pepe123
Anmeldungsdatum: 20. Juni 2019
Beiträge: Zähle...
|
hallo habe heute ubuntu installiert, kenne mich also nicht aus und habe das Problem in den letzten Stunden nicht lösen können. Im terminal wird zwar die Soundkarte erkannt aber kein Audio signal.
bei Eingabe von aplay /usr/share/sounds/alsa/Front_Center.wav
Wiedergabe: WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate: 48000 Hz, mono
Unterlauf!!! (mindestens 0,927 ms)
Unterlauf!!! (mindestens 0,026 ms)
Bearbeitet von pepre: Titel konkretisiert, Codeblock gesetzt.
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Willkommen im Forum ☺ Arbeite dich mal hier durch https://wiki.ubuntuusers.de/Sound_Problembehebung/Audio-Fehler-Beschreibung/ Zeige dann,falls nötig die Terminal Ausgaben hier im codeblock
|
pepe123
(Themenstarter)
Anmeldungsdatum: 20. Juni 2019
Beiträge: 6
|
ok, danke für die schnelle Antwort To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.
pepe@pepe-E2221T-MD60796:~$ lsb_release -d
Description: Ubuntu 16.04.5 LTS
pepe@pepe-E2221T-MD60796:~$ uname -r
4.15.0-29-lowlatency
pepe@pepe-E2221T-MD60796:~$ cat /proc/asound/cards
0 [Audio ]: HdmiLpeAudio - Intel HDMI/DP LPE Audio
Intel HDMI/DP LPE Audio
pepe@pepe-E2221T-MD60796:~$ aplay -l
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 0: Audio [Intel HDMI/DP LPE Audio], Gerät 0: HdmiLpeAudio [Intel HDMI/DP LPE Audio]
Sub-Geräte: 0/1
Sub-Gerät #0: subdevice #0
Karte 0: Audio [Intel HDMI/DP LPE Audio], Gerät 1: HdmiLpeAudio [Intel HDMI/DP LPE Audio]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 0: Audio [Intel HDMI/DP LPE Audio], Gerät 2: HdmiLpeAudio [Intel HDMI/DP LPE Audio]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
pepe@pepe-E2221T-MD60796:~$ aplay /usr/share/sounds/alsa/Noise.wav
Wiedergabe: WAVE '/usr/share/sounds/alsa/Noise.wav' : Signed 16 bit Little Endian, Rate: 48000 Hz, mono
Unterlauf!!! (mindestens 0,097 ms)
Unterlauf!!! (mindestens 0,050 ms)
pepe@pepe-E2221T-MD60796:~$ lspci -nnk I grep -iA2 audio
Usage: lspci [<switches>]
Basic display modes:
-mm Produce machine-readable output (single -m for an obsolete format)
-t Show bus tree
Display options:
-v Be verbose (-vv for very verbose)
-k Show kernel drivers handling each device
-x Show hex-dump of the standard part of the config space
-xxx Show hex-dump of the whole config space (dangerous; root only)
-xxxx Show hex-dump of the 4096-byte extended config space (root only)
-b Bus-centric view (addresses and IRQ's as seen by the bus)
-D Always show domain numbers
Resolving of device ID's to names:
-n Show numeric ID's
-nn Show both textual and numeric ID's (names & numbers)
-q Query the PCI ID database for unknown ID's via DNS
-qq As above, but re-query locally cached entries
-Q Query the PCI ID database for all ID's via DNS
Selection of devices:
-s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]] Show only devices in selected slots
-d [<vendor>]:[<device>][:<class>] Show only devices with specified ID's
Other options:
-i <file> Use specified ID database instead of A2
-p <file> Look up kernel modules in a given file instead of default modules.pcimap
-M Enable `bus mapping' mode (dangerous; root only)
PCI access options:
-A <method> Use the specified PCI access method (see `-A help' for a list)
-O <par>=<val> Set PCI access parameter (see `-O help' for a list)
-G Enable PCI access debugging
-H <mode> Use direct hardware access (<mode> = 1 or 2)
-F <file> Read PCI configuration dump from a given file
pepe@pepe-E2221T-MD60796:~$ ps -C esd
PID TTY TIME CMD
pepe@pepe-E2221T-MD60796:~$ ps -C arts
PID TTY TIME CMD
pepe@pepe-E2221T-MD60796:~$ ps -C pulseaudio
PID TTY TIME CMD
pepe@pepe-E2221T-MD60796:~$ DPKG -L i TR -S " " I grep " alsa-"
DPKG: Befehl nicht gefunden.
