Ich kann keinen Sound mehr hören. Unter Systemeinstellungen findet sich unter Tonausgabe nur eine interner digitaler Audioausgang. Könnte das das Problem sein? Wie kann ich dem Fehler auf die Spur kommen?
Viele Grüße Vettisov
Kein Sound
|
Anmeldungsdatum: Beiträge: 85 |
|
|
Anmeldungsdatum: Beiträge: 1431 Wohnort: Rheinland |
Was spuckt das System denn aus in Sachen Audio-Fehler-Beschreibung...? |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 85 |
Jetzt habe ich die Fehler Beschreibung angefügt. Wo sind Fehler zu erkennen und wie kann ich diese beheben? Viele Grüße, Vettisov vettisov@vettisov-MS-7369:~$ lsb_release -d
Description: Ubuntu 16.04.4 LTS
vettisov@vettisov-MS-7369:~$ uname -r
4.13.0-39-generic
vettisov@vettisov-MS-7369:~$ cat /proc/asound/cards
0 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xfe8f8000 irq 20
1 [HDMI ]: HDA-Intel - HDA ATI HDMI
HDA ATI HDMI at 0xfebec000 irq 31
vettisov@vettisov-MS-7369:~$ aplay -l
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 0: NVidia [HDA NVidia], Gerät 0: ALC888 Analog [ALC888 Analog]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 0: NVidia [HDA NVidia], Gerät 1: ALC888 Digital [ALC888 Digital]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 1: HDMI [HDA ATI HDMI], Gerät 3: HDMI 0 [HDMI 0]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
vettisov@vettisov-MS-7369:~$ aplay /usr/share/sounds/alsa/Noise.wav
Wiedergabe: WAVE '/usr/share/sounds/alsa/Noise.wav' : Signed 16 bit Little Endian, Rate: 48000 Hz, mono
vettisov@vettisov-MS-7369:~$ lspci -nnk | grep -iA2 audio
00:07.0 Audio device [0403]: NVIDIA Corporation MCP65 High Definition Audio [10de:044a] (rev a1)
Subsystem: Device [0888:10ec]
Kernel driver in use: snd_hda_intel
--
04:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] RV635 HDMI Audio [Radeon HD 3600 Series] [1002:aa20]
Subsystem: Micro-Star International Co., Ltd. [MSI] RV635 HDMI Audio [Radeon HD 3600 Series] [1462:aa20]
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
vettisov@vettisov-MS-7369:~$ ps -C esd
PID TTY TIME CMD
vettisov@vettisov-MS-7369:~$ ps -C arts
PID TTY TIME CMD
vettisov@vettisov-MS-7369:~$ ps -C pulseaudio
PID TTY TIME CMD
1863 ? 00:00:00 pulseaudio
vettisov@vettisov-MS-7369:~$ grep "^audio" /etc/group | grep "$USER" | wc -l
0
vettisov@vettisov-MS-7369:~$ dpkg -l | tr -s " " | grep " alsa-"
ii alsa-base 1.0.25+dfsg-0ubuntu5 all ALSA driver configuration files
ii alsa-utils 1.1.0-0ubuntu5 amd64 Utilities for configuring and using ALSA
vettisov@vettisov-MS-7369:~$ lsmod | grep "snd"
snd_hda_codec_realtek 98304 1
snd_hda_codec_generic 73728 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 49152 1
snd_hda_intel 40960 4
snd_hda_codec 126976 4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_core 81920 5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hwdep 20480 1 snd_hda_codec
snd_pcm 98304 4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
snd_rawmidi 32768 1 snd_seq_midi
snd_seq 65536 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 32768 2 snd_seq,snd_pcm
snd 81920 19 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_pcm
soundcore 16384 1 snd
vettisov@vettisov-MS-7369:~$ cat /proc/asound/cards
0 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xfe8f8000 irq 20
1 [HDMI ]: HDA-Intel - HDA ATI HDMI
HDA ATI HDMI at 0xfebec000 irq 31
vettisov@vettisov-MS-7369:~$ head -n 3 /proc/asound/card0/codec#0
Codec: Realtek ALC888
Address: 0
AFG Function Id: 0x1 (unsol 1)
vettisov@vettisov-MS-7369:~$ head -n 3 /proc/asound/card0/codec97#0/ac97#0-0
head: '/proc/asound/card0/codec97#0/ac97#0-0' kann nicht zum Lesen geöffnet werden: Datei oder Verzeichnis nicht gefunden
vettisov@vettisov-MS-7369:~$ head -n 3 /proc/asound/card0/codec97#0/ac97#0-0+regs
head: '/proc/asound/card0/codec97#0/ac97#0-0+regs' kann nicht zum Lesen geöffnet werden: Datei oder Verzeichnis nicht gefunden
vettisov@vettisov-MS-7369:~$ aplay -l
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 0: NVidia [HDA NVidia], Gerät 0: ALC888 Analog [ALC888 Analog]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 0: NVidia [HDA NVidia], Gerät 1: ALC888 Digital [ALC888 Digital]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 1: HDMI [HDA ATI HDMI], Gerät 3: HDMI 0 [HDMI 0]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
vettisov@vettisov-MS-7369:~$ aplay /usr/share/sounds/alsa/Noise.wav
Wiedergabe: WAVE '/usr/share/sounds/alsa/Noise.wav' : Signed 16 bit Little Endian, Rate: 48000 Hz, mono
vettisov@vettisov-MS-7369:~$ cat ~/.asoundrc
cat: /home/vettisov/.asoundrc: Datei oder Verzeichnis nicht gefunden
vettisov@vettisov-MS-7369:~$ cat /etc/asound.conf
cat: /etc/asound.conf: Datei oder Verzeichnis nicht gefunden
vettisov@vettisov-MS-7369:~$ cat ~/.asoundrc.asoundconf
cat: /home/vettisov/.asoundrc.asoundconf: Datei oder Verzeichnis nicht gefunden
vettisov@vettisov-MS-7369:~$ ps -C esd
PID TTY TIME CMD
vettisov@vettisov-MS-7369:~$ ps -C arts
PID TTY TIME CMD
vettisov@vettisov-MS-7369:~$ ps -C pulseaudio
PID TTY TIME CMD
1863 ? 00:00:00 pulseaudio
vettisov@vettisov-MS-7369:~$ dmesg
[ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x507 with crng_init=0
[ 0.000000] Linux version 4.13.0-39-generic (buildd@lcy01-amd64-024) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9)) #44~16.04.1-Ubuntu SMP Thu Apr 5 16:43:10 UTC 2018 (Ubuntu 4.13.0-39.44~16.04.1-generic 4.13.16)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-39-generic root=UUID=6933c7e3-da2c-4d9c-ac8f-4bd04fd4d515 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cffbffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cffc0000-0x00000000cffcdfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cffce000-0x00000000cffeffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cfff0000-0x00000000cfffdfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: MSI MS-7369/MS-7369, BIOS V2.6 03/11/2008
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back
[ 0.000000] 3 base 0100000000 mask FF00000000 write-back
[ 0.000000] 4 base 0200000000 mask FFE0000000 write-back
[ 0.000000] 5 base 0220000000 mask FFF0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000230000000 aka 8960M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcffc0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff93bec00ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff93bec0099000] 99000 size 24576
[ 0.000000] BRK [0x13092c000, 0x13092cfff] PGTABLE
[ 0.000000] BRK [0x13092d000, 0x13092dfff] PGTABLE
[ 0.000000] BRK [0x13092e000, 0x13092efff] PGTABLE
[ 0.000000] BRK [0x13092f000, 0x13092ffff] PGTABLE
[ 0.000000] BRK [0x130930000, 0x130930fff] PGTABLE
[ 0.000000] BRK [0x130931000, 0x130931fff] PGTABLE
[ 0.000000] BRK [0x130932000, 0x130932fff] PGTABLE
