wolfgang1939
(Themenstarter)
Anmeldungsdatum: 28. November 2009
Beiträge: 700
Wohnort: Nürnberg
|
wolfgang@wolfgang-MS-7800:~$ brsaneconfig4 -a name=Netzwerkscanner model=DCP-J562DW nodename=192.168.2.100
"Netzwerkscanner" is already registered.
wolfgang@wolfgang-MS-7800:~$ brsaneconfig4 -d
-----------------------------
cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=1dbd769e-5f2b-4c38-881c-f96546dd1810 / ext4 errors=remount-ro 0 1
/swapfile none swap sw 0 0
-----------------------------
sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
could not open USB device 0x1d6b/0x0001 at 005:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 002:001: Access denied (insufficient permissions)
could not open USB device 0x046a/0x0023 at 004:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 004:001: Access denied (insufficient permissions)
could not open USB device 0x13d3/0x3306 at 001:003: Access denied (insufficient permissions)
could not open USB device 0x0bda/0x0184 at 001:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions)
could not open USB device 0x192f/0x0916 at 003:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 003:001: Access denied (insufficient permissions)
could not open USB device 0x0480/0xa202 at 009:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0003 at 009:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 008:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0003 at 007:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 006:001: Access denied (insufficient permissions)
# No USB scanners found. If you expected something different, make sure that
# you have loaded a kernel driver for your USB host controller and have setup
# the USB system correctly. See man sane-usb for details.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
-----------------------------
ls -R -all /proc/bus/usb
ls: Zugriff auf '/proc/bus/usb' nicht möglich: Datei oder Verzeichnis nicht gefunden
-----------------------------
cat /proc/bus/usb/devices
cat: /proc/bus/usb/devices: Datei oder Verzeichnis nicht gefunden
-----------------------------
scanimage -L
device `brother4:net1;dev0' is a Brother Netzwerkscanner DCP-J562DW
-----------------------------
-----------------------------
/etc/opt/brother/scanner/brscan4//brsanenetdevice4.cfg:
-----------------------------
/etc/opt/brother/scanner/brscan4//Brsane4.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_1.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_4.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_6.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_7.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_19.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_21.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_22.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_3.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_15.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_11.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_5.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_18.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_9.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_8.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_14.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_20.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_17.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_2.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_16.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_12.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_10.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_13.ini:
-----------------------------
-----------------------------
ping
test Netzwerkscanner
ping 192.168.2.100 -w 10
PING 192.168.2.100 (192.168.2.100) 56(84) bytes of data.
From 192.168.2.104 icmp_seq=1 Destination Host Unreachable
From 192.168.2.104 icmp_seq=2 Destination Host Unreachable
From 192.168.2.104 icmp_seq=3 Destination Host Unreachable
--- 192.168.2.100 ping statistics ---
4 packets transmitted, 0 received, +3 errors, 100% packet loss, time 3071ms
pipe 4
wolfgang@wolfgang-MS-7800:~$
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Funktioniert beides 😉 Aber die IP stimmt wohl nicht ping
test Netzwerkscanner
ping 192.168.2.100 -w 10
PING 192.168.2.100 (192.168.2.100) 56(84) bytes of data.
