naoko
Anmeldungsdatum: 19. Dezember 2014
Beiträge: Zähle...
|
Hallo zusammen,
ich habe mich durch sämtliche Einträge im Forum, die das Thema behandeln durchgelesen, kann mein Problem aber leider nicht lösen: Mir wird angezeigt "Kein Funknetzwerkadapter gefunden", wenn ich versuche übers Wlan online zu gehen. Bis ich gestern ein Update gemacht habe lief alles einwandfrei. Könnt ihr anleiten, um das Problem zu lösen? Danke. | XXX@XXX-ThinkPad-Edge-E545:~$ uname -a
Linux XXX-ThinkPad-Edge-E545 5.3.0-20-generic #21+system76~1572310493~18.04~b3805b2-Ubuntu SMP Tue Oct 29 01:5 x86_64 x86_64 x86_64 GNU/Linux
|
| XXX@XXX-ThinkPad-Edge-E545:~$ lspci -nnk | grep -i net -A2
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 07)
Subsystem: Lenovo RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [17aa:5100]
Kernel driver in use: r8169
Kernel modules: r8169
02:00.0 Network controller [0280]: Broadcom Inc. and subsidiaries BCM43142 802.11b/g/n [14e4:4365] (rev 01)
Subsystem: Lenovo BCM43142 802.11b/g/n [17aa:0611]
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader [10ec:5229] (rev 01)
|
|
praseodym
Supporter
Anmeldungsdatum: 9. Februar 2009
Beiträge: 22096
Wohnort: ~
|
02:00.0 Network controller [0280]: Broadcom Inc. and subsidiaries BCM43142 802.11b/g/n [14e4:4365] (rev 01)
Subsystem: Lenovo BCM43142 802.11b/g/n [17aa:0611]
Da isser, Modul wl wird benötigt, also der Station-Treiber, siehe WLAN/Karten/Broadcom. SecureBoot ist deaktiviert? Zeige
dpkg -l bcmwl-* | grep ii
sudo modprobe -v wl
dmesg | egrep 'wl|key'
|
naoko
(Themenstarter)
Anmeldungsdatum: 19. Dezember 2014
Beiträge: 55
|
Ich weiß nicht ob SecureBoot deaktiviert ist - wie finde ich das heraus? | XXX@XXX-ThinkPad-Edge-E545:~$ dpkg -l bcmwl-* | grep ii
dpkg-query: Kein Paket gefunden, das auf bcmwl-kernel-source_6.30.223.248+bdcom-0ubuntu1_amd64.deb passt
|
| XXX@XXX-ThinkPad-Edge-E545:~$ sudo modprobe -v wl
[sudo] Passwort für XXX:
modprobe: FATAL: Module wl not found in directory /lib/modules/5.3.0-20-generic
|
| XXX@XXX-ThinkPad-Edge-E545:~$ dmesg | egrep 'wl|key'
[ 1.750243] Initialise system trusted keyrings
[ 1.760231] Asymmetric key parser 'x509' registered
[ 1.974712] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.975874] Loaded X.509 cert 'Build time autogenerated kernel key: 135ec30fda5ba2a045d4558ebf810abd679f31d4'
[ 1.984894] Key type big_key registered
|
|
DJKUhpisse
Supporter, Wikiteam
Anmeldungsdatum: 18. Oktober 2016
Beiträge: 17583
Wohnort: in deinem Browser, hier auf dem Bildschirm
|
Zeige sudo apt update
cat /etc/apt/sources.list
Das Paket nennt sich bcmwl-kernel-source und liegt in restricted, falls du diese Quelle deaktiviert hast.
EDIT:
Führe doch einfach mal sudo apt-get install bcmwl-kernel-source aus.
