Hallo, vor einigen Wochen habe ich von ubuntu 16.04 (32bit) auf ubuntu 18.04 (64bit) umgestellt. Soweit alles klar. Als Musikliebhaber stört mich besonders, dass die Audiowiedergabe oft und unerwartet ruckelt, was bei ubuntu 16.04 nie der Fall war. Ich habe mich vergewissert, dass die Audio- bzw. Video-Dateien nicht beschädigt sind (mit VLC und anderen Playern). Aber auch bei Live-Streams und youtube-Videos in Chrome ruckelt es. Ungern würde ich wieder auf ubuntu 16.04 umstellen. Alle nötige Informationen sind angehängt. Für einen Hinweis wäre ich sehr dankbar.
Audio-Wiedergabe ruckelt in Ubuntu 18.04
Anmeldungsdatum: Beiträge: 11 |
|
Supporter
Anmeldungsdatum: Beiträge: 3439 Wohnort: Moers |
... hier im Codeblock Description: Ubuntu 18.04 LTS pierre@pierre-MS-AE6311:~$ uname -r 4.15.0-23-generic pierre@pierre-MS-AE6311:~$ cat /proc/asound/cards 0 [HDMI ]: HDA-Intel - HDA Intel HDMI HDA Intel HDMI at 0xf7e14000 irq 33 1 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xf7e10000 irq 32 pierre@pierre-MS-AE6311:~$ aplay -l **** Liste der Hardware-Geräte (PLAYBACK) **** Karte 0: HDMI [HDA Intel HDMI], Gerät 3: HDMI 0 [HDMI 0] Sub-Geräte: 1/1 Sub-Gerät #0: subdevice #0 Karte 0: HDMI [HDA Intel HDMI], Gerät 7: HDMI 1 [HDMI 1] Sub-Geräte: 1/1 Sub-Gerät #0: subdevice #0 Karte 0: HDMI [HDA Intel HDMI], Gerät 8: HDMI 2 [HDMI 2] Sub-Geräte: 1/1 Sub-Gerät #0: subdevice #0 Karte 0: HDMI [HDA Intel HDMI], Gerät 9: HDMI 3 [HDMI 3] Sub-Geräte: 1/1 Sub-Gerät #0: subdevice #0 Karte 0: HDMI [HDA Intel HDMI], Gerät 10: HDMI 4 [HDMI 4] Sub-Geräte: 1/1 Sub-Gerät #0: subdevice #0 Karte 1: PCH [HDA Intel PCH], Gerät 0: ALC887-VD Analog [ALC887-VD Analog] Sub-Geräte: 1/1 Sub-Gerät #0: subdevice #0 pierre@pierre-MS-AE6311:~$ aplay /usr/share/sounds/alsa/Noise.wav Wiedergabe: WAVE '/usr/share/sounds/alsa/Noise.wav' : Signed 16 bit Little Endian, Rate: 48000 Hz, mono pierre@pierre-MS-AE6311:~$ lspci -nnk | grep -iA2 audio 00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06) Subsystem: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:2010] Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel -- 00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 05) Subsystem: Micro-Star International Co., Ltd. [MSI] 8 Series/C220 Series Chipset High Definition Audio Controller [1462:ae63] Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel pierre@pierre-MS-AE6311:~$ ps -C esd PID TTY TIME CMD pierre@pierre-MS-AE6311:~$ ps -C arts PID TTY TIME CMD pierre@pierre-MS-AE6311:~$ pierre@pierre-MS-AE6311:~$ ps -C pulseaudio PID TTY TIME CMD 1710 ? 00:03:19 pulseaudio pierre@pierre-MS-AE6311:~$ grep "^audio" /etc/group | grep "$USER" | wc -l 1 pierre@pierre-MS-AE6311:~$ dpkg -l | tr -s " " | grep " alsa-" ii alsa-base 1.0.25+dfsg-0ubuntu5 all ALSA driver configuration files ii alsa-utils 1.1.3-1ubuntu1 amd64 Utilities for configuring and using ALSA pierre@pierre-MS-AE6311:~$ lsmod | grep "snd" snd_hda_codec_hdmi 49152 1 snd_hda_codec_realtek 102400 1 snd_hda_codec_generic 73728 1 snd_hda_codec_realtek snd_hda_intel 40960 4 snd_seq_midi 16384 0 snd_seq_midi_event 16384 1 snd_seq_midi snd_hda_codec 126976 4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek snd_hda_core 81920 5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek snd_hwdep 20480 1 snd_hda_codec snd_rawmidi 32768 1 snd_seq_midi snd_pcm 98304 4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi snd_seq 65536 2 snd_seq_midi_event,snd_seq_midi snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi snd_timer 32768 2 snd_seq,snd_pcm snd 81920 19 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_pcm soundcore 16384 1 snd pierre@pierre-MS-AE6311:~$ head -n 3 /proc/asound/card0/codec#0 Codec: Intel Haswell HDMI Address: 0 AFG Function Id: 0x1 (unsol 0) pierre@pierre-MS-AE6311:~$ head -n 3 /proc/asound/card0/codec97#0/ac97#0-0 head: '/proc/asound/card0/codec97#0/ac97#0-0' kann nicht zum Lesen geöffnet werden: Datei oder Verzeichnis nicht gefunden pierre@pierre-MS-AE6311:~$ head -n 3 /proc/asound/card0/codec97#0/ac97#0-0+regs head: '/proc/asound/card0/codec97#0/ac97#0-0+regs' kann nicht zum Lesen geöffnet werden: Datei oder Verzeichnis nicht gefunden pierre@pierre-MS-AE6311:~$ cat ~/.asoundrc cat: /home/pierre/.asoundrc: Datei oder Verzeichnis nicht gefunden pierre@pierre-MS-AE6311:~$ cat ~/.asoundrc.asoundconf cat: /home/pierre/.asoundrc.asoundconf: Datei oder Verzeichnis nicht gefunden pierre@pierre-MS-AE6311:~$ cat /etc/asound.conf cat: /etc/asound.conf: Datei oder Verzeichnis nicht gefunden pierre@pierre-MS-AE6311:~$ pierre@pierre-MS-AE6311:~$ dmesg [ 0.000000] microcode: microcode updated early to revision 0x24, date = 2018-01-21 [ 0.000000] Linux version 4.15.0-23-generic (buildd@lgw01-amd64-055) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #25-Ubuntu SMP Wed May 23 18:02:16 UTC 2018 (Ubuntu 4.15.0-23.25-generic 4.15.18) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-23-generic root=UUID=16df42e7-e950-45a6-a66e-6824b24b3ef8 ro persistent quiet splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cad80fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cad81000-0x00000000cad87fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cad88000-0x00000000cb5a9fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cb5aa000-0x00000000cb864fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cb865000-0x00000000db76cfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db76d000-0x00000000db7f6fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000db7f7000-0x00000000db859fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db85a000-0x00000000db997fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000db998000-0x00000000dbffefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dbfff000-0x00000000dbffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: MICRO-STAR INTERNATIONAL CO., LTD MS-AE6311/MS-AE631, BIOS EAE63IMS V1.5 08/28/2015 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DBFFF write-protect [ 0.000000] DC000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7F00000000 write-back [ 0.000000] 1 base 0100000000 mask 7FE0000000 write-back [ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 3 base 00DE000000 mask 7FFE000000 uncachable [ 0.000000] 4 base 00DD000000 mask 7FFF000000 uncachable [ 0.000000] 5 base 011FE00000 mask 7FFFE00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] total RAM covered: 4046M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 7 lose cover RAM: 0G [ 0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdc000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd6e0-0x000fd6ef] mapped at [ (ptrval)] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 8d000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x76d3f000, 0x76d3ffff] PGTABLE [ 0.000000] BRK [0x76d40000, 0x76d40fff] PGTABLE [ 0.000000] BRK [0x76d41000, 0x76d41fff] PGTABLE [ 0.000000] BRK [0x76d42000, 0x76d42fff] PGTABLE [ 0.000000] BRK [0x76d43000, 0x76d43fff] PGTABLE [ 0.000000] BRK [0x76d44000, 0x76d44fff] PGTABLE [ 0.000000] BRK [0x76d45000, 0x76d45fff] PGTABLE [ 0.000000] BRK [0x76d46000, 0x76d46fff] PGTABLE [ 0.000000] BRK [0x76d47000, 0x76d47fff] PGTABLE [ 0.000000] BRK [0x76d48000, 0x76d48fff] PGTABLE [ 0.000000] BRK [0x76d49000, 0x76d49fff] PGTABLE [ 0.000000] BRK [0x76d4a000, 0x76d4afff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3191f000-0x34c86fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 MSI_NB) [ 0.000000] ACPI: XSDT 0x00000000DB96D088 000094 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DB97A7D8 00010C (v05 MSI_NB MEGABOOK 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000DB96D1B8 00D61B (v02 MSI_NB MEGABOOK 00000150 INTL 20120711) [ 0.000000] ACPI: FACS 0x00000000DB996080 000040 [ 0.000000] ACPI: APIC 0x00000000DB97A8E8 000062 (v03 MSI_NB MEGABOOK 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000DB97A950 000044 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013) [ 0.000000] ACPI: ASF! 0x00000000DB97A998 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: LPIT 0x00000000DB97AA40 00005C (v01 MSI_NB MEGABOOK 00000000 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000DB97AAA0 000228 (v01 INTEL sensrhub 00000000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000DB97ACC8 00018F (v01 Intel zpodd 00001000 INTL 20120711) [ 0.000000] ACPI: SLIC 0x00000000DB97AE58 000176 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000DB97AFD0 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000DB97B510 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) [ 0.000000] ACPI: MCFG 0x00000000DB97BFE8 00003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000DB97C028 000038 (v01 MSI_NB MEGABOOK 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000DB97C060 000315 (v01 SataRe SataTabl 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000DB97C378 003DAC (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x11fdd5000-0x11fdfffff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000011fdfffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cad80fff] [ 0.000000] node 0: [mem 0x00000000cad88000-0x00000000cb5a9fff] [ 0.000000] node 0: [mem 0x00000000cb865000-0x00000000db76cfff] [ 0.000000] node 0: [mem 0x00000000db7f7000-0x00000000db859fff] [ 0.000000] node 0: [mem 0x00000000dbfff000-0x00000000dbffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000011fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fdfffff] [ 0.000000] On node 0 totalpages: 1028779 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 31 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13973 pages used for memmap [ 0.000000] DMA32 zone: 894223 pages, LIFO batch:31 [ 0.000000] Normal zone: 2040 pages used for memmap [ 0.000000] Normal zone: 130560 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 100 pages [ 0.000000] Reserving Intel graphics memory at 0x00000000dd200000-0x00000000df1fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcad81000-0xcad87fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcb5aa000-0xcb864fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb76d000-0xdb7f6fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb85a000-0xdb997fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb998000-0xdbffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdc000000-0xdcffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u1048576 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1012671 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-23-generic root=UUID=16df42e7-e950-45a6-a66e-6824b24b3ef8 ro persistent quiet splash vt.handoff=1 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3902312K/4115116K available (12300K kernel code, 2470K rwdata, 4240K rodata, 2408K init, 2416K bss, 212804K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 39083 entries in 153 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#1 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 2394.180 MHz processor [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.36 BogoMIPS (lpj=9576720) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.024000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.024000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.024000] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.024000] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.024000] CPU: Physical Processor ID: 0 [ 0.024000] CPU: Processor Core ID: 0 [ 0.024000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.024000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.024000] mce: CPU supports 7 MCE banks [ 0.024000] CPU0: Thermal monitoring enabled (TM1) [ 0.024000] process: using mwait in idle threads [ 0.024000] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.024000] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.024000] Spectre V2 : Mitigation: Full generic retpoline [ 0.024000] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.024000] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.024000] Speculative Store Bypass: Vulnerable [ 0.028474] Freeing SMP alternatives memory: 36K [ 0.029783] TSC deadline timer enabled [ 0.029785] smpboot: CPU0: Intel(R) Pentium(R) CPU 3560M @ 2.40GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.029849] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.029890] ... version: 3 [ 0.029891] ... bit width: 48 [ 0.029891] ... generic registers: 8 [ 0.029892] ... value mask: 0000ffffffffffff [ 0.029892] ... max period: 00007fffffffffff [ 0.029893] ... fixed-purpose events: 3 [ 0.029893] ... event mask: 00000007000000ff [ 0.029928] Hierarchical SRCU implementation. [ 0.030755] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.030770] smp: Bringing up secondary CPUs ... [ 0.030837] x86: Booting SMP configuration: [ 0.030839] .... node #0, CPUs: #1 [ 0.032000] smp: Brought up 1 node, 2 CPUs [ 0.032000] smpboot: Max logical packages: 1 [ 0.032000] smpboot: Total of 2 processors activated (9576.72 BogoMIPS) [ 0.032074] devtmpfs: initialized [ 0.032074] x86/mm: Memory block size: 128MB [ 0.032411] evm: security.selinux [ 0.032411] evm: security.SMACK64 [ 0.032412] evm: security.SMACK64EXEC [ 0.032412] evm: security.SMACK64TRANSMUTE [ 0.032413] evm: security.SMACK64MMAP [ 0.032413] evm: security.apparmor [ 0.032414] evm: security.ima [ 0.032414] evm: security.capability [ 0.032441] PM: Registering ACPI NVS region [mem 0xcad81000-0xcad87fff] (28672 bytes) [ 0.032441] PM: Registering ACPI NVS region [mem 0xdb85a000-0xdb997fff] (1302528 bytes) [ 0.032441] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.032441] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.032441] pinctrl core: initialized pinctrl subsystem [ 0.032441] RTC time: 3:43:34, date: 07/02/18 [ 0.032441] NET: Registered protocol family 16 [ 0.032441] audit: initializing netlink subsys (disabled) [ 0.032441] audit: type=2000 audit(1530503014.032:1): state=initialized audit_enabled=0 res=1 [ 0.032441] cpuidle: using governor ladder [ 0.032441] cpuidle: using governor menu [ 0.032441] ACPI: bus type PCI registered [ 0.032441] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.032441] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.032441] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.032441] PCI: Using configuration type 1 for base access [ 0.032441] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 0.033067] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.033067] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.033067] ACPI: Added _OSI(Module Device) [ 0.033067] ACPI: Added _OSI(Processor Device) [ 0.033067] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.033067] ACPI: Added _OSI(Processor Aggregator Device) [ 0.033067] ACPI: Executed 2 blocks of module-level executable AML code [ 0.041765] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.042935] ACPI: Dynamic OEM Table Load: [ 0.042941] ACPI: SSDT 0xFFFF9B1BDA563000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.043516] ACPI: Dynamic OEM Table Load: [ 0.043521] ACPI: SSDT 0xFFFF9B1BDA555800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.044144] ACPI: Dynamic OEM Table