jochenv
Anmeldungsdatum: 23. April 2016
Beiträge: 634
Wohnort: Kurhessen
|
Hallo zusammen. Ich habe mir einen neuen Drucker geleistet HP M477fdw. Zusammen im Netzwerk stecken jetzt als Drucker/Multifunktionsgerät : HP M477fdw HP 4050tn Brother MFC5895cw
für den neuen Drucker soll ich hplip-3.19.6.run laden und starten. Hierbei ist folgende Meldung aufgetreten:
jochen@LT-SAM02:~/Downloads/hp$ ./hplip-3.19.6.run
Creating directory hplip-3.19.6
Verifying archive integrity... All good.
Uncompressing HPLIP 3.19.6 Self Extracting Archive...........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
HP Linux Imaging and Printing System (ver. 3.19.6)
HPLIP Installer ver. 5.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Installer log saved in: hplip-install_Sun-04-Aug-2019_15:11:11.log
\
note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.
INSTALLATION MODE
-----------------
Automatic mode will install the full HPLIP solution with the most common options.
Custom mode allows you to choose installation options to fit specific requirements.
Please choose the installation mode (a=automatic*, c=custom, q=quit) :
INTRODUCTION
------------
This installer will install HPLIP version 3.19.6 on your computer.
Please close any running package management systems now (YaST, Adept, Synaptic, Up2date, etc).
DISTRO/OS CONFIRMATION
----------------------
Distro appears to be Ubuntu 18.04.
Is "Ubuntu 18.04" your correct distro/OS and version (y=yes*, n=no, q=quit) ?
Initializing. Please wait...
ENTER USER PASSWORD
-------------------
Please enter the sudoer (jochen)'s password:
INSTALLATION NOTES
------------------
Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information. Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.
Please read the installation notes. Press <enter> to continue or 'q' to quit:
SECURITY PACKAGES
-----------------
AppArmor is installed.
AppArmor protects the application from external intrusion attempts making the application secure
Would you like to have this installer install the hplip specific policy/profile (y=yes*, n=no, q=quit) ?
RUNNING PRE-INSTALL COMMANDS
----------------------------
OK
MISSING DEPENDENCIES
--------------------
Following dependencies are not installed. HPLIP will not work if all REQUIRED dependencies are not installed and some of the HPLIP features will not work if OPTIONAL dependencies are not installed.
Package-Name Component Required/Optional
sane-devel scan REQUIRED
Do you want to install these missing dependencies (y=yes*, n=no, q=quit) ?
INSTALL MISSING REQUIRED DEPENDENCIES
-------------------------------------
note: Installation of dependencies requires an active internet connection.
warning: Missing REQUIRED dependency: sane-devel (SANE - Scanning library development files)
CHECKING FOR NETWORK CONNECTION
-------------------------------
Network connection present.
RUNNING PRE-PACKAGE COMMANDS
----------------------------
sudo dpkg --configure -a (Pre-depend step 1)
sudo apt-get install --yes --force-yes -f (Pre-depend step 2)
sudo apt-get update (Pre-depend step 3)
OK
DEPENDENCY AND CONFLICT RESOLUTION
----------------------------------
Running 'sudo apt-get install --assume-yes libsane-dev'
Please wait, this may take several minutes...
error: Command failed. Re-try #1...
Running 'sudo apt-get install --assume-yes libsane-dev'
Please wait, this may take several minutes...
error: Command failed. Re-try #2...
Running 'sudo apt-get install --assume-yes libsane-dev'
Please wait, this may take several minutes...
error: Command failed. Re-try #3...
Running 'sudo apt-get install --assume-yes libsane-dev'
Please wait, this may take several minutes...
error: Package install command failed with error code 100
Would you like to retry installing the missing package(s) (y=yes*, n=no, q=quit) ?
Running 'sudo apt-get install --assume-yes libsane-dev'
Please wait, this may take several minutes...
error: Package install command failed with error code 100
Would you like to retry installing the missing package(s) (y=yes*, n=no, q=quit) ? n
warning: Some HPLIP functionality might not function due to missing package(s).
error: A required dependency 'sane-devel (SANE - Scanning library development files)' is still missing.
RUNNING POST-PACKAGE COMMANDS
-----------------------------
OK
RE-CHECKING DEPENDENCIES
------------------------
error: A required dependency 'sane-devel (SANE - Scanning library development files)' is still missing.
error: Installation cannot continue without this dependency.
error: Please manually install this dependency and re-run this installer.
jochen@LT-SAM02:~/Downloads/hp$ Nun habe ich versucht das Paket libsane-dev einzeln zu laden und habe folgende Meldung bekommen:
jochen@LT-SAM02:~/Downloads/hp$ sudo apt-get install --assume-yes libsane-dev
[sudo] Passwort für jochen:
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Einige Pakete konnten nicht installiert werden. Das kann bedeuten, dass
Sie eine unmögliche Situation angefordert haben oder, wenn Sie die
Unstable-Distribution verwenden, dass einige erforderliche Pakete noch
nicht erstellt wurden oder Incoming noch nicht verlassen haben.
Die folgenden Informationen helfen Ihnen vielleicht, die Situation zu lösen:
Die folgenden Pakete haben unerfüllte Abhängigkeiten:
libsane-dev : Hängt ab von: libsane1 (= 1.0.27-1~experimental3ubuntu2.1) aber 1.0.27+git20180630-artful0 soll installiert werden
E: Probleme können nicht korrigiert werden, Sie haben zurückgehaltene defekte Pakete.
jochen@LT-SAM02:~/Downloads/hp$sudo apt-get install libsane1
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
libsane1 ist schon die neueste Version (1.0.27+git20180630-artful0).
