installer/language=de keyboard-configuration/layoutcode?=de
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3440720K/3614032K available (9060K kernel code, 1666K rwdata, 3824K rodata, 2228K init, 2364K bss, 173312K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:524544 nr_irqs:1000 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1796.614 MHz processor
[ 0.000033] Calibrating delay loop (skipped), value calculated using timer frequency.. 3593.22 BogoMIPS (lpj=7186456)
[ 0.000036] pid_max: default: 32768 minimum: 301
[ 0.000048] ACPI: Core revision 20160930
[ 0.019897] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.019946] Security Framework initialized
[ 0.019947] Yama: becoming mindful.
[ 0.019969] AppArmor: AppArmor initialized
[ 0.020421] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.022184] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.022991] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.022999] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.023456] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[ 0.023463] CPU: Physical Processor ID: 0
[ 0.023463] CPU: Processor Core ID: 0
[ 0.023465] mce: CPU supports 7 MCE banks
[ 0.023474] LVT offset 1 assigned for vector 0xf9
[ 0.023483] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.023484] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.023655] Freeing SMP alternatives memory: 32K
[ 0.062894] ftrace: allocating 34206 entries in 134 pages
[ 0.086143] smpboot: Max logical packages: 1
[ 0.086847] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.231194] smpboot: CPU0: AMD A8-7100 Radeon R5, 8 Compute Cores 4C+4G (family: 0x15, model: 0x30, stepping: 0x1)
[ 0.231282] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.231289] ... version: 0
[ 0.231290] ... bit width: 48
[ 0.231290] ... generic registers: 6
[ 0.231291] ... value mask: 0000ffffffffffff
[ 0.231292] ... max period: 00007fffffffffff
[ 0.231293] ... fixed-purpose events: 0
[ 0.231294] ... event mask: 000000000000003f
[ 0.232463] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.232486] smp: Bringing up secondary CPUs ...
[ 0.232617] x86: Booting SMP configuration:
[ 0.232618] .... node #0, CPUs: #1 #2 #3
[ 0.240103] smp: Brought up 1 node, 4 CPUs
[ 0.240105] smpboot: Total of 4 processors activated (14372.91 BogoMIPS)
[ 0.241327] devtmpfs: initialized
[ 0.241421] x86/mm: Memory block size: 128MB
[ 0.244596] evm: security.selinux
[ 0.244596] evm: security.SMACK64
[ 0.244597] evm: security.SMACK64EXEC
[ 0.244598] evm: security.SMACK64TRANSMUTE
[ 0.244598] evm: security.SMACK64MMAP
[ 0.244599] evm: security.ima
[ 0.244600] evm: security.capability
[ 0.244758] PM: Registering ACPI NVS region [mem 0x9e8b4000-0x9efb3fff] (7340032 bytes)
[ 0.244970] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.244985] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.245050] pinctrl core: initialized pinctrl subsystem
[ 0.245254] RTC time: 14:26:06, date: 02/15/18
[ 0.245388] NET: Registered protocol family 16
[ 0.255211] cpuidle: using governor ladder
[ 0.271235] cpuidle: using governor menu
[ 0.271239] PCCT header not found.
[ 0.271567] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.271569] ACPI: bus type PCI registered
[ 0.271571] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.271757] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.271947] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.271962] PCI: Using configuration type 1 for base access
[ 0.272345] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.272346] mtrr: probably your BIOS does not setup all CPUs.
[ 0.272346] mtrr: corrected configuration.
[ 0.287684] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.287686] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.288171] ACPI: Added _OSI(Module Device)
[ 0.288173] ACPI: Added _OSI(Processor Device)
[ 0.288174] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.288175] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.411230] ACPI : EC: EC started
[ 0.411232] ACPI : EC: interrupt blocked
[ 2.659582] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 2.659585] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 2.659586] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 2.659588] ACPI: Interpreter enabled
[ 2.659627] ACPI: (supports S0 S3 S4 S5)
[ 2.659629] ACPI: Using IOAPIC for interrupt routing
[ 2.659927] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 2.663609] ACPI: Power Resource [APPR] (off)
[ 2.670916] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 2.671270] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 2.671277] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 2.671647] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 2.671648] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 2.671733] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf5ff])
[ 2.671735] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff window] (conflicts with Adapter ROM [mem 0x000cf800-0x000d07ff])
[ 2.672077] PCI host bridge to bus 0000:00
[ 2.672079] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 2.672081] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 2.672082] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 2.672084] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 2.672086] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 2.672087] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 2.672089] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 2.672090] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 2.672094] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 2.672095] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 2.672096] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 2.672098] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 2.672099] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 2.672100] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 2.672102] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
[ 2.672103] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed3ffff window]
[ 2.672105] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xfffdffff window]
[ 2.672107] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.672116] pci 0000:00:00.0: [1022:1422] type 00 class 0x060000
[ 2.672295] pci 0000:00:00.2: [1022:1423] type 00 class 0x080600
[ 2.672451] pci 0000:00:01.0: [1002:1318] type 00 class 0x030000
[ 2.672465] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 2.672475] pci 0000:00:01.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
[ 2.672481] pci 0000:00:01.0: reg 0x20: [io 0x5000-0x50ff]
[ 2.672487] pci 0000:00:01.0: reg 0x24: [mem 0xd6800000-0xd683ffff]
[ 2.672494] pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 2.672534] pci 0000:00:01.0: supports D1 D2
[ 2.672536] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[ 2.672641] pci 0000:00:01.1: [1002:1308] type 00 class 0x040300
[ 2.672654] pci 0000:00:01.1: reg 0x10: [mem 0xd6840000-0xd6843fff 64bit]
[ 2.672711] pci 0000:00:01.1: supports D1 D2
[ 2.672853] pci 0000:00:02.0: [1022:1424] type 00 class 0x060000
[ 2.672986] pci 0000:00:03.0: [1022:1424] type 00 class 0x060000