Load: [ 0.044147] ACPI: SSDT 0xFFFF9B1BDA5B8A00 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.044949] ACPI: Interpreter enabled [ 0.044983] ACPI: (supports S0 S3 S4 S5) [ 0.044984] ACPI: Using IOAPIC for interrupt routing [ 0.045017] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.045356] ACPI: Enabled 13 GPEs in block 00 to 3F [ 0.058070] ACPI: Power Resource [FN00] (off) [ 0.058163] ACPI: Power Resource [FN01] (off) [ 0.058253] ACPI: Power Resource [FN02] (off) [ 0.058343] ACPI: Power Resource [FN03] (off) [ 0.058431] ACPI: Power Resource [FN04] (off) [ 0.059620] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.059626] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.060473] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.061081] PCI host bridge to bus 0000:00 [ 0.061084] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.061085] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.061086] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.061088] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.061089] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.061090] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.061092] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window] [ 0.061093] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.061102] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000 [ 0.061201] pci 0000:00:02.0: [8086:0406] type 00 class 0x030000 [ 0.061212] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.061218] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.061222] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.061311] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.061321] pci 0000:00:03.0: reg 0x10: [mem 0xf7e14000-0xf7e17fff 64bit] [ 0.061436] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.061458] pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit] [ 0.061517] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.061598] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.061619] pci 0000:00:16.0: reg 0x10: [mem 0xf7e1e000-0xf7e1e00f 64bit] [ 0.061682] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.061764] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.061786] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e1c000-0xf7e1c3ff] [ 0.061866] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.061948] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.061968] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit] [ 0.062037] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.062120] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.062191] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.062335] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.062407] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.062543] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.062615] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.062755] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.062777] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e1b000-0xf7e1b3ff] [ 0.062859] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.062941] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100 [ 0.063122] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601 [ 0.063138] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] [ 0.063146] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] [ 0.063153] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] [ 0.063161] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] [ 0.063168] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.063176] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e1a000-0xf7e1a7ff] [ 0.063212] pci 0000:00:1f.2: PME# supported from D3hot [ 0.063287] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.063305] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e19000-0xf7e190ff 64bit] [ 0.063325] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.063480] acpiphp: Slot [1] registered [ 0.063486] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.063583] pci 0000:02:00.0: [10ec:b723] type 00 class 0x028000 [ 0.063636] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.063683] pci 0000:02:00.0: reg 0x18: [mem 0xf7d00000-0xf7d03fff 64bit] [ 0.063868] pci 0000:02:00.0: supports D1 D2 [ 0.063870] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.076053] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.076057] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 0.076060] pci 0000:00:1c.3: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.076146] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.076177] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.076206] pci 0000:03:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit] [ 0.076224] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref] [ 0.076325] pci 0000:03:00.0: supports D1 D2 [ 0.076327] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.088033] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.088037] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.088040] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.088046] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.088975] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.089045] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.089114] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15) [ 0.089182] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.089250] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.089319] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.089388] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.089457] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.090080] SCSI subsystem initialized [ 0.090090] libata version 3.00 loaded. [ 0.090090] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.090090] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.090090] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.090090] vgaarb: loaded [ 0.090090] ACPI: bus type USB registered [ 0.090090] usbcore: registered new interface driver usbfs [ 0.090090] usbcore: registered new interface driver hub [ 0.090090] usbcore: registered new device driver usb [ 0.090090] EDAC MC: Ver: 3.0.0 [ 0.090090] PCI: Using ACPI for IRQ routing [ 0.090090] PCI: pci_cache_line_size set to 64 bytes [ 0.090090] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.090090] e820: reserve RAM buffer [mem 0xcad81000-0xcbffffff] [ 0.090090] e820: reserve RAM buffer [mem 0xcb5aa000-0xcbffffff] [ 0.090090] e820: reserve RAM buffer [mem 0xdb76d000-0xdbffffff] [ 0.090090] e820: reserve RAM buffer [mem 0xdb85a000-0xdbffffff] [ 0.090090] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff] [ 0.090090] NetLabel: Initializing [ 0.090090] NetLabel: domain hash size = 128 [ 0.090090] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.090090] NetLabel: unlabeled traffic allowed by default [ 0.092034] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.092040] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.094057] clocksource: Switched to clocksource hpet [ 0.102130] VFS: Disk quotas dquot_6.6.0 [ 0.102147] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.102243] AppArmor: AppArmor Filesystem Enabled [ 0.102270] pnp: PnP ACPI init [ 0.102398] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.102403] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.102661] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.102663] system 00:01: [io 0xffff] has been reserved [ 0.102664] system 00:01: [io 0xffff] has been reserved [ 0.102666] system 00:01: [io 0xffff] has