From 192.168.2.104 icmp_seq=1 Destination Host Unreachable
From 192.168.2.104 icmp_seq=2 Destination Host Unreachable
From 192.168.2.104 icmp_seq=3 Destination Host Unreachable
--- 192.168.2.100 ping statistics ---
4 packets transmitted, 0 received, +3 errors, 100% packet loss, time 3071ms
pipe 4 Mal sehen welche IP verwendet wird,zeige mal (vom Drucker) lpinfo -l -v
|
wolfgang1939
(Themenstarter)
Anmeldungsdatum: 28. November 2009
Beiträge: 700
Wohnort: Nürnberg
|
Der Brother DCP-J562DW Ist eingeschaltet. wolfgang@wolfgang-MS-7800:~$ lpinfo -l -v
Device: uri = lpd
class = network
info = LPD/LPR-Host oder -Drucker
make-and-model = Unknown
device-id =
location =
Device: uri = cups-brf:/
class = file
info = CUPS-BRF
make-and-model = Virtual Braille BRF Printer
device-id = MFG:Generic;MDL:CUPS-BRF Printer;DES:Generic CUPS-BRF Printer;CLS:PRINTER;CMD:BRF;
location =
Device: uri = boomaga:/
class = file
info = Boomaga
make-and-model = Boomaga printer
device-id = MFG:Generic;CMD:PJL,PDF;MDL:Boomaga printer;CLS:PRINTER;DES:Virtual boomaga printer;DRV:DPDF,R1,M0;
location =
Device: uri = ipps
class = network
info = Internet Printing Protocol (ipps)
make-and-model = Unknown
device-id =
location =
Device: uri = beh
class = network
info = Backend Error Handler
make-and-model = Unknown
device-id =
location =
Device: uri = cups-pdf:/
class = file
info = CUPS-PDF
make-and-model = Virtual PDF Printer
device-id = MFG:Generic;MDL:CUPS-PDF Printer;DES:Generic CUPS-PDF Printer;CLS:PRINTER;CMD:POSTSCRIPT;
location =
Device: uri = http
class = network
info = Internet Printing Protocol (http)
make-and-model = Unknown
device-id =
location =
Device: uri = socket
class = network
info = AppSocket/HP JetDirect
make-and-model = Unknown
device-id =
location =
Device: uri = https
class = network
info = Internet Printing Protocol (https)
make-and-model = Unknown
device-id =
location =
Device: uri = ipp
class = network
info = Internet Printing Protocol (ipp)
make-and-model = Unknown
device-id =
location =
Device: uri = hp
class = direct
info = HP Printer (HPLIP)
make-and-model = Unknown
device-id =
location =
Device: uri = smb
class = network
info = Windows Printer via SAMBA
make-and-model = Unknown
device-id =
location =
Device: uri = hpfax
class = direct
info = HP Fax (HPLIP)
make-and-model = Unknown
device-id =
location =
Device: uri = dnssd://Brother%20DCP-J562DW._ipp._tcp.local/?uuid=e3248000-80ce-11db-8000-40b89ac8e9f5
class = network
info = Brother DCP-J562DW
make-and-model = Brother DCP-J562DW
device-id = MFG:Brother;MDL:DCP-J562DW;CMD:HBP,BRPJL,URF;
location =
Device: uri = lpd://BRW40B89AC8E9F5/BINARY_P1
class = network
info = Brother DCP-J562DW
make-and-model = Brother DCP-J562DW
device-id = MFG:Brother;CMD:HBP,BRPJL,URF;MDL:DCP-J562DW;CLS:PRINTER;CID:Brother Generic Jpeg Type2;URF:SRGB24,W8,CP1,IS1,MT1-8-11,OB9,PQ4-5,RS300,OFU0,V1.4,DM3;
location =
Device: uri = ipp://BRW40B89AC8E9F5.local:631/ipp/print
class = network
info = Brother DCP-J562DW (driverless)
make-and-model = Brother DCP-J562DW
device-id = MFG:Brother;MDL:DCP-J562DW;CMD:PWGRaster,AppleRaster,PWG,URF,JPEG;
location =
wolfgang@wolfgang-MS-7800:~$
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Das war es nicht,zeige mal brscan-skey -l
|
wolfgang1939
(Themenstarter)
Anmeldungsdatum: 28. November 2009
Beiträge: 700
Wohnort: Nürnberg
|
wolfgang@wolfgang-MS-7800:~$ brscan-skey -l
Netzwerkscanner : brother4:net1;dev0 : 192.168.2.100 Active
wolfgang@wolfgang-MS-7800:~$
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Hmm,IP übernimmt er jetzt wohl.Also zuerst brsaneconfig4 -r Netzwerkscanner dann brsaneconfig4 -a name=BR-Scan model=DCP-J562DW ip=192.168.2.100 danach nochmal brsaneconfig4 -d Falls Scannen immer noch nicht geht,als letztes brsaneconfig4 -r BR-Scan dann brsaneconfig4 -a name=Netzwerkscanner model=DCP-J562DW nodename=BRW40B89AC8E9F5.local Scannen wieder Testen.Ansonsten am Gerät ermitteln https://wiki.ubuntuusers.de/Scanner/Brother/#Am-Geraet-selbst Vielleicht kommen Bourness und Frieder108 ja nochmal zur Hilfe wenn es immer noch nicht klappen sollte 😛
|
wolfgang1939
(Themenstarter)
Anmeldungsdatum: 28. November 2009
Beiträge: 700
Wohnort: Nürnberg
|
Kellerkind_2009: Falls Scannen immer noch nicht geht,als letztes
Nein, das Scannen funktioniert jetzt einwandfrei. Das Drucken funktioniert auch. Ich kann ja bis morgen noch einmal überprüfen. Ich danke Euch noch einmal für die Hilfe. Ich hatte mich gestern schon bedankt, weil scannen und drucken wieder funktioniert. Ich hatte da wohl nicht deutlich geschrieben, dass der Erfolg da ist. Morgen kennzeichne ich den Beitrag als gelöst. Gruß Wolfgang
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Das freut einen doch 👍 Zeige bitte zum Abschluss noch mal sudo apt-get -f install && sudo apt-get update && sudo apt-get dist-upgrade sowie cat /opt/brother/scanner/brscan4/brsanenetdevice4.cfg
|
wolfgang1939
(Themenstarter)
Anmeldungsdatum: 28. November 2009
Beiträge: 700
Wohnort: Nürnberg
|
wolfgang@wolfgang-MS-7800:~$ sudo apt-get -f install && sudo apt-get update && sudo apt-get dist-upgrade
[sudo] Passwort für wolfgang:
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 29 nicht aktualisiert.