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 1 nicht aktualisiert.
jochen@LT-SAM02:~/Downloads/hp$ Soweit zum Thema Treiber ... kann da jemand helfen ??? hier noch eine paar Infos
dpkg -l hplip hplip-data libhpmud0 libsane-hpaio printer-driver-hpcups hplip-gui
hp-info -i
hp-check -r das ergebnis jochen@LT-SAM02:~$ dpkg -l hplip hplip-data libhpmud0 libsane-hpaio printer-driver-hpcups hplip-gui
Gewünscht=Unbekannt/Installieren/R=Entfernen/P=Vollständig Löschen/Halten
| Status=Nicht/Installiert/Config/U=Entpackt/halb konFiguriert/
Halb installiert/Trigger erWartet/Trigger anhängig
|/ Fehler?=(kein)/R=Neuinstallation notwendig (Status, Fehler: GROSS=schlecht)
||/ Name Version Architektur Beschreibung
+++-===============================-====================-====================-====================================================================
ii hplip 3.17.10+repack0-5 amd64 HP Linux Printing and Imaging System (HPLIP)
ii hplip-data 3.17.10+repack0-5 all HP Linux Printing and Imaging - data files
ii hplip-gui 3.17.10+repack0-5 all HP Linux Printing and Imaging - GUI utilities (Qt-based)
ii libhpmud0:amd64 3.17.10+repack0-5 amd64 HP Multi-Point Transport Driver (hpmud) run-time libraries
ii libsane-hpaio:amd64 3.17.10+repack0-5 amd64 HP SANE backend for multi-function peripherals
ii printer-driver-hpcups 3.17.10+repack0-5 amd64 HP Linux Printing and Imaging - CUPS Raster driver (hpcups)
jochen@LT-SAM02:~$
jochen@LT-SAM02:~$ hp-info -i
HP Linux Imaging and Printing System (ver. 3.17.10)
Device Information Utility ver. 5.2
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
hp:/net/HP_LaserJet_4050_Series?ip=192.168.1.200
Device Parameters (dynamic data):
Parameter Value(s)
---------------------------- ----------------------------------------------------------
agent1-ack False
agent1-desc Black toner cartridge
agent1-dvc 0
agent1-health 0
agent1-health-desc Good/OK
agent1-hp-ink False
agent1-id 0
agent1-kind 4
agent1-known False
agent1-level 0
agent1-level-trigger 0
agent1-sku C4127A/C4127X
agent1-type 1
agent1-virgin False
back-end hp
cups-printers ['HP_LaserJet_4050', 'HP_LaserJet_4050_2']
cups-uri hp:/net/HP_LaserJet_4050_Series?ip=192.168.1.200
dev-file
device-state 1
device-uri hp:/net/HP_LaserJet_4050_Series?ip=192.168.1.200
deviceid MANUFACTURER:Hewlett-Packard;COMMAND
SET:PJL,MLC,PCL,PCLXL,POSTSCRIPT;MODEL:HP LaserJet 4050
Series ;CLASS:PRINTER;DESCRIPTION:Hewlett-Packard LaserJet
4050 Series
duplexer 1
error-state 104
host 192.168.1.200
in-tray1 1
in-tray2 1
is-hp True
media-path 1
panel 0
panel-line1
panel-line2
photo-tray 0
port 1
r 0
revision 254
rg 000
rr 000000
rs 000000000
serial NL7Y093811
status-code 1801
status-desc Low paper
supply-door 1
top-door 4
Model Parameters (static data):
Parameter Value(s)
---------------------------- ----------------------------------------------------------
align-type 0
clean-type 0
color-cal-type 0
copy-type 0
embedded-server-type 1
fax-type 0
fw-download False
icon HP_LaserJet_4000.png
io-mfp-mode 3
io-mode 1
io-support 2
job-storage 0
linefeed-cal-type 0
model HP_LaserJet_4050_Series
model-ui HP LaserJet 4050 Series
model1 HP LaserJet 4050 Printer
model2 HP LaserJet 4050n Printer
model3 HP LaserJet 4050se Printer
model4 HP LaserJet 4050t Printer
model5 HP LaserJet 4050tn Printer
monitor-type 0
panel-check-type 1
pcard-type 0
plugin 0
plugin-reason 0
power-settings 0
pq-diag-type 0
r-type 0
r0-agent1-kind 4
r0-agent1-sku C4127A/C4127X
r0-agent1-type 1
scan-src 0
scan-type 0
status-battery-check 0
status-dynamic-counters 0
status-type 9
support-released True
support-subtype 13817
support-type 2
support-ver 0.9.5
tech-class ['LJMono', 'Postscript']
tech-subclass ['Normal']
tech-type 3
usb-pid 0
usb-vid 1008
wifi-config 0
Status History (most recent first):
Date/Time Code Status Description User Job ID
-------------------- ----- ---------------------------------------- -------- --------
08/04/19 18:25:50 1801 Low paper jochen 0
Done.
jochen@LT-SAM02:~$
jochen@LT-SAM02:~$ hp-check -r
Saving output in log file: /home/jochen/hp-check.log
HP Linux Imaging and Printing System (ver. 3.17.10)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper
dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied
tarball has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time
dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: 12-18.04 version is not supported. Using 12-17.04 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 4.15.0-55-generic #60-Ubuntu SMP Tue Jul 2 18:22:20 UTC 2019 GNU/Linux
Host: LT-SAM02
Proc: 4.15.0-55-generic #60-Ubuntu SMP Tue Jul 2 18:22:20 UTC 2019 GNU/Linux
Distribution: 12 18.04
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.17.10
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for 12 distro 18.04 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.17.10
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.17.10
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[commands]
scan = /usr/bin/simple-scan %SANE_URI%
[fax]
email_address =
voice_phone =
[installation]
date_time = 08/04/19 18:26:11
version = 3.17.10
[last_used]
device_uri = hp:/net/HP_LaserJet_4050_Series?ip=192.168.1.200
printer_name = HP_LaserJet_4050_tn
working_dir = .