been reserved [ 0.102667] system 00:01: [io 0x1c00-0x1cfe] has been reserved [ 0.102669] system 00:01: [io 0x1d00-0x1dfe] has been reserved [ 0.102670] system 00:01: [io 0x1e00-0x1efe] has been reserved [ 0.102672] system 00:01: [io 0x1f00-0x1ffe] has been reserved [ 0.102673] system 00:01: [io 0x1800-0x18fe] has been reserved [ 0.102674] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.102679] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.102707] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.102761] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.102765] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.102980] system 00:04: [io 0x0a00-0x0a1f] has been reserved [ 0.102982] system 00:04: [io 0x0a20-0x0a2f] has been reserved [ 0.102983] system 00:04: [io 0x0a30-0x0a3f] has been reserved [ 0.102985] system 00:04: [io 0x0a40-0x0a4f] has been reserved [ 0.102988] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.103057] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.103061] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.103103] pnp 00:06: Plug and Play ACPI device, IDs NTN0530 (active) [ 0.103658] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.103660] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.103661] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.103663] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.103664] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.103666] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.103668] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.103669] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.103671] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.103672] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.103674] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 0.103676] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.103679] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.104031] pnp: PnP ACPI: found 8 devices [ 0.110116] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.110144] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.110155] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.110158] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 0.110163] pci 0000:00:1c.3: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.110170] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.110173] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.110178] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.110181] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.110188] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.110189] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.110191] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.110192] pci_bus 0000:00: resource 7 [mem 0x000dc000-0x000dffff window] [ 0.110194] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000e3fff window] [ 0.110195] pci_bus 0000:00: resource 9 [mem 0x000e4000-0x000e7fff window] [ 0.110197] pci_bus 0000:00: resource 10 [mem 0xdf200000-0xfeafffff window] [ 0.110198] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.110200] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 0.110201] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.110202] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.110204] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.110334] NET: Registered protocol family 2 [ 0.110536] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.110600] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.110694] TCP: Hash tables configured (established 32768 bind 32768) [ 0.110723] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.110738] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.110781] NET: Registered protocol family 1 [ 0.110794] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.156117] PCI: CLS 64 bytes, default 64 [ 0.156153] Unpacking initramfs... [ 0.947065] Freeing initrd memory: 52640K [ 0.947072] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.947075] software IO TLB [mem 0xd776d000-0xdb76d000] (64MB) mapped at [000000000b9cc309-000000006c649778] [ 0.947255] Scanning for low memory corruption every 60 seconds [ 0.947833] Initialise system trusted keyrings [ 0.947842] Key type blacklist registered [ 0.947869] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 0.948912] zbud: loaded [ 0.949360] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.949479] fuse init (API version 7.26) [ 0.950637] Key type asymmetric registered [ 0.950638] Asymmetric key parser 'x509' registered [ 0.950672] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.950696] io scheduler noop registered [ 0.950697] io scheduler deadline registered [ 0.950734] io scheduler cfq registered (default) [ 0.951379] pcieport 0000:00:1c.0: Signaling PME with IRQ 24 [ 0.951403] pcieport 0000:00:1c.3: Signaling PME with IRQ 25 [ 0.951420] pcieport 0000:00:1c.4: Signaling PME with IRQ 26 [ 0.951486] vesafb: mode is 1920x1080x32, linelength=7680, pages=0 [ 0.951487] vesafb: scrolling: redraw [ 0.951488] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.951501] vesafb: framebuffer at 0xe0000000, mapped to 0x00000000fbcabef4, using 8128k, total 8128k [ 0.951590] Console: switching to colour frame buffer device 240x67 [ 0.951618] fb0: VESA VGA frame buffer device [ 0.951631] intel_idle: MWAIT substates: 0x42120 [ 0.951632] intel_idle: v0.4.1 model 0x3C [ 0.951697] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.951803] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.951828] ACPI: Power Button [PWRB] [ 0.951861] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.951878] ACPI: Power Button [PWRF] [ 0.952597] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 0.952760] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.952761] ACPI: Thermal Zone [TZ00] (28 C) [ 0.953045] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.953046] ACPI: Thermal Zone [TZ01] (30 C) [ 0.953196] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.955072] Linux agpgart interface v0.103 [ 0.956222] loop: module loaded [ 0.956364] libphy: Fixed MDIO Bus: probed [ 0.956365] tun: Universal TUN/TAP device driver, 1.6 [ 0.956403] PPP generic driver version 2.4.2 [ 0.956448] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.956451] ehci-pci: EHCI PCI platform driver [ 0.956568] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.956575] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.956586] ehci-pci 0000:00:1a.0: debug port 2 [ 0.960498] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.960510] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e1c000 [ 0.976065] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.976111] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.976113] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.976115] usb usb1: Product: EHCI Host Controller [ 0.976116] usb usb1: Manufacturer: Linux 4.15.0-23-generic ehci_hcd [ 0.976117] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.976314] hub 1-0:1.0: USB hub found [ 0.976319] hub 1-0:1.0: 2 ports detected [ 0.976588] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.976592] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.976603] ehci-pci 0000:00:1d.0: debug port 2 [ 0.980519] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.980530] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e1b000 [ 0.996069] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.996124] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.996126] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.996127] usb