1 nicht vollständig installiert oder entfernt.
Nach dieser Operation werden 0 B Plattenplatz zusätzlich benutzt.
brother-udev-rule-type1 (1.0.0-1) wird eingerichtet ...
/var/lib/dpkg/info/brother-udev-rule-type1.postinst: 3: /var/lib/dpkg/info/brother-udev-rule-type1.postinst: /opt/brother/scanner/udev-rules/type1/install: not found
dpkg: Fehler beim Bearbeiten des Paketes brother-udev-rule-type1 (--configure):
Unterprozess installed brother-udev-rule-type1 package post-installation script gab den Fehler-Ausgangsstatus 127 zurück
Fehler traten auf beim Bearbeiten von:
brother-udev-rule-type1
E: Sub-process /usr/bin/dpkg returned an error code (1)
wolfgang@wolfgang-MS-7800:~$ cat /opt/brother/scanner/brscan4/brsanenetdevice4.cfg
DEVICE=Netzwerkscanner , "DCP-J562DW" , 0x4f9:0x380 , NODENAME=192.168.2.100
wolfgang@wolfgang-MS-7800:~$
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Das würde ich gerne noch abstellen 😉 Zeige dpkg -l brother-udev-rule-type1 sowie locate brother-udev
|
wolfgang1939
(Themenstarter)
Anmeldungsdatum: 28. November 2009
Beiträge: 700
Wohnort: Nürnberg
|
wolfgang@wolfgang-MS-7800:~$ dpkg -l brother-udev-rule-type1
Gewünscht=Unbekannt/Installieren/R=Entfernen/P=Vollständig Löschen/Halten
| Status=Nicht/Installiert/Config/U=Entpackt/halb konFiguriert/
Halb installiert/Trigger erWartet/Trigger anhängig
|/ Fehler?=(kein)/R=Neuinstallation notwendig (Status, Fehler: GROSS=schlecht)
||/ Name Version Architektur Beschreibung
+++-==============-============-============-=================================
iF brother-udev-r 1.0.0-1 all Brother udev rule type 1
wolfgang@wolfgang-MS-7800:~$ locate brother-udev
/var/lib/dpkg/info/brother-udev-rule-type1.conffiles
/var/lib/dpkg/info/brother-udev-rule-type1.list
/var/lib/dpkg/info/brother-udev-rule-type1.md5sums
/var/lib/dpkg/info/brother-udev-rule-type1.postinst
/var/lib/dpkg/info/brother-udev-rule-type1.prerm
wolfgang@wolfgang-MS-7800:~$
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Mal sehen sudo apt-get -o Dpkg::Options::="--force-remove-reinstreq" purge brother-udev-rule-type1
|
wolfgang1939
(Themenstarter)
Anmeldungsdatum: 28. November 2009
Beiträge: 700
Wohnort: Nürnberg
|
wolfgang@wolfgang-MS-7800:~$ sudo apt-get -o Dpkg::Options::="--force-remove-reinstreq" purge brother-udev-rule-type1
[sudo] Passwort für wolfgang:
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Die folgenden Pakete werden ENTFERNT:
brother-udev-rule-type1*
0 aktualisiert, 0 neu installiert, 1 zu entfernen und 29 nicht aktualisiert.
