Ich versuche gerade bekannten Ubuntu schmackhaft zu machen, aber das HP Notebook macht es mir relativ schwer. Vorweg: Lösungen die nach jedem Kernelupdate manuell neu kompiliert werden müssen helfen in diesem Fall leider nicht
lscpi
1 2 3 | 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller (rev 07) 04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01) |
syslog
1 2 3 4 5 6 7 8 9 10 11 | Oct 28 20:45:49 wagtop kernel: [ 26.643067] rtl8723be 0000:02:00.0: enabling device (0000 -> 0003) Oct 28 20:45:49 wagtop kernel: [ 26.673816] rtl8723be: Using firmware rtlwifi/rtl8723befw_36.bin Oct 28 20:45:49 wagtop kernel: [ 26.756464] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' Oct 28 20:45:49 wagtop kernel: [ 26.756896] rtlwifi: rtlwifi: wireless switch is on Oct 28 20:45:49 wagtop kernel: [ 26.978405] rtl8723be 0000:02:00.0 wlo1: renamed from wlan0 Oct 28 20:45:49 wagtop kernel: [ 27.821447] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 Oct 28 20:45:49 wagtop kernel: [ 27.821455] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_config.bin Oct 28 20:45:49 wagtop kernel: [ 27.871693] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 Oct 28 20:45:49 wagtop kernel: [ 27.871701] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin Oct 28 20:45:51 wagtop NetworkManager[936]: <info> [1540755951.9136] rfkill0: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:03.1/0000:02:00.0/ieee80211/phy0/rfkill0) (driver rtl8723be) Oct 28 20:51:40 wagtop dbus-daemon[2924]: [session uid=0 pid=2922] Activating service name='ca.desrt.dconf' requested by ':1.0' (uid=0 pid=2917 comm="pluma /etc/modprobe.d/rtl8723be_options.conf " label="unconfined") |
/etc/modprobe.d/rtl8723be_options.conf
1 | options rtl8723be swenc=1 fwlps=0 ips=0 ant_sel=2 |
Ja auch ant_sel=1 probiert.
Habe mich an diese Anleitung gehalten: https://forum.ubuntuusers.de/topic/problem-mit-dem-funknetzwerk/#post-7810763
Aber weiterhin ist auch das 1 Wand und 5m entfernte Wlan nicht in Reichweite...