[ 0.000000] BRK [0x130933000, 0x130933fff] PGTABLE
[ 0.000000] BRK [0x130934000, 0x130934fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x321c0000-0x350d7fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F9810 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 0x00000000CFFC0000 000034 (v01 031108 RSDT1839 20080311 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x00000000CFFC0200 000084 (v01 031108 FACP1839 20080311 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x00000000CFFC0440 004B9F (v01 1ADKU 1ADKU004 00000004 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000CFFCE000 000040
[ 0.000000] ACPI: APIC 0x00000000CFFC0390 000070 (v01 031108 APIC1839 20080311 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x00000000CFFC0400 00003C (v01 031108 OEMMCFG 20080311 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x00000000CFFCE040 000071 (v01 031108 OEMB1839 20080311 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x22ffd1000-0x22fffbfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000022fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cffbffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000022fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fffffff]
[ 0.000000] On node 0 totalpages: 2096990
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13247 pages used for memmap
[ 0.000000] DMA32 zone: 847808 pages, LIFO batch:31
[ 0.000000] Normal zone: 19456 pages used for memmap
[ 0.000000] Normal zone: 1245184 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffc0000-0xcffcdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffce000-0xcffeffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfff0000-0xcfffdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfffe000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[ 0.000000] e820: [mem 0xcfffe000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] percpu: Embedded 45 pages/cpu @ffff93c0efc00000 s146584 r8192 d29544 u1048576
[ 0.000000] pcpu-alloc: s146584 r8192 d29544 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2064202
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-39-generic root=UUID=6933c7e3-da2c-4d9c-ac8f-4bd04fd4d515 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0xc226000000-0xc227ffffff] (32MB)
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
[ 0.000000] Memory: 8050616K/8387960K available (12300K kernel code, 2481K rwdata, 4008K rodata, 2368K init, 2372K bss, 337344K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] ftrace: allocating 37858 entries in 148 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2985.036 MHz processor
[ 0.004000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5970.07 BogoMIPS (lpj=11940144)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] ACPI: Core revision 20170531
[ 0.008492] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.008521] Security Framework initialized
[ 0.008523] Yama: becoming mindful.
[ 0.008543] AppArmor: AppArmor initialized
[ 0.012195] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.014054] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.014127] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.014187] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.014408] FEATURE SPEC_CTRL Not Present
[ 0.014409] FEATURE IBPB Not Present
[ 0.014410] CPU: Physical Processor ID: 0
[ 0.014411] CPU: Processor Core ID: 0
[ 0.014412] mce: CPU supports 5 MCE banks
[ 0.014417] LVT offset 0 assigned for vector 0xf9
[ 0.014419] process: using AMD E400 aware idle routine
[ 0.014421] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.014422] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[ 0.014424] Spectre V2 mitigation: LFENCE not serializing. Switching to generic retpoline
[ 0.014427] Spectre V2 mitigation: Mitigation: Full generic retpoline
[ 0.014428] Spectre V2 mitigation: Speculation control IBPB not-supported IBRS not-supported
[ 0.014429] Spectre V2 mitigation: Filling RSB on context switch
[ 0.014566] Freeing SMP alternatives memory: 36K
[ 0.015965] smpboot: Max logical packages: 1
[ 0.016501] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.060000] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ (family: 0xf, model: 0x43, stepping: 0x3)
[ 0.060000] Performance Events: AMD PMU driver.
[ 0.060000] ... version: 0
[ 0.060000] ... bit width: 48
[ 0.060000] ... generic registers: 4
[ 0.060000] ... value mask: 0000ffffffffffff
[ 0.060000] ... max period: 00007fffffffffff
[ 0.060000] ... fixed-purpose events: 0
[ 0.060000] ... event mask: 000000000000000f
[ 0.060000] Hierarchical SRCU implementation.
[ 0.060000] smp: Bringing up secondary CPUs ...
[ 0.060000] x86: Booting SMP configuration:
[ 0.060000] .... node #0, CPUs: #1
[ 0.060150] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.136033] smp: Brought up 1 node, 2 CPUs
[ 0.136033] smpboot: Total of 2 processors activated (11939.99 BogoMIPS)
[ 0.137015] devtmpfs: initialized
[ 0.137015] x86/mm: Memory block size: 128MB
[ 0.137015] evm: security.selinux
[ 0.137015] evm: security.SMACK64
[ 0.137015] evm: security.SMACK64EXEC
[ 0.137015] evm: security.SMACK64TRANSMUTE
[ 0.137015] evm: security.SMACK64MMAP
[ 0.137015] evm: security.ima
[ 0.137015] evm: security.capability
[ 0.137015] PM: Registering ACPI NVS region [mem 0xcffce000-0xcffeffff] (139264 bytes)
[ 0.137015] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.137015] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.137015] pinctrl core: initialized pinctrl subsystem
[ 0.137015] RTC time: 1:07:12, date: 04/30/18
[ 0.137015] NET: Registered protocol family 16
[ 0.137015] cpuidle: using governor ladder
[ 0.137015] cpuidle: using governor menu
[ 0.137015] PCCT header not found.
[ 0.137015] node 0 link 0: io port [1000, ffffff]
[ 0.137015] node 0 link 0: io port [2000, 2fff]
[ 0.137015] TOM: 00000000d0000000 aka 3328M
[ 0.137015] node 0 link 0: mmio [e0000000, efffffff]
[ 0.137015] node 0 link 0: mmio [a0000, bffff]
[ 0.137015] node 0 link 0: mmio [d0000000, fe0bffff]
[ 0.137015] TOM2: 0000000230000000 aka 8960M
[ 0.137015] bus: [bus 00-ff] on node 0 link 0
[ 0.137015] bus: 00 [io 0x0000-0xffff]
[ 0.137015] bus: 00 [mem 0xd0000000-0xffffffff]
[ 0.137015] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.137015] bus: 00 [mem 0x230000000-0xfcffffffff]
[ 0.137015] ACPI: bus type PCI registered
[ 0.137015] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.137015] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.137015] PCI: not using MMCONFIG
[ 0.137015] PCI: Using configuration type 1 for base access
[ 0.137015] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.137015] mtrr: probably your BIOS does not setup all CPUs.
[ 0.137015] mtrr: corrected configuration.
