Hallo,
ich habe ein neues Notebook, ein HP 17-ak062ng mit 4GB Arbeitsspeicher, 1 TB HDD, AMD A6 CPU (dualcore) und Radeon R4 Grafik. Nun habe ich nach einigen Ausprobieren (u. a. Debian Stretch) Lubuntu 17.10 installiert. Das läuft auch ganz stabil, nur die Akku-Anzeige bleibt die ganze Zeit bei 47 % stehen. Er lädt einfach nicht auf. Das Notebook ist auch ein bischen buggy was das Einschalten betrifft, es fährt manchmal nicht richtig hoch. Wenn man den Akku heraus nimmt fährt es hoch, auch hier ist der Power-Button etwas buggy. Nun wüsste ich gerne, ob die stehengebliebene Akku-Anzeige am Notebook liegt, oder ob es einen Bug bei Lubuntu gibt. Das wollte ich klären, bevor ich mich an den Support von HP wende. Ich sollte vielleicht erwähnen das eine Debian Stretch Installation auf dem Notebook eine einzige Katastrophe war. Der Befehl "dmesg" spuckte am laufenden Band Fehlermeldungen aus und das System fror ein. Das Dateisystem war danach beschädigt und die automatische Reperatur schlug fehl. Wie gesagt, im Gegensatz dazu läuft Lubuntu 17.10 ganz stabil.
lspci:
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1576 00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Device 1577 00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 98e4 (rev ea) 00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device 15b3 00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 157b 00:02.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 157c 00:02.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 157c 00:02.3 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 157c 00:03.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 157b 00:08.0 Encryption controller: Advanced Micro Devices, Inc. [AMD] Device 1578 00:09.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 157d 00:09.2 Audio device: Advanced Micro Devices, Inc. [AMD] Device 157a 00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 20) 00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 4b) 00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 49) 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 4b) 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11) 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 15b0 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 15b1 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 15b2 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 15b3 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 15b4 00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 15b5 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15) 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device d723
Das Netzteil wird in der Energieverwaltung als "line_power_ADP1" angezeigt. Der Akku als Modell "JC04041".
Edit: Hier ein Ausschnitt von dmesg:
[ 0.072625] ACPI: bus type PCI registered [ 0.072625] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.072625] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.072625] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.072625] PCI: Using configuration type 1 for base access [ 0.073241] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.073241] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.073241] ACPI: Added _OSI(Module Device) [ 0.073241] ACPI: Added _OSI(Processor Device) [ 0.073241] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.073241] ACPI: Added _OSI(Processor Aggregator Device) [ 0.073241] ACPI: Executed 1 blocks of module-level executable AML code [ 0.081824] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.084733] ACPI: EC: EC started [ 0.084733] ACPI: EC: interrupt blocked [ 0.110496] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as first EC [ 0.110499] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.110500] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions [ 0.110501] ACPI: Interpreter enabled [ 0.110524] ACPI: (supports S0 S3 S4 S5) [ 0.110525] ACPI: Using IOAPIC for interrupt routing [ 0.110666] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.110888] ACPI: Enabled 7 GPEs in block 00 to 1F [ 0.118119] ACPI: Power Resource [P0U2] (off) [ 0.118153] ACPI: Power Resource [P3U2] (off) [ 0.118484] ACPI: Power Resource [P0U3] (off) [ 0.118515] ACPI: Power Resource [P3U3] (off) [ 0.119690] ACPI: Power Resource [P0ST] (on) [ 0.119723] ACPI: Power Resource [P3ST] (on) [ 0.122507] ACPI: Power Resource [P0SD] (off) [ 0.122539] ACPI: Power Resource [P3SD] (off) [ 0.125112] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.125118] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.125309] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.125310] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.125325] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.125419] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cfbff]) [ 0.125573] PCI host bridge to bus 0000:00