[polling]
device_list =
enable = false
interval = 5
[refresh]
enable = false
rate = 30
type = 1
[settings]
systray_messages = 1
systray_visible = 1
[upgrade]
last_upgraded_time = 1484353068
notify_upgrade = true
pending_upgrade_time = 0
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
cups CUPS - Common Unix Printing System REQUIRED 1.1 2.2.7 OK 'CUPS Scheduler is running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.26 OK -
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.27 OK -
dbus DBus - Message bus system REQUIRED - 1.12.2 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.19.4 OK -
avahi-utils avahi-utils OPTIONAL - 0.7 OK -
------------------------
| General Dependencies |
------------------------
libjpeg libjpeg - JPEG library REQUIRED - - OK -
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.2.7 OK -
cups-image CUPS image - CUPS image development files REQUIRED - 2.2.7 OK -
libpthread libpthread - POSIX threads library REQUIRED - b'2.27' OK -
libusb libusb - USB library REQUIRED - 1.0 OK -
sane SANE - Scanning library REQUIRED - - OK -
error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed'
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.7.3 OK -
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 OK -
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.6.8 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.6 OK -
python3-xml Python XML libraries REQUIRED - 2.2.5 OK -
error: python3-devel Python devel - Python development files REQUIRED 2.2 3.6.8 MISSING 'python3-devel needs to be installed'
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.4.0 OK -
--------------
| COMPILEDEP |
--------------
libtool libtool - Library building support services REQUIRED - 2.4.6 OK -
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 7.4.0 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.1 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.17.10 OK -
hpmudext IO-Extension REQUIRED - 3.17.10 OK -
----------------------
| Scan Configuration |
----------------------
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend REQUIRED - 3.17.10 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.17.10 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `brother3:net1;dev0' is a Brother MFC-5895CW MFC-5895CW
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
Canon-MF8100-Series-(FAX)
-------------------------
Type: Unknown
Device URI: usb://Canon/MF8100%20Series%20(FAX)?serial=2168SDRK0205&interface=2
PPD: /etc/cups/ppd/Canon-MF8100-Series-(FAX).ppd
PPD Description: Canon i70 - CUPS+Gutenprint v5.2.13
Printer status: Drucker Canon-MF8100-Series-(FAX) ist im Leerlauf. Aktiviert seit So 05 Mär 2017 04:35:25 CET
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
HP_LaserJet_4050
----------------
Type: Printer
Device URI: hp:/net/HP_LaserJet_4050_Series?ip=192.168.1.200
PPD: /etc/cups/ppd/HP_LaserJet_4050.ppd
PPD Description: HP LaserJet 4050 Series Postscript (recommended)
Printer status: Drucker HP_LaserJet_4050 ist im Leerlauf. Aktiviert seit So 04 Aug 2019 17:05:28 CEST
Communication status: Good
HP_LaserJet_4050_2
------------------
Type: Printer
Device URI: hp:/net/HP_LaserJet_4050_Series?ip=192.168.1.200
PPD: /etc/cups/ppd/HP_LaserJet_4050_2.ppd
PPD Description: HP LaserJet 4050 Series Postscript (recommended)
Printer Backend /usr/lib/cups/backend/hp does not exist!rt seit So 04 Aug 2019 14:58:07 CEST
Communication status: Good
MFC5895CW
---------
Type: Unknown
Device URI: socket://192.168.1.207
PPD: /etc/cups/ppd/MFC5895CW.ppd
PPD Description: Brother MFC-5895CW CUPS v1.1
Printer status: Drucker MFC5895CW ist im Leerlauf. Aktiviert seit Sa 06 Apr 2019 13:31:24 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
Roger-Router-Fax
----------------
Type: Unknown
Device URI: roger-cups:/
PPD: /etc/cups/ppd/Roger-Router-Fax.ppd
PPD Description: roger fax printer, 1.0
Printer status: Drucker Roger-Router-Fax ist im Leerlauf. Aktiviert seit Sa 01 Apr 2017 19:08:31 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
--------------
| PERMISSION |
--------------
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'libsane-dev' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'python3-dev' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'python3-dbus.mainloop.qt' package is missing/incompatible
Total Errors: 4
Total Warnings: 3
Done.
jochen@LT-SAM02:~$
jochen@LT-SAM02:~$ Wenn sich jemand gut auskennt .... In dem Durcker gibt es die Möglichkeit "Scannen in Netzwerkordner". Was muss ich dort eintragen ?
Ordner ist mit NFS freigegeben. Gruß Jochen
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Ich fürchte so wird das nichts 😊 Siehe mal Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories.
libsane-dev : Hängt ab von: libsane1 (= 1.0.27-1~experimental3ubuntu2.1) aber 1.0.27+git20180630-artful0 soll installiert werden
HP_LaserJet_4050_2
------------------
Type: Printer
Device URI: hp:/net/HP_LaserJet_4050_Series?ip=192.168.1.200
PPD: /etc/cups/ppd/HP_LaserJet_4050_2.ppd
PPD Description: HP LaserJet 4050 Series Postscript (recommended)
Printer Backend /usr/lib/cups/backend/hp does not exist!rt seit So 04 Aug 2019 14:58:07 CEST
Communication status: Good Du kannst nicht einfach eine höhere Version von HPLIP Installieren,wenn die "alte Version" (3.17.10) noch drauf ist. Außerdem musst du erst mal die Sane Pakete deinstallieren – weil Artful war "Gestern"! Das wird ansonsten nie was! Erst alles komplett deinstallieren. Die Paketquellen freischalten und die sources.list anpassen/Reinigen, dann sauber Installieren ☺ Gruß Stephan
|
jochenv
(Themenstarter)
Anmeldungsdatum: 23. April 2016
Beiträge: 634
Wohnort: Kurhessen
|
Hallo Stephan ... ich habe es befürchtet ... libsane-dev habe ich schon versucht zu deinstallieren, ist nicht vorhanden.
Außerdem musst du erst mal die Sane Pakete deinstallieren – weil Artful war "Gestern"! Das wird ansonsten nie was! Erst alles komplett deinstallieren.
ist das Paket sane zu entfernen oder muss da noch mehr runter ? Die Paketquellen freischalten und die sources.list anpassen/Reinigen, dann sauber Installieren ☺
ok ... hier mal die sources.list
jochen@LT-SAM02:~$ cat /etc/apt/sources.list
# deb cdrom:[Ubuntu-MATE 16.10 _Yakkety Yak_ - Release amd64 (20161012.1)]/ yakkety main multiverse restricted universe
# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
deb http://de.archive.ubuntu.com/ubuntu/ bionic main restricted
# deb-src http://de.archive.ubuntu.com/ubuntu/ yakkety main restricted
## Major bug fix updates produced after the final release of the
## distribution.
deb http://de.archive.ubuntu.com/ubuntu/ bionic-updates main restricted
# deb-src http://de.archive.ubuntu.com/ubuntu/ yakkety-updates main restricted
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team. Also, please note that software in universe WILL NOT receive any
## review or updates from the Ubuntu security team.
deb http://de.archive.ubuntu.com/ubuntu/ bionic universe
# deb-src http://de.archive.ubuntu.com/ubuntu/ yakkety universe
deb http://de.archive.ubuntu.com/ubuntu/ bionic-updates universe
# deb-src http://de.archive.ubuntu.com/ubuntu/ yakkety-updates universe
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## multiverse WILL NOT receive any review or updates from the Ubuntu
## security team.
deb http://de.archive.ubuntu.com/ubuntu/ bionic multiverse
# deb-src http://de.archive.ubuntu.com/ubuntu/ yakkety multiverse
deb http://de.archive.ubuntu.com/ubuntu/ bionic-updates multiverse
# deb-src http://de.archive.ubuntu.com/ubuntu/ yakkety-updates multiverse
## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful features.