1 nicht vollständig installiert oder entfernt.
Nach dieser Operation werden 0 B Plattenplatz zusätzlich benutzt.
Möchten Sie fortfahren? [J/n] J
(Lese Datenbank ... 253103 Dateien und Verzeichnisse sind derzeit installiert.)
Entfernen von brother-udev-rule-type1 (1.0.0-1) ...
/var/lib/dpkg/info/brother-udev-rule-type1.prerm: 3: /var/lib/dpkg/info/brother-udev-rule-type1.prerm: /opt/brother/scanner/udev-rules/type1/install: not found
dpkg: Fehler beim Bearbeiten des Paketes brother-udev-rule-type1 (--remove):
Unterprozess installed brother-udev-rule-type1 package pre-removal script gab den Fehler-Ausgangsstatus 127 zurück
/var/lib/dpkg/info/brother-udev-rule-type1.postinst: 3: /var/lib/dpkg/info/brother-udev-rule-type1.postinst: /opt/brother/scanner/udev-rules/type1/install: not found
dpkg: Fehler beim Aufräumen:
Unterprozess installed brother-udev-rule-type1 package post-installation script gab den Fehler-Ausgangsstatus 127 zurück
Fehler traten auf beim Bearbeiten von:
brother-udev-rule-type1
E: Sub-process /usr/bin/dpkg returned an error code (1)
wolfgang@wolfgang-MS-7800:~$
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Ok,dann eben so sudo rm /var/lib/dpkg/info/brother-udev-rule-type1* Dann cd ~/Brother-DCP-J562DW
sudo dpkg -i --force-overwrite brother-udev-rule-type1-1.0.2-0.all.deb Danach sollte es gut sein sudo apt-get -f install && sudo apt-get update && sudo apt-get dist-upgrade
|
wolfgang1939
(Themenstarter)
Anmeldungsdatum: 28. November 2009
Beiträge: 700
Wohnort: Nürnberg
|
wolfgang@wolfgang-MS-7800:~$ sudo rm /var/lib/dpkg/info/brother-udev-rule-type1*
[sudo] Passwort für wolfgang:
wolfgang@wolfgang-MS-7800:~$ cd ~/Brother-DCP-J562DW
wolfgang@wolfgang-MS-7800:~/Brother-DCP-J562DW$ sudo dpkg -i --force-overwrite brother-udev-rule-type1-1.0.2-0.all.deb
dpkg: Warnung: Dateilisten-Datei des Paketes »brother-udev-rule-type1« fehlt; es wird angenommen,
dass das Paket derzeit keine Dateien installiert hat
(Lese Datenbank ... 253100 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von brother-udev-rule-type1-1.0.2-0.all.deb ...
Entpacken von brother-udev-rule-type1 (1.0.2) über (1.0.0-1) ...
brother-udev-rule-type1 (1.0.2) wird eingerichtet ...
wolfgang@wolfgang-MS-7800:~/Brother-DCP-J562DW$ sudo apt-get -f install && sudo apt-get update && sudo apt-get dist-upgrade
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 29 nicht aktualisiert.