[ 0.140423] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.140423] ACPI: Added _OSI(Module Device)
[ 0.140423] ACPI: Added _OSI(Processor Device)
[ 0.140423] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.140423] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.140423] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.142525] ACPI: Interpreter enabled
[ 0.142541] ACPI: (supports S0 S1 S4 S5)
[ 0.142542] ACPI: Using IOAPIC for interrupt routing
[ 0.142569] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.144301] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.144317] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.144617] ACPI: Enabled 8 GPEs in block 00 to 1F
[ 0.151713] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.151719] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.151927] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.152120] PCI host bridge to bus 0000:00
[ 0.152123] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.152124] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.152126] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.152127] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[ 0.152129] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff window]
[ 0.152130] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
[ 0.152132] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.152149] pci 0000:00:00.0: [10de:0444] type 00 class 0x050000
[ 0.152354] pci 0000:00:01.0: [10de:0441] type 00 class 0x060100
[ 0.152362] pci 0000:00:01.0: reg 0x10: [io 0x2f00-0x2fff]
[ 0.152441] pci 0000:00:01.1: [10de:0446] type 00 class 0x0c0500
[ 0.152451] pci 0000:00:01.1: reg 0x10: [io 0x2900-0x293f]
[ 0.152464] pci 0000:00:01.1: reg 0x20: [io 0x2d00-0x2d3f]
[ 0.152468] pci 0000:00:01.1: reg 0x24: [io 0x2e00-0x2e3f]
[ 0.152492] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.152556] pci 0000:00:01.2: [10de:0445] type 00 class 0x050000
[ 0.152632] pci 0000:00:02.0: [10de:0454] type 00 class 0x0c0310
[ 0.152641] pci 0000:00:02.0: reg 0x10: [mem 0xfe8ff000-0xfe8fffff]
[ 0.152673] pci 0000:00:02.0: supports D1 D2
[ 0.152674] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.152734] pci 0000:00:02.1: [10de:0455] type 00 class 0x0c0320
[ 0.152744] pci 0000:00:02.1: reg 0x10: [mem 0xfe8fec00-0xfe8fecff]
[ 0.152779] pci 0000:00:02.1: supports D1 D2
[ 0.152780] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.152850] pci 0000:00:07.0: [10de:044a] type 00 class 0x040300
[ 0.152860] pci 0000:00:07.0: reg 0x10: [mem 0xfe8f8000-0xfe8fbfff]
[ 0.152896] pci 0000:00:07.0: PME# supported from D3hot D3cold
[ 0.152963] pci 0000:00:08.0: [10de:0449] type 01 class 0x060401
[ 0.153050] pci 0000:00:09.0: [10de:0448] type 00 class 0x01018a
[ 0.153070] pci 0000:00:09.0: reg 0x20: [io 0xffa0-0xffaf]
[ 0.153079] pci 0000:00:09.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.153080] pci 0000:00:09.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.153081] pci 0000:00:09.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.153082] pci 0000:00:09.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.153149] pci 0000:00:0a.0: [10de:045d] type 00 class 0x010185
[ 0.153156] pci 0000:00:0a.0: reg 0x10: [io 0x0f80-0x0f87]
[ 0.153159] pci 0000:00:0a.0: reg 0x14: [io 0x0f00-0x0f03]
[ 0.153162] pci 0000:00:0a.0: reg 0x18: [io 0x0e80-0x0e87]
[ 0.153165] pci 0000:00:0a.0: reg 0x1c: [io 0x0e00-0x0e03]
[ 0.153168] pci 0000:00:0a.0: reg 0x20: [io 0xa800-0xa80f]
[ 0.153172] pci 0000:00:0a.0: reg 0x24: [mem 0xfe8fc000-0xfe8fdfff]
[ 0.153246] pci 0000:00:0b.0: [10de:045b] type 01 class 0x060400
[ 0.153272] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.153339] pci 0000:00:0c.0: [10de:045a] type 01 class 0x060400
[ 0.153365] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.153432] pci 0000:00:0d.0: [10de:0458] type 01 class 0x060400
[ 0.153457] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.153528] pci 0000:00:0e.0: [10de:0459] type 01 class 0x060400
[ 0.153552] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.153625] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.153686] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.153745] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.153804] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.153907] pci 0000:01:08.0: [13d0:2103] type 00 class 0x028000
[ 0.153919] pci 0000:01:08.0: reg 0x10: [mem 0xfe9f0000-0xfe9fffff]
[ 0.153926] pci 0000:01:08.0: reg 0x14: [io 0xcc00-0xcc1f]
[ 0.153998] pci 0000:01:09.0: [168c:0023] type 00 class 0x028000
[ 0.154013] pci 0000:01:09.0: reg 0x10: [mem 0xfe9e0000-0xfe9effff]
[ 0.154107] pci 0000:01:0a.0: [1106:3038] type 00 class 0x0c0300
[ 0.154139] pci 0000:01:0a.0: reg 0x20: [io 0xc880-0xc89f]
[ 0.154169] pci 0000:01:0a.0: supports D1 D2
[ 0.154170] pci 0000:01:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.154214] pci 0000:01:0a.1: [1106:3038] type 00 class 0x0c0300
[ 0.154247] pci 0000:01:0a.1: reg 0x20: [io 0xc800-0xc81f]
[ 0.154277] pci 0000:01:0a.1: supports D1 D2
[ 0.154278] pci 0000:01:0a.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.154324] pci 0000:01:0a.2: [1106:3104] type 00 class 0x0c0320
[ 0.154338] pci 0000:01:0a.2: reg 0x10: [mem 0xfe9dfc00-0xfe9dfcff]
[ 0.154387] pci 0000:01:0a.2: supports D1 D2
[ 0.154388] pci 0000:01:0a.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.154433] pci 0000:01:0a.3: [1106:3044] type 00 class 0x0c0010
[ 0.154447] pci 0000:01:0a.3: reg 0x10: [mem 0xfe9df000-0xfe9df7ff]
[ 0.154454] pci 0000:01:0a.3: reg 0x14: [io 0xc480-0xc4ff]
[ 0.154501] pci 0000:01:0a.3: supports D2
[ 0.154502] pci 0000:01:0a.3: PME# supported from D2 D3hot D3cold
[ 0.154563] pci 0000:00:08.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.154565] pci 0000:00:08.0: bridge window [io 0xc000-0xcfff]
[ 0.154567] pci 0000:00:08.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.154570] pci 0000:00:08.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.154571] pci 0000:00:08.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.154575] pci 0000:00:08.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.154576] pci 0000:00:08.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[ 0.154578] pci 0000:00:08.0: bridge window [mem 0xd0000000-0xdfffffff window] (subtractive decode)
[ 0.154579] pci 0000:00:08.0: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
[ 0.154608] pci 0000:00:0b.0: PCI bridge to [bus 02]
[ 0.154651] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.154672] pci 0000:03:00.0: reg 0x10: [io 0xd800-0xd8ff]
[ 0.154691] pci 0000:03:00.0: reg 0x18: [mem 0xfeaff000-0xfeafffff 64bit]
[ 0.154714] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.154777] pci 0000:03:00.0: supports D1 D2
[ 0.154778] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.154840] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.154847] pci 0000:00:0c.0: PCI bridge to [bus 03]
[ 0.154849] pci 0000:00:0c.0: bridge window [io 0xd000-0xdfff]
[ 0.154851] pci 0000:00:0c.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.154883] pci 0000:04:00.0: [1002:9598] type 00 class 0x030000
[ 0.154898] pci 0000:04:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.154905] pci 0000:04:00.0: reg 0x18: [mem 0xfebf0000-0xfebfffff 64bit]
[ 0.154910] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.154919] pci 0000:04:00.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref]
[ 0.154947] pci 0000:04:00.0: supports D1 D2
[ 0.154992] pci 0000:04:00.1: [1002:aa20] type 00 class 0x040300
[ 0.155006] pci 0000:04:00.1: reg 0x10: [mem 0xfebec000-0xfebeffff 64bit]
[ 0.155052] pci 0000:04:00.1: supports D1 D2
[ 0.164012] pci 0000:00:0d.0: PCI bridge to [bus 04]
[ 0.164014] pci 0000:00:0d.0: bridge window [io 0xe000-0xefff]
[ 0.164016] pci 0000:00:0d.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.164018] pci 0000:00:0d.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.164044] pci 0000:00:0e.0: PCI bridge to [bus 05]
[ 0.164711] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10
[ 0.164816] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10
[ 0.164920] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *11
[ 0.165023] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *10
[ 0.165126] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *10
[ 0.165227] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[ 0.165329] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 0.165433] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
[ 0.165537] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
[ 0.165640] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[ 0.165742] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[ 0.165845] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
[ 0.165949] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[ 0.166050] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.166154] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[ 0.166266] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.166368] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled.