[ 2.673104] pci 0000:00:03.1: [1022:1426] type 01 class 0x060400
[ 2.673171] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[ 2.673219] pci 0000:00:03.1: System wakeup disabled by ACPI
[ 2.673261] pci 0000:00:03.2: [1022:1426] type 01 class 0x060400
[ 2.673326] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
[ 2.673373] pci 0000:00:03.2: System wakeup disabled by ACPI
[ 2.673519] pci 0000:00:03.4: [1022:1426] type 01 class 0x060400
[ 2.673588] pci 0000:00:03.4: PME# supported from D0 D3hot D3cold
[ 2.673647] pci 0000:00:03.4: System wakeup disabled by ACPI
[ 2.673754] pci 0000:00:04.0: [1022:1424] type 00 class 0x060000
[ 2.673918] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 2.673943] pci 0000:00:10.0: reg 0x10: [mem 0xd6848000-0xd6849fff 64bit]
[ 2.674052] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 2.674109] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 2.674198] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 2.674216] pci 0000:00:11.0: reg 0x10: [io 0x5118-0x511f]
[ 2.674226] pci 0000:00:11.0: reg 0x14: [io 0x5124-0x5127]
[ 2.674236] pci 0000:00:11.0: reg 0x18: [io 0x5110-0x5117]
[ 2.674245] pci 0000:00:11.0: reg 0x1c: [io 0x5120-0x5123]
[ 2.674255] pci 0000:00:11.0: reg 0x20: [io 0x5100-0x510f]
[ 2.674265] pci 0000:00:11.0: reg 0x24: [mem 0xd684f000-0xd684f7ff]
[ 2.674474] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 2.674489] pci 0000:00:12.0: reg 0x10: [mem 0xd684e000-0xd684efff]
[ 2.674616] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 2.674661] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 2.674677] pci 0000:00:12.2: reg 0x10: [mem 0xd684d000-0xd684d0ff]
[ 2.674758] pci 0000:00:12.2: supports D1 D2
[ 2.674759] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.674800] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 2.674875] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 2.674888] pci 0000:00:13.0: reg 0x10: [mem 0xd684c000-0xd684cfff]
[ 2.674995] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 2.675040] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 2.675057] pci 0000:00:13.2: reg 0x10: [mem 0xd684b000-0xd684b0ff]
[ 2.675144] pci 0000:00:13.2: supports D1 D2
[ 2.675145] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.675185] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 2.675259] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 2.675424] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 2.675444] pci 0000:00:14.2: reg 0x10: [mem 0xd6844000-0xd6847fff 64bit]
[ 2.675511] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 2.675550] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 2.675617] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 2.675781] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 2.675908] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
[ 2.675921] pci 0000:00:14.5: reg 0x10: [mem 0xd684a000-0xd684afff]
[ 2.676136] pci 0000:00:18.0: [1022:141a] type 00 class 0x060000
[ 2.676221] pci 0000:00:18.1: [1022:141b] type 00 class 0x060000
[ 2.676301] pci 0000:00:18.2: [1022:141c] type 00 class 0x060000
[ 2.676383] pci 0000:00:18.3: [1022:141d] type 00 class 0x060000
[ 2.676467] pci 0000:00:18.4: [1022:141e] type 00 class 0x060000
[ 2.676548] pci 0000:00:18.5: [1022:141f] type 00 class 0x060000
[ 2.676792] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 2.676815] pci 0000:01:00.0: reg 0x10: [io 0x4000-0x40ff]
[ 2.676845] pci 0000:01:00.0: reg 0x18: [mem 0xd5804000-0xd5804fff 64bit]
[ 2.676866] pci 0000:01:00.0: reg 0x20: [mem 0xd5800000-0xd5803fff 64bit]
[ 2.676964] pci 0000:01:00.0: supports D1 D2
[ 2.676966] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.677029] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 2.687165] pci 0000:00:03.1: PCI bridge to [bus 01]
[ 2.687171] pci 0000:00:03.1: bridge window [io 0x4000-0x4fff]
[ 2.687176] pci 0000:00:03.1: bridge window [mem 0xd5800000-0xd67fffff]
[ 2.687180] pci 0000:00:03.1: bridge window [mem 0xd0800000-0xd17fffff 64bit pref]
[ 2.687411] pci 0000:02:00.0: [10ec:b723] type 00 class 0x028000
[ 2.687434] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 2.687462] pci 0000:02:00.0: reg 0x18: [mem 0xd4800000-0xd4803fff 64bit]
[ 2.687639] pci 0000:02:00.0: supports D1 D2
[ 2.687640] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.699213] pci 0000:00:03.2: PCI bridge to [bus 02]
[ 2.699220] pci 0000:00:03.2: bridge window [io 0x3000-0x3fff]
[ 2.699225] pci 0000:00:03.2: bridge window [mem 0xd4800000-0xd57fffff]
[ 2.699229] pci 0000:00:03.2: bridge window [mem 0xd1800000-0xd27fffff 64bit pref]
[ 2.699383] pci 0000:03:00.0: [10ec:5229] type 00 class 0xff0000
[ 2.699412] pci 0000:03:00.0: reg 0x10: [mem 0xd3800000-0xd3800fff]
[ 2.699547] pci 0000:03:00.0: supports D1 D2
[ 2.699548] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[ 2.711155] pci 0000:00:03.4: PCI bridge to [bus 03]
[ 2.711162] pci 0000:00:03.4: bridge window [io 0x2000-0x2fff]
[ 2.711166] pci 0000:00:03.4: bridge window [mem 0xd3800000-0xd47fffff]
[ 2.711171] pci 0000:00:03.4: bridge window [mem 0xd2800000-0xd37fffff 64bit pref]
[ 2.711343] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 2.711353] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 2.711355] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 2.711356] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 2.711357] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[ 2.711358] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
[ 2.711360] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[ 2.711361] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 2.711362] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 2.711364] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 2.711365] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 2.711366] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 2.711368] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[ 2.711369] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
[ 2.711370] pci 0000:00:14.4: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[ 2.711371] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
[ 2.711373] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfed3ffff window] (subtractive decode)
[ 2.711374] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xfffdffff window] (subtractive decode)
[ 2.712888] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 2.712982] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 2.713077] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 2.713186] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 2.713252] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 2.713301] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 2.713351] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 2.713400] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 2.713731] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 2.713859] ACPI : EC: interrupt unblocked
[ 2.713897] ACPI : EC: event unblocked
[ 2.713920] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 2.713922] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 2.714415] SCSI subsystem initialized
[ 2.714468] libata version 3.00 loaded.