## Also, please note that software in backports WILL NOT receive any review
## or updates from the Ubuntu security team.
deb http://de.archive.ubuntu.com/ubuntu/ bionic-backports main restricted universe multiverse
# deb-src http://de.archive.ubuntu.com/ubuntu/ yakkety-backports main restricted universe multiverse
## Uncomment the following two lines to add software from Canonical's
## 'partner' repository.
## This software is not part of Ubuntu, but is offered by Canonical and the
## respective vendors as a service to Ubuntu users.
# deb http://archive.canonical.com/ubuntu yakkety partner
# deb-src http://archive.canonical.com/ubuntu yakkety partner
deb http://security.ubuntu.com/ubuntu bionic-security main restricted
# deb-src http://security.ubuntu.com/ubuntu yakkety-security main restricted
deb http://security.ubuntu.com/ubuntu bionic-security universe
# deb-src http://security.ubuntu.com/ubuntu yakkety-security universe
deb http://security.ubuntu.com/ubuntu bionic-security multiverse
# deb-src http://security.ubuntu.com/ubuntu yakkety-security multiverse
jochen@LT-SAM02:~$ Kann ich da alle geremten Zeilen löschen ? Gruß Jochen
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Suche die zu löschenden Sane Pakete am besten mal so dpkg -l *sane | grep ii Das zeigt dir dann die Installierten Pakete an. Die sources.list kannst du so lassen,die Paketquellen von Yakkety sind schon "Deaktiviert" # deb-src http://de.archive.ubuntu.com/ubuntu/ yakkety main restricted
|
jochenv
(Themenstarter)
Anmeldungsdatum: 23. April 2016
Beiträge: 634
Wohnort: Kurhessen
|
Kellerkind_2009 schrieb: Suche die zu löschenden Sane Pakete am besten mal so dpkg -l *sane | grep ii Das zeigt dir dann die Installierten Pakete an.
jochen@LT-SAM02:~$ dpkg -l *sane | grep ii
ii sane 1.0.14-12build1 amd64 scanner graphical frontends
ii xsane 0.999-5ubuntu2 amd64 featureful graphical frontend for SANE (Scanner Access Now Easy)
jochen@LT-SAM02:~$ das ist alles ??? Gruß Jochen
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Wir sehen jetzt mal genauer nach was bei dir so ist. Zeige bitte sudo apt-get -f install && sudo apt-get update && sudo apt-get dist-upgrade dpkg -l | egrep -v '^ii|rc' grep -P '^[ \t]*[^#[ \t]+' /etc/apt/sources.list /etc/apt/sources.list.d/*.list dpkg -l | egrep HP
|
jochenv
(Themenstarter)
Anmeldungsdatum: 23. April 2016
Beiträge: 634
Wohnort: Kurhessen
|
guten Morgen Kellerkind_2009 schrieb: Wir sehen jetzt mal genauer nach was bei dir so ist. Zeige bitte sudo apt-get -f install && sudo apt-get update && sudo apt-get dist-upgrade
jochen@LT-SAM02:~$ sudo apt-get -f install && sudo apt-get update && sudo apt-get dist-upgrade
[sudo] Passwort für jochen:
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Das folgende Paket wurde automatisch installiert und wird nicht mehr benötigt:
xsane-common
Verwenden Sie »sudo apt autoremove«, um es zu entfernen.
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 11 nicht aktualisiert.
OK:1 http://de.archive.ubuntu.com/ubuntu bionic InRelease
Holen:2 http://de.archive.ubuntu.com/ubuntu bionic-updates InRelease [88,7 kB]
Holen:3 http://de.archive.ubuntu.com/ubuntu bionic-backports InRelease [74,6 kB]
Holen:4 http://security.ubuntu.com/ubuntu bionic-security InRelease [88,7 kB]
Es wurden 252 kB in 1 s geholt (263 kB/s).
Paketlisten werden gelesen... Fertig
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Paketaktualisierung (Upgrade) wird berechnet... Fertig
Das folgende Paket wurde automatisch installiert und wird nicht mehr benötigt:
xsane-common
Verwenden Sie »sudo apt autoremove«, um es zu entfernen.
Die folgenden Pakete werden aktualisiert (Upgrade):
libnss-resolve libnss-systemd libpam-systemd libsystemd0 libsystemd0:i386
libudev-dev libudev1 libudev1:i386 systemd systemd-sysv udev
11 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
Es müssen 4.891 kB an Archiven heruntergeladen werden.
Nach dieser Operation werden 4.096 B Plattenplatz zusätzlich benutzt.
Möchten Sie fortfahren? [J/n] j
Holen:1 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libnss-systemd amd64 237-3ubuntu10.25 [105 kB]
Holen:2 http://de.archive.ubuntu.com/ubuntu bionic-updates/universe amd64 libnss-resolve amd64 237-3ubuntu10.25 [107 kB]
Holen:3 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libudev1 amd64 237-3ubuntu10.25 [53,5 kB]
Holen:4 http://de.archive.ubuntu.com/ubuntu bionic-updates/main i386 libudev1 i386 237-3ubuntu10.25 [57,1 kB]
Holen:5 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libudev-dev amd64 237-3ubuntu10.25 [19,1 kB]
Holen:6 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 udev amd64 237-3ubuntu10.25 [1.101 kB]
Holen:7 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libpam-systemd amd64 237-3ubuntu10.25 [108 kB]
Holen:8 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 systemd amd64 237-3ubuntu10.25 [2.903 kB]
Holen:9 http://de.archive.ubuntu.com/ubuntu bionic-updates/main i386 libsystemd0 i386 237-3ubuntu10.25 [221 kB]
Holen:10 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libsystemd0 amd64 237-3ubuntu10.25 [204 kB]
Holen:11 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 systemd-sysv amd64 237-3ubuntu10.25 [11,4 kB]
Es wurden 4.891 kB in 1 s geholt (7.060 kB/s).
(Lese Datenbank ... 330562 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von .../libnss-systemd_237-3ubuntu10.25_amd64.deb ...
Entpacken von libnss-systemd:amd64 (237-3ubuntu10.25) über (237-3ubuntu10.24) ...
Vorbereitung zum Entpacken von .../libnss-resolve_237-3ubuntu10.25_amd64.deb ...
Entpacken von libnss-resolve:amd64 (237-3ubuntu10.25) über (237-3ubuntu10.24) ...