|
naoko
(Themenstarter)
Anmeldungsdatum: 19. Dezember 2014
Beiträge: 55
|
Den letzten Befehl hatte ich schon ausprobiert. 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22 | XXX@XXX-ThinkPad-Edge-E545:~$ sudo apt update
OK:1 http://de.archive.ubuntu.com/ubuntu bionic InRelease
Holen:2 http://de.archive.ubuntu.com/ubuntu bionic-updates InRelease [88,7 kB]
OK:3 http://ppa.launchpad.net/system76/pop/ubuntu bionic InRelease
Holen:4 http://security.ubuntu.com/ubuntu bionic-security InRelease [88,7 kB]
Holen:5 http://de.archive.ubuntu.com/ubuntu bionic-backports InRelease [74,6 kB]
Holen:6 http://de.archive.ubuntu.com/ubuntu bionic-updates/universe Sources [266 kB]
Holen:7 http://de.archive.ubuntu.com/ubuntu bionic-updates/main Sources [295 kB]
Holen:8 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 Packages [768 kB]
Holen:9 http://de.archive.ubuntu.com/ubuntu bionic-updates/main i386 Packages [601 kB]
Holen:10 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 DEP-11 Metadata [295 kB]
Holen:11 http://de.archive.ubuntu.com/ubuntu bionic-updates/main DEP-11 48x48 Icons [73,8 kB]
Holen:12 http://de.archive.ubuntu.com/ubuntu bionic-updates/main DEP-11 64x64 Icons [143 kB]
Holen:13 http://de.archive.ubuntu.com/ubuntu bionic-updates/universe i386 Packages [986 kB]
Holen:14 http://de.archive.ubuntu.com/ubuntu bionic-updates/universe amd64 Packages [1.019 kB]
Holen:15 http://de.archive.ubuntu.com/ubuntu bionic-updates/universe Translation-en [314 kB]
Holen:16 http://de.archive.ubuntu.com/ubuntu bionic-updates/universe amd64 DEP-11 Metadata [254 kB]
Holen:17 http://de.archive.ubuntu.com/ubuntu bionic-updates/universe DEP-11 48x48 Icons [198 kB]
Holen:18 http://de.archive.ubuntu.com/ubuntu bionic-updates/universe DEP-11 64x64 Icons [440 kB]
Holen:19 http://de.archive.ubuntu.com/ubuntu bionic-updates/multiverse amd64 DEP-11 Metadata [2.468 B]
Holen:20 http://de.archive.ubuntu.com/ubuntu bionic-backports/universe amd64 DEP-11 Metadata [7.972 B]
Es wurden 5.913 kB in 6 s geholt (934 kB/s).
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52 | XXX@XXX-ThinkPad-Edge-E545:~$ cat /etc/apt/sources.list
# deb cdrom:[Ubuntu-GNOME 14.04.1 LTS _Trusty Tahr_ - Release amd64 (20140722.2)]/ trusty main multiverse restricted universe
# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
deb http://de.archive.ubuntu.com/ubuntu/ bionic main restricted
deb-src http://de.archive.ubuntu.com/ubuntu/ bionic main restricted
## Major bug fix updates produced after the final release of the
## distribution.
deb http://de.archive.ubuntu.com/ubuntu/ bionic-updates main restricted
deb-src http://de.archive.ubuntu.com/ubuntu/ bionic-updates main restricted
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team. Also, please note that software in universe WILL NOT receive any
## review or updates from the Ubuntu security team.
deb http://de.archive.ubuntu.com/ubuntu/ bionic universe
deb-src http://de.archive.ubuntu.com/ubuntu/ bionic universe
deb http://de.archive.ubuntu.com/ubuntu/ bionic-updates universe
deb-src http://de.archive.ubuntu.com/ubuntu/ bionic-updates universe
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## multiverse WILL NOT receive any review or updates from the Ubuntu
## security team.
deb http://de.archive.ubuntu.com/ubuntu/ bionic multiverse
deb-src http://de.archive.ubuntu.com/ubuntu/ bionic multiverse
deb http://de.archive.ubuntu.com/ubuntu/ bionic-updates multiverse
deb-src http://de.archive.ubuntu.com/ubuntu/ bionic-updates multiverse
## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful features.
## Also, please note that software in backports WILL NOT receive any review
## or updates from the Ubuntu security team.
deb http://de.archive.ubuntu.com/ubuntu/ bionic-backports main restricted universe multiverse
deb-src http://de.archive.ubuntu.com/ubuntu/ bionic-backports main restricted universe multiverse
deb http://security.ubuntu.com/ubuntu bionic-security main restricted
deb-src http://security.ubuntu.com/ubuntu bionic-security main restricted
deb http://security.ubuntu.com/ubuntu bionic-security universe
deb-src http://security.ubuntu.com/ubuntu bionic-security universe
deb http://security.ubuntu.com/ubuntu bionic-security multiverse
deb-src http://security.ubuntu.com/ubuntu bionic-security multiverse
## Uncomment the following two lines to add software from Canonical's
## 'partner' repository.
## This software is not part of Ubuntu, but is offered by Canonical and the
## respective vendors as a service to Ubuntu users.
# deb http://archive.canonical.com/ubuntu trusty partner
# deb-src http://archive.canonical.com/ubuntu trusty partner
|
| XXX@XXX-ThinkPad-Edge-E545:~$ sudo apt-get install bcmwl-kernel-source
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
bcmwl-kernel-source ist schon die neueste Version (6.30.223.271+bdcom-0ubuntu4).