OK:1 http://de.archive.ubuntu.com/ubuntu bionic InRelease
Holen:2 http://security.ubuntu.com/ubuntu bionic-security InRelease [83,2 kB]
Holen:3 http://de.archive.ubuntu.com/ubuntu bionic-updates InRelease [88,7 kB]
Holen:4 http://de.archive.ubuntu.com/ubuntu bionic-backports InRelease [74,6 kB]
Holen:5 http://security.ubuntu.com/ubuntu bionic-security/main amd64 DEP-11 Metadata [204 B]
Holen:6 http://security.ubuntu.com/ubuntu bionic-security/universe amd64 DEP-11 Metadata [6.828 B]
Holen:7 http://security.ubuntu.com/ubuntu bionic-security/universe DEP-11 64x64 Icons [11,3 kB]
Holen:8 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 Packages [387 kB]
Holen:9 http://de.archive.ubuntu.com/ubuntu bionic-updates/main i386 Packages [351 kB]
Holen:10 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 DEP-11 Metadata [170 kB]
Holen:11 http://de.archive.ubuntu.com/ubuntu bionic-updates/main DEP-11 48x48 Icons [40,8 kB]
Holen:12 http://de.archive.ubuntu.com/ubuntu bionic-updates/main DEP-11 64x64 Icons [76,7 kB]
Holen:13 http://de.archive.ubuntu.com/ubuntu bionic-updates/universe amd64 Packages [537 kB]
Holen:14 http://de.archive.ubuntu.com/ubuntu bionic-updates/universe i386 Packages [537 kB]
Holen:15 http://de.archive.ubuntu.com/ubuntu bionic-updates/universe amd64 DEP-11 Metadata [183 kB]
Holen:16 http://de.archive.ubuntu.com/ubuntu bionic-updates/universe DEP-11 48x48 Icons [175 kB]
Holen:17 http://de.archive.ubuntu.com/ubuntu bionic-updates/universe DEP-11 64x64 Icons [285 kB]
Holen:18 http://de.archive.ubuntu.com/ubuntu bionic-updates/multiverse amd64 DEP-11 Metadata [2.468 B]
Holen:19 http://de.archive.ubuntu.com/ubuntu bionic-backports/universe amd64 DEP-11 Metadata [5.100 B]
Es wurden 3.015 kB in 5 s geholt (668 kB/s).
Paketlisten werden gelesen... Fertig
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Paketaktualisierung (Upgrade) wird berechnet... Fertig
Die folgenden Pakete werden aktualisiert (Upgrade):
apport apport-gtk binutils binutils-common binutils-x86-64-linux-gnu cpp
cpp-7 gcc-7-base gcc-8-base gdm3 gir1.2-gdm-1.0 lib32gcc1 lib32stdc++6
libbinutils libcc1-0 libgcc1 libgdm1 libgfortran4 libgomp1
libnautilus-extension1a libquadmath0 libstdc++6 nautilus nautilus-data
python3-apport python3-distupgrade python3-problem-report
ubuntu-release-upgrader-core ubuntu-release-upgrader-gtk
29 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
Es müssen 12,6 MB an Archiven heruntergeladen werden.
Nach dieser Operation werden 24,6 kB Plattenplatz zusätzlich benutzt.
Möchten Sie fortfahren? [J/n] J
Holen:1 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 gcc-8-base amd64 8.2.0-1ubuntu2~18.04 [18,3 kB]
Holen:2 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libstdc++6 amd64 8.2.0-1ubuntu2~18.04 [398 kB]
Holen:3 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libquadmath0 amd64 8.2.0-1ubuntu2~18.04 [133 kB]
Holen:4 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libgomp1 amd64 8.2.0-1ubuntu2~18.04 [76,4 kB]
Holen:5 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libcc1-0 amd64 8.2.0-1ubuntu2~18.04 [39,5 kB]
Holen:6 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 lib32stdc++6 amd64 8.2.0-1ubuntu2~18.04 [414 kB]
Holen:7 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 lib32gcc1 amd64 1:8.2.0-1ubuntu2~18.04 [47,9 kB]
Holen:8 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libgcc1 amd64 1:8.2.0-1ubuntu2~18.04 [40,7 kB]
Holen:9 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 ubuntu-release-upgrader-gtk all 1:18.04.26 [9.372 B]
Holen:10 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 ubuntu-release-upgrader-core all 1:18.04.26 [24,3 kB]
Holen:11 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 python3-distupgrade all 1:18.04.26 [105 kB]
Holen:12 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 python3-problem-report all 2.20.9-0ubuntu7.4 [9.776 B]
Holen:13 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 python3-apport all 2.20.9-0ubuntu7.4 [81,6 kB]
Holen:14 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 apport all 2.20.9-0ubuntu7.4 [124 kB]
Holen:15 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 apport-gtk all 2.20.9-0ubuntu7.4 [9.708 B]
Holen:16 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 binutils-x86-64-linux-gnu amd64 2.30-21ubuntu1~18.04 [1.855 kB]
Holen:17 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libbinutils amd64 2.30-21ubuntu1~18.04 [502 kB]
Holen:18 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 binutils amd64 2.30-21ubuntu1~18.04 [3.392 B]
Holen:19 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 binutils-common amd64 2.30-21ubuntu1~18.04 [193 kB]
Holen:20 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libgfortran4 amd64 7.3.0-27ubuntu1~18.04 [492 kB]
Holen:21 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 cpp-7 amd64 7.3.0-27ubuntu1~18.04 [6.738 kB]
Holen:22 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 gcc-7-base amd64 7.3.0-27ubuntu1~18.04 [18,9 kB]
Holen:23 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 cpp amd64 4:7.3.0-3ubuntu2.1 [27,6 kB]
Holen:24 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 gdm3 amd64 3.28.3-0ubuntu18.04.1 [267 kB]
Holen:25 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libgdm1 amd64 3.28.3-0ubuntu18.04.1 [49,8 kB]
Holen:26 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 gir1.2-gdm-1.0 amd64 3.28.3-0ubuntu18.04.1 [9.548 B]
Holen:27 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 nautilus amd64 1:3.26.4-0~ubuntu18.04.1 [808 kB]
Holen:28 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 nautilus-data all 1:3.26.4-0~ubuntu18.04.1 [68,9 kB]
Holen:29 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libnautilus-extension1a amd64 1:3.26.4-0~ubuntu18.04.1 [15,2 kB]
Es wurden 12,6 MB in 20 s geholt (644 kB/s).