Vorbereitung zum Entpacken von .../libudev1_237-3ubuntu10.25_i386.deb ...
libudev1:amd64 (237-3ubuntu10.24) wird de-konfiguriert ...
Entpacken von libudev1:i386 (237-3ubuntu10.25) über (237-3ubuntu10.24) ...
Vorbereitung zum Entpacken von .../libudev1_237-3ubuntu10.25_amd64.deb ...
Entpacken von libudev1:amd64 (237-3ubuntu10.25) über (237-3ubuntu10.24) ...
libudev1:amd64 (237-3ubuntu10.25) wird eingerichtet ...
libudev1:i386 (237-3ubuntu10.25) wird eingerichtet ...
(Lese Datenbank ... 330562 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von .../0-libudev-dev_237-3ubuntu10.25_amd64.deb ...
Entpacken von libudev-dev:amd64 (237-3ubuntu10.25) über (237-3ubuntu10.24) ...
Vorbereitung zum Entpacken von .../1-udev_237-3ubuntu10.25_amd64.deb ...
Entpacken von udev (237-3ubuntu10.25) über (237-3ubuntu10.24) ...
Vorbereitung zum Entpacken von .../2-libpam-systemd_237-3ubuntu10.25_amd64.deb ...
Entpacken von libpam-systemd:amd64 (237-3ubuntu10.25) über (237-3ubuntu10.24) ...
Vorbereitung zum Entpacken von .../3-systemd_237-3ubuntu10.25_amd64.deb ...
Entpacken von systemd (237-3ubuntu10.25) über (237-3ubuntu10.24) ...
Vorbereitung zum Entpacken von .../4-libsystemd0_237-3ubuntu10.25_amd64.deb ...
libsystemd0:i386 (237-3ubuntu10.24) wird de-konfiguriert ...
Entpacken von libsystemd0:amd64 (237-3ubuntu10.25) über (237-3ubuntu10.24) ...
Vorbereitung zum Entpacken von .../5-libsystemd0_237-3ubuntu10.25_i386.deb ...
Entpacken von libsystemd0:i386 (237-3ubuntu10.25) über (237-3ubuntu10.24) ...
libsystemd0:amd64 (237-3ubuntu10.25) wird eingerichtet ...
libsystemd0:i386 (237-3ubuntu10.25) wird eingerichtet ...
systemd (237-3ubuntu10.25) wird eingerichtet ...
Job for systemd-resolved.service failed because a timeout was exceeded.
See "systemctl status systemd-resolved.service" and "journalctl -xe" for details.
Job for systemd-timesyncd.service failed because a timeout was exceeded.
See "systemctl status systemd-timesyncd.service" and "journalctl -xe" for details.
(Lese Datenbank ... 330562 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von .../systemd-sysv_237-3ubuntu10.25_amd64.deb ...
Entpacken von systemd-sysv (237-3ubuntu10.25) über (237-3ubuntu10.24) ...
libnss-systemd:amd64 (237-3ubuntu10.25) wird eingerichtet ...
Trigger für ureadahead (0.100.0-21) werden verarbeitet ...
ureadahead will be reprofiled on next reboot
systemd-sysv (237-3ubuntu10.25) wird eingerichtet ...
Trigger für libc-bin (2.27-3ubuntu1) werden verarbeitet ...
udev (237-3ubuntu10.25) wird eingerichtet ...
update-initramfs: deferring update (trigger activated)
libnss-resolve:amd64 (237-3ubuntu10.25) wird eingerichtet ...
Trigger für man-db (2.8.3-2ubuntu0.1) werden verarbeitet ...
Trigger für dbus (1.12.2-1ubuntu1.1) werden verarbeitet ...
libudev-dev:amd64 (237-3ubuntu10.25) wird eingerichtet ...
libpam-systemd:amd64 (237-3ubuntu10.25) wird eingerichtet ...
Trigger für initramfs-tools (0.130ubuntu3.8) werden verarbeitet ...
update-initramfs: Generating /boot/initrd.img-4.15.0-55-generic
Trigger für libc-bin (2.27-3ubuntu1) werden verarbeitet ...
jochen@LT-SAM02:~$ ´ dpkg -l | egrep -v '^ii|rc'
jochen@LT-SAM02:~$ dpkg -l | egrep -v '^ii|rc'
Gewünscht=Unbekannt/Installieren/R=Entfernen/P=Vollständig Löschen/Halten
| Status=Nicht/Installiert/Config/U=Entpackt/halb konFiguriert/
Halb installiert/Trigger erWartet/Trigger anhängig
|/ Fehler?=(kein)/R=Neuinstallation notwendig (Status, Fehler: GROSS=schlecht)
+++-=============================================-===================================================-============-=====================================================================================
jochen@LT-SAM02:~$ grep -P '^[ \t]*[^#[ \t]+' /etc/apt/sources.list /etc/apt/sources.list.d/*.list
jochen@LT-SAM02:~$ grep -P '^[ \t]*[^#[ \t]+' /etc/apt/sources.list /etc/apt/sources.list.d/*.list
/etc/apt/sources.list:deb http://de.archive.ubuntu.com/ubuntu/ bionic main restricted
/etc/apt/sources.list:deb http://de.archive.ubuntu.com/ubuntu/ bionic-updates main restricted
/etc/apt/sources.list:deb http://de.archive.ubuntu.com/ubuntu/ bionic universe
/etc/apt/sources.list:deb http://de.archive.ubuntu.com/ubuntu/ bionic-updates universe
/etc/apt/sources.list:deb http://de.archive.ubuntu.com/ubuntu/ bionic multiverse
/etc/apt/sources.list:deb http://de.archive.ubuntu.com/ubuntu/ bionic-updates multiverse
/etc/apt/sources.list:deb http://de.archive.ubuntu.com/ubuntu/ bionic-backports main restricted universe multiverse
/etc/apt/sources.list:deb http://security.ubuntu.com/ubuntu bionic-security main restricted
/etc/apt/sources.list:deb http://security.ubuntu.com/ubuntu bionic-security universe
/etc/apt/sources.list:deb http://security.ubuntu.com/ubuntu bionic-security multiverse
jochen@LT-SAM02:~$ dpkg -l | egrep HP
jochen@LT-SAM02:~$ dpkg -l | egrep HP
ii hp2xx 3.4.4-10.1build1 amd64 HPGL converter into some vector- and raster formats
ii hplip 3.17.10+repack0-5 amd64 HP Linux Printing and Imaging System (HPLIP)
ii hplip-data 3.17.10+repack0-5 all HP Linux Printing and Imaging - data files
ii hplip-gui 3.17.10+repack0-5 all HP Linux Printing and Imaging - GUI utilities (Qt-based)
ii libhpmud0:amd64 3.17.10+repack0-5 amd64 HP Multi-Point Transport Driver (hpmud) run-time libraries
ii libsane-hpaio:amd64 3.17.10+repack0-5 amd64 HP SANE backend for multi-function peripherals
ii printer-driver-hpcups 3.17.10+repack0-5 amd64 HP Linux Printing and Imaging - CUPS Raster driver (hpcups)
ii printer-driver-hpijs 3.17.10+repack0-5 amd64 HP Linux Printing and Imaging - printer driver (hpijs)
ii printer-driver-pnm2ppa 1.13+nondbs-0ubuntu6 amd64 printer driver for HP-GDI printers
ii printer-driver-postscript-hp 3.17.10+repack0-5 all HP Printers PostScript Descriptions
ii printer-driver-pxljr 1.4+repack0-5 amd64 printer driver for HP Color LaserJet 35xx/36xx
jochen@LT-SAM02:~$ sane und xsane sind noch deinstalliert Gruß Jochen
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Ok,das sieht bist hier alles gut aus.HP mal deinstallieren mit sudo apt-get -s purge hplip hplip-data libhpmud0 libsane-hpaio printer-driver-hpcups hplip-gui printer-driver-hpcups printer-driver-pnm2ppa printer-driver-postscript-hp Das ist erst mal nur eine Simulation.Sehe dir genau an was gelöscht werden würde. Zum richtigen löschen dann sudo apt-get purge hplip hplip-data libhpmud0 libsane-hpaio printer-driver-hpcups hplip-gui printer-driver-hpcups printer-driver-pnm2ppa printer-driver-postscript-hp Neustart.Wichtig bevor du dann HP manuell Installierst.
