Hallo zusammen,
ich hoffe, ich bin mit meinem Thema an dieser Stelle richtig. Ich bekomme seit längerem beim Start von Ubuntu die Fehlermeldung: "Entschuldigung, Ubuntu hat einen internen Fehler festgestellt...". Aufgrund der Einträge im Crash-Dump tippe ich auf ein Problem mit der Grafikkarte. Da ich den Crash-Dump nicht editieren konnte, habe ich Screenshots mit der Meldung erstellt und angefügt.
Könnt Ihr mir einen Tipp geben? Muss ich ggf. die Treiber aktualisieren? Ich bin bei Linux leider nicht so bewandert, wie das funktioniert. Schon mal besten Dank im Voraus für Eure Hilfe
Anbei nun noch wie gewünscht weitere Angaben:
Rechner:
System Information Manufacturer: FUJITSU Product Name: LIFEBOOK AH531
Grafikkarte:
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) Subsystem: Fujitsu Limited. 2nd Generation Core Processor Family Integrated Graphics Controller [10cf:15ea] Kernel driver in use: i915 Kernel modules: i915
Angewandte und verfügbare Auflösungen:
Screen 0: minimum 8 x 8, current 1366 x 768, maximum 32767 x 32767 LVDS1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 193mm EDID: 00ffffffffffff000daf911500000000 35130103802313780a07f59a574e8726 1e505400000001010101010101010101 010101010101121b5664500014301022 260058c110000018000000fe004e3135 3642362d4c30410a2020000000fe0043 4d4f0a202020202020202020000000fe 004e31353642362d4c30410a20200023 BACKLIGHT: 11 range: (0, 11) Backlight: 11 range: (0, 11) scaling mode: Full aspect supported: None, Full, Center, Full aspect 1366x768 59.99*+ 1360x768 59.80 59.96 1280x720 60.00 1024x768 60.00 1024x576 60.00 960x540 60.00 800x600 60.32 56.25 864x486 60.00 640x480 59.94 720x405 60.00 680x384 60.00 640x360 60.00 DP1 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Automatic supported: Automatic, Full, Limited 16:235 audio: auto supported: force-dvi, off, auto, on HDMI1 disconnected (normal left inverted right x axis y axis) aspect ratio: Automatic supported: Automatic, 4:3, 16:9 Broadcast RGB: Automatic supported: Automatic, Full, Limited 16:235 audio: auto supported: force-dvi, off, auto, on VGA1 disconnected (normal left inverted right x axis y axis) VIRTUAL1 disconnected (normal left inverted right x axis y axis)
Xorg.0.log
[ 164.261] X.Org X Server 1.18.4 Release Date: 2016-07-19 [ 164.261] X Protocol Version 11, Revision 0 [ 164.261] Build Operating System: Linux 4.4.0-97-generic x86_64 Ubuntu [ 164.261] Current Operating System: Linux robi-LIFEBOOK-AH531 4.4.0-130-generic #156-Ubuntu SMP Thu Jun 14 08:53:28 UTC 2018 x86_64 [ 164.261] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-130-generic root=UUID=b2b7fdac-bb55-4943-98a1-2489702b4951 ro quiet splash vt.handoff=7 [ 164.261] Build Date: 13 October 2017 01:57:05PM [ 164.261] xorg-server 2:1.18.4-0ubuntu0.7 (For technical support please see http://www.ubuntu.com/support) [ 164.261] Current version of pixman: 0.33.6 [ 164.261] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 164.261] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 164.261] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 9 20:37:36 2018 [ 164.316] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 164.557] (==) No Layout section. Using the first Screen section. [ 164.557] (==) No screen section available. Using defaults. [ 164.557] (**) |-->Screen "Default Screen Section" (0) [ 164.557] (**) | |-->Monitor "<default monitor>" [ 164.586] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 164.586] (==) Automatically adding devices [ 164.586] (==) Automatically enabling devices [ 164.586] (==) Automatically adding GPU devices [ 164.586] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 164.586] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 164.586] Entry deleted from font path. [ 164.586] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 164.586] Entry deleted from font path. [ 164.586] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 164.586] Entry deleted from font path. [ 164.586] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 164.586] Entry deleted from font path. [ 164.586] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 164.586] Entry deleted from font path. [ 164.586] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 164.586] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 164.586] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 164.586] (II) Loader magic: 0x555a6c2a5dc0 [ 164.586] (II) Module ABI versions: [ 164.586] X.Org ANSI C Emulation: 0.4 [ 164.586] X.Org Video