[ 0.166470] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled.
[ 0.166802] SCSI subsystem initialized
[ 0.166848] libata version 3.00 loaded.
[ 0.166848] pci 0000:04:00.0: vgaarb: setting as boot VGA device
[ 0.166848] pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.166848] pci 0000:04:00.0: vgaarb: bridge control possible
[ 0.166848] vgaarb: loaded
[ 0.166848] ACPI: bus type USB registered
[ 0.166848] usbcore: registered new interface driver usbfs
[ 0.166848] usbcore: registered new interface driver hub
[ 0.166848] usbcore: registered new device driver usb
[ 0.166848] EDAC MC: Ver: 3.0.0
[ 0.166848] PCI: Using ACPI for IRQ routing
[ 0.173030] PCI: pci_cache_line_size set to 64 bytes
[ 0.173073] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.173075] e820: reserve RAM buffer [mem 0xcffc0000-0xcfffffff]
[ 0.173174] NetLabel: Initializing
[ 0.173175] NetLabel: domain hash size = 128
[ 0.173175] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.173192] NetLabel: unlabeled traffic allowed by default
[ 0.173212] clocksource: Switched to clocksource refined-jiffies
[ 0.188137] VFS: Disk quotas dquot_6.6.0
[ 0.188160] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.188283] AppArmor: AppArmor Filesystem Enabled
[ 0.188340] pnp: PnP ACPI init
[ 0.188610] pnp 00:00: [dma 0 disabled]
[ 0.188668] pnp 00:00: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.188983] pnp 00:01: [dma 2]
[ 0.189025] pnp 00:01: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.189274] pnp 00:02: [dma 0 disabled]
[ 0.189369] pnp 00:02: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.189734] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.189735] system 00:03: [io 0x0800-0x080f] has been reserved
[ 0.189737] system 00:03: [io 0x2000-0x207f] has been reserved
[ 0.189739] system 00:03: [io 0x2080-0x20ff] has been reserved
[ 0.189741] system 00:03: [io 0x2400-0x247f] has been reserved
[ 0.189742] system 00:03: [io 0x2480-0x24ff] has been reserved
[ 0.189744] system 00:03: [io 0x2800-0x287f] has been reserved
[ 0.189746] system 00:03: [io 0x2880-0x28ff] has been reserved
[ 0.189747] system 00:03: [io 0x2c00-0x2c7f] has been reserved
[ 0.189749] system 00:03: [io 0x2c80-0x2cff] has been reserved
[ 0.189751] system 00:03: [mem 0x000d0000-0x000d3fff window] could not be reserved
[ 0.189753] system 00:03: [mem 0x000d4000-0x000d7fff window] has been reserved
[ 0.189755] system 00:03: [mem 0x000de000-0x000dffff window] has been reserved
[ 0.189757] system 00:03: [mem 0xfec80000-0x1fd93ffff] could not be reserved
[ 0.189759] system 00:03: [mem 0xfee01000-0xfeefffff] has been reserved
[ 0.189762] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.189828] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.189938] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.189940] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.189943] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.190085] system 00:06: [io 0x0a00-0x0a0f] has been reserved
[ 0.190087] system 00:06: [io 0x0a10-0x0a1f] has been reserved
[ 0.190089] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.190164] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.190167] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.190323] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.190325] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.190326] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.190328] system 00:08: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.190330] system 00:08: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.190333] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.190590] pnp: PnP ACPI: found 9 devices
[ 0.196907] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.196920] clocksource: Switched to clocksource acpi_pm
[ 0.196944] pci 0000:00:08.0: PCI bridge to [bus 01]
[ 0.196946] pci 0000:00:08.0: bridge window [io 0xc000-0xcfff]
[ 0.196949] pci 0000:00:08.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.196952] pci 0000:00:0b.0: PCI bridge to [bus 02]
[ 0.196959] pci 0000:03:00.0: BAR 6: assigned [mem 0xfea00000-0xfea1ffff pref]
[ 0.196961] pci 0000:00:0c.0: PCI bridge to [bus 03]
[ 0.196963] pci 0000:00:0c.0: bridge window [io 0xd000-0xdfff]
[ 0.196964] pci 0000:00:0c.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.196968] pci 0000:00:0d.0: PCI bridge to [bus 04]
[ 0.196969] pci 0000:00:0d.0: bridge window [io 0xe000-0xefff]
[ 0.196971] pci 0000:00:0d.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.196973] pci 0000:00:0d.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.196975] pci 0000:00:0e.0: PCI bridge to [bus 05]
[ 0.196980] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.196981] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.196983] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.196984] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.196986] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff window]
[ 0.196987] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window]
[ 0.196988] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.196989] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.196991] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
[ 0.196992] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
[ 0.196993] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.196995] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.196996] pci_bus 0000:01: resource 8 [mem 0xd0000000-0xdfffffff window]
[ 0.196997] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff window]
[ 0.196999] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.197000] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.197002] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.197003] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.197004] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.197067] NET: Registered protocol family 2
[ 0.197247] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.197505] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.197918] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.197997] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.198058] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.198172] NET: Registered protocol family 1
[ 0.198499] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 0.276304] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 0.276423] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.276464] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.276510] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.276556] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.276604] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.276654] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.276706] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.276915] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19
[ 0.277165] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 18
[ 0.277411] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 17
[ 0.277481] pci 0000:04:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.277485] PCI: CLS 64 bytes, default 64
[ 0.277539] Unpacking initramfs...
[ 1.068688] Freeing initrd memory: 48224K
[ 1.069349] PCI-DMA: Disabling AGP.
[ 1.069415] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 1.069416] PCI-DMA: using GART IOMMU.
