Ich habe eine Festplatte getestet und folgendes Ergebnis erhalten, wer kann mir helfen, das zu verstehen?
Kann man die noch verwenden?
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-55-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org Warning: DEFAULT entry missing in drive database file(s) === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M8 (AF) Device Model: ST1000LM024 HN-M101MBB Serial Number: S2U5J9CCA93714 LU WWN Device Id: 5 0004cf 208b61305 Firmware Version: 2AR10001 User Capacity: 1'000'204'886'016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Aug 7 14:01:13 2019 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 114) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: (13680) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 228) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 881 2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0 3 Spin_Up_Time 0x0023 089 089 025 Pre-fail Always - 3463 4 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 5159 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0 8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 16046 10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 281 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2761 191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 54 192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0 194 Temperature_Celsius 0x0002 063 035 000 Old_age Always - 37 (Min/Max 14/65) 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 1 200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 19007 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 281 225 Load_Cycle_Count 0x0032 098 098 000 Old_age Always - 22442 SMART Error Log Version: 1 ATA Error Count: 32 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 32 occurred at disk power-on lifetime: 13361 hours (556 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 50 99 8c e9 Error: UNC 8 sectors at LBA = 0x098c9950 = 160209232 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 50 99 8c e9 00 00:00:03.215 READ DMA 25 00 20 b0 d2 6e e0 00 00:00:03.215 READ DMA EXT 35 00 08 20 d9 19 e0 00 00:00:03.215 WRITE DMA EXT 25 00 08 c8 b0 70 e0 00 00:00:03.215 READ DMA EXT 27 00 00 00 00 00 e0 00 00:00:03.215 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 31 occurred at disk power-on lifetime: 13361 hours (556 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 50 99 8c e9 Error: UNC 8 sectors at LBA = 0x098c9950 = 160209232 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 50 99 8c e9 00 00:00:03.213 READ DMA 35 00 08 10 d8 99 e0 00 00:00:03.213 WRITE DMA EXT 25 00 88 d0 b0 70 e0 00 00:00:03.213 READ DMA EXT 27 00 00 00 00 00 e0 00 00:00:03.213 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 a0 00 00:00:03.213 IDENTIFY DEVICE Error 30 occurred at disk power-on lifetime: 13361 hours (556 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 50 99 8c e9 Error: UNC 8 sectors at LBA = 0x098c9950 = 160209232 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 50 99 8c e9 00 00:00:03.211 READ DMA 25 00 20 a8 b0 70 e0 00 00:00:03.211 READ DMA EXT 27 00 00 00 00 00 e0 00 00:00:03.211 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 a0 00 00:00:03.211 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:00:03.211 SET FEATURES [Set transfer mode] Error 29 occurred at disk power-on lifetime: 13360 hours (556 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 50 99 8c e9 Error: UNC 8 sectors at LBA = 0x098c9950 = 160209232 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 50 99 8c e9 00 00:00:00.309 READ DMA 35 00 08 28 d8 59 e0 00 00:00:00.309 WRITE DMA EXT 27 00 00 00 00 00 e0 00 00:00:00.309 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 a0 00 00:00:00.309 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:00:00.309 SET FEATURES [Set transfer mode] Error 28 occurred at disk power-on lifetime: 13360 hours (556 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 50 99 8c e9 Error: UNC 8 sectors at LBA = 0x098c9950 = 160209232 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 50 99 8c e9 00 00:00:00.307 READ DMA 27 00 00 00 00 00 e0 00 00:00:00.307 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 a0 00 00:00:00.307 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:00:00.307 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 00:00:00.307 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 20% 16021 1914617296 # 2 Short offline Completed: read failure 90% 13389 207418368 # 3 Extended offline Completed: read failure 90% 13364 207418368 # 4 Short offline Completed: read failure 90% 13364 1876701184 # 5 Extended offline Aborted by host 90% 13364 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed_read_failure [20% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.