Driver: 20.0 [ 164.586] X.Org XInput driver : 22.1 [ 164.586] X.Org Server Extension : 9.0 [ 164.587] (++) using VT number 7 [ 164.587] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 164.588] (II) xfree86: Adding drm device (/dev/dri/card0) [ 164.588] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied [ 164.588] (II) config/udev: Ignoring already known drm device (/dev/dri/card0) [ 164.589] (--) PCI:*(0:0:2:0) 8086:0116:10cf:15ea rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64 [ 164.589] (II) LoadModule: "glx" [ 164.738] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 169.778] (II) Module glx: vendor="X.Org Foundation" [ 169.778] compiled for 1.18.4, module version = 1.0.0 [ 169.778] ABI class: X.Org Server Extension, version 9.0 [ 169.778] (==) AIGLX enabled [ 169.778] (==) Matched intel as autoconfigured driver 0 [ 169.778] (==) Matched modesetting as autoconfigured driver 1 [ 169.778] (==) Matched fbdev as autoconfigured driver 2 [ 169.778] (==) Matched vesa as autoconfigured driver 3 [ 169.778] (==) Assigned the driver to the xf86ConfigLayout [ 169.778] (II) LoadModule: "intel" [ 169.778] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 170.290] (II) Module intel: vendor="X.Org Foundation" [ 170.290] compiled for 1.18.4, module version = 2.99.917 [ 170.290] Module class: X.Org Video Driver [ 170.290] ABI class: X.Org Video Driver, version 20.0 [ 170.290] (II) LoadModule: "modesetting" [ 170.290] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 170.425] (II) Module modesetting: vendor="X.Org Foundation" [ 170.425] compiled for 1.18.4, module version = 1.18.4 [ 170.425] Module class: X.Org Video Driver [ 170.425] ABI class: X.Org Video Driver, version 20.0 [ 170.425] (II) LoadModule: "fbdev" [ 170.425] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 170.474] (II) Module fbdev: vendor="X.Org Foundation" [ 170.474] compiled for 1.18.1, module version = 0.4.4 [ 170.474] Module class: X.Org Video Driver [ 170.474] ABI class: X.Org Video Driver, version 20.0 [ 170.474] (II) LoadModule: "vesa" [ 170.474] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 170.498] (II) Module vesa: vendor="X.Org Foundation" [ 170.498] compiled for 1.18.1, module version = 2.3.4 [ 170.498] Module class: X.Org Video Driver [ 170.498] ABI class: X.Org Video Driver, version 20.0 [ 170.498] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 170.499] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000 [ 170.499] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100 [ 170.499] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300 [ 170.499] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 170.499] (II) FBDEV: driver for framebuffer: fbdev [ 170.499] (II) VESA: driver for VESA chipsets: vesa [ 170.548] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20151010 [ 170.548] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1.2 (Timo Aaltonen <tjaalton@debian.org>) [ 170.548] (II) intel(0): SNA compiled for use with valgrind [ 170.562] (WW) Falling back to old probe method for modesetting [ 170.562] (WW) Falling back to old probe method for fbdev [ 170.562] (II) Loading sub module "fbdevhw" [ 170.562] (II) LoadModule: "fbdevhw" [ 170.562] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 170.588] (II) Module fbdevhw: vendor="X.Org Foundation" [ 170.588] compiled for 1.18.4, module version = 0.0.2 [ 170.588] ABI class: X.Org Video Driver, version 20.0 [ 170.588] (WW) Falling back to old probe method for vesa [ 170.613] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000 [ 170.613] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 2 threads [ 170.613] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 170.613] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 170.613] (==) intel(0): RGB weight 888 [ 170.613] (==) intel(0): Default visual is TrueColor [ 170.613] (II) intel(0): Output LVDS1 has no monitor section [ 170.632] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1 [ 170.632] (II) intel(0): Enabled output LVDS1 [ 170.632] (II) intel(0): Output VGA1 has no monitor section [ 170.632] (II) intel(0): Enabled output VGA1 [ 170.632] (II) intel(0): Output HDMI1 has no monitor section [ 170.632] (II) intel(0): Enabled output HDMI1 [ 170.632] (II) intel(0): Output DP1 has no monitor section [ 170.632] (II) intel(0): Enabled output DP1 [ 170.632] (--) intel(0): Using a maximum size of 256x256 for hardware cursors [ 170.632] (II) intel(0): Output VIRTUAL1 has no monitor section [ 170.632] (II) intel(0): Enabled output VIRTUAL1 [ 170.632] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0 [ 170.632] (==) intel(0): TearFree disabled [ 170.632] (==) intel(0): DPI set to (96, 96) [ 170.632] (II) Loading sub module "dri2" [ 170.632] (II) LoadModule: "dri2" [ 170.632] (II) Module "dri2" already built-in [ 170.632] (II) Loading sub module "present" [ 170.632] (II) LoadModule: "present" [ 170.632] (II) Module "present" already built-in [ 170.632] (II) UnloadModule: "modesetting" [ 170.632] (II) Unloading modesetting [ 170.632] (II) UnloadModule: "fbdev" [ 170.632] (II) Unloading fbdev [ 170.632] (II) UnloadSubModule: "fbdevhw" [ 170.632] (II) Unloading fbdevhw [ 170.632] (II) UnloadModule: "vesa" [ 170.632] (II) Unloading vesa [ 170.633] (==) Depth 24 pixmap format is 32 bpp [ 170.926] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend [ 170.926] (==) intel(0): Backing store enabled [ 170.926] (==) intel(0): Silken mouse enabled [ 170.948] (II) intel(0): HW Cursor enabled [ 170.948] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 170.959] (==) intel(0): DPMS enabled [ 170.960] (==) intel(0): Display hotplug detection enabled [ 170.960] (II) intel(0): [DRI2] Setup complete [ 170.960] (II) intel(0): [DRI2] DRI driver: i965 [ 170.960] (II) intel(0): [DRI2] VDPAU driver: va_gl [ 170.960] (II) intel(0): direct rendering: DRI2 enabled [ 170.960] (II) intel(0): hardware support for Present enabled [ 170.960] (--) RandR disabled [ 170.967] (II) SELinux: Disabled on system [ 172.625] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 172.625] (II) AIGLX: enabled GLX_ARB_create_context [ 172.625] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 172.625] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile [ 172.625] (II) AIGLX: enabled GLX_INTEL_swap_event [ 172.625] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 172.625] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 172.625] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 172.625] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float [ 172.625] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 172.625] (II) AIGLX: enabled GLX_ARB_create_context_robustness [ 172.625] (II) AIGLX: Loaded and initialized i965 [ 172.625] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 172.732] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none [ 172.732] (II) intel(0): Setting screen physical size to 361 x 203 [ 175.214] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 175.214] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 175.214] (II) LoadModule: "evdev" [ 175.214] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 175.729] (II) Module evdev: vendor="X.Org Foundation" [ 175.729] compiled for 1.18.1, module version = 2.10.1 [ 175.729] Module class: X.Org XInput Driver [ 175.729] ABI class: X.Org XInput driver, version 22.1 [ 175.729] (II) Using input driver 'evdev' for 'Power Button' [ 175.729] (**) Power Button: always reports core events [ 175.729] (**) evdev: Power Button: Device: "/dev/input/event2" [ 175.729] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 175.729] (--) evdev: Power Button: Found keys [ 175.729] (II) evdev: Power Button: Configuring as keyboard [ 175.729] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 175.729] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 175.729] (**) Option "xkb_rules" "evdev" [ 175.729] (**) Option "xkb_model" "pc105" [ 175.729] (**) Option "xkb_layout" "de" [ 175.879] (II) config/udev: Adding input device Fujitsu FUJ02E3 (/dev/input/event7) [ 175.879] (**) Fujitsu FUJ02E3: Applying InputClass "evdev keyboard catchall" [ 175.879] (II) Using input driver 'evdev' for 'Fujitsu FUJ02E3' [ 175.879] (**) Fujitsu FUJ02E3: always reports core events [ 175.879] (**) evdev: Fujitsu FUJ02E3: Device: "/dev/input/event7" [ 175.879] (--) evdev: Fujitsu FUJ02E3: Vendor 0 Product 0x6 [ 175.879] (--) evdev: Fujitsu FUJ02E3: Found keys [ 175.879] (II) evdev: Fujitsu FUJ02E3: Configuring as keyboard [ 175.879] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/FUJ02E3:00/input/input14/event7" [ 175.879] (II) XINPUT: Adding extended input device "Fujitsu FUJ02E3" (type: KEYBOARD, id 7) [ 175.879] (**) Option "xkb_rules" "evdev" [ 175.879] (**) Option "xkb_model" "pc105" [ 175.879] (**) Option "xkb_layout" "de" [ 175.880] (II) config/udev: Adding input device Video Bus (/dev/input/event4) [ 175.880] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 