pepe@pepe-E2221T-MD60796:~$ dpkg -l I tr -s " " I grep " alsa-"
Gewünscht=Unbekannt/Installieren/R=Entfernen/P=Vollständig Löschen/Halten
| Status=Nicht/Installiert/Config/U=Entpackt/halb konFiguriert/
Halb installiert/Trigger erWartet/Trigger anhängig
|/ Fehler?=(kein)/R=Neuinstallation notwendig (Status, Fehler: GROSS=schlecht)
||/ Name Version Architektur Beschreibung
+++-==============-============-============-=================================
ii grep 2.25-1~16.04 amd64 GNU grep, egrep and fgrep
dpkg-query: Kein Paket gefunden, das auf I passt
dpkg-query: Kein Paket gefunden, das auf tr passt
dpkg-query: Kein Paket gefunden, das auf -s passt
dpkg-query: Kein Paket gefunden, das auf passt
dpkg-query: Kein Paket gefunden, das auf I passt
dpkg-query: Kein Paket gefunden, das auf alsa- passt
pepe@pepe-E2221T-MD60796:~$ lsmod I grep "snd"
Usage: lsmod
pepe@pepe-E2221T-MD60796:~$ head -n 3 /proc/asound/card0/codec#0
head: '/proc/asound/card0/codec#0' kann nicht zum Lesen geöffnet werden: Datei oder Verzeichnis nicht gefunden
pepe@pepe-E2221T-MD60796:~$ head -n 3 /proc/asound/card0/codec97#0/ac97#0-0
head: '/proc/asound/card0/codec97#0/ac97#0-0' kann nicht zum Lesen geöffnet werden: Datei oder Verzeichnis nicht gefunden
pepe@pepe-E2221T-MD60796:~$ head n 3 /proc/asound/card0/codec97#0/ac97#0-0+regs
head: 'n' kann nicht zum Lesen geöffnet werden: Datei oder Verzeichnis nicht gefunden
head: '3' kann nicht zum Lesen geöffnet werden: Datei oder Verzeichnis nicht gefunden
head: '/proc/asound/card0/codec97#0/ac97#0-0+regs' kann nicht zum Lesen geöffnet werden: Datei oder Verzeichnis nicht gefunden
pepe@pepe-E2221T-MD60796:~$ cat ~/ .asoundrc
cat: /home/pepe/: Ist ein Verzeichnis
cat: .asoundrc: Datei oder Verzeichnis nicht gefunden
pepe@pepe-E2221T-MD60796:~$ cat ~/ .asoundrc.asoundconf
cat: /home/pepe/: Ist ein Verzeichnis
cat: .asoundrc.asoundconf: Datei oder Verzeichnis nicht gefunden
pepe@pepe-E2221T-MD60796:~$ cat /etc/asound.conf
cat: /etc/asound.conf: Datei oder Verzeichnis nicht gefunden
pepe@pepe-E2221T-MD60796:~$
|
hakel
Anmeldungsdatum: 13. August 2009
Beiträge: 23336
|
habe heute ubuntu installiert
Wieso installierst du 16.04? Wir haben das Jahr 2019. Verrate auch mal deine Hardware. Ich sehe da übrigens nur HDMI, ist das so gewollt?
|
pepe123
(Themenstarter)
Anmeldungsdatum: 20. Juni 2019
Beiträge: 6
|
Ein Freund hat mir einen usb-stick mit der version gegeben, bin davon ausgegangen dass es die aktuelle ist;-) Kann es einfach daran liegen dass der sound nicht geht? hardware-infos: pepe@pepe-E2221T-MD60796:~$ sudo lshw
[sudo] Passwort für pepe:
pepe-e2221t-md60796
Beschreibung: Computer
Produkt: E2221T MD60796 (ML-241005 30023309)
Hersteller: MEDION
Version: AMIC
Seriennummer: 30023309050527500986
Breite: 64 bits
Fähigkeiten: smbios-3.0 dmi-3.0 vsyscall32
Konfiguration: boot=normal family=Mobile sku=ML-241005 30023309 uuid=DCD33142-DECE-E611-9C1B-3E66185BBF16
*-core
Beschreibung: Hauptplatine
Produkt: NT16H
Hersteller: MEDION
Physische ID: 0
Version: 1.0
Seriennummer: EMNT16H0264F75190985
Steckplatz: Default string
*-firmware
Beschreibung: BIOS
Hersteller: American Megatrends Inc.