[ 1.069418] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.072090] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b070d79ef7, max_idle_ns: 440795265636 ns
[ 1.072143] Scanning for low memory corruption every 60 seconds
[ 1.072450] audit: initializing netlink subsys (disabled)
[ 1.072541] audit: type=2000 audit(1525050433.072:1): state=initialized audit_enabled=0 res=1
[ 1.072809] Initialise system trusted keyrings
[ 1.072821] Key type blacklist registered
[ 1.072890] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 1.074724] zbud: loaded
[ 1.075313] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.075547] fuse init (API version 7.26)
[ 1.077679] Key type asymmetric registered
[ 1.077680] Asymmetric key parser 'x509' registered
[ 1.077726] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.077775] io scheduler noop registered
[ 1.077775] io scheduler deadline registered
[ 1.077811] io scheduler cfq registered (default)
[ 1.078295] pcieport 0000:00:0b.0: Signaling PME with IRQ 24
[ 1.078308] pcieport 0000:00:0c.0: Signaling PME with IRQ 25
[ 1.078322] pcieport 0000:00:0d.0: Signaling PME with IRQ 26
[ 1.078348] pcieport 0000:00:0e.0: Signaling PME with IRQ 27
[ 1.078425] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 1.078425] vesafb: scrolling: redraw
[ 1.078427] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 1.078439] vesafb: framebuffer at 0xd0000000, mapped to 0xffffb5ea81800000, using 5120k, total 5120k
[ 1.078563] Console: switching to colour frame buffer device 160x64
[ 1.078590] fb0: VESA VGA frame buffer device
[ 1.078682] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.078717] ACPI: Power Button [PWRB]
[ 1.078761] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.078786] ACPI: Power Button [PWRF]
[ 1.078948] GHES: HEST is not enabled!
[ 1.079034] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.099469] 00:00: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.101146] Linux agpgart interface v0.103
[ 1.102744] loop: module loaded
[ 1.103003] libphy: Fixed MDIO Bus: probed
[ 1.103004] tun: Universal TUN/TAP device driver, 1.6
[ 1.103043] PPP generic driver version 2.4.2
[ 1.103095] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.103098] ehci-pci: EHCI PCI platform driver
[ 1.103251] ehci-pci 0000:00:02.1: EHCI Host Controller
[ 1.103258] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 1.103266] ehci-pci 0000:00:02.1: debug port 1
[ 1.103298] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[ 1.103318] ehci-pci 0000:00:02.1: irq 22, io mem 0xfe8fec00
[ 1.116026] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 1.116075] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.116077] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.116078] usb usb1: Product: EHCI Host Controller
[ 1.116079] usb usb1: Manufacturer: Linux 4.13.0-39-generic ehci_hcd
[ 1.116081] usb usb1: SerialNumber: 0000:00:02.1
[ 1.116216] hub 1-0:1.0: USB hub found
[ 1.116224] hub 1-0:1.0: 10 ports detected
[ 1.116515] ehci-pci 0000:01:0a.2: EHCI Host Controller
[ 1.116519] ehci-pci 0000:01:0a.2: new USB bus registered, assigned bus number 2
[ 1.116557] ehci-pci 0000:01:0a.2: irq 17, io mem 0xfe9dfc00
[ 1.132026] ehci-pci 0000:01:0a.2: USB 2.0 started, EHCI 1.00
[ 1.132056] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.132058] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.132059] usb usb2: Product: EHCI Host Controller
[ 1.132060] usb usb2: Manufacturer: Linux 4.13.0-39-generic ehci_hcd
[ 1.132062] usb usb2: SerialNumber: 0000:01:0a.2
[ 1.132164] hub 2-0:1.0: USB hub found
[ 1.132170] hub 2-0:1.0: 4 ports detected
[ 1.132285] ehci-platform: EHCI generic platform driver
[ 1.132293] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.132296] ohci-pci: OHCI PCI platform driver
[ 1.132389] ohci-pci 0000:00:02.0: OHCI PCI host controller
[ 1.132394] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 3
[ 1.132423] ohci-pci 0000:00:02.0: irq 23, io mem 0xfe8ff000
[ 1.194053] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.194054] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.194055] usb usb3: Product: OHCI PCI host controller
[ 1.194057] usb usb3: Manufacturer: Linux 4.13.0-39-generic ohci_hcd
[ 1.194058] usb usb3: SerialNumber: 0000:00:02.0
[ 1.194162] hub 3-0:1.0: USB hub found
[ 1.194169] hub 3-0:1.0: 10 ports detected
[ 1.194358] ohci-platform: OHCI generic platform driver
[ 1.194366] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.194447] uhci_hcd 0000:01:0a.0: UHCI Host Controller
[ 1.194452] uhci_hcd 0000:01:0a.0: new USB bus registered, assigned bus number 4
[ 1.194456] uhci_hcd 0000:01:0a.0: detected 2 ports
[ 1.194481] uhci_hcd 0000:01:0a.0: irq 19, io base 0x0000c880
[ 1.194524] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.194525] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.194527] usb usb4: Product: UHCI Host Controller
[ 1.194528] usb usb4: Manufacturer: Linux 4.13.0-39-generic uhci_hcd
[ 1.194529] usb usb4: SerialNumber: 0000:01:0a.0
[ 1.194628] hub 4-0:1.0: USB hub found
[ 1.194633] hub 4-0:1.0: 2 ports detected
[ 1.194789] uhci_hcd 0000:01:0a.1: UHCI Host Controller
[ 1.194794] uhci_hcd 0000:01:0a.1: new USB bus registered, assigned bus number 5
[ 1.194799] uhci_hcd 0000:01:0a.1: detected 2 ports
[ 1.194823] uhci_hcd 0000:01:0a.1: irq 18, io base 0x0000c800
[ 1.194864] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.194866] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.194867] usb usb5: Product: UHCI Host Controller
[ 1.194868] usb usb5: Manufacturer: Linux 4.13.0-39-generic uhci_hcd
[ 1.194870] usb usb5: SerialNumber: 0000:01:0a.1
[ 1.194975] hub 5-0:1.0: USB hub found
[ 1.194980] hub 5-0:1.0: 2 ports detected
[ 1.195105] i8042: PNP: No PS/2 controller found.
[ 1.195106] i8042: Probing ports directly.
[ 1.198159] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.198163] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.198315] mousedev: PS/2 mouse device common for all mice
[ 1.198479] rtc_cmos 00:04: RTC can wake from S4
[ 1.198632] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.198665] rtc_cmos 00:04: alarms up to one year, y3k, 114 bytes nvram
[ 1.198671] i2c /dev entries driver
[ 1.198726] device-mapper: uevent: version 1.0.3
[ 1.198805] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 1.198832] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.199266] NET: Registered protocol family 10
[ 1.204220] Segment Routing with IPv6
[ 1.204243] NET: Registered protocol family 17
[ 1.204252] Key type dns_resolver registered
[ 1.204462] RAS: Correctable Errors collector initialized.
[ 1.204640] registered taskstats version 1
[ 1.204650] Loading compiled-in X.509 certificates
[ 1.207923] Loaded X.509 cert 'Build time autogenerated kernel key: 7960992d504579530bf240371c576177395d32e2'
[ 1.207940] zswap: loaded using pool lzo/zbud
[ 1.212631] Key type big_key registered
[ 1.212636] Key type trusted registered
[ 1.214858] Key type encrypted registered
[ 1.214862] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.214865] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.214886] evm: HMAC attrs: 0x1
[ 1.215178] Magic number: 14:409:105
[ 1.215310] rtc_cmos 00:04: setting system clock to 2018-04-30 01:07:13 UTC (1525050433)
[ 1.215428] powernow_k8: [Firmware Bug]: No compatible ACPI _PSS objects found.
[Firmware Bug]: First, make sure Cool'N'Quiet is enabled in the BIOS.
[Firmware Bug]: If that doesn't help, try upgrading your BIOS.