175.880] (II) Using input driver 'evdev' for 'Video Bus' [ 175.880] (**) Video Bus: always reports core events [ 175.880] (**) evdev: Video Bus: Device: "/dev/input/event4" [ 175.880] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 175.880] (--) evdev: Video Bus: Found keys [ 175.880] (II) evdev: Video Bus: Configuring as keyboard [ 175.880] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10/event4" [ 175.880] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8) [ 175.880] (**) Option "xkb_rules" "evdev" [ 175.880] (**) Option "xkb_model" "pc105" [ 175.880] (**) Option "xkb_layout" "de" [ 175.881] (II) config/udev: Adding input device Fujitsu FUJ02B1 (/dev/input/event6) [ 175.881] (**) Fujitsu FUJ02B1: Applying InputClass "evdev keyboard catchall" [ 175.881] (II) Using input driver 'evdev' for 'Fujitsu FUJ02B1' [ 175.881] (**) Fujitsu FUJ02B1: always reports core events [ 175.881] (**) evdev: Fujitsu FUJ02B1: Device: "/dev/input/event6" [ 175.881] (--) evdev: Fujitsu FUJ02B1: Vendor 0 Product 0x6 [ 175.881] (--) evdev: Fujitsu FUJ02B1: Found keys [ 175.881] (II) evdev: Fujitsu FUJ02B1: Configuring as keyboard [ 175.881] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/FUJ02B1:00/input/input13/event6" [ 175.881] (II) XINPUT: Adding extended input device "Fujitsu FUJ02B1" (type: KEYBOARD, id 9) [ 175.881] (**) Option "xkb_rules" "evdev" [ 175.881] (**) Option "xkb_model" "pc105" [ 175.881] (**) Option "xkb_layout" "de" [ 175.882] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 175.882] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 175.882] (II) Using input driver 'evdev' for 'Power Button' [ 175.882] (**) Power Button: always reports core events [ 175.882] (**) evdev: Power Button: Device: "/dev/input/event0" [ 175.882] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 175.882] (--) evdev: Power Button: Found keys [ 175.882] (II) evdev: Power Button: Configuring as keyboard [ 175.882] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0" [ 175.882] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 10) [ 175.882] (**) Option "xkb_rules" "evdev" [ 175.882] (**) Option "xkb_model" "pc105" [ 175.882] (**) Option "xkb_layout" "de" [ 175.882] (II) config/udev: Adding input device Lid Switch (/dev/input/event1) [ 175.883] (II) No input driver specified, ignoring this device. [ 175.883] (II) This device may have been added with another device file. [ 175.883] (II) config/udev: Adding drm device (/dev/dri/card0) [ 175.883] (II) xfree86: Adding drm device (/dev/dri/card0) [ 175.883] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied [ 175.883] (II) config/udev: Ignoring already known drm device (/dev/dri/card0) [ 175.883] (II) config/udev: Adding input device FJ Camera (/dev/input/event11) [ 175.883] (**) FJ Camera: Applying InputClass "evdev keyboard catchall" [ 175.883] (II) Using input driver 'evdev' for 'FJ Camera' [ 175.884] (**) FJ Camera: always reports core events [ 175.884] (**) evdev: FJ Camera: Device: "/dev/input/event11" [ 175.884] (--) evdev: FJ Camera: Vendor 0x4f2 Product 0xb213 [ 175.884] (--) evdev: FJ Camera: Found keys [ 175.884] (II) evdev: FJ Camera: Configuring as keyboard [ 175.884] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input18/event11" [ 175.884] (II) XINPUT: Adding extended input device "FJ Camera" (type: KEYBOARD, id 11) [ 175.884] (**) Option "xkb_rules" "evdev" [ 175.884] (**) Option "xkb_model" "pc105" [ 175.884] (**) Option "xkb_layout" "de" [ 175.884] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8) [ 175.884] (II) No input driver specified, ignoring this device. [ 175.884] (II) This device may have been added with another device file. [ 175.885] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event9) [ 175.885] (II) No input driver specified, ignoring this device. [ 175.885] (II) This device may have been added with another device file. [ 175.885] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10) [ 175.885] (II) No input driver specified, ignoring this device. [ 175.885] (II) This device may have been added with another device file. [ 175.885] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) [ 175.885] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 175.885] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 175.885] (**) AT Translated Set 2 keyboard: always reports core events [ 175.885] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3" [ 175.885] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 