[ 2.714530] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[ 2.714532] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 2.714544] pci 0000:00:01.0: vgaarb: bridge control possible
[ 2.714544] vgaarb: loaded
[ 2.714570] ACPI: bus type USB registered
[ 2.714593] usbcore: registered new interface driver usbfs
[ 2.714604] usbcore: registered new interface driver hub
[ 2.714621] usbcore: registered new device driver usb
[ 2.714825] PCI: Using ACPI for IRQ routing
[ 2.724176] PCI: pci_cache_line_size set to 64 bytes
[ 2.724450] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 2.724452] e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]
[ 2.724454] e820: reserve RAM buffer [mem 0x9d9b8000-0x9fffffff]
[ 2.724455] e820: reserve RAM buffer [mem 0x9f000000-0x9fffffff]
[ 2.724456] e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
[ 2.724593] NetLabel: Initializing
[ 2.724594] NetLabel: domain hash size = 128
[ 2.724594] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 2.724614] NetLabel: unlabeled traffic allowed by default
[ 2.724924] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 2.724928] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 2.728155] clocksource: Switched to clocksource hpet
[ 2.740351] VFS: Disk quotas dquot_6.6.0
[ 2.740377] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.740529] AppArmor: AppArmor Filesystem Enabled
[ 2.740607] pnp: PnP ACPI init
[ 2.740787] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 2.740789] system 00:00: [mem 0xfeb00000-0xfeb00fff] has been reserved
[ 2.740791] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 2.740793] system 00:00: [mem 0xfec20000-0xfec20fff] could not be reserved
[ 2.740795] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 2.740800] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.741122] system 00:01: [io 0x0400-0x04cf] has been reserved
[ 2.741124] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 2.741125] system 00:01: [io 0x04d6] has been reserved
[ 2.741127] system 00:01: [io 0x0680-0x06ff] has been reserved
[ 2.741128] system 00:01: [io 0x077a] has been reserved
[ 2.741130] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 2.741132] system 00:01: [io 0x0c14] has been reserved
[ 2.741133] system 00:01: [io 0x0c50-0x0c52] has been reserved
[ 2.741135] system 00:01: [io 0x0c6c] has been reserved
[ 2.741136] system 00:01: [io 0x0c6f] has been reserved
[ 2.741138] system 00:01: [io 0x0cd0-0x0cdb] has been reserved
[ 2.741139] system 00:01: [io 0x0220-0x0227] has been reserved
[ 2.741141] system 00:01: [io 0x0260-0x0273] has been reserved
[ 2.741142] system 00:01: [io 0x0800] has been reserved
[ 2.741144] system 00:01: [io 0x0804] has been reserved
[ 2.741145] system 00:01: [io 0x087f] has been reserved
[ 2.741147] system 00:01: [io 0x0cdc-0x0cdf] has been reserved
[ 2.741149] system 00:01: [io 0x0b00-0x0b0f] has been reserved
[ 2.741150] system 00:01: [io 0x0200-0x027f] could not be reserved
[ 2.741152] system 00:01: [io 0x1770-0x1777] has been reserved
[ 2.741155] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.741233] system 00:02: [mem 0x00000000-0x0009ffff] could not be reserved
[ 2.741235] system 00:02: [mem 0x00100000-0xbfffffff] could not be reserved
[ 2.741237] system 00:02: [mem 0xffe00000-0xffffffff] could not be reserved
[ 2.741240] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 2.741367] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 2.741405] pnp 00:04: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[ 2.741430] pnp 00:05: Plug and Play ACPI device, IDs SYN301b SYN0100 SYN0002 PNP0f13 (active)
[ 2.741792] pnp 00:06: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 2.742003] pnp: PnP ACPI: found 7 devices
[ 2.749420] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 2.749428] pci 0000:00:01.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[ 2.749466] pci 0000:00:01.0: BAR 6: assigned [mem 0xd6860000-0xd687ffff pref]
[ 2.749469] pci 0000:00:03.1: PCI bridge to [bus 01]
[ 2.749472] pci 0000:00:03.1: bridge window [io 0x4000-0x4fff]
[ 2.749477] pci 0000:00:03.1: bridge window [mem 0xd5800000-0xd67fffff]
[ 2.749480] pci 0000:00:03.1: bridge window [mem 0xd0800000-0xd17fffff 64bit pref]
[ 2.749485] pci 0000:00:03.2: PCI bridge to [bus 02]
[ 2.749487] pci 0000:00:03.2: bridge window [io 0x3000-0x3fff]
[ 2.749491] pci 0000:00:03.2: bridge window [mem 0xd4800000-0xd57fffff]
[ 2.749494] pci 0000:00:03.2: bridge window [mem 0xd1800000-0xd27fffff 64bit pref]
[ 2.749499] pci 0000:00:03.4: PCI bridge to [bus 03]
[ 2.749501] pci 0000:00:03.4: bridge window [io 0x2000-0x2fff]
[ 2.749505] pci 0000:00:03.4: bridge window [mem 0xd3800000-0xd47fffff]
[ 2.749508] pci 0000:00:03.4: bridge window [mem 0xd2800000-0xd37fffff 64bit pref]
[ 2.749513] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 2.749557] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 2.749559] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 2.749560] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 2.749562] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 2.749563] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 2.749565] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 2.749566] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff window]
[ 2.749567] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff window]
[ 2.749569] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff window]
[ 2.749570] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff window]
[ 2.749572] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff window]
[ 2.749573] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff window]
[ 2.749574] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff window]
[ 2.749576] pci_bus 0000:00: resource 17 [mem 0x000f0000-0x000fffff window]
[ 2.749577] pci_bus 0000:00: resource 18 [mem 0xc0000000-0xdfffffff window]
[ 2.749578] pci_bus 0000:00: resource 19 [mem 0xf0000000-0xfed3ffff window]
[ 2.749580] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xfffdffff window]
[ 2.749581] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 2.749583] pci_bus 0000:01: resource 1 [mem 0xd5800000-0xd67fffff]
[ 2.749584] pci_bus 0000:01: resource 2 [mem 0xd0800000-0xd17fffff 64bit pref]
[ 2.749586] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 2.749587] pci_bus 0000:02: resource 1 [mem 0xd4800000-0xd57fffff]
[ 2.749589] pci_bus 0000:02: resource 2 [mem 0xd1800000-0xd27fffff 64bit pref]
[ 2.749590] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 2.749591] pci_bus 0000:03: resource 1 [mem 0xd3800000-0xd47fffff]
[ 2.749593] pci_bus 0000:03: resource 2 [mem 0xd2800000-0xd37fffff 64bit pref]
[ 2.749595] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 2.749596] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 2.749598] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 2.749599] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 2.749600] pci_bus 0000:04: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 2.749602] pci_bus 0000:04: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 2.749603] pci_bus 0000:04: resource 10 [mem 0x000d4000-0x000d7fff window]
[ 2.749605] pci_bus 0000:04: resource 11 [mem 0x000d8000-0x000dbfff window]
[ 2.749606] pci_bus 0000:04: resource 12 [mem 0x000dc000-0x000dffff window]
[ 2.749607] pci_bus 0000:04: resource 13 [mem 0x000e0000-0x000e3fff window]
[ 2.749609] pci_bus 0000:04: resource 14 [mem 0x000e4000-0x000e7fff window]
[ 2.749610] pci_bus 0000:04: resource 15 [mem 0x000e8000-0x000ebfff window]
[ 2.749612] pci_bus 0000:04: resource 16 [mem 0x000ec000-0x000effff window]
[ 2.749613] pci_bus 0000:04: resource 17 [mem 0x000f0000-0x000fffff window]
[ 2.749615] pci_bus 0000:04: resource 18 [mem 0xc0000000-0xdfffffff window]
[ 2.749616] pci_bus 0000:04: resource 19 [mem 0xf0000000-0xfed3ffff window]
[ 2.749617] pci_bus 0000:04: resource 20 [mem 0xfed45000-0xfffdffff window]
[ 2.749710] NET: Registered protocol family 2
[ 2.749939] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 2.750075] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 2.750290] TCP: Hash tables configured (established 32768 bind 32768)
[ 2.750347] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 2.750371] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 2.750436] NET: Registered protocol family 1
[ 2.750457] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 2.868977] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 2.928664] Unpacking initramfs...