usb2: Product: EHCI Host Controller [ 0.996128] usb usb2: Manufacturer: Linux 4.15.0-23-generic ehci_hcd [ 0.996130] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.996331] hub 2-0:1.0: USB hub found [ 0.996337] hub 2-0:1.0: 2 ports detected [ 0.996486] ehci-platform: EHCI generic platform driver [ 0.996501] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.996504] ohci-pci: OHCI PCI platform driver [ 0.996511] ohci-platform: OHCI generic platform driver [ 0.996517] uhci_hcd: USB Universal Host Controller Interface driver [ 0.996653] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.996657] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.997739] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 0.997744] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.997867] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.997869] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.997870] usb usb3: Product: xHCI Host Controller [ 0.997872] usb usb3: Manufacturer: Linux 4.15.0-23-generic xhci-hcd [ 0.997873] usb usb3: SerialNumber: 0000:00:14.0 [ 0.998047] hub 3-0:1.0: USB hub found [ 0.998063] hub 3-0:1.0: 14 ports detected [ 1.001160] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.001163] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.001196] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.001197] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.001198] usb usb4: Product: xHCI Host Controller [ 1.001200] usb usb4: Manufacturer: Linux 4.15.0-23-generic xhci-hcd [ 1.001201] usb usb4: SerialNumber: 0000:00:14.0 [ 1.001373] hub 4-0:1.0: USB hub found [ 1.001385] hub 4-0:1.0: 4 ports detected [ 1.001858] i8042: PNP: No PS/2 controller found. [ 1.002083] mousedev: PS/2 mouse device common for all mice [ 1.002319] rtc_cmos 00:02: RTC can wake from S4 [ 1.002454] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.002479] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.002485] i2c /dev entries driver [ 1.002531] device-mapper: uevent: version 1.0.3 [ 1.002591] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 1.002596] intel_pstate: Intel P-state driver initializing [ 1.002660] ledtrig-cpu: registered to indicate activity on CPUs [ 1.002960] NET: Registered protocol family 10 [ 1.006404] Segment Routing with IPv6 [ 1.006424] NET: Registered protocol family 17 [ 1.006458] Key type dns_resolver registered [ 1.006620] RAS: Correctable Errors collector initialized. [ 1.006647] microcode: sig=0x306c3, pf=0x10, revision=0x24 [ 1.006686] microcode: Microcode Update Driver: v2.2. [ 1.006694] sched_clock: Marking stable (1006682167, 0)->(984602340, 22079827) [ 1.006871] registered taskstats version 1 [ 1.006878] Loading compiled-in X.509 certificates [ 1.009134] Loaded X.509 cert 'Build time autogenerated kernel key: d77482c25b833df502ed38a87c5d7f330fdff3cb' [ 1.009154] zswap: loaded using pool lzo/zbud [ 1.012084] Key type big_key registered [ 1.012087] Key type trusted registered [ 1.013496] Key type encrypted registered [ 1.013499] AppArmor: AppArmor sha1 policy hashing enabled [ 1.013501] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.013520] evm: HMAC attrs: 0x1 [ 1.013965] Magic number: 10:155:714 [ 1.014076] rtc_cmos 00:02: setting system clock to 2018-07-02 03:43:35 UTC (1530503015) [ 1.014128] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.014129] EDD information not available. [ 1.016533] Freeing unused kernel memory: 2408K [ 1.040092] Write protecting the kernel read-only data: 20480k [ 1.040534] Freeing unused kernel memory: 2008K [ 1.044729] Freeing unused kernel memory: 1904K [ 1.051042] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.051043] x86/mm: Checking user space page tables [ 1.057280] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.166466] ahci 0000:00:1f.2: version 3.0 [ 1.166667] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x11 impl SATA mode [ 1.166670] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 1.169998] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.181093] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0x00000000f2667da4, d8:cb:8a:ab:b0:22, XID 0c000800 IRQ 29 [ 1.181095] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.197200] scsi host0: ahci [ 1.201954] scsi host1: ahci [ 1.202049] scsi host2: ahci [ 1.202113] scsi host3: ahci [ 1.202177] scsi host4: ahci [ 1.202209] ata1: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a100 irq 28 [ 1.202210] ata2: DUMMY [ 1.202211] ata3: DUMMY [ 1.202212] ata4: DUMMY [ 1.202214] ata5: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a300 irq 28 [ 1.202592] [drm] Memory usable by graphics device = 2048M [ 1.202594] checking generic (e0000000 7f0000) vs hw (e0000000 10000000) [ 1.202594] fb: switching to inteldrmfb from VESA VGA [ 1.202612] Console: switching to colour dummy device 80x25 [ 1.202674] [drm] Replacing VGA console driver [ 1.208090] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.208091] [drm] Driver supports precise vblank timestamp query. [ 1.210131] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.218728] r8169 0000:03:00.0 enp3s0: renamed from eth0 [ 1.221111] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0 [ 1.222658] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.222985] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input2 [ 1.240226] fbcon: inteldrmfb (fb0) is primary device [ 1.240276] Console: switching to colour frame buffer device 240x67 [ 1.240302] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.316114] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.340117] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.340128] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.472527] usb 1-1: New USB device found, idVendor=8087, idProduct=8008 [ 1.472529] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.472779] hub 1-1:1.0: USB hub found [ 1.472855] hub 1-1:1.0: 6 ports detected [ 1.489751] usb 3-3: New USB device found, idVendor=2109, idProduct=2811 [ 1.489754] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.489755] usb 3-3: Product: USB2.0 Hub [ 1.489757] usb 3-3: Manufacturer: VIA Labs, Inc. [ 1.490317] hub 3-3:1.0: USB hub found [ 1.490735] hub 3-3:1.0: 4 ports detected [ 1.496523] usb 2-1: New USB device found, idVendor=8087, idProduct=8000 [ 1.496525] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.496778] hub 2-1:1.0: USB hub found [ 1.496857] hub 2-1:1.0: 8 ports detected [ 1.515431] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.518882] ata1.00: ATAPI: TSSTcorp CDDVDW SU-208HB, TM00, max UDMA/100 [ 1.519361] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.520629] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.520632] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.520634] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.521734] ata1.00: configured for UDMA/100 [ 1.521740] ata5.00: ATA-8: HGST HTS725050A7E630, GS2OA230, max UDMA/133 [ 1.521742] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.523066] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.523069] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.523071] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.524099] ata5.00: configured for UDMA/133 [ 1.527749] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SU-208HB TM00 PQ: 0 ANSI: 5 [ 1.594436] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.594438] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.594573] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.594640] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.594808] scsi 