175.885] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 175.886] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 175.886] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3" [ 175.886] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12) [ 175.886] (**) Option "xkb_rules" "evdev" [ 175.886] (**) Option "xkb_model" "pc105" [ 175.886] (**) Option "xkb_layout" "de" [ 175.886] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5) [ 175.886] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 175.886] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchscreen catchall" [ 175.886] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 175.886] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons" [ 175.886] (II) LoadModule: "synaptics" [ 175.886] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 176.598] (II) Module synaptics: vendor="X.Org Foundation" [ 176.598] compiled for 1.18.1, module version = 1.8.2 [ 176.598] Module class: X.Org XInput Driver [ 176.598] ABI class: X.Org XInput driver, version 22.1 [ 176.598] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 176.598] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 176.598] (**) Option "Device" "/dev/input/event5" [ 176.648] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device [ 176.648] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5682 (res 55) [ 176.648] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4692 (res 98) [ 176.648] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 176.648] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15 [ 176.648] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple scroll-buttons [ 176.648] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 176.648] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 176.648] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 176.672] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input9/event5" [ 176.672] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13) [ 176.672] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 [ 176.672] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75 [ 176.672] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.037 [ 176.672] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 176.672] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 176.672] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 176.672] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 176.672] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 176.672] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0) [ 176.672] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates" [ 176.755] (II) intel(0): EDID vendor "CMO", prod id 5521 [ 176.755] (II) intel(0): Printing DDC gathered Modelines: [ 176.755] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP) [ 2615.434] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse1) [ 2615.522] (II) No input driver specified, ignoring this device. [ 2615.522] (II) This device may have been added with another device file. [ 2615.620] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event12) [ 2615.620] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 2615.620] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse' [ 2615.620] (**) Logitech USB Optical Mouse: always reports core events [ 2615.620] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event12" [ 2615.703] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05d [ 2615.703] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons [ 2615.703] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s) [ 2615.703] (--) evdev: Logitech USB Optical Mouse: Found relative axes [ 2615.703] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes [ 2615.734] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse [ 2615.734] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support [ 2615.734] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 2615.734] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 2615.734] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:046D:C05D.0001/input/input19/event12" [ 2615.734] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 14) [ 2615.735] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes. [ 2615.737] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 2615.737] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0 [ 2615.737] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000 [ 2615.737] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
Eine xorg.conf ist nicht vorhanden.