Vorkonfiguration der Pakete ...
(Lese Datenbank ... 253104 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von .../gcc-8-base_8.2.0-1ubuntu2~18.04_amd64.deb ...
Entpacken von gcc-8-base:amd64 (8.2.0-1ubuntu2~18.04) über (8-20180414-1ubuntu2) ...
gcc-8-base:amd64 (8.2.0-1ubuntu2~18.04) wird eingerichtet ...
(Lese Datenbank ... 253103 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von .../libstdc++6_8.2.0-1ubuntu2~18.04_amd64.deb ...
Entpacken von libstdc++6:amd64 (8.2.0-1ubuntu2~18.04) über (8-20180414-1ubuntu2) ...
libstdc++6:amd64 (8.2.0-1ubuntu2~18.04) wird eingerichtet ...
(Lese Datenbank ... 253103 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von .../0-libquadmath0_8.2.0-1ubuntu2~18.04_amd64.deb ...
Entpacken von libquadmath0:amd64 (8.2.0-1ubuntu2~18.04) über (8-20180414-1ubuntu2) ...
Vorbereitung zum Entpacken von .../1-libgomp1_8.2.0-1ubuntu2~18.04_amd64.deb ...
Entpacken von libgomp1:amd64 (8.2.0-1ubuntu2~18.04) über (8-20180414-1ubuntu2) ...
Vorbereitung zum Entpacken von .../2-libcc1-0_8.2.0-1ubuntu2~18.04_amd64.deb ...
Entpacken von libcc1-0:amd64 (8.2.0-1ubuntu2~18.04) über (8-20180414-1ubuntu2) ...
Vorbereitung zum Entpacken von .../3-lib32stdc++6_8.2.0-1ubuntu2~18.04_amd64.deb ...
Entpacken von lib32stdc++6 (8.2.0-1ubuntu2~18.04) über (8-20180414-1ubuntu2) ...
Vorbereitung zum Entpacken von .../4-lib32gcc1_1%3a8.2.0-1ubuntu2~18.04_amd64.deb ...
Entpacken von lib32gcc1 (1:8.2.0-1ubuntu2~18.04) über (1:8-20180414-1ubuntu2) ...
Vorbereitung zum Entpacken von .../5-libgcc1_1%3a8.2.0-1ubuntu2~18.04_amd64.deb ...
Entpacken von libgcc1:amd64 (1:8.2.0-1ubuntu2~18.04) über (1:8-20180414-1ubuntu2) ...
libgcc1:amd64 (1:8.2.0-1ubuntu2~18.04) wird eingerichtet ...
(Lese Datenbank ... 253103 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von .../00-ubuntu-release-upgrader-gtk_1%3a18.04.26_all.deb ...
Entpacken von ubuntu-release-upgrader-gtk (1:18.04.26) über (1:18.04.25) ...
Vorbereitung zum Entpacken von .../01-ubuntu-release-upgrader-core_1%3a18.04.26_all.deb ...
Entpacken von ubuntu-release-upgrader-core (1:18.04.26) über (1:18.04.25) ...
Vorbereitung zum Entpacken von .../02-python3-distupgrade_1%3a18.04.26_all.deb ...