[ 10.882799] Freeing initrd memory: 28424K
[ 11.084092] AMD-Vi: IOMMU performance counters supported
[ 11.084100] AMD-Vi: Applying ATS write check workaround for IOMMU at 0000:00:00.2
[ 11.084477] pci 0000:00:00.2: can't derive routing for PCI INT A
[ 11.084479] pci 0000:00:00.2: PCI INT A: no GSI
[ 11.084649] iommu: Adding device 0000:00:00.0 to group 0
[ 11.084736] iommu: Adding device 0000:00:01.0 to group 1
[ 11.084761] iommu: Using direct mapping for device 0000:00:01.0
[ 11.084785] iommu: Adding device 0000:00:01.1 to group 1
[ 11.084834] iommu: Adding device 0000:00:02.0 to group 2
[ 11.084920] iommu: Adding device 0000:00:03.0 to group 3
[ 11.084945] iommu: Adding device 0000:00:03.1 to group 3
[ 11.084968] iommu: Adding device 0000:00:03.2 to group 3
[ 11.084990] iommu: Adding device 0000:00:03.4 to group 3
[ 11.085057] iommu: Adding device 0000:00:04.0 to group 4
[ 11.085206] iommu: Adding device 0000:00:10.0 to group 5
[ 11.085264] iommu: Adding device 0000:00:11.0 to group 6
[ 11.085334] iommu: Adding device 0000:00:12.0 to group 7
[ 11.085352] iommu: Adding device 0000:00:12.2 to group 7
[ 11.085423] iommu: Adding device 0000:00:13.0 to group 8
[ 11.085442] iommu: Adding device 0000:00:13.2 to group 8
[ 11.085524] iommu: Adding device 0000:00:14.0 to group 9
[ 11.085545] iommu: Adding device 0000:00:14.2 to group 9
[ 11.085564] iommu: Adding device 0000:00:14.3 to group 9
[ 11.085630] iommu: Adding device 0000:00:14.4 to group 10
[ 11.085684] iommu: Adding device 0000:00:14.5 to group 11
[ 11.085769] iommu: Adding device 0000:00:18.0 to group 12
[ 11.085789] iommu: Adding device 0000:00:18.1 to group 12
[ 11.085810] iommu: Adding device 0000:00:18.2 to group 12
[ 11.085829] iommu: Adding device 0000:00:18.3 to group 12
[ 11.085849] iommu: Adding device 0000:00:18.4 to group 12
[ 11.085868] iommu: Adding device 0000:00:18.5 to group 12
[ 11.085887] iommu: Adding device 0000:01:00.0 to group 3
[ 11.085967] iommu: Adding device 0000:02:00.0 to group 3
[ 11.085985] iommu: Adding device 0000:03:00.0 to group 3
[ 11.086629] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 11.086630] AMD-Vi: Extended features (0x800090a52):
[ 11.086631] PPR GT IA PC
[ 11.087082] AMD-Vi: Lazy IO/TLB flushing enabled
[ 11.089158] perf: AMD NB counters detected
[ 11.089482] LVT offset 0 assigned for vector 0x400
[ 11.089537] perf: AMD IBS detected (0x000001ff)
[ 11.089567] perf: amd_iommu: Detected. (2 banks, 4 counters/bank)
[ 11.089665] Scanning for low memory corruption every 60 seconds
[ 11.090257] audit: initializing netlink subsys (disabled)
[ 11.090383] audit: type=2000 audit(1518704776.944:1): initialized
[ 11.090841] Initialise system trusted keyrings
[ 11.091008] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 11.093244] zbud: loaded
[ 11.093945] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 11.094481] fuse init (API version 7.26)
[ 11.096768] Key type asymmetric registered
[ 11.096770] Asymmetric key parser 'x509' registered
[ 11.096827] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 11.096901] io scheduler noop registered
[ 11.096902] io scheduler deadline registered
[ 11.096913] io scheduler cfq registered (default)
[ 11.098098] pcieport 0000:00:03.1: Signaling PME with IRQ 25
[ 11.098120] pcieport 0000:00:03.2: Signaling PME with IRQ 26
[ 11.098143] pcieport 0000:00:03.4: Signaling PME with IRQ 27
[ 11.098169] pciehp 0000:00:03.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ LLActRep+
[ 11.098275] pciehp 0000:00:03.4:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ LLActRep+
[ 11.098873] ACPI: AC Adapter [AC] (off-line)
[ 11.098968] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 11.098972] ACPI: Sleep Button [SLPB]
[ 11.099110] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 11.099146] ACPI: Lid Switch [LID]
[ 11.099205] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 11.099207] ACPI: Power Button [PWRF]
[ 11.119198] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 11.124213] thermal LNXTHERM:00: registered as thermal_zone0
[ 11.124216] ACPI: Thermal Zone [CPUZ] (73 C)
[ 11.148528] thermal LNXTHERM:01: registered as thermal_zone1
[ 11.148530] ACPI: Thermal Zone [GFXZ] (0 C)
[ 11.164584] thermal LNXTHERM:02: registered as thermal_zone2
[ 11.164586] ACPI: Thermal Zone [EXTZ] (0 C)
[ 11.179726] thermal LNXTHERM:03: registered as thermal_zone3
[ 11.179729] ACPI: Thermal Zone [LOCZ] (0 C)
[ 11.194908] thermal LNXTHERM:04: registered as thermal_zone4
[ 11.194911] ACPI: Thermal Zone [BATZ] (26 C)
[ 11.194990] GHES: HEST is not enabled!