Physische ID: 0
Version: 5.11
date: 02/27/2017
Größe: 64KiB
Kapazität: 4160KiB
Fähigkeiten: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int14serial int17printer acpi usb biosbootspecification uefi
*-memory
Beschreibung: Systemspeicher
Physische ID: 28
Steckplatz: Systemplatine oder Hauptplatine
Größe: 2GiB
*-bank:0
Beschreibung: DIMM DDR3 1066 MHz (0,9 ns)
Produkt: 00000000
Hersteller: Hynix Semiconductor
Physische ID: 0
Seriennummer: 00000000
Steckplatz: A1_DIMM0
Größe: 2GiB
Breite: 8 bits
Takt: 1066MHz (0.9ns)
*-bank:1
Beschreibung: DIMMProject-Id-Version: lshwReport-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>POT-Creation-Date: 2009-10-08 14:02+0200PO-Revision-Date: 2012-05-30 08:16+0000Last-Translator: Hendrik Knackstedt <Unknown>Language-Team: German <de@li.org>MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2016-06-27 17:08+0000X-Generator: Launchpad (build 18115) [leer]
Produkt: 00000000
Hersteller: Hynix Semiconductor
Physische ID: 1
Seriennummer: 00000000
Steckplatz: A1_DIMM1
*-cache:0
Beschreibung: L1 Cache
Physische ID: 32
Steckplatz: CPU Internal L1
Größe: 224KiB
Kapazität: 224KiB
Fähigkeiten: internal write-back
Konfiguration: level=1
*-cache:1
Beschreibung: L2 Cache
Physische ID: 33
Steckplatz: CPU Internal L2
Größe: 2MiB
Kapazität: 2MiB
Fähigkeiten: internal write-back unified
Konfiguration: level=2
*-cpu
Beschreibung: CPU
Produkt: Intel(R) Atom(TM) x5-Z8350 CPU @ 1.44GHz
Hersteller: Intel Corp.
Physische ID: 34
Bus-Informationen: cpu@0
Version: Intel(R) Atom(TM) x5-Z8350 CPU @ 1.44GHz
Steckplatz: SOCKET 0
Größe: 1509MHz
Kapazität: 2400MHz
Breite: 64 bits
Takt: 80MHz
Fähigkeiten: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology tsc_reliable nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch epb pti tpr_shadow vnmi flexpriority ept vpid tsc_adjust smep erms dtherm ida arat cpufreq
Konfiguration: cores=4 enabledcores=4 threads=4
*-pci
Beschreibung: Host bridge
Produkt: Intel Corporation
Hersteller: Intel Corporation
Physische ID: 100
Bus-Informationen: pci@0000:00:00.0
Version: 36
Breite: 32 bits
Takt: 33MHz
Konfiguration: driver=iosf_mbi_pci
Ressourcen: irq:0
*-display
Beschreibung: VGA compatible controller
Produkt: Intel Corporation
Hersteller: Intel Corporation
Physische ID: 2
Bus-Informationen: pci@0000:00:02.0
Version: 36
Breite: 64 bits
Takt: 33MHz
Fähigkeiten: pm msi vga_controller bus_master cap_list rom
Konfiguration: driver=i915 latency=0
Ressourcen: irq:120 memory:90000000-90ffffff memory:80000000-8fffffff ioport:f000(Größe=64) memory:c0000-dffff
*-multimedia UNGEFORDERT
Beschreibung: Multimedia controller
Produkt: Intel Corporation
Hersteller: Intel Corporation
Physische ID: 3
Bus-Informationen: pci@0000:00:03.0
Version: 36
Breite: 32 bits
Takt: 33MHz
Fähigkeiten: pm msi cap_list
Konfiguration: latency=0
Ressourcen: memory:91000000-913fffff
*-generic:0
Beschreibung: Signal processing controller
Produkt: Intel Corporation
Hersteller: Intel Corporation
Physische ID: b
Bus-Informationen: pci@0000:00:0b.0
Version: 36
Breite: 64 bits
Takt: 33MHz
Fähigkeiten: msi pm cap_list
Konfiguration: driver=proc_thermal latency=0
Ressourcen: irq:165 memory:9193b000-9193bfff
*-usb
Beschreibung: USB controller
Produkt: Intel Corporation
Hersteller: Intel Corporation
Physische ID: 14
Bus-Informationen: pci@0000:00:14.0
Version: 36
Breite: 64 bits
Takt: 33MHz
Fähigkeiten: pm msi xhci bus_master cap_list
Konfiguration: driver=xhci_hcd latency=0
Ressourcen: irq:117 memory:91900000-9190ffff
*-usbhost:0
Produkt: xHCI Host Controller
Hersteller: Linux 4.15.0-29-lowlatency xhci-hcd
Physische ID: 0
Bus-Informationen: usb@1
Logischer Name: usb1
Version: 4.15
Fähigkeiten: usb-2.00
Konfiguration: driver=hub slots=7 speed=480Mbit/s
*-usb:0
Beschreibung: Maus
Produkt: USB Laser Mouse
Hersteller: Logitech
Physische ID: 1
Bus-Informationen: usb@1:1
Version: 31.00
Fähigkeiten: usb-2.00
Konfiguration: driver=usbhid maxpower=98mA speed=1Mbit/s
*-usb:1
Beschreibung: USB-Hub
Produkt: USB2.0 Hub
Hersteller: Genesys Logic, Inc.