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Hat alles geklappt? Offene Fragen?
|
jochenv
(Themenstarter)
Anmeldungsdatum: 23. April 2016
Beiträge: 634
Wohnort: Kurhessen
|
Hallo Kellerkind_2009 schrieb: Hat alles geklappt? Offene Fragen?
Sorry, hat wegen Arbeit nicht früher geklappt. jochen@LT-SAM02:~$ sudo apt-get -s purge hplip hplip-data libhpmud0 libsane-hpaio printer-driver-hpcups hplip-gui printer-driver-hpcups printer-driver-pnm2ppa printer-driver-postscript-hp
[sudo] Passwort für jochen:
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt:
libqt5designer5 libqt5help5 libqt5sql5 libqt5sql5-sqlite libqt5test5
python3-dbus.mainloop.pyqt5 python3-notify2 python3-pyqt5 xsane-common
Verwenden Sie »sudo apt autoremove«, um sie zu entfernen.
Die folgenden Pakete werden ENTFERNT:
hplip* hplip-data* hplip-gui* libhpmud0* libsane-hpaio*
printer-driver-hpcups* printer-driver-hpijs* printer-driver-pnm2ppa*
printer-driver-postscript-hp*
0 aktualisiert, 0 neu installiert, 9 zu entfernen und 0 nicht aktualisiert.
Purg hplip-gui [3.17.10+repack0-5]
Purg printer-driver-postscript-hp [3.17.10+repack0-5]
Purg hplip [3.17.10+repack0-5]
Purg hplip-data [3.17.10+repack0-5]
Purg printer-driver-hpijs [3.17.10+repack0-5]
Purg printer-driver-hpcups [3.17.10+repack0-5]
Purg libhpmud0 [3.17.10+repack0-5] [libsane-hpaio:amd64 ]
Purg libsane-hpaio [3.17.10+repack0-5]
Purg printer-driver-pnm2ppa [1.13+nondbs-0ubuntu6]
jochen@LT-SAM02:~$ und jochen@LT-SAM02:~$ sudo apt-get purge hplip hplip-data libhpmud0 libsane-hpaio printer-driver-hpcups hplip-gui printer-driver-hpcups printer-driver-pnm2ppa printer-driver-postscript-hp
[sudo] Passwort für jochen:
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt:
libqt5designer5 libqt5help5 libqt5sql5 libqt5sql5-sqlite libqt5test5
python3-dbus.mainloop.pyqt5 python3-notify2 python3-pyqt5 xsane-common
Verwenden Sie »sudo apt autoremove«, um sie zu entfernen.
Die folgenden Pakete werden ENTFERNT:
hplip* hplip-data* hplip-gui* libhpmud0* libsane-hpaio*
printer-driver-hpcups* printer-driver-hpijs* printer-driver-pnm2ppa*
printer-driver-postscript-hp*
0 aktualisiert, 0 neu installiert, 9 zu entfernen und 0 nicht aktualisiert.
Nach dieser Operation werden 21,1 MB Plattenplatz freigegeben.
Möchten Sie fortfahren? [J/n]
(Lese Datenbank ... 330560 Dateien und Verzeichnisse sind derzeit installiert.)
Entfernen von hplip-gui (3.17.10+repack0-5) ...
Entfernen von printer-driver-postscript-hp (3.17.10+repack0-5) ...
Entfernen von hplip (3.17.10+repack0-5) ...
Entfernen von hplip-data (3.17.10+repack0-5) ...
dpkg: Warnung: Während Entfernens von hplip-data ist Verzeichnis »/usr/share/hplip/ui5« nicht leer, wird daher nicht gelöscht
dpkg: Warnung: Während Entfernens von hplip-data ist Verzeichnis »/usr/share/hplip/scan« nicht leer, wird daher nicht gelöscht
dpkg: Warnung: Während Entfernens von hplip-data ist Verzeichnis »/usr/share/hplip/prnt« nicht leer, wird daher nicht gelöscht
dpkg: Warnung: Während Entfernens von hplip-data ist Verzeichnis »/usr/share/hplip/pcard« nicht leer, wird daher nicht gelöscht
dpkg: Warnung: Während Entfernens von hplip-data ist Verzeichnis »/usr/share/hplip/installer« nicht leer, wird daher nicht gelöscht
dpkg: Warnung: Während Entfernens von hplip-data ist Verzeichnis »/usr/share/hplip/fax« nicht leer, wird daher nicht gelöscht
dpkg: Warnung: Während Entfernens von hplip-data ist Verzeichnis »/usr/share/hplip/copier« nicht leer, wird daher nicht gelöscht
dpkg: Warnung: Während Entfernens von hplip-data ist Verzeichnis »/usr/share/hplip/base/pexpect« nicht leer, wird daher nicht gelöscht
Entfernen von printer-driver-hpijs (3.17.10+repack0-5) ...