[ 11.195368] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 11.198324] Linux agpgart interface v0.103
[ 11.215500] ACPI: Battery Slot [BAT0] (battery present)
[ 11.292539] tpm_tis 00:06: 1.2 TPM (device-id 0x1A, rev-id 16)
[ 11.660561] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
[ 11.660607] tpm tpm0: TPM is disabled/deactivated (0x7)
[ 11.665150] loop: module loaded
[ 11.665415] libphy: Fixed MDIO Bus: probed
[ 11.665416] tun: Universal TUN/TAP device driver, 1.6
[ 11.665417] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 11.665547] PPP generic driver version 2.4.2
[ 11.665643] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 11.665646] ehci-pci: EHCI PCI platform driver
[ 11.665987] QUIRK: Enable AMD PLL fix
[ 11.666025] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 11.666031] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 11.666036] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 11.666047] ehci-pci 0000:00:12.2: debug port 1
[ 11.666098] ehci-pci 0000:00:12.2: irq 17, io mem 0xd684d000
[ 11.680641] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 11.680722] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 11.680724] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.680726] usb usb1: Product: EHCI Host Controller
[ 11.680727] usb usb1: Manufacturer: Linux 4.10.0-28-generic ehci_hcd
[ 11.680728] usb usb1: SerialNumber: 0000:00:12.2
[ 11.681036] hub 1-0:1.0: USB hub found
[ 11.681044] hub 1-0:1.0: 5 ports detected
[ 11.681726] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 11.681732] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 11.681737] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 11.681748] ehci-pci 0000:00:13.2: debug port 1
[ 11.681795] ehci-pci 0000:00:13.2: irq 17, io mem 0xd684b000
[ 11.696547] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 11.696628] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 11.696630] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.696632] usb usb2: Product: EHCI Host Controller
[ 11.696633] usb usb2: Manufacturer: Linux 4.10.0-28-generic ehci_hcd
[ 11.696634] usb usb2: SerialNumber: 0000:00:13.2
[ 11.696969] hub 2-0:1.0: USB hub found
[ 11.696976] hub 2-0:1.0: 5 ports detected
[ 11.697270] ehci-platform: EHCI generic platform driver
[ 11.697296] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 11.697301] ohci-pci: OHCI PCI platform driver
[ 11.697640] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 11.697648] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 11.697689] ohci-pci 0000:00:12.0: irq 18, io mem 0xd684e000
[ 11.760603] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 11.760606] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.760608] usb usb3: Product: OHCI PCI host controller
[ 11.760609] usb usb3: Manufacturer: Linux 4.10.0-28-generic ohci_hcd
[ 11.760610] usb usb3: SerialNumber: 0000:00:12.0
[ 11.760993] hub 3-0:1.0: USB hub found
[ 11.761033] hub 3-0:1.0: 5 ports detected
[ 11.761557] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 11.761565] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 11.761604] ohci-pci 0000:00:13.0: irq 18, io mem 0xd684c000
[ 11.824582] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 11.824585] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.824586] usb usb4: Product: OHCI PCI host controller
[ 11.824588] usb usb4: Manufacturer: Linux 4.10.0-28-generic ohci_hcd
[ 11.824589] usb usb4: SerialNumber: 0000:00:13.0
[ 11.824968] hub 4-0:1.0: USB hub found
[ 11.825009] hub 4-0:1.0: 5 ports detected
[ 11.825491] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 11.825502] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
[ 11.825551] ohci-pci 0000:00:14.5: irq 18, io mem 0xd684a000
[ 11.888618] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 11.888621] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.888622] usb usb5: Product: OHCI PCI host controller
[ 11.888624] usb usb5: Manufacturer: Linux 4.10.0-28-generic ohci_hcd
[ 11.888625] usb usb5: SerialNumber: 0000:00:14.5
[ 11.888910] hub 5-0:1.0: USB hub found
[ 11.888951] hub 5-0:1.0: 2 ports detected
[ 11.889220] ohci-platform: OHCI generic platform driver
[ 11.889242] uhci_hcd: USB Universal Host Controller Interface driver
[ 11.889544] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 11.889551] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
[ 11.889766] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
[ 11.889993] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 11.889994] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.889996] usb usb6: Product: xHCI Host Controller
[ 11.889997] usb usb6: Manufacturer: Linux 4.10.0-28-generic xhci-hcd
[ 11.889998] usb usb6: SerialNumber: 0000:00:10.0
[ 11.890329] hub 6-0:1.0: USB hub found
[ 11.890369] hub 6-0:1.0: 2 ports detected
[ 11.890568] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 11.890571] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 7
[ 11.893162] usb usb7: We don't know the algorithms for LPM for this host, disabling LPM.
[ 11.893185] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
[ 11.893186] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.893188] usb usb7: Product: xHCI Host Controller
[ 11.893189] usb usb7: Manufacturer: Linux 4.10.0-28-generic xhci-hcd
[ 11.893190] usb usb7: SerialNumber: 0000:00:10.0
[ 11.893496] hub 7-0:1.0: USB hub found
[ 11.893523] hub 7-0:1.0: 2 ports detected
[ 11.893783] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 11.895666] i8042: Detected active multiplexing controller, rev 1.1
[ 11.896499] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 11.896505] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 11.896546] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 11.896579] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 11.896612] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 11.896911] mousedev: PS/2 mouse device common for all mice
[ 11.897146] rtc_cmos 00:03: RTC can wake from S4
[ 11.897274] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 11.897311] rtc_cmos 00:03: alarms up to one month, 114 bytes nvram, hpet irqs
[ 11.897318] i2c /dev entries driver
[ 11.897391] device-mapper: uevent: version 1.0.3
[ 11.897477] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 11.897552] ledtrig-cpu: registered to indicate activity on CPUs
[ 11.898026] NET: Registered protocol family 10
[ 11.903523] Segment Routing with IPv6
[ 11.903551] NET: Registered protocol family 17
[ 11.903570] Key type dns_resolver registered
[ 11.904231] microcode: CPU0: patch_level=0x06003106
[ 11.904269] microcode: CPU1: patch_level=0x06003106
[ 11.904280] microcode: CPU2: patch_level=0x06003106
[ 11.904289] microcode: CPU3: patch_level=0x06003106
[ 11.904370] microcode: Microcode Update Driver: v2.2.