Physische ID: 2
Bus-Informationen: usb@1:2
Version: 32.98
Fähigkeiten: usb-2.00
Konfiguration: driver=hub maxpower=100mA slots=4 speed=480Mbit/s
*-usb:0
Beschreibung: Bluetooth-Schnittstelle
Hersteller: Intel Corp.
Physische ID: 1
Bus-Informationen: usb@1:2.1
Version: 0.01
Fähigkeiten: bluetooth usb-2.00
Konfiguration: driver=btusb maxpower=100mA speed=12Mbit/s
*-usb:1
Beschreibung: Allgemeines USB-Gerät
Produkt: USB2.0-CRW
Hersteller: Generic
Physische ID: 2
Bus-Informationen: usb@1:2.2
Version: 39.60
Seriennummer: 20100201396000000
Fähigkeiten: usb-2.00
Konfiguration: driver=rtsx_usb maxpower=500mA speed=480Mbit/s
*-usb:2
Beschreibung: Tastatur
Produkt: USB Keyboard
Hersteller: Hantick
Physische ID: 4
Bus-Informationen: usb@1:2.4
Version: 50.01
Seriennummer: NT16H-MEDION-US-20170601-VER:3.0
Fähigkeiten: usb-1.10
Konfiguration: driver=usbhid maxpower=100mA speed=1Mbit/s
*-usb:2
Beschreibung: Video
Produkt: USB 2.0 PC Cam
Hersteller: Image Processor
Physische ID: 4
Bus-Informationen: usb@1:4
Version: 0.05
Fähigkeiten: usb-2.00
Konfiguration: driver=uvcvideo maxpower=500mA speed=480Mbit/s
*-usbhost:1
Produkt: xHCI Host Controller
Hersteller: Linux 4.15.0-29-lowlatency xhci-hcd
Physische ID: 1
Bus-Informationen: usb@2
Logischer Name: usb2
Version: 4.15
Fähigkeiten: usb-3.00
Konfiguration: driver=hub slots=6 speed=5000Mbit/s
*-generic:1
Beschreibung: Encryption controller
Produkt: Intel Corporation
Hersteller: Intel Corporation
Physische ID: 1a
Bus-Informationen: pci@0000:00:1a.0
Version: 36
Breite: 32 bits
Takt: 33MHz
Fähigkeiten: pm msi bus_master cap_list
Konfiguration: driver=mei_txe latency=0
Ressourcen: irq:166 memory:91700000-917fffff memory:91600000-916fffff
*-pci
Beschreibung: PCI bridge
Produkt: Intel Corporation
Hersteller: Intel Corporation
Physische ID: 1c
Bus-Informationen: pci@0000:00:1c.0
Version: 36
Breite: 32 bits
Takt: 33MHz
Fähigkeiten: pci pciexpress msi pm normal_decode bus_master cap_list
Konfiguration: driver=pcieport
Ressourcen: irq:116 memory:91800000-918fffff
*-network
Beschreibung: Kabellose Verbindung
Produkt: Wireless 3165
Hersteller: Intel Corporation
Physische ID: 0
Bus-Informationen: pci@0000:01:00.0
Logischer Name: wlp1s0
Version: 91
Seriennummer: a0:af:bd:31:46:9c
Breite: 64 bits
Takt: 33MHz
Fähigkeiten: pm msi pciexpress bus_master cap_list ethernet physical wireless
Konfiguration: broadcast=yes driver=iwlwifi driverversion=4.15.0-29-lowlatency firmware=29.1044073957.0 ip=192.168.1.19 latency=0 link=yes multicast=yes wireless=IEEE 802.11
Ressourcen: irq:168 memory:91800000-91801fff
*-isa
Beschreibung: ISA bridge
Produkt: Intel Corporation
Hersteller: Intel Corporation
Physische ID: 1f
Bus-Informationen: pci@0000:00:1f.0