[ 1.215454] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.215454] EDD information not available.
[ 1.215490] PM: Hibernation image not present or could not be loaded.
[ 1.219109] Freeing unused kernel memory: 2368K
[ 1.219111] Write protecting the kernel read-only data: 18432k
[ 1.220211] Freeing unused kernel memory: 2024K
[ 1.220849] Freeing unused kernel memory: 88K
[ 1.223471] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.302777] Floppy drive(s): fd0 is 1.44M
[ 1.325866] FDC 0 is a post-1991 82077
[ 1.331491] pata_amd 0000:00:09.0: version 0.4.1
[ 1.336090] scsi host0: pata_amd
[ 1.336447] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.336680] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 16
[ 1.337030] r8169 0000:03:00.0 eth0: RTL8168b/8111b at 0xffffb5ea80c81000, 00:1d:92:e0:a3:c5, XID 18000000 IRQ 28
[ 1.337032] r8169 0000:03:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 1.338947] scsi host1: pata_amd
[ 1.338998] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.339000] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.340610] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[ 1.342638] ahci 0000:00:0a.0: version 3.0
[ 1.342737] ahci 0000:00:0a.0: controller can't do PMP, turning off CAP_PMP
[ 1.342797] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[ 1.342799] ahci 0000:00:0a.0: flags: 64bit ncq sntf pm led clo pio ccc
[ 1.346375] scsi host2: ahci
[ 1.350192] scsi host3: ahci
[ 1.354244] scsi host4: ahci
[ 1.358319] scsi host5: ahci
[ 1.358387] ata3: SATA max UDMA/133 abar m8192@0xfe8fc000 port 0xfe8fc100 irq 29
[ 1.358389] ata4: SATA max UDMA/133 abar m8192@0xfe8fc000 port 0xfe8fc180 irq 29
[ 1.358390] ata5: SATA max UDMA/133 abar m8192@0xfe8fc000 port 0xfe8fc200 irq 29
[ 1.358391] ata6: SATA max UDMA/133 abar m8192@0xfe8fc000 port 0xfe8fc280 irq 29
[ 1.376692] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 1.404093] firewire_ohci 0000:01:0a.3: added OHCI v1.0 device as card 0, 4 IR + 8 IT contexts, quirks 0x41
[ 1.407473] [drm] radeon kernel modesetting enabled.
[ 1.410119] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.410120] AMD IOMMUv2 functionality not available on this system
[ 1.413774] CRAT table not found
[ 1.413775] Finished initializing topology ret=0
[ 1.413787] kfd kfd: Initialized module
[ 1.414008] checking generic (d0000000 500000) vs hw (d0000000 10000000)
[ 1.414009] fb: switching to radeondrmfb from VESA VGA
[ 1.414045] Console: switching to colour dummy device 80x25
[ 1.414381] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19
[ 1.414500] [drm] initializing kernel modesetting (RV635 0x1002:0x9598 0x1462:0x1260 0x00).
[ 1.415003] ATOM BIOS: 113
[ 1.415025] radeon 0000:04:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 1.415027] radeon 0000:04:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 1.415030] [drm] Detected VRAM RAM=512M, BAR=256M
[ 1.415031] [drm] RAM width 128bits DDR
[ 1.415090] [TTM] Zone kernel: Available graphics memory: 4084654 kiB
[ 1.415090] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.415091] [TTM] Initializing pool allocator
[ 1.415095] [TTM] Initializing DMA pool allocator
[ 1.415118] [drm] radeon: 512M of VRAM memory ready
[ 1.415119] [drm] radeon: 512M of GTT memory ready.
[ 1.415126] [drm] Loading RV635 Microcode
[ 1.415211] [drm] radeon: power management initialized
[ 1.415282] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 1.441973] [drm] PCIE GART of 512M enabled (table at 0x0000000000142000).
[ 1.442249] radeon 0000:04:00.0: WB enabled
[ 1.442251] radeon 0000:04:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff93c0dbfb1c00
[ 1.442605] radeon 0000:04:00.0: fence driver on ring 5 use gpu addr 0x00000000000521d0 and cpu addr 0xffffb5ea814121d0
[ 1.442607] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.442608] [drm] Driver supports precise vblank timestamp query.
[ 1.442609] radeon 0000:04:00.0: radeon: MSI limited to 32-bit
[ 1.442657] radeon 0000:04:00.0: radeon: using MSI.
[ 1.442933] [drm] radeon: irq initialized.
[ 1.448026] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.464022] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.477726] [drm] ring test on 0 succeeded in 0 usecs
[ 1.496425] ata1.00: ATAPI: SAMSUNG DVD-ROM SD-616F, F101, max UDMA/33
[ 1.496432] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
[ 1.498926] ata1.00: configured for UDMA/33
[ 1.499544] scsi 0:0:0:0: CD-ROM SAMSUNG DVD-ROM SD-616F F101 PQ: 0 ANSI: 5
[ 1.524779] sr 0:0:0:0: [sr0] scsi3-mmc drive: 1x/48x cd/rw xa/form2 cdda tray
[ 1.524780] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.524899] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.525007] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.525061] ata2: port disabled--ignoring
[ 1.603089] usb 1-1: New USB device found, idVendor=04b8, idProduct=011b
[ 1.603091] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.603093] usb 1-1: Product: EPSON Scanner
[ 1.603094] usb 1-1: Manufacturer: EPSON
[ 1.613053] usb 2-1: New USB device found, idVendor=1058, idProduct=1003
[ 1.613055] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.613057] usb 2-1: Product: External HDD
[ 1.613058] usb 2-1: Manufacturer: Western Digital
[ 1.613059] usb 2-1: SerialNumber: 57442D574D41565531333433383034
[ 1.652471] [drm] ring test on 5 succeeded in 1 usecs
[ 1.652478] [drm] UVD initialized successfully.