Entfernen von printer-driver-hpcups (3.17.10+repack0-5) ...
Entfernen von libsane-hpaio:amd64 (3.17.10+repack0-5) ...
Entfernen von printer-driver-pnm2ppa (1.13+nondbs-0ubuntu6) ...
Entfernen von libhpmud0:amd64 (3.17.10+repack0-5) ...
Trigger für mime-support (3.60ubuntu1) werden verarbeitet ...
Trigger für desktop-file-utils (0.23-1ubuntu3.18.04.2) werden verarbeitet ...
Trigger für cups (2.2.7-1ubuntu2.6) werden verarbeitet ...
Trigger für bamfdaemon (0.5.3+18.04.20180207.2-0ubuntu1) werden verarbeitet ...
Rebuilding /usr/share/applications/bamf-2.index...
Trigger für libc-bin (2.27-3ubuntu1) werden verarbeitet ...
Trigger für man-db (2.8.3-2ubuntu0.1) werden verarbeitet ...
Trigger für gnome-menus (3.13.3-11ubuntu1.1) werden verarbeitet ...
Trigger für dbus (1.12.2-1ubuntu1.1) werden verarbeitet ...
(Lese Datenbank ... 329775 Dateien und Verzeichnisse sind derzeit installiert.)
Löschen der Konfigurationsdateien von hplip (3.17.10+repack0-5) ...
Löschen der Konfigurationsdateien von printer-driver-pnm2ppa (1.13+nondbs-0ubuntu6) ...
Löschen der Konfigurationsdateien von hplip-gui (3.17.10+repack0-5) ...
Löschen der Konfigurationsdateien von libsane-hpaio:amd64 (3.17.10+repack0-5) ...
dpkg: Warnung: Während Entfernens von libsane-hpaio:amd64 ist Verzeichnis »/usr/share/hplip« nicht leer, wird daher nicht gelöscht
Trigger für dbus (1.12.2-1ubuntu1.1) werden verarbeitet ...
jochen@LT-SAM02:~$ sieht soweit gut aus ... was ist mit dem Verzeichnis ? soll ich dies von Hand löschen ??? Warnung: Während Entfernens von hplip-data ist Verzeichnis »/usr/share/hplip/...« nicht leer, wird daher nicht gelöscht ich lasse noch autoremove durchlaufen ... sudo apt autoremove jetzt Neustart und hplip-3.19.6 neu installieren ??? Gruß Jochen
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Sollte einentlich weg/leer sein.Sicherheitshalber noch sudo rm -r /usr/share/hplip Dann würde ich vor der Manuellen Installation noch sudo apt-get install build-essential libusb-dev libcupsimage2-dev libcupsfilters-dev libusb-1.0-0-dev libtiff-dev libjpeg-dev libusb-0.1-4 cups-bsd python3-pil python3-dbus.mainloop.qt python3-dbus Danach kannst du 3.19.6 Installieren
|
jochenv
(Themenstarter)
Anmeldungsdatum: 23. April 2016
Beiträge: 634
Wohnort: Kurhessen
|
hallo Kellerkind_2009 schrieb: Sollte einentlich weg/leer sein.Sicherheitshalber noch sudo rm -r /usr/share/hplip Dann würde ich vor der Manuellen Installation noch sudo apt-get install build-essential libusb-dev libcupsimage2-dev libcupsfilters-dev libusb-1.0-0-dev libtiff-dev libjpeg-dev libusb-0.1-4 cups-bsd python3-pil python3-dbus.mainloop.qt python3-dbus Danach kannst du 3.19.6 Installieren
einmal
jochen@LT-SAM02:~$ sudo apt update && sudo apt upgrade
OK:1 http://de.archive.ubuntu.com/ubuntu bionic InRelease
Holen:2 http://security.ubuntu.com/ubuntu bionic-security InRelease [88,7 kB]
Holen:3 http://de.archive.ubuntu.com/ubuntu bionic-updates InRelease [88,7 kB]
Holen:4 http://de.archive.ubuntu.com/ubuntu bionic-backports InRelease [74,6 kB]
Es wurden 252 kB in 1 s geholt (260 kB/s).
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Alle Pakete sind aktuell.
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Paketaktualisierung (Upgrade) wird berechnet... Fertig
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
jochen@LT-SAM02:~$ sudo rm -r /usr/share/hplip
jochen@LT-SAM02:~$ sudo apt-get install build-essential libusb-dev libcupsimage2-dev libcupsfilters-dev libusb-1.0-0-dev libtiff-dev libjpeg-dev libusb-0.1-4 cups-bsd python3-pil python3-dbus.mainloop.qt python3-dbus
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
build-essential ist schon die neueste Version (12.4ubuntu1).
libjpeg-dev ist schon die neueste Version (8c-2ubuntu8).
libusb-0.1-4 ist schon die neueste Version (2:0.1.12-31).
libusb-1.0-0-dev ist schon die neueste Version (2:1.0.21-2).
python3-dbus ist schon die neueste Version (1.2.6-1).
python3-pil ist schon die neueste Version (5.1.0-1).
cups-bsd ist schon die neueste Version (2.2.7-1ubuntu2.6).
libcupsfilters-dev ist schon die neueste Version (1.20.2-0ubuntu3.1).
libcupsfilters-dev wurde als manuell installiert festgelegt.
libcupsimage2-dev ist schon die neueste Version (2.2.7-1ubuntu2.6).
libtiff-dev ist schon die neueste Version (4.0.9-5ubuntu0.2).
libtiff-dev wurde als manuell installiert festgelegt.
Die folgenden NEUEN Pakete werden installiert:
libusb-dev python3-dbus.mainloop.qt
0 aktualisiert, 2 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
Es müssen 43,1 kB an Archiven heruntergeladen werden.
Nach dieser Operation werden 300 kB Plattenplatz zusätzlich benutzt.
Möchten Sie fortfahren? [J/n]
Holen:1 http://de.archive.ubuntu.com/ubuntu bionic/main amd64 libusb-dev amd64 2:0.1.12-31 [30,2 kB]
Holen:2 http://de.archive.ubuntu.com/ubuntu bionic/universe amd64 python3-dbus.mainloop.qt amd64 4.12.1+dfsg-2 [13,0 kB]
Es wurden 43,1 kB in 0 s geholt (222 kB/s).