Version: 36
Breite: 32 bits
Takt: 33MHz
Fähigkeiten: isa bus_master cap_list
Konfiguration: driver=lpc_ich latency=0
Ressourcen: irq:0
|
tomtomtom
Supporter
Anmeldungsdatum: 22. August 2008
Beiträge: 53601
Wohnort: Berlin
|
pepe123 schrieb: pepe@pepe-E2221T-MD60796:~$ lspci -nnk I grep -iA2 audio
Bitte solche Befehle mit Copy&Paste übertragen statt falsch abzutippen. Da gehört kein großes I hin, das ist eine Pipe, also | (Drittbelegung der <-Taste auf QWERTZ-Standardtastaturen.) pepe@pepe-E2221T-MD60796:~$ dpkg -l I tr -s " " I grep " alsa-"
Gewünscht=Unbekannt/Installieren/R=Entfernen/P=Vollständig Löschen/Halten
| Status=Nicht/Installiert/Config/U=Entpackt/halb konFiguriert/
Halb installiert/Trigger erWartet/Trigger anhängig
|/ Fehler?=(kein)/R=Neuinstallation notwendig (Status, Fehler: GROSS=schlecht)
||/ Name Version Architektur Beschreibung
+++-==============-============-============-=================================
ii grep 2.25-1~16.04 amd64 GNU grep, egrep and fgrep
dpkg-query: Kein Paket gefunden, das auf I passt
dpkg-query: Kein Paket gefunden, das auf tr passt
dpkg-query: Kein Paket gefunden, das auf -s passt
dpkg-query: Kein Paket gefunden, das auf passt
dpkg-query: Kein Paket gefunden, das auf I passt
dpkg-query: Kein Paket gefunden, das auf alsa- passt
Siehe oben. Bitte kopieren und einfügen, nicht falsch abtippen... Mal zur Erläuterung an dem Befehl hier: Falsch: dpkg -l I tr -s " " I grep " alsa-" dpkg zeigt die installierten Pakete an, die "I", "tr" "-s" "I" "grep" und " alsa-" heißen. Korrekt: dpkg -l | tr -s " " | grep " alsa-" dpkg zeigt alle installierten Pakete an, grep filtert alle heraus, die " alsa-" im Namen haben, tr macht aus mehreren Leerzeichen eines (keine Ahnung, wofür man das hier brauchen sollte). Unterschied: Machst du das korrekt kann man sehen, ob alle benötigten ALSA-Tools installiert sind. Machst du das falsch kann niemand irgendetwas auswerten, weil du keine Daten lieferst. pepe@pepe-E2221T-MD60796:~$ lsmod I grep "snd"
Siehe oben: Bitte Kopieren und Einfügen statt falsch abzutippen.
uname -r
4.15.0-29-lowlatency
Das ist kein Standard. Selbst installiert oder die falsche Version angegeben? Standard wäre der in Ubuntu Studio 16.04, nicht in Ubuntu 16.04. Aber dann wäre das auch ein nicht aktualisiertes System, denn aktuell wäre Version 4.15.0.52 .
Kann es einfach daran liegen dass der sound nicht geht?
Durchaus kann das an der verwendeten Version liegen. Aber es gibt ja Livesysteme, um so etwas ohne Installation ausprobieren zu können.
|
hakel
Anmeldungsdatum: 13. August 2009
Beiträge: 23336
|
x5-Z8350
Das ist ein "Cherry Trail", damit machst du Kellerkind sicher eine große Freude.