4:0:0:0: Direct-Access ATA HGST HTS725050A7 A230 PQ: 0 ANSI: 5 [ 1.594974] sd 4:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.594976] sd 4:0:0:0: [sda] 4096-byte physical blocks [ 1.594985] sd 4:0:0:0: [sda] Write Protect is off [ 1.594987] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.595001] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.595190] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 1.616405] usb 4-3: new SuperSpeed USB device number 2 using xhci_hcd [ 1.637387] sda: sda1 [ 1.637784] sd 4:0:0:0: [sda] Attached SCSI disk [ 1.875532] usb 4-3: New USB device found, idVendor=2109, idProduct=8110 [ 1.875534] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.875535] usb 4-3: Product: USB3.0 Hub [ 1.875537] usb 4-3: Manufacturer: VIA Labs, Inc. [ 1.877085] hub 4-3:1.0: USB hub found [ 1.877685] hub 4-3:1.0: 4 ports detected [ 1.948190] tsc: Refined TSC clocksource calibration: 2394.455 MHz [ 1.948197] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283c1579c6, max_idle_ns: 440795259439 ns [ 2.000193] usb 3-6: new high-speed USB device number 3 using xhci_hcd [ 2.148490] usb 3-6: New USB device found, idVendor=0409, idProduct=005a [ 2.148492] usb 3-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.148939] hub 3-6:1.0: USB hub found [ 2.148996] hub 3-6:1.0: 4 ports detected [ 2.276144] usb 3-7: new high-speed USB device number 4 using xhci_hcd [ 2.504197] usb 3-6.1: new full-speed USB device number 5 using xhci_hcd [ 2.530376] usb 3-7: New USB device found, idVendor=5986, idProduct=0527 [ 2.530378] usb 3-7: New USB device strings: Mfr=3, Product=1, SerialNumber=0 [ 2.530380] usb 3-7: Product: BisonCam, NB Pro [ 2.530381] usb 3-7: Manufacturer: [ 2.607378] usb 3-6.1: New USB device found, idVendor=046d, idProduct=c534 [ 2.607380] usb 3-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.607382] usb 3-6.1: Product: USB Receiver [ 2.607383] usb 3-6.1: Manufacturer: Logitech [ 2.732151] usb 3-10: new high-speed USB device number 6 using xhci_hcd [ 2.880749] usb 3-10: New USB device found, idVendor=0bda, idProduct=0139 [ 2.880751] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.880753] usb 3-10: Product: USB2.0-CRW [ 2.880754] usb 3-10: Manufacturer: Generic [ 2.880755] usb 3-10: SerialNumber: 20100201396000000 [ 2.960144] usb 3-6.4: new low-speed USB device number 7 using xhci_hcd [ 2.972361] clocksource: Switched to clocksource tsc [ 3.066152] usb 3-6.4: New USB device found, idVendor=046d, idProduct=c31c [ 3.066155] usb 3-6.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.066156] usb 3-6.4: Product: USB Keyboard [ 3.066158] usb 3-6.4: Manufacturer: Logitech [ 3.188187] usb 3-12: new full-speed USB device number 8 using xhci_hcd [ 3.337469] usb 3-12: New USB device found, idVendor=13d3, idProduct=3410 [ 3.337471] usb 3-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.337472] usb 3-12: Product: Bluetooth Radio [ 3.337474] usb 3-12: Manufacturer: Realtek [ 3.337475] usb 3-12: SerialNumber: 00e04c000001 [ 3.342801] usbcore: registered new interface driver rtsx_usb [ 3.345976] hidraw: raw HID events driver (C) Jiri Kosina [ 3.361641] usbcore: registered new interface driver usbhid [ 3.361642] usbhid: USB HID core driver [ 3.363931] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6.1/3-6.1:1.0/0003:046D:C534.0001/input/input3 [ 3.420298] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-6.1/input0 [ 3.420553] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6.1/3-6.1:1.1/0003:046D:C534.0002/input/input4 [ 3.480460] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-6.1/input1 [ 3.480595] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6.4/3-6.4:1.0/0003:046D:C31C.0003/input/input5 [ 3.540351] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-6.4/input0 [ 3.540495] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6.4/3-6.4:1.1/0003:046D:C31C.0004/input/input6 [ 3.600334] hid-generic 0003:046D:C31C.0004: input,hidraw3: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-6.4/input1 [ 3.753829] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 4.295459] mmc0: new ultra high speed SDR50 SDHC card at address 59b4 [ 4.955886] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.049287] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 5.068304] systemd[1]: Detected architecture x86-64. [ 5.089060] systemd[1]: Set hostname to <pierre-MS-AE6311>. [ 5.277417] random: crng init done [ 6.315455] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.315494] systemd[1]: Reached target User and Group Name Lookups. [ 6.315506] systemd[1]: Reached target Remote File Systems. [ 6.315665] systemd[1]: Created slice System Slice. [ 6.315720] systemd[1]: Listening on udev Kernel Socket. [ 6.315767] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 6.315814] systemd[1]: Listening on fsck to fsckd communication Socket. [ 6.753314] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 7.328792] lp: driver loaded but no devices found [ 7.400842] ppdev: user-space parallel port driver [ 7.424445] systemd-journald[248]: Received request to flush runtime journal from PID 1 [ 7.539700] Adding 2097152k swap on /swapfile. Priority:-2 extents:29 across:4956160k FS [ 13.840702] nuvoton-cir 00:06: found NCT6779D or compatible: chip id: 0xc5 0x62 [ 13.842882] lirc_dev: IR Remote Control driver registered, major 243 [ 13.843868] IR LIRC bridge handler initialized [ 13.880123] Registered IR keymap rc-rc6-mce [ 13.897733] EDAC ie31200: No ECC support [ 13.924966] mei_me 0000:00:16.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1 [ 13.939572] Bluetooth: Core ver 2.22 [ 13.939588] NET: Registered protocol family 31 [ 13.939589] Bluetooth: HCI device and connection manager initialized [ 13.939592] Bluetooth: HCI socket layer initialized [ 13.939594] Bluetooth: L2CAP socket layer initialized [ 13.939598] Bluetooth: SCO socket layer initialized [ 13.949458] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 13.950777] usbcore: registered new interface driver btusb [ 13.958630] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 [ 13.958632] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_config.bin [ 13.962847] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000183B (\MCRG) (20170831/utaddress-247) [ 13.962854] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170831/utaddress-247) [ 13.962859] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.962862] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\SBSC) (20170831/utaddress-247) [ 13.962866] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\SBMC) (20170831/utaddress-247) [ 13.962870] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247) [ 13.962874] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\_SB.PCI0.LPCB.SBSC) (20170831/utaddress-247) [ 13.962878] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.962878] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\SBSC) (20170831/utaddress-247) [ 13.962882] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\SBMC) (20170831/utaddress-247) [ 13.962886] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170831/utaddress-247) [ 13.962889] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247) [ 13.962893] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\_SB.PCI0.LPCB.SBSC) (20170831/utaddress-247) [ 13.962896] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.962897] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\SBSC) (20170831/utaddress-247) [ 