[ 11.904580] registered taskstats version 1
[ 11.904596] Loading compiled-in X.509 certificates
[ 11.907662] Loaded X.509 cert 'Build time autogenerated kernel key: 1dbff672f4e4d459849c8aa71c01089bd04bfcdd'
[ 11.907714] zswap: loaded using pool lzo/zbud
[ 11.921645] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 11.922789] Key type big_key registered
[ 11.922796] Key type trusted registered
[ 11.925696] Key type encrypted registered
[ 11.925702] AppArmor: AppArmor sha1 policy hashing enabled
[ 11.988565] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
[ 11.988612] ima: No TPM chip found, activating TPM-bypass! (rc=7)
[ 11.988653] evm: HMAC attrs: 0x1
[ 11.989182] Magic number: 6:959:434
[ 11.989507] rtc_cmos 00:03: setting system clock to 2018-02-15 14:26:18 UTC (1518704778)
[ 11.989836] acpi_cpufreq: overriding BIOS provided _PSD data
[ 11.990121] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 11.990121] EDD information not available.
[ 11.990178] PM: Hibernation image not present or could not be loaded.
[ 11.992718] Freeing unused kernel memory: 2228K
[ 11.992719] Write protecting the kernel read-only data: 14336k
[ 11.993463] Freeing unused kernel memory: 1164K
[ 11.994396] Freeing unused kernel memory: 272K
[ 12.005047] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 12.028549] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 12.028670] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 12.028686] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 12.028705] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 12.029466] random: udevadm: uninitialized urandom read (16 bytes read)
[ 12.029517] random: udevadm: uninitialized urandom read (16 bytes read)
[ 12.031818] random: udevadm: uninitialized urandom read (16 bytes read)
[ 12.031928] random: udevadm: uninitialized urandom read (16 bytes read)
[ 12.032005] random: udevadm: uninitialized urandom read (16 bytes read)
[ 12.032082] random: udevadm: uninitialized urandom read (16 bytes read)
[ 12.075065] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 12.075404] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
[ 12.080857] acpi device:00: registered as cooling_device4
[ 12.081041] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 12.094498] wmi: Mapper loaded
[ 12.101612] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 12.101628] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 12.105636] [drm] Initialized
[ 12.106112] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 35
[ 12.106320] ahci 0000:00:11.0: version 3.0
[ 12.106770] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 12.106774] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 12.107657] scsi host0: ahci
[ 12.107928] scsi host1: ahci
[ 12.108076] ata1: SATA max UDMA/133 abar m2048@0xd684f000 port 0xd684f100 irq 36
[ 12.108079] ata2: SATA max UDMA/133 abar m2048@0xd684f000 port 0xd684f180 irq 36
[ 12.108557] tsc: Refined TSC clocksource calibration: 1796.676 MHz
[ 12.108565] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19e5e568f3e, max_idle_ns: 440795221239 ns
[ 12.113595] r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xffff9ce80001b000, d0:bf:9c:0e:a5:b6, XID 10900800 IRQ 37
[ 12.113601] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 12.162043] [drm] radeon kernel modesetting enabled.
[ 12.166136] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 12.171796] Found CRAT image with size=1320
[ 12.171802] Parsing CRAT table with 1 nodes
[ 12.171804] Found CU entry in CRAT table with proximity_domain=0 caps=0
[ 12.171806] CU CPU: cores=4 id_base=16
[ 12.171807] Found CU entry in CRAT table with proximity_domain=0 caps=0
[ 12.171809] CU GPU: simds=32 id_base=-2147483648
[ 12.171810] Found memory entry in CRAT table with proximity_domain=0
[ 12.171811] Found cache entry in CRAT table with processor_id=16
[ 12.171812] Found cache entry in CRAT table with processor_id=16
[ 12.171814] Found cache entry in CRAT table with processor_id=16
[ 12.171815] Found cache entry in CRAT table with processor_id=17
[ 12.171816] Found cache entry in CRAT table with processor_id=18
[ 12.171817] Found cache entry in CRAT table with processor_id=18
[ 12.171818] Found cache entry in CRAT table with processor_id=18
[ 12.171819] Found cache entry in CRAT table with processor_id=19
[ 12.171820] Found TLB entry in CRAT table (not processing)
[ 12.171821] Found TLB entry in CRAT table (not processing)
[ 12.171822] Found TLB entry in CRAT table (not processing)
[ 12.171822] Found TLB entry in CRAT table (not processing)
[ 12.171823] Found TLB entry in CRAT table (not processing)
[ 12.171824] Found TLB entry in CRAT table (not processing)
[ 12.171825] Found TLB entry in CRAT table (not processing)
[ 12.171825] Found TLB entry in CRAT table (not processing)
[ 12.171826] Found TLB entry in CRAT table (not processing)
[ 12.171827] Found TLB entry in CRAT table (not processing)
[ 12.171827] Creating topology SYSFS entries
[ 12.171871] Finished initializing topology ret=0
[ 12.171896] kfd kfd: Initialized module
[ 12.173078] [drm] initializing kernel modesetting (KAVERI 0x1002:0x1318 0x103C:0x2234 0x00).
[ 12.173104] [drm] register mmio base: 0xD6800000
[ 12.173105] [drm] register mmio size: 262144
[ 12.173112] [drm] doorbell mmio base: 0xD0000000
[ 12.173113] [drm] doorbell mmio size: 8388608
[ 12.174501] ATOM BIOS: BR45464.001
[ 12.174550] [drm] Changing default dispclk from 496Mhz to 600Mhz
[ 12.174564] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 12.174567] radeon 0000:00:01.0: GTT: 2048M 0x0000000020000000 - 0x000000009FFFFFFF
[ 12.174572] [drm] Detected VRAM RAM=512M, BAR=256M
[ 12.174573] [drm] RAM width 128bits DDR
[ 12.174656] [TTM] Zone kernel: Available graphics memory: 1769396 kiB
[ 12.174658] [TTM] Initializing pool allocator
[ 12.174664] [TTM] Initializing DMA pool allocator
[ 12.174699] [drm] radeon: 512M of VRAM memory ready
[ 12.174700] [drm] radeon: 2048M of GTT memory ready.
[ 12.174709] [drm] Loading kaveri Microcode
[ 12.174898] [drm] Internal thermal controller without fan control
[ 12.176226] [drm] radeon: dpm initialized
[ 12.176486] [drm] Found UVD firmware Version: 1.55 Family ID: 9
[ 12.180217] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
[ 12.180236] [drm] GART: num cpu pages 524288, num gpu pages 524288
[ 12.196759] r8169 0000:01:00.0 enp1s0: renamed from eth0
[ 12.213485] [drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
[ 12.213695] radeon 0000:00:01.0: WB enabled
[ 12.213707] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8ab2b0615c00
[ 12.213711] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff8ab2b0615c04
[ 12.213714] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff8ab2b0615c08
[ 12.213716] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8ab2b0615c0c
[ 12.213719] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0xffff8ab2b0615c10
[ 12.214314] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x00000000000782b0 and cpu addr 0xffff9ce8014382b0
[ 12.214549] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18 and cpu addr 0xffff8ab2b0615c18
[ 12.214552] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c and cpu addr 0xffff8ab2b0615c1c
[ 12.214555] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 12.214556] [drm] Driver supports precise vblank timestamp query.