|
pepe123
(Themenstarter)
Anmeldungsdatum: 20. Juni 2019
Beiträge: 6
|
gut, hier nochmal die Befehle, die eine "pipe" enthalten pepe@pepe-E2221T-MD60796:~$ dpkg -l | tr -s " " | grep " alsa-"
ii alsa-base 1.0.25+dfsg-0ubuntu5 all ALSA driver configuration files
ii alsa-tools 1.1.0-0ubuntu1 amd64 Console based ALSA utilities for specific hardware
ii alsa-tools-gui 1.1.0-0ubuntu1 amd64 GUI based ALSA utilities for specific hardware
ii alsa-utils 1.1.0-0ubuntu5 amd64 Utilities for configuring and using ALSA
pepe@pepe-E2221T-MD60796:~$ lspci -nnk | grep -iA2 audio
pepe@pepe-E2221T-MD60796:~$ grep "^audio" /etc/group | grep "$USER" | wc -l
1
pepe@pepe-E2221T-MD60796:~$ lsmod | grep "snd"
snd_intel_sst_acpi 16384 0
snd_intel_sst_core 53248 1 snd_intel_sst_acpi
snd_soc_sst_atom_hifi2_platform 102400 1 snd_intel_sst_core
snd_soc_nau8824 57344 0
snd_soc_acpi 16384 1 snd_intel_sst_acpi
snd_soc_acpi_intel_match 20480 1 snd_intel_sst_acpi
snd_soc_core 241664 2 snd_soc_nau8824,snd_soc_sst_atom_hifi2_platform
snd_compress 20480 1 snd_soc_core
ac97_bus 16384 1 snd_soc_core
snd_pcm_dmaengine 16384 1 snd_soc_core
snd_hdmi_lpe_audio 24576 0
snd_pcm 98304 5 snd_hdmi_lpe_audio,snd_pcm_dmaengine,snd_soc_nau8824,snd_soc_sst_atom_hifi2_platform,snd_soc_core
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
snd_rawmidi 32768 1 snd_seq_midi
snd_seq 65536 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 32768 2 snd_seq,snd_pcm
snd 81920 9 snd_compress,snd_seq,snd_hdmi_lpe_audio,snd_timer,snd_soc_sst_atom_hifi2_platform,snd_rawmidi,snd_seq_device,snd_soc_core,snd_pcm
soundcore 16384 1 snd
pepe@pepe-E2221T-MD60796:~$
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
hakel schrieb: x5-Z8350
Das ist ein "Cherry Trail", damit machst du Kellerkind sicher eine große Freude.
Ganz Sicher 😈 Pulse scheint nicht zu laufen.Diese Ausgaben nochmal zeigen head -n 1 /proc/asound/card*/codec#* dmesg | egrep -i "alsa|snd|hdmi" pactl info
|
hakel
Anmeldungsdatum: 13. August 2009
Beiträge: 23336
|
Ich würde erstmal Xubuntu 19.04 64Bit drauf kloppen. Es gab mal Gerüchte, daß es damit funktionieren soll. Unity, Atom (Cherry Trail, kein Soundtreiber) ...
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
hakel schrieb: Ich würde erstmal Xubuntu 19.04 64Bit drauf kloppen. Es gab mal Gerüchte, daß es damit funktionieren soll. Unity, Atom (Cherry Trail, kein Soundtreiber) ...
Da stimme ich dir zu 100% zu 😀
|
pepe123
(Themenstarter)
Anmeldungsdatum: 20. Juni 2019
Beiträge: 6
|
Vielen Dank euch, kam erst heute dazu die neue Ubuntu version zu installieren. Jetzt läuft es!
|
Berlin_1946
Supporter, Wikiteam
Anmeldungsdatum: 18. September 2009
Beiträge: 8693
|
pepe123 schrieb: Vielen Dank euch, kam erst heute dazu die neue Ubuntu version zu installieren. Jetzt läuft es!
Sry pepe123, welche hast du jetzt installiert. Du kommst von Ubuntu 16.04 (Xenial Xerus) also eine LTS Version.
Bis du jetzt bei 18.04 (auch LTS) oder bei 19.04? hakel hat dir Xubuntu 19.04 64Bit empfohlen, hast du das realisiert?
|
pepe123
(Themenstarter)
Anmeldungsdatum: 20. Juni 2019
Beiträge: 6
|
genau, wie von hakel empfohlen habe ich die 19.04 mit 64 bit geladen.
|
Berlin_1946
Supporter, Wikiteam
Anmeldungsdatum: 18. September 2009
Beiträge: 8693
|
pepe123 schrieb: genau, wie von hakel empfohlen habe ich die 19.04 mit 64 bit geladen.
Hallo pepe123, danke für die Info. Bitte beachte das Verhalten-im-Forum Aus dem verlinkten Wiki: Beenden einer Diskussion (Thread):
Bitte stelle auf gelöst. Danke und bis zum nächsten mal 😇
|