[ 1.653098] [drm] ib test on ring 0 succeeded in 0 usecs
[ 1.670357] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.670562] ata3.00: ATAPI: ASUS DRW-24B1ST, 1.01, max UDMA/100
[ 1.671221] ata3.00: configured for UDMA/100
[ 1.673210] scsi 2:0:0:0: CD-ROM ASUS DRW-24B1ST 1.01 PQ: 0 ANSI: 5
[ 1.674632] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.679689] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.682436] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.684027] ata5.00: supports DRM functions and may not be fully accessible
[ 1.684746] ata5.00: disabling queued TRIM support
[ 1.684747] ata5.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT02B6Q, max UDMA/133
[ 1.684749] ata5.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 1.686673] ata5.00: supports DRM functions and may not be fully accessible
[ 1.687253] ata5.00: disabling queued TRIM support
[ 1.688967] ata5.00: configured for UDMA/133
[ 1.704033] sr 2:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.704152] sr 2:0:0:0: Attached scsi CD-ROM sr1
[ 1.704222] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 1.704369] scsi 4:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
[ 1.732035] usb 2-2: new high-speed USB device number 3 using ehci-pci
[ 1.802382] [drm] ib test on ring 5 succeeded
[ 1.802929] [drm] Radeon Display Connectors
[ 1.802930] [drm] Connector 0:
[ 1.802931] [drm] DVI-I-1
[ 1.802931] [drm] HPD1
[ 1.802933] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[ 1.802933] [drm] Encoders:
[ 1.802934] [drm] DFP1: INTERNAL_UNIPHY
[ 1.802935] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 1.802935] [drm] Connector 1:
[ 1.802936] [drm] DIN-1
[ 1.802936] [drm] Encoders:
[ 1.802936] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 1.802937] [drm] Connector 2:
[ 1.802937] [drm] DVI-I-2
[ 1.802938] [drm] HPD2
[ 1.802939] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 1.802939] [drm] Encoders:
[ 1.802940] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 1.802940] [drm] DFP2: INTERNAL_KLDSCP_LVTMA
[ 1.824276] sd 4:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 1.824290] sd 4:0:0:0: [sda] Write Protect is off
[ 1.824291] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.824314] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.824418] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 1.826540] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 1.827797] sd 4:0:0:0: [sda] supports TCG Opal
[ 1.827798] sd 4:0:0:0: [sda] Attached SCSI disk
[ 1.898536] usb 2-2: New USB device found, idVendor=174c, idProduct=55aa
[ 1.898539] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 1.898540] usb 2-2: Product: USB to S-ATA
[ 1.898541] usb 2-2: Manufacturer: Asmedia
[ 1.898542] usb 2-2: SerialNumber: W1F188PK
[ 1.920123] firewire_core 0000:01:0a.3: created device fw0: GUID 2000000003001e23, S400
[ 1.927450] [drm] fb mappable at 0xD0243000
[ 1.927452] [drm] vram apper at 0xD0000000
[ 1.927452] [drm] size 5242880
[ 1.927453] [drm] fb depth is 24
[ 1.927453] [drm] pitch is 5120
[ 1.927524] fbcon: radeondrmfb (fb0) is primary device
[ 1.927604] Console: switching to colour frame buffer device 160x64
[ 1.927633] radeon 0000:04:00.0: fb0: radeondrmfb frame buffer device
[ 1.940040] [drm] Initialized radeon 2.50.0 20080528 for 0000:04:00.0 on minor 0
[ 2.016026] usb 2-3: new high-speed USB device number 4 using ehci-pci
[ 2.170295] usb 2-3: New USB device found, idVendor=174c, idProduct=55aa
[ 2.170296] usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 2.170298] usb 2-3: Product: USB 3.0 device
[ 2.170299] usb 2-3: Manufacturer: Intenso
[ 2.170300] usb 2-3: SerialNumber: 80300000000000001947
[ 2.173931] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 2.174605] scsi host6: usb-storage 2-1:1.0
[ 2.174785] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 2.174840] usb-storage 2-2:1.0: Quirks match for vid 174c pid 55aa: 400000
[ 2.174862] scsi host7: usb-storage 2-2:1.0
[ 2.175093] usbcore: registered new interface driver usb-storage
[ 2.178529] scsi host8: uas
[ 2.178719] usbcore: registered new interface driver uas
[ 2.179427] scsi 8:0:0:0: Direct-Access Intenso USB 3.0 device 0 PQ: 0 ANSI: 6
[ 2.212598] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 2.238316] sd 8:0:0:0: [sdb] 1220942646 4096-byte logical blocks: (5.00 TB/4.55 TiB)
[ 2.238688] sd 8:0:0:0: [sdb] Write Protect is off
[ 2.238690] sd 8:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 2.239439] sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.248027] usb 3-2: new low-speed USB device number 2 using ohci-pci
[ 2.276831] sdb: sdb1
[ 2.279945] sd 8:0:0:0: [sdb] Attached SCSI disk
[ 2.464024] usb 1-4: new high-speed USB device number 4 using ehci-pci
[ 2.473655] usb 3-2: New USB device found, idVendor=046d, idProduct=c517
[ 2.473658] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.473659] usb 3-2: Product: USB Receiver
[ 2.473660] usb 3-2: Manufacturer: Logitech
[ 2.480663] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.497692] usbcore: registered new interface driver usbhid
[ 2.497694] usbhid: USB HID core driver
[ 2.501436] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.0/0003:046D:C517.0001/input/input5
[ 2.560148] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-2/input0
[ 2.560165] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
[ 2.561069] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.1/0003:046D:C517.0002/input/input6
[ 2.612968] usb 1-4: New USB device found, idVendor=04f9, idProduct=003f
[ 2.612971] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.612973] usb 1-4: Product: HL-2130 series
[ 2.612974] usb 1-4: Manufacturer: Brother
[ 2.612975] usb 1-4: SerialNumber: A4N875163
[ 2.620199] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-2/input1
[ 2.732030] usb 1-10: new high-speed USB device number 5 using ehci-pci
[ 3.200671] scsi 6:0:0:0: Direct-Access WD 15EADS External 1.75 PQ: 0 ANSI: 4
[ 3.200954] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 3.201281] scsi 7:0:0:0: Direct-Access ST3000DM 001-9YN166 CC4B PQ: 0 ANSI: 0
[ 3.201501] sd 7:0:0:0: Attached scsi generic sg5 type 0
[ 3.201522] sd 6:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 3.202149] sd 7:0:0:0: [sdd] 732566646 4096-byte logical blocks: (3.00 TB/2.73 TiB)
[ 3.202150] sd 6:0:0:0: [sdc] Write Protect is off
[ 3.202152] sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 3.202773] sd 6:0:0:0: [sdc] No Caching mode page found
[ 3.202777] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 3.203394] sd 7:0:0:0: [sdd] Write Protect is off
[ 3.203397] sd 7:0:0:0: [sdd] Mode Sense: 23 00 00 00
[ 3.204522] sd 7:0:0:0: [sdd] No Caching mode page found
[ 3.204527] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 3.423090] usb 1-10: New USB device found, idVendor=0bda, idProduct=0151
[ 3.423092] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.423093] usb 1-10: Product: USB2.0-CRW
[ 3.423094] usb 1-10: Manufacturer: Generic
[ 3.423095] usb 1-10: SerialNumber: 20060413092100000
[ 3.424612] usb-storage 1-10:1.0: USB Mass Storage device detected
[ 3.424710] scsi host9: usb-storage 1-10:1.0
[ 3.530619] sdd: sdd1 sdd2
[ 3.533728] sd 7:0:0:0: [sdd] Attached SCSI disk
[ 3.677397] sdc: sdc1
[ 3.679756] sd 6:0:0:0: [sdc] Attached SCSI disk
[ 3.982178] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.097505] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 4.097636] systemd[1]: Detected architecture x86-64.
[ 4.097816] systemd[1]: Set hostname to <vettisov-MS-7369>.
[ 4.178776] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.178962] systemd[1]: Created slice System Slice.
[ 4.179031] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[ 4.179113] systemd[1]: Created slice User and Session Slice.
[ 4.179134] systemd[1]: Reached target Slices.
[ 4.179196] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.179249] systemd[1]: Listening on udev Control Socket.
[ 4.267363] lp: driver loaded but no devices found
[ 4.279059] ppdev: user-space parallel port driver
[ 4.289152] parport_pc 00:02: reported by Plug and Play ACPI
[ 4.289224] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 4.325508] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 4.384135] lp0: using parport0 (interrupt-driven).