Vormals nicht ausgewähltes Paket libusb-dev wird gewählt.
(Lese Datenbank ... 329517 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von .../libusb-dev_2%3a0.1.12-31_amd64.deb ...
Entpacken von libusb-dev (2:0.1.12-31) ...
Vormals nicht ausgewähltes Paket python3-dbus.mainloop.qt wird gewählt.
Vorbereitung zum Entpacken von .../python3-dbus.mainloop.qt_4.12.1+dfsg-2_amd64.deb ...
Entpacken von python3-dbus.mainloop.qt (4.12.1+dfsg-2) ...
libusb-dev (2:0.1.12-31) wird eingerichtet ...
Trigger für man-db (2.8.3-2ubuntu0.1) werden verarbeitet ...
python3-dbus.mainloop.qt (4.12.1+dfsg-2) wird eingerichtet ...
jochen@LT-SAM02:~$ und nun hplib... jochen@LT-SAM02:~/Downloads/hp$ ./hplip-3.19.6.run
Creating directory hplip-3.19.6
Verifying archive integrity... All good.
Uncompressing HPLIP 3.19.6 Self Extracting Archive...........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
HP Linux Imaging and Printing System (ver. 3.19.6)
HPLIP Installer ver. 5.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Installer log saved in: hplip-install_Fri-09-Aug-2019_23:37:51.log
\
note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.
INSTALLATION MODE
-----------------
Automatic mode will install the full HPLIP solution with the most common options.
Custom mode allows you to choose installation options to fit specific requirements.
Please choose the installation mode (a=automatic*, c=custom, q=quit) :
INTRODUCTION
------------
This installer will install HPLIP version 3.19.6 on your computer.
Please close any running package management systems now (YaST, Adept, Synaptic, Up2date, etc).
DISTRO/OS CONFIRMATION
----------------------
Distro appears to be Ubuntu 18.04.
Is "Ubuntu 18.04" your correct distro/OS and version (y=yes*, n=no, q=quit) ?
Initializing. Please wait...
ENTER USER PASSWORD
-------------------
Please enter the sudoer (jochen)'s password:
INSTALLATION NOTES
------------------
Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information. Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.
Please read the installation notes. Press <enter> to continue or 'q' to quit:
SECURITY PACKAGES
-----------------
AppArmor is installed.
AppArmor protects the application from external intrusion attempts making the application secure
Would you like to have this installer install the hplip specific policy/profile (y=yes*, n=no, q=quit) ?
RUNNING PRE-INSTALL COMMANDS
----------------------------
OK
MISSING DEPENDENCIES
--------------------
Following dependencies are not installed. HPLIP will not work if all REQUIRED dependencies are not installed and some of the HPLIP features will not work if OPTIONAL dependencies are not installed.
Package-Name Component Required/Optional
sane-devel scan REQUIRED
xsane scan OPTIONAL
Do you want to install these missing dependencies (y=yes*, n=no, q=quit) ?
INSTALL MISSING REQUIRED DEPENDENCIES
-------------------------------------
note: Installation of dependencies requires an active internet connection.
warning: Missing REQUIRED dependency: sane-devel (SANE - Scanning library development files)
INSTALL MISSING OPTIONAL DEPENDENCIES
-------------------------------------
note: Installation of dependencies requires an active internet connection.
warning: Missing OPTIONAL dependency for option 'scan': xsane (xsane - Graphical scanner frontend for SANE)
CHECKING FOR NETWORK CONNECTION
-------------------------------
Network connection present.
RUNNING PRE-PACKAGE COMMANDS
----------------------------
sudo dpkg --configure -a (Pre-depend step 1)
sudo apt-get install --yes --force-yes -f (Pre-depend step 2)
sudo apt-get update (Pre-depend step 3)
OK
DEPENDENCY AND CONFLICT RESOLUTION
----------------------------------
Running 'sudo apt-get install --assume-yes libsane-dev'
Please wait, this may take several minutes...
error: Command failed. Re-try #1...
Running 'sudo apt-get install --assume-yes libsane-dev'
Please wait, this may take several minutes...
error: Command failed. Re-try #2...
Running 'sudo apt-get install --assume-yes libsane-dev'
Please wait, this may take several minutes...
error: Command failed. Re-try #3...
Running 'sudo apt-get install --assume-yes libsane-dev'
Please wait, this may take several minutes...
error: Package install command failed with error code 100
Would you like to retry installing the missing package(s) (y=yes*, n=no, q=quit) ? bleibt an der gleichen stelle hängen. Gruß Jochen
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Wollte gerade abschalten 😬 Zeige mal dpkg -l libsane* | grep ii sudo apt install libsane-dev
|
jochenv
(Themenstarter)
Anmeldungsdatum: 23. April 2016
Beiträge: 634
Wohnort: Kurhessen
|
Kellerkind_2009 schrieb: Wollte gerade abschalten 😬 Zeige mal
> dpkg -l libsane* | grep ii
jochen@LT-SAM02:~$ dpkg -l libsane* | grep ii
ii libsane-common 1.0.27+git20180630-artful0 all API library for scanners -- documentation and support files
ii libsane1:amd64 1.0.27+git20180630-artful0 amd64 API library for scanners
jochen@LT-SAM02:~$ sudo apt install libsane-dev
jochen@LT-SAM02:~$ sudo apt install libsane-dev
[sudo] Passwort für jochen:
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Einige Pakete konnten nicht installiert werden. Das kann bedeuten, dass
Sie eine unmögliche Situation angefordert haben oder, wenn Sie die
Unstable-Distribution verwenden, dass einige erforderliche Pakete noch
nicht erstellt wurden oder Incoming noch nicht verlassen haben.
Die folgenden Informationen helfen Ihnen vielleicht, die Situation zu lösen:
Die folgenden Pakete haben unerfüllte Abhängigkeiten:
libsane-dev : Hängt ab von: libsane1 (= 1.0.27-1~experimental3ubuntu2.1) aber 1.0.27+git20180630-artful0 soll installiert werden
E: Probleme können nicht korrigiert werden, Sie haben zurückgehaltene defekte Pakete.
jochen@LT-SAM02:~$ lass uns da morgen Nachmittag weiter machen ... ich lege mich jetzt auch ab. Gruß Jochen
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
jochenv schrieb: ... ich lege mich jetzt auch ab.
😬 Morgen dann in aller Frühe starten mit sudo apt purge libsane-common libsane1 dann (wenn keine Fehler) sudo apt install libsane-dev
|