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 3 nicht aktualisiert.
|
|
naoko
(Themenstarter)
Anmeldungsdatum: 19. Dezember 2014
Beiträge: 55
|
Hallo,
hat jemand eine Idee, was ich tun muss, damit das Wlan wieder funktioniert? Danke.
|
elektronenblitz63
Anmeldungsdatum: 16. Januar 2007
Beiträge: 29307
Wohnort: NRW
|
Hallo, wie bereits ober steht - Secure-Boot des BIOS/UEFI abschalten. Treibert ist ja nun installiert. Prüfen:
| sudo apt install mokutil
sudo mokutil --sb-state
dkms status
modinfo wl
sudo modprobe -v wl
iwconfig
|
|
naoko
(Themenstarter)
Anmeldungsdatum: 19. Dezember 2014
Beiträge: 55
|
elektronenblitz63 schrieb: Hallo, wie bereits ober steht - Secure-Boot des BIOS/UEFI abschalten.
Ich weiß nicht wie ich es abschalte. Bei
erschient folgendes: | EFI variables are not supported on this system
|
|
elektronenblitz63
Anmeldungsdatum: 16. Januar 2007
Beiträge: 29307
Wohnort: NRW
|
SB scheint bereits abgeschaltet zu sein. Was ist mit den restlichen Abfragen?
|
naoko
(Themenstarter)
Anmeldungsdatum: 19. Dezember 2014
Beiträge: 55
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15 | XXX@XXX-ThinkPad-Edge-E545:~$ dkms status
bcmwl, 6.30.223.271+bdcom, 4.15.0-66-generic, x86_64: installed
XXX@XXX-ThinkPad-Edge-E545:~$ modinfo wl
modinfo: ERROR: Module wl not found.
XXX@XXX-ThinkPad-Edge-E545:~$ sudo modprobe -v wl
modprobe: FATAL: Module wl not found in directory /lib/modules/5.3.0-20-generic
XXX@XXX-ThinkPad-Edge-E545:~$ iwconfig
eth0 no wireless extensions.
lo no wireless extensions.
|
|
elektronenblitz63
Anmeldungsdatum: 16. Januar 2007
Beiträge: 29307
Wohnort: NRW
|
Der Treiber wurde nur fü den 4.15.0-66-Kernel installiert. Probiere ein ...
| sudo dkms autoinstall
# keine Fehler? →
modinfo wl
sudo modprobe -v wl
iwconfig
|
Ich vermute aber mal, dass der Quellcode aus dem Buntu 18.04 Repos nicht kompatibel mit dem manuell nachinstallierten 5.3x-Kernel ist. Da müsstest Du den aktuellen Quellcode zuerst entfernen und mauell aus den Repos für Buntu 19.10 herunterladen und installieren → http://de.archive.ubuntu.com/ubuntu/pool/restricted/b/bcmwl/bcmwl-kernel-source_6.30.223.271+bdcom-0ubuntu5_amd64.deb ... oder Du verwendest maximal einen 5.0.x-Kernel.
|
naoko
(Themenstarter)
Anmeldungsdatum: 19. Dezember 2014
Beiträge: 55
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48 | XXX@XXX-ThinkPad-Edge-E545:~$ sudo dkms autoinstall
Kernel preparation unnecessary for this kernel. Skipping...
applying patch 0002-Makefile.patch...patching file Makefile
Hunk #1 succeeded at 113 with fuzz 1.