Entpacken von python3-distupgrade (1:18.04.26) über (1:18.04.25) ...
Vorbereitung zum Entpacken von .../03-python3-problem-report_2.20.9-0ubuntu7.4_all.deb ...
Entpacken von python3-problem-report (2.20.9-0ubuntu7.4) über (2.20.9-0ubuntu7.2) ...
Vorbereitung zum Entpacken von .../04-python3-apport_2.20.9-0ubuntu7.4_all.deb ...
Entpacken von python3-apport (2.20.9-0ubuntu7.4) über (2.20.9-0ubuntu7.2) ...
Vorbereitung zum Entpacken von .../05-apport_2.20.9-0ubuntu7.4_all.deb ...
Entpacken von apport (2.20.9-0ubuntu7.4) über (2.20.9-0ubuntu7.2) ...
Vorbereitung zum Entpacken von .../06-apport-gtk_2.20.9-0ubuntu7.4_all.deb ...
Entpacken von apport-gtk (2.20.9-0ubuntu7.4) über (2.20.9-0ubuntu7.2) ...
Vorbereitung zum Entpacken von .../07-binutils-x86-64-linux-gnu_2.30-21ubuntu1~18.04_amd64.deb ...
Entpacken von binutils-x86-64-linux-gnu (2.30-21ubuntu1~18.04) über (2.30-20ubuntu2~18.04) ...
Vorbereitung zum Entpacken von .../08-libbinutils_2.30-21ubuntu1~18.04_amd64.deb ...
Entpacken von libbinutils:amd64 (2.30-21ubuntu1~18.04) über (2.30-20ubuntu2~18.04) ...
Vorbereitung zum Entpacken von .../09-binutils_2.30-21ubuntu1~18.04_amd64.deb ...
Entpacken von binutils (2.30-21ubuntu1~18.04) über (2.30-20ubuntu2~18.04) ...
Vorbereitung zum Entpacken von .../10-binutils-common_2.30-21ubuntu1~18.04_amd64.deb ...
Entpacken von binutils-common:amd64 (2.30-21ubuntu1~18.04) über (2.30-20ubuntu2~18.04) ...
Vorbereitung zum Entpacken von .../11-libgfortran4_7.3.0-27ubuntu1~18.04_amd64.deb ...
Entpacken von libgfortran4:amd64 (7.3.0-27ubuntu1~18.04) über (7.3.0-16ubuntu3) ...
Vorbereitung zum Entpacken von .../12-cpp-7_7.3.0-27ubuntu1~18.04_amd64.deb ...
Entpacken von cpp-7 (7.3.0-27ubuntu1~18.04) über (7.3.0-16ubuntu3) ...
Vorbereitung zum Entpacken von .../13-gcc-7-base_7.3.0-27ubuntu1~18.04_amd64.deb ...
Entpacken von gcc-7-base:amd64 (7.3.0-27ubuntu1~18.04) über (7.3.0-16ubuntu3) ...
Vorbereitung zum Entpacken von .../14-cpp_4%3a7.3.0-3ubuntu2.1_amd64.deb ...
Entpacken von cpp (4:7.3.0-3ubuntu2.1) über (4:7.3.0-3ubuntu2) ...
Vorbereitung zum Entpacken von .../15-gdm3_3.28.3-0ubuntu18.04.1_amd64.deb ...
Entpacken von gdm3 (3.28.3-0ubuntu18.04.1) über (3.28.2-0ubuntu1.4) ...
Vorbereitung zum Entpacken von .../16-libgdm1_3.28.3-0ubuntu18.04.1_amd64.deb ...
Entpacken von libgdm1 (3.28.3-0ubuntu18.04.1) über (3.28.2-0ubuntu1.4) ...
Vorbereitung zum Entpacken von .../17-gir1.2-gdm-1.0_3.28.3-0ubuntu18.04.1_amd64.deb ...
Entpacken von gir1.2-gdm-1.0 (3.28.3-0ubuntu18.04.1) über (3.28.2-0ubuntu1.4) ...
Vorbereitung zum Entpacken von .../18-nautilus_1%3a3.26.4-0~ubuntu18.04.1_amd64.deb ...
Entpacken von nautilus (1:3.26.4-0~ubuntu18.04.1) über (1:3.26.3-0ubuntu4) ...