[ 12.214626] radeon 0000:00:01.0: radeon: using MSI.
[ 12.214664] [drm] radeon: irq initialized.
[ 12.216424] usb 6-1: new high-speed USB device number 2 using xhci_hcd
[ 12.216776] [drm] ring test on 0 succeeded in 4 usecs
[ 12.216876] [drm] ring test on 1 succeeded in 3 usecs
[ 12.216895] [drm] ring test on 2 succeeded in 3 usecs
[ 12.217080] [drm] ring test on 3 succeeded in 5 usecs
[ 12.217087] [drm] ring test on 4 succeeded in 4 usecs
[ 12.262797] [drm] ring test on 5 succeeded in 2 usecs
[ 12.272399] usb 5-2: new full-speed USB device number 2 using ohci-pci
[ 12.282666] [drm] UVD initialized successfully.
[ 12.324439] usb 3-3: new full-speed USB device number 2 using ohci-pci
[ 12.362438] usb 6-1: New USB device found, idVendor=0951, idProduct=1624
[ 12.362441] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 12.362444] usb 6-1: Product: DataTraveler G2
[ 12.362446] usb 6-1: Manufacturer: Kingston
[ 12.362449] usb 6-1: SerialNumber: 0014780F995FF990D5310934
[ 12.370932] usb-storage 6-1:1.0: USB Mass Storage device detected
[ 12.371257] scsi host2: usb-storage 6-1:1.0
[ 12.371461] usbcore: registered new interface driver usb-storage
[ 12.374480] usbcore: registered new interface driver uas
[ 12.392425] [drm] ring test on 6 succeeded in 16 usecs
[ 12.392437] [drm] ring test on 7 succeeded in 3 usecs
[ 12.392438] [drm] VCE initialized successfully.
[ 12.395078] [drm] ib test on ring 0 succeeded in 0 usecs
[ 12.457872] usb 5-2: New USB device found, idVendor=138a, idProduct=003f
[ 12.457877] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 12.457880] usb 5-2: SerialNumber: 00a0ae575996
[ 12.523769] usb 3-3: New USB device found, idVendor=0bda, idProduct=b001
[ 12.523773] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 12.523776] usb 3-3: Product: Bluetooth Radio
[ 12.523779] usb 3-3: Manufacturer: Realtek
[ 12.523781] usb 3-3: SerialNumber: 00e04c000001
[ 12.584553] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 12.584586] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 12.584728] ata1.00: ATA-11: TOSHIBA-TL100, SBFZ10.1, max UDMA/133
[ 12.584731] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 12.584913] random: fast init done
[ 12.585226] ata1.00: configured for UDMA/133
[ 12.585800] scsi 0:0:0:0: Direct-Access ATA TOSHIBA-TL100 10.1 PQ: 0 ANSI: 5
[ 12.589389] ata2.00: ATAPI: hp DVDRW DU8A6SH, DH61, max UDMA/133
[ 12.596966] ata2.00: configured for UDMA/133
[ 12.620934] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 12.621272] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 12.621318] sd 0:0:0:0: [sda] Write Protect is off
[ 12.621324] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 12.621446] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 12.622763] sda: sda1 sda2 sda3
[ 12.623774] sd 0:0:0:0: [sda] Attached SCSI disk
[ 12.624918] scsi 1:0:0:0: CD-ROM hp DVDRW DU8A6SH DH61 PQ: 0 ANSI: 5
[ 12.670756] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 12.670760] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 12.671284] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 12.671467] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 12.863506] psmouse serio3: synaptics: queried max coordinates: x [..5716], y [..4886]
[ 12.896742] psmouse serio3: synaptics: queried min coordinates: x [1220..], y [986..]
[ 12.900544] usb 1-5: new high-speed USB device number 3 using ehci-pci
[ 12.908595] [drm] ib test on ring 1 succeeded in 0 usecs
[ 12.957109] psmouse serio3: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00173/0x640000/0xa2400/0x0, board id: 2654, fw id: 1323623
[ 12.995897] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input11
[ 13.132654] clocksource: Switched to clocksource tsc
[ 13.132988] usb 1-5: New USB device found, idVendor=05c8, idProduct=0374
[ 13.132992] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 13.132995] usb 1-5: Product: HP HD Webcam
[ 13.132998] usb 1-5: Manufacturer: SunplusIT INC.
[ 13.390012] scsi 2:0:0:0: Direct-Access Kingston DataTraveler G2 1.00 PQ: 0 ANSI: 2
[ 13.390865] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 13.391067] sd 2:0:0:0: [sdb] 15646656 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 13.391277] sd 2:0:0:0: [sdb] Write Protect is off
[ 13.391281] sd 2:0:0:0: [sdb] Mode Sense: 16 24 09 51
[ 13.391475] sd 2:0:0:0: [sdb] Incomplete mode parameter data
[ 13.391534] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 13.394965] sdb: sdb1 sdb2 sdb4
[ 13.396400] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 13.424397] [drm] ib test on ring 2 succeeded in 0 usecs
[ 13.424475] [drm] ib test on ring 3 succeeded in 0 usecs
[ 13.424544] [drm] ib test on ring 4 succeeded in 0 usecs
[ 13.964764] [drm] ib test on ring 5 succeeded
[ 13.985624] [drm] ib test on ring 6 succeeded
[ 13.986468] [drm] ib test on ring 7 succeeded
[ 13.989965] [drm] radeon atom DIG backlight initialized
[ 13.989968] [drm] Radeon Display Connectors
[ 13.989970] [drm] Connector 0:
[ 13.989971] [drm] VGA-1
[ 13.989972] [drm] HPD2
[ 13.989975] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 13.989976] [drm] Encoders:
[ 13.989977] [drm] CRT1: INTERNAL_UNIPHY2
[ 13.989978] [drm] CRT1: NUTMEG
[ 13.989979] [drm] Connector 1:
[ 13.989980] [drm] HDMI-A-1
[ 13.989981] [drm] HPD3
[ 13.989983] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[ 13.989984] [drm] Encoders:
[ 13.989985] [drm] DFP1: INTERNAL_UNIPHY2
[ 13.989986] [drm] Connector 2:
[ 13.989987] [drm] eDP-1
[ 13.989988] [drm] HPD1
[ 13.989990] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 13.989990] [drm] Encoders:
[ 13.989992] [drm] LCD1: INTERNAL_UNIPHY
[ 14.994351] [drm] fb mappable at 0xC0722000
[ 14.994352] [drm] vram apper at 0xC0000000
[ 14.994353] [drm] size 4325376
[ 14.994354] [drm] fb depth is 24
[ 14.994355] [drm] pitch is 5632
[ 14.994673] fbcon: radeondrmfb (fb0) is primary device
[ 16.613647] Console: switching to colour frame buffer device 170x48
[ 16.617163] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 16.646721] kfd kfd: Allocated 3944480 bytes on gart for device(1002:1318)
[ 16.646839] kfd kfd: added device (1002:1318)
[ 16.646866] [drm] Initialized radeon 2.49.0 20080528 for 0000:00:01.0 on minor 0
[ 16.680875] [drm] amdgpu kernel modesetting enabled.