[ 4.459622] scsi 9:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 4.466186] scsi 9:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 4.472485] systemd-journald[267]: Received request to flush runtime journal from PID 1
[ 4.472597] scsi 9:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 4.478989] scsi 9:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
[ 4.479343] sd 9:0:0:0: Attached scsi generic sg6 type 0
[ 4.479495] sd 9:0:0:1: Attached scsi generic sg7 type 0
[ 4.479645] sd 9:0:0:2: Attached scsi generic sg8 type 0
[ 4.479798] sd 9:0:0:3: Attached scsi generic sg9 type 0
[ 4.489486] sd 9:0:0:1: [sdf] Attached SCSI removable disk
[ 4.490870] sd 9:0:0:0: [sde] Attached SCSI removable disk
[ 4.491733] sd 9:0:0:2: [sdg] Attached SCSI removable disk
[ 4.493234] sd 9:0:0:3: [sdh] Attached SCSI removable disk
[ 4.765277] random: crng init done
[ 4.779698] audit: type=1400 audit(1525050437.064:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=492 comm="apparmor_parser"
[ 4.779703] audit: type=1400 audit(1525050437.064:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=492 comm="apparmor_parser"
[ 4.790539] i2c i2c-5: nForce2 SMBus adapter at 0x2d00
[ 4.790593] i2c i2c-6: nForce2 SMBus adapter at 0x2e00
[ 4.794940] audit: type=1400 audit(1525050437.079:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=493 comm="apparmor_parser"
[ 4.794945] audit: type=1400 audit(1525050437.079:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=493 comm="apparmor_parser"
[ 4.794947] audit: type=1400 audit(1525050437.079:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=493 comm="apparmor_parser"
[ 4.794949] audit: type=1400 audit(1525050437.079:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=493 comm="apparmor_parser"
[ 4.828186] audit: type=1400 audit(1525050437.112:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=503 comm="apparmor_parser"
[ 4.828190] audit: type=1400 audit(1525050437.112:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=503 comm="apparmor_parser"
[ 4.828192] audit: type=1400 audit(1525050437.112:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=503 comm="apparmor_parser"
[ 4.899286] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
[ 4.930943] flexcop-pci: will use the HW PID filter.
[ 4.930946] flexcop-pci: card revision 2
[ 4.952589] dvbdev: DVB: registering new adapter (FlexCop Digital TV device)
[ 4.955266] b2c2-flexcop: MAC address = 00:08:c9:a5:8b:76
[ 4.955552] CX24123: detected CX24123
[ 4.956837] CX24113: trying to detect myself
[ 4.957518] CX24113: successfully detected
[ 4.957864] CX24113: version: 3
[ 4.957865] b2c2-flexcop: CX24113 successfully attached
[ 4.964551] b2c2-flexcop: ISL6421 successfully attached
[ 4.964553] b2c2-flexcop: found 'Conexant CX24123/CX24109' .
[ 4.964558] b2c2_flexcop_pci 0000:01:08.0: DVB: registering adapter 0 frontend 0 (Conexant CX24123/CX24109)...
[ 4.964698] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S rev 2.8' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
[ 5.013335] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
[ 5.444119] ath: EEPROM regdomain: 0x30
[ 5.444121] ath: EEPROM indicates we should expect a direct regpair map
[ 5.444122] ath: Country alpha2 being used: AM
[ 5.444122] ath: Regpair used: 0x30
[ 5.448554] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
[ 5.448581] snd_hda_intel 0000:00:07.0: Disabling MSI
[ 5.449638] snd_hda_intel 0000:04:00.1: Handle vga_switcheroo audio client
[ 5.456769] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0d.0/0000:04:00.1/sound/card1/input7
[ 5.471605] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 5.472369] ieee80211 phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81 mem=0xffffb5ea81850000, irq=18
[ 5.555353] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.913014] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 5.913028] k8temp 0000:00:18.3: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 6.474153] usblp 1-4:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x003F
[ 6.474178] usbcore: registered new interface driver usblp
[ 6.540053] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 6.540057] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.540058] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 6.540059] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 6.540061] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 6.540062] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 6.540064] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 6.540065] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 6.540067] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 6.565971] kvm: Nested Virtualization enabled
[ 6.587452] MCE: In-kernel MCE decoding enabled.
[ 6.603815] EDAC amd64: Node 0: DRAM ECC disabled.
[ 6.603817] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 6.637790] Adding 8387580k swap on /dev/sda6. Priority:-1 extents:1 across:8387580k SSFS
[ 7.159967] kauditd_printk_skb: 21 callbacks suppressed
[ 7.159969] audit: type=1400 audit(1525050439.444:32): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld" name="/proc/1161/status" pid=1161 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=121 ouid=121
[ 7.166560] audit: type=1400 audit(1525050439.451:33): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld" name="/sys/devices/system/node/" pid=1161 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=121 ouid=0
[ 7.166728] audit: type=1400 audit(1525050439.451:34): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld" name="/proc/1161/status" pid=1161 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=121 ouid=121
[ 7.269027] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 7.291176] r8169 0000:03:00.0 enp3s0: link down
[ 7.291189] r8169 0000:03:00.0 enp3s0: link down
[ 7.291272] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 7.706407] ath9k 0000:01:09.0 wlp1s9: renamed from wlan0
[ 7.839933] IPv6: ADDRCONF(NETDEV_UP): wlp1s9: link is not ready
[ 7.849152] IPv6: ADDRCONF(NETDEV_UP): wlp1s9: link is not ready
[ 7.969220] IPv6: ADDRCONF(NETDEV_UP): wlp1s9: link is not ready
[ 8.927130] r8169 0000:03:00.0 enp3s0: link up
[ 8.927140] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 9.622962] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input8
[ 9.623937] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input9
[ 9.624747] input: HDA NVidia Line as /devices/pci0000:00/0000:00:07.0/sound/card0/input10
[ 9.624820] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:07.0/sound/card0/input11
[ 9.624968] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:07.0/sound/card0/input12
[ 9.625034] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:07.0/sound/card0/input13
[ 9.625102] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:07.0/sound/card0/input14
[ 9.625170] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input15
[ 12.172374] usblp1: removed
[ 12.176743] usblp 1-4:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x003F
[ 13.894044] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 1043.616030] usb 1-10: reset high-speed USB device number 5 using ehci-pci
|
|
Anmeldungsdatum: Beiträge: 1431 Wohnort: Rheinland |
Ich muß zu meiner Schande gestehen, daß ich mit der Interpretation dieses Fensters erfahrungsgemäß schnell überfordert bin 😳 . Wenn ich allerdings nach dem Forumsartikel über HDA-Audiokarten gehe, findet sich dort der Realtek ALC888-Baustein. Sieht für mich so aus, als ob der bei Dir laufende snd_hda_intel der passende Treiber ist. Aber ich kann mich irren. Vielleicht lohnt es sich, doch noch mal das dort unter Einrichtung beschriebene Procedere zu probieren? Dort wird stellenweise sogar direkt auf den ALC880 Bezug genommen. |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 85 |
Dann werde ich mich mal an die Arbeit machen. Wahrscheinlich gibt es erst mitte der Woche ein Resultat. Danke fuer die Hife. Gruss Vettisov |
|
Anmeldungsdatum: Beiträge: 23336 |
aplay -l zeigt, daß ein analoges Gerät vorhanden ist. Du mußt im Tool pavucontrol vermutlich nur das Ausgabegerät wechseln.
|
« Vorherige1Nächste »
Antworten |