Hunk #2 succeeded at 132 with fuzz 2 (offset 1 line).
applying patch 0003-Make-up-for-missing-init_MUTEX.patch...patching file src/wl/sys/wl_linux.c
Hunk #1 succeeded at 111 with fuzz 2 (offset 12 lines).
applying patch 0010-change-the-network-interface-name-from-eth-to-wlan.patch...patching file src/wl/sys/wl_linux.c
Hunk #1 succeeded at 221 (offset -14 lines).
applying patch 0013-gcc.patch...patching file Makefile
applying patch 0019-broadcom-sta-6.30.223.248-3.18-null-pointer-fix.patch...patching file src/wl/sys/wl_linux.c
Hunk #1 succeeded at 2169 (offset 12 lines).
applying patch 0020-add-support-for-linux-4.3.patch...patching file src/shared/linux_osl.c
applying patch 0021-add-support-for-Linux-4.7.patch...patching file src/wl/sys/wl_cfg80211_hybrid.c
applying patch 0022-add-support-for-Linux-4.8.patch...patching file src/wl/sys/wl_cfg80211_hybrid.c
Hunk #1 succeeded at 2391 (offset 3 lines).
Hunk #2 succeeded at 2501 (offset 3 lines).
Hunk #3 succeeded at 2933 (offset 9 lines).
applying patch 0023-add-support-for-Linux-4.11.patch...patching file src/include/linuxver.h
patching file src/wl/sys/wl_linux.c
Hunk #1 succeeded at 2919 (offset 4 lines).
applying patch 0024-add-support-for-Linux-4.12.patch...patching file src/wl/sys/wl_cfg80211_hybrid.c
Hunk #1 succeeded at 55 (offset 5 lines).
Hunk #2 succeeded at 472 (offset 5 lines).
Hunk #3 succeeded at 2371 (offset 5 lines).
Hunk #4 succeeded at 2388 (offset 5 lines).
applying patch 0025-add-support-for-Linux-4.14.patch...patching file src/shared/linux_osl.c
Hunk #1 succeeded at 1080 (offset 4 lines).
applying patch 0026-add-support-for-Linux-4.15.patch...patching file src/wl/sys/wl_linux.c
Hunk #2 succeeded at 2306 (offset 4 lines).
Hunk #3 succeeded at 2368 (offset 4 lines).
Building module:
cleaning build area...
make -j4 KERNELRELEASE=5.3.0-20-generic -C /lib/modules/5.3.0-20-generic/build M=/var/lib/dkms/bcmwl/6.30.223.271+bdcom/build.......(bad exit status: 2)
|
Soll ich weitermachen mit den weiteren Befehlen?
|
elektronenblitz63
Anmeldungsdatum: 16. Januar 2007
Beiträge: 29307
Wohnort: NRW
|
Wie schon vermutet ist der verwendete Quellcode des Treibermoduls nicht mehr kompatibel mit dem 5.3-Kernel.
make -j4 KERNELRELEASE=5.3.0-20-generic -C /lib/modules/5.3.0-20-generic/build M=/var/lib/dkms/bcmwl/6.30.223.271+bdcom/build.......(bad exit status: 2)
Lösungsmöglichkeit hatte ich ja im obigen Beitrag bereits nachgetragen.
|
naoko
(Themenstarter)
Anmeldungsdatum: 19. Dezember 2014
Beiträge: 55
|
Okay, den Grund weiß ich jetzt, danke! Soll ich die weiteren Befehle dann auch noch ausführen? Ich kenne mich leider nicht genug aus und habe ziemlichen Respekt davor das ohne Anleitung zu machen, weil ich nicht weiß, wie ich es wieder hinkriege, wenn ich was falsch mache. Also die nächsten Schritte sind die restlichen Befehle durchführen?
|
naoko
(Themenstarter)
Anmeldungsdatum: 19. Dezember 2014
Beiträge: 55
|
Soll ich hier weiter machen? | > modinfo wl
> sudo modprobe -v wl
> iwconfig
|
Oder hier: Ich vermute aber mal, dass der Quellcode aus dem Buntu 18.04 Repos nicht kompatibel mit dem manuell nachinstallierten 5.3x-Kernel ist. Da müsstest Du den aktuellen Quellcode zuerst entfernen und mauell aus den Repos für Buntu 19.10 herunterladen und installieren → http://de.archive.ubuntu.com/ubuntu/pool/restricted/b/bcmwl/bcmwl-kernel-source_6.30.223.271+bdcom-0ubuntu5_amd64.deb
Wie entferne ich den aktuellen Quellcode?
... oder Du verwendest maximal einen 5.0.x-Kernel.
|