Vorbereitung zum Entpacken von .../19-nautilus-data_1%3a3.26.4-0~ubuntu18.04.1_all.deb ...
Entpacken von nautilus-data (1:3.26.4-0~ubuntu18.04.1) über (1:3.26.3-0ubuntu4) ...
Vorbereitung zum Entpacken von .../20-libnautilus-extension1a_1%3a3.26.4-0~ubuntu18.04.1_amd64.deb ...
Entpacken von libnautilus-extension1a:amd64 (1:3.26.4-0~ubuntu18.04.1) über (1:3.26.3-0ubuntu4) ...
libquadmath0:amd64 (8.2.0-1ubuntu2~18.04) wird eingerichtet ...
libgomp1:amd64 (8.2.0-1ubuntu2~18.04) wird eingerichtet ...
libcc1-0:amd64 (8.2.0-1ubuntu2~18.04) wird eingerichtet ...
nautilus-data (1:3.26.4-0~ubuntu18.04.1) wird eingerichtet ...
Trigger für mime-support (3.60ubuntu1) werden verarbeitet ...
Trigger für ureadahead (0.100.0-20) werden verarbeitet ...
ureadahead will be reprofiled on next reboot
Trigger für desktop-file-utils (0.23-1ubuntu3.18.04.1) werden verarbeitet ...
Trigger für libglib2.0-0:amd64 (2.56.2-0ubuntu0.18.04.2) werden verarbeitet ...
libgdm1 (3.28.3-0ubuntu18.04.1) wird eingerichtet ...
gcc-7-base:amd64 (7.3.0-27ubuntu1~18.04) wird eingerichtet ...
python3-problem-report (2.20.9-0ubuntu7.4) wird eingerichtet ...
binutils-common:amd64 (2.30-21ubuntu1~18.04) wird eingerichtet ...
Trigger für libc-bin (2.27-3ubuntu1) werden verarbeitet ...
libnautilus-extension1a:amd64 (1:3.26.4-0~ubuntu18.04.1) wird eingerichtet ...
Trigger für systemd (237-3ubuntu10.3) werden verarbeitet ...
Trigger für man-db (2.8.3-2) werden verarbeitet ...
Trigger für gnome-menus (3.13.3-11ubuntu1.1) werden verarbeitet ...
Trigger für dbus (1.12.2-1ubuntu1) werden verarbeitet ...
Trigger für hicolor-icon-theme (0.17-2) werden verarbeitet ...
nautilus (1:3.26.4-0~ubuntu18.04.1) wird eingerichtet ...
python3-distupgrade (1:18.04.26) wird eingerichtet ...
lib32gcc1 (1:8.2.0-1ubuntu2~18.04) wird eingerichtet ...
gir1.2-gdm-1.0 (3.28.3-0ubuntu18.04.1) wird eingerichtet ...
libgfortran4:amd64 (7.3.0-27ubuntu1~18.04) wird eingerichtet ...
libbinutils:amd64 (2.30-21ubuntu1~18.04) wird eingerichtet ...
gdm3 (3.28.3-0ubuntu18.04.1) wird eingerichtet ...
ubuntu-release-upgrader-core (1:18.04.26) wird eingerichtet ...
python3-apport (2.20.9-0ubuntu7.4) wird eingerichtet ...
cpp-7 (7.3.0-27ubuntu1~18.04) wird eingerichtet ...
apport (2.20.9-0ubuntu7.4) wird eingerichtet ...
Created symlink /etc/systemd/system/paths.target.wants/apport-autoreport.path → /lib/systemd/system/apport-autoreport.path.
apport-autoreport.service is a disabled or a static unit, not starting it.
lib32stdc++6 (8.2.0-1ubuntu2~18.04) wird eingerichtet ...
binutils-x86-64-linux-gnu (2.30-21ubuntu1~18.04) wird eingerichtet ...
cpp (4:7.3.0-3ubuntu2.1) wird eingerichtet ...
ubuntu-release-upgrader-gtk (1:18.04.26) wird eingerichtet ...
apport-gtk (2.20.9-0ubuntu7.4) wird eingerichtet ...
binutils (2.30-21ubuntu1~18.04) wird eingerichtet ...
Trigger für libc-bin (2.27-3ubuntu1) werden verarbeitet ...
wolfgang@wolfgang-MS-7800:~/Brother-DCP-J562DW$
|