13.962900] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\SBMC) (20170831/utaddress-247) [ 13.962904] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170831/utaddress-247) [ 13.962908] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247) [ 13.962912] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\_SB.PCI0.LPCB.SBSC) (20170831/utaddress-247) [ 13.962915] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.962916] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 13.973364] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 13.988466] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 13.989405] input: MSI WMI hotkeys as /devices/virtual/input/input8 [ 14.000140] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 14.010586] IR RC6 protocol handler initialized [ 14.021740] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 14.021742] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 14.021744] snd_hda_codec_realtek hdaudioC1D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 14.021745] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 14.021746] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 14.021748] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x19 [ 14.021749] snd_hda_codec_realtek hdaudioC1D0: Mic=0x18 [ 14.035230] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9 [ 14.035273] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10 [ 14.036147] rc rc0: Nuvoton w836x7hg Infrared Remote Transceiver as /devices/pnp0/00:06/rc/rc0 [ 14.036184] input: Nuvoton w836x7hg Infrared Remote Transceiver as /devices/pnp0/00:06/rc/rc0/input7 [ 14.053100] rtl8723be: Using firmware rtlwifi/rtl8723befw_36.bin [ 14.053461] lirc lirc0: lirc_dev: driver ir-lirc-codec (nuvoton-cir) registered at minor = 0 [ 14.053487] nuvoton-cir 00:06: driver has been successfully loaded [ 14.060378] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 14.060601] rtlwifi: rtlwifi: wireless switch is on [ 14.074151] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 14.074153] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 14.074153] RAPL PMU: hw unit of domain package 2^-14 Joules [ 14.074154] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 14.074154] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 14.075017] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 [ 14.075020] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin [ 14.133378] intel_rapl: Found RAPL domain package [ 14.133379] intel_rapl: Found RAPL domain core [ 14.133380] intel_rapl: Found RAPL domain uncore [ 14.133381] intel_rapl: Found RAPL domain dram [ 14.133383] intel_rapl: RAPL package 0 domain package locked by BIOS [ 14.133387] intel_rapl: RAPL package 0 domain dram locked by BIOS [ 14.152334] Bluetooth: hci0: rom_version status=0 version=1 [ 14.152341] Bluetooth: hci0: cfg_sz 0, total size 22496 [ 14.301310] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11 [ 14.301356] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12 [ 14.301394] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ 14.301433] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 [ 14.301469] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15 [ 14.537160] mmcblk0: mmc0:59b4 SDU1 7.48 GiB [ 14.549610] mmcblk0: [ 14.570886] media: Linux media interface: v0.10 [ 14.593401] Linux video capture interface: v2.00 [ 14.607170] uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:0527) [ 14.622377] uvcvideo 3-7:1.0: Entity type for entity Extension 4 was not initialized! [ 14.622381] uvcvideo 3-7:1.0: Entity type for entity Processing 2 was not initialized! [ 14.622382] uvcvideo 3-7:1.0: Entity type for entity Camera 1 was not initialized! [ 14.622450] input: BisonCam, NB Pro: BisonCam, NB as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/input/input16 [ 14.622519] usbcore: registered new interface driver uvcvideo [ 14.622520] USB Video Class driver (1.1.1) [ 14.654500] audit: type=1400 audit(1530503029.134:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=471 comm="apparmor_parser" [ 14.654503] audit: type=1400 audit(1530503029.134:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=471 comm="apparmor_parser" [ 14.657072] audit: type=1400 audit(1530503029.138:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=472 comm="apparmor_parser" [ 14.657076] audit: type=1400 audit(1530503029.138:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=472 comm="apparmor_parser" [ 14.657078] audit: type=1400 audit(1530503029.138:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=472 comm="apparmor_parser" [ 14.657080] audit: type=1400 audit(1530503029.138:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=472 comm="apparmor_parser" [ 14.680604] audit: type=1400 audit(1530503029.162:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=474 comm="apparmor_parser" [ 14.680608] audit: type=1400 audit(1530503029.162:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=474 comm="apparmor_parser" [ 14.680610] audit: type=1400 audit(1530503029.162:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=474 comm="apparmor_parser" [ 14.680612] audit: type=1400 audit(1530503029.162:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=474 comm="apparmor_parser" [ 14.891104] nfc: nfc_init: NFC Core ver 0.1 [ 14.891122] NET: Registered protocol family 39 [ 14.897142] Probing NFC pn544 [ 15.703186] rtl8723be 0000:02:00.0 wlp2s0: renamed from wlan0 [ 16.910297] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.910298] Bluetooth: BNEP filters: protocol multicast [ 16.910304] Bluetooth: BNEP socket layer initialized [ 20.742454] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 20.954747] r8169 0000:03:00.0 enp3s0: link down [ 20.954766] r8169 0000:03:00.0 enp3s0: link down [ 20.954919] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 21.048585] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 21.797565] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 21.863322] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 22.850279] wlp2s0: authenticate with 1c:74:0d:78:63:8f [ 22.860461] wlp2s0: send auth to 1c:74:0d:78:63:8f (try 1/3) [ 22.862353] wlp2s0: authenticated [ 22.864156] wlp2s0: associate with 1c:74:0d:78:63:8f (try 1/3) [ 22.867599] wlp2s0: RX AssocResp from 1c:74:0d:78:63:8f (capab=0x411 status=0 aid=1) [ 22.867855] wlp2s0: associated [ 23.891474] r8169 0000:03:00.0 enp3s0: link up [ 23.891482] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready [ 24.619101] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 25.740214] Bluetooth: RFCOMM TTY layer initialized [ 25.740219] Bluetooth: RFCOMM socket layer initialized [ 25.740224] Bluetooth: RFCOMM ver 1.11 [ 49.904908] FAT-fs (mmcblk0): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 487.932544] IPv6: ipv6_create_tempaddr: regeneration time exceeded - disabled temporary address support [ 941.060442] IPv6: ipv6_create_tempaddr: regeneration time exceeded - disabled temporary address support [15443.231824] perf: interrupt took too long (2532 > 2500), lowering kernel.perf_event_max_sample_rate to 78750 [15886.844418] wlp2s0: deauthenticating from 1c:74:0d:78:63:8f by local choice (Reason: 3=DEAUTH_LEAVING) [20345.369295] usb 3-4: new high-speed USB device number 9 using xhci_hcd [20345.518172] usb 3-4: New USB device found, idVendor=1c9e, idProduct=9e08 [20345.518179] usb 3-4: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [20345.518183] usb 3-4: Product: PAP5300 DUO [20345.518186] usb 3-4: Manufacturer: LongCheer Incorporated [20345.518190] usb 3-4: SerialNumber: PAP5300DUO [20346.228407] usb-storage 3-4:1.0: USB Mass Storage device detected [20346.228514] scsi host5: usb-storage 3-4:1.0 [20346.228593] usb-storage 3-4:1.1: USB Mass Storage device detected [20346.228655] scsi host6: usb-storage 3-4:1.1 [20346.228716] usbcore: registered new interface driver usb-storage [20346.247380] usbcore: registered new interface driver uas [20347.067098] usb 3-4: USB disconnect, device number 9 [20347.377331] usb 3-4: new high-speed USB device number 10 using xhci_hcd [20347.526556] usb 3-4: New USB device found, idVendor=1c9e, idProduct=9e17 [20347.526562] usb 3-4: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [20347.526566] usb 3-4: Product: PAP5300 DUO [20347.526570] usb 3-4: Manufacturer: LongCheer Incorporated [20347.526573] usb 3-4: SerialNumber: PAP5300DUO [20347.528744] usb-storage 3-4:1.3: USB Mass Storage device detected [20347.529101] scsi host5: usb-storage 3-4:1.3 [20348.557457] scsi 5:0:0:0: Direct-Access PAP5300 DUO MS 2.31 PQ: 0 ANSI: 2 [20348.557829] scsi 5:0:0:1: Direct-Access PAP5300 DUO MS 2.31 PQ: 0 ANSI: 2 [20348.561630] sd 5:0:0:0: Attached scsi generic sg2 type 0 [20348.562472] sd 5:0:0:0: Power-on or device reset occurred [20348.562774] sd 5:0:0:1: Attached scsi generic sg3 type 0 [20348.564502] sd 5:0:0:1: Power-on or device reset occurred [20348.565422] sd 5:0:0:0: [sdb] Attached SCSI removable disk [20348.565837] sd 5:0:0:1: [sdc] Attached SCSI removable disk [20349.232874] usbcore: registered new interface driver usbserial_generic [20349.232899] usbserial: USB Serial support registered for generic [20349.263469] usbcore: registered new interface driver option [20349.263487] usbserial: USB Serial support registered for GSM modem (1-port) [20355.628323] sd 5:0:0:0: [sdb] 2351104 512-byte logical blocks: (1.20 GB/1.12 GiB) [20355.844129] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [20356.065925] sdb: [20356.267246] option 3-4:1.0: GSM modem (1-port) converter detected [20356.267364] usb 3-4: GSM modem (1-port) converter now attached to ttyUSB0 [20356.267419] option 3-4:1.1: GSM modem (1-port) converter detected [20356.267510] usb 3-4: GSM modem (1-port) converter now attached to ttyUSB1 [20356.267553] option 3-4:1.2: GSM modem (1-port) converter detected [20356.267625] usb 3-4: GSM modem (1-port) converter now attached to ttyUSB2 [20356.349844] FAT-fs (sdb): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [20964.076229] perf: interrupt took too long (3203 > 3165), lowering kernel.perf_event_max_sample_rate to 62250 [21458.457197] sdb: detected capacity change from 1203765248 to 0 [21472.520433] usb 3-4: USB disconnect, device number 10 [21472.520825] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [21472.520872] option 3-4:1.0: device disconnected [21472.524256] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [21472.524295] option 3-4:1.1: device disconnected [21472.524856] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 [21472.524888] option 3-4:1.2: device disconnected [26381.306516] perf: interrupt took too long (4022 > 4003), lowering kernel.perf_event_max_sample_rate to 49500 [33381.700823] perf: interrupt took too long (5051 > 5027), lowering kernel.perf_event_max_sample_rate to 39500 [33441.979687] usb 3-4: new high-speed USB device number 11 using xhci_hcd [33442.128748] usb 3-4: New USB device found, idVendor=1c9e, idProduct=9e08 [33442.128753] usb 3-4: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [33442.128756] usb 3-4: Product: PAP5300 DUO [33442.128758] usb 3-4: Manufacturer: LongCheer Incorporated [33442.128761] usb 3-4: SerialNumber: PAP5300DUO [33442.129759] usb-storage 3-4:1.0: USB Mass Storage device detected [33442.129934] scsi host5: usb-storage 3-4:1.0 [33442.130283] usb-storage 3-4:1.1: USB Mass Storage device detected [33442.130389] scsi host6: usb-storage 3-4:1.1 [33443.148221] scsi 6:0:0:0: CD-ROM USBModem Disk 2.31 PQ: 0 ANSI: 2 [33443.148615] scsi 5:0:0:0: Direct-Access PAP5300 DUO MS 2.31 PQ: 0 ANSI: 2 [33443.148826] scsi 5:0:0:1: Direct-Access PAP5300 DUO MS 2.31 PQ: 0 ANSI: 2 [33443.148898] sr 6:0:0:0: Power-on or device reset occurred [33443.258831] sr 6:0:0:0: [sr1] scsi-1 drive [33443.260379] sr 6:0:0:0: Attached scsi CD-ROM sr1 [33443.261684] sr 6:0:0:0: Attached scsi generic sg2 type 5 [33443.262440] sd 5:0:0:0: Attached scsi generic sg3 type 0 [33443.262817] sd 5:0:0:0: Power-on or device reset occurred [33443.262952] sd 5:0:0:1: Attached scsi generic sg4 type 0 [33443.263300] sd 5:0:0:1: Power-on or device reset occurred [33443.265375] sd 5:0:0:0: [sdb] Attached SCSI removable disk [33443.265571] sd 5:0:0:1: [sdc] Attached SCSI removable disk [33444.211927] usb 3-4: reset high-speed USB device number 11 using xhci_hcd [33444.360003] usb 3-4: device firmware changed [33444.360171] usb 3-4: USB disconnect, device number 11 [33444.416377] scsi 6:0:0:0: rejecting I/O to offline device [33444.416383] scsi 6:0:0:0: killing request [33444.563721] usb 3-4: new high-speed USB device number 12 using xhci_hcd [33444.713367] usb 3-4: New USB device found, idVendor=1c9e, idProduct=9e17 [33444.713373] usb 3-4: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [33444.713377] usb 3-4: Product: PAP5300 DUO [33444.713380] usb 3-4: Manufacturer: LongCheer Incorporated [33444.713383] usb 3-4: SerialNumber: PAP5300DUO [33444.714687] option 3-4:1.0: GSM modem (1-port) converter detected [33444.714935] usb 3-4: GSM modem (1-port) converter now attached to ttyUSB0 [33444.715133] option 3-4:1.1: GSM modem (1-port) converter detected [33444.715469] usb 3-4: GSM modem (1-port) converter now attached to ttyUSB1 [33444.715669] option 3-4:1.2: GSM modem (1-port) converter detected [33444.719467] usb 3-4: GSM modem (1-port) converter now attached to ttyUSB2 [33444.720318] usb-storage 3-4:1.3: USB Mass Storage device detected [33444.724243] scsi host6: usb-storage 3-4:1.3 [33445.740475] scsi 6:0:0:0: Direct-Access PAP5300 DUO MS 2.31 PQ: 0 ANSI: 2 [33445.740996] scsi 6:0:0:1: Direct-Access PAP5300 DUO MS 2.31 PQ: 0 ANSI: 2 [33445.743189] sd 6:0:0:0: Attached scsi generic sg2 type 0 [33445.745902] sd 6:0:0:1: Attached scsi generic sg3 type 0 [33445.747000] sd 6:0:0:0: Power-on or device reset occurred [33445.747381] sd 6:0:0:1: Power-on or device reset occurred [33445.750357] sd 6:0:0:0: [sdb] Attached SCSI removable disk [33445.751059] sd 6:0:0:1: [sdc] Attached SCSI removable disk [33451.886510] sd 6:0:0:0: [sdb] 2351104 512-byte logical blocks: (1.20 GB/1.12 GiB) [33452.099233] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [33452.322293] sdb: [33452.713827] FAT-fs (sdb): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [33671.955772] sdb: detected capacity change from 1203765248 to 0 [33684.681975] usb 3-4: USB disconnect, device number 12 [33684.682316] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [33684.682360] option 3-4:1.0: device disconnected [33684.684427] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [33684.684472] option 3-4:1.1: device disconnected [33684.690126] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 [33684.690167] option 3-4:1.2: device disconnected pierre@pierre-MS-AE6311:~$ |
(Themenstarter)
Anmeldungsdatum: Beiträge: 11 |
Ursache nach langer Recherche gefunden: ALSA und Skype sind nicht uneingeschränkt kompatibel. Im Wiki-Artikel https://wiki.ubuntuusers.de/Skype_f%C3%BCr_Linux/ ist beschrieben, dass Skype ALSA und PulsAudio braucht. Beides ist in Ubuntu Beaver standardmäßig installiert. Doch, wenn Skype nicht läuft, ruckelt es auch nicht mehr. |
« Vorherige1Nächste »
Antworten |