[ 17.169456] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 17.226938] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 17.476325] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 17.482082] ISO 9660 Extensions: RRIP_1991A
[ 17.765122] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 17.967375] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 17.968967] ISO 9660 Extensions: RRIP_1991A
[ 17.998433] aufs 4.x-rcN-20170206
[ 19.676545] random: crng init done
[ 20.795388] Adding 4198396k swap on /dev/sda2. Priority:-1 extents:1 across:4198396k SSFS
[ 32.727091] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 32.727417] systemd[1]: Detected architecture x86-64.
[ 32.727662] systemd[1]: Set hostname to <ubuntu-mate>.
[ 32.727961] systemd[1]: Initializing machine ID from random generator.
[ 33.012222] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 33.012333] systemd[1]: Reached target Encrypted Volumes.
[ 33.012611] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 33.012811] systemd[1]: Created slice User and Session Slice.
[ 33.012888] systemd[1]: Listening on LVM2 poll daemon socket.
[ 33.012964] systemd[1]: Listening on udev Control Socket.
[ 33.790787] systemd-journald[1050]: Received request to flush runtime journal from PID 1
[ 33.819022] lp: driver loaded but no devices found
[ 33.852146] ppdev: user-space parallel port driver
[ 34.211844] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 34.239514] Initializing HPQ6001 module
[ 34.239621] input: HP Wireless hotkeys as /devices/virtual/input/input13
[ 34.341905] hp_accel: laptop model unknown, using default axes configuration
[ 34.476652] lis3lv02d: 8 bits 3DC sensor found
[ 34.555614] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B06 (\_SB.PCI0.SMBS.SMBO) (20160930/utaddress-247)
[ 34.555624] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 34.852302] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[ 34.924413] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input14
[ 35.022003] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 35.022007] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 35.022010] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 35.022012] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 35.022014] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 35.022016] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
[ 35.022018] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 35.037479] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
[ 35.037598] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
[ 35.279726] AVX version of gcm_enc/dec engaged.
[ 35.279729] AES CTR mode by8 optimization enabled
[ 35.593455] rtl8723be: Using firmware rtlwifi/rtl8723befw.bin
[ 35.854711] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 35.855287] rtlwifi: rtlwifi: wireless switch is on
[ 35.901287] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input17
[ 36.121987] media: Linux media interface: v0.10
[ 36.456371] Linux video capture interface: v2.00
[ 36.852807] kvm: disabled by bios
[ 37.111279] Bluetooth: Core ver 2.22
[ 37.111315] NET: Registered protocol family 31
[ 37.111316] Bluetooth: HCI device and connection manager initialized
[ 37.111323] Bluetooth: HCI socket layer initialized
[ 37.111328] Bluetooth: L2CAP socket layer initialized
[ 37.111338] Bluetooth: SCO socket layer initialized
[ 37.135365] EDAC MC: Ver: 3.0.0
[ 37.149433] uvcvideo: Found UVC 1.00 device HP HD Webcam (05c8:0374)
[ 37.158299] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[ 37.158305] uvcvideo 1-5:1.0: Entity type for entity Extension 3 was not initialized!
[ 37.158308] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[ 37.158311] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[ 37.158486] input: HP HD Webcam as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input18
[ 37.158718] usbcore: registered new interface driver uvcvideo
[ 37.158720] USB Video Class driver (1.1.1)
[ 37.198305] MCE: In-kernel MCE decoding enabled.
[ 37.329944] EDAC amd64: DRAM ECC disabled.
[ 37.329947] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 37.377980] EDAC amd64: DRAM ECC disabled.
[ 37.377983] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 37.656181] usbcore: registered new interface driver btusb
[ 37.926384] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 37.926390] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_config.bin
[ 37.926890] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[ 37.926893] Bluetooth: hci0: Failed to load rtl_bt/rtl8723b_config.bin
[ 37.926899] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[ 38.029408] rtl8723be 0000:02:00.0 wlo1: renamed from wlan0
[ 38.108131] input: HP WMI hotkeys as /devices/virtual/input/input19
[ 38.134362] Bluetooth: hci0: rom_version status=0 version=1
[ 38.134376] Bluetooth: cfg_sz 0, total size 22496
[ 39.810726] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 39.810728] Bluetooth: BNEP filters: protocol multicast
[ 39.810735] Bluetooth: BNEP socket layer initialized
[ 41.227489] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 41.795357] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 41.803204] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 41.875744] r8169 0000:01:00.0 enp1s0: link down
[ 41.875843] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 42.213938] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 47.793499] Non-volatile memory driver v1.3
[ 53.232190] Bluetooth: RFCOMM TTY layer initialized
[ 53.232206] Bluetooth: RFCOMM socket layer initialized
[ 53.232218] Bluetooth: RFCOMM ver 1.11
[ 53.461759] usb 3-3: reset full-speed USB device number 2 using ohci-pci
[ 55.117804] Bluetooth: hci0 command 0x0c24 tx timeout
[ 57.133899] Bluetooth: hci0 command 0x0c52 tx timeout
[ 58.915958] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 58.961788] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 121.363256] wlo1: authenticate with a0:4f:d4:ed:d5:6d
[ 121.390057] wlo1: send auth to a0:4f:d4:ed:d5:6d (try 1/3)
[ 121.393498] wlo1: authenticated
[ 121.396351] wlo1: associate with a0:4f:d4:ed:d5:6d (try 1/3)
[ 121.402995] wlo1: RX AssocResp from a0:4f:d4:ed:d5:6d (capab=0x1411 status=0 aid=3)
[ 121.407163] wlo1: associated
[ 121.407185] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
|
|