Guten Tag und hallo!
Gerne würde ich bei meinem Laptop (lenovo X220) mein Grafik Tablett nutzen (Homeoffice). Im Geschäft läuft es unter Windows einwandfrei, hier Zuhause wird es nicht einmal erkannt ☹.
Es ist ein WACOM Intuos pro A4 (PTH 660). Bin computertechnisch wenig versiert und habe diverses ausprobiert. Im Forum hier fand ich vor allem Einträge auf 2010 für Bamboo Tablets.
Die CodeBlöcke wie in der Anleitung sehen so aus:
lspci -nnk | grep -A3 "\[03..\]:"
reto@reto-ThinkPad-X220:~$ lspci -nnk | grep -A3 "\[03..\]:" 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) Subsystem: Lenovo 2nd Generation Core Processor Family Integrated Graphics Controller [17aa:21da] Kernel driver in use: i915 Kernel modules: i915
xrandr --prop
reto@reto-ThinkPad-X220:~$ xrandr --prop Screen 0: minimum 8 x 8, current 3046 x 1050, maximum 32767 x 32767 LVDS1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 277mm x 156mm EDID: 00ffffffffffff0006af6c1000000000 00140104901c10780220e59255549228 25505400000001010101010101010101 010101010101121b5658500019303020 3600159c100000180000000f00000000 00000000000000000020000000fe0041 554f0a202020202020202020000000fe 004231323558573031205630200a00ec BACKLIGHT: 15 range: (0, 15) Backlight: 15 range: (0, 15) scaling mode: Full aspect supported: None, Full, Center, Full aspect 1366x768 60.10*+ 1360x768 59.80 59.96 1280x720 60.00 1024x768 60.00 1024x576 60.00 960x540 60.00 800x600 60.32 56.25 864x486 60.00 640x480 59.94 720x405 60.00 680x384 60.00 640x360 60.00 DP1 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Automatic supported: Automatic, Full, Limited 16:235 audio: auto supported: force-dvi, off, auto, on DP2 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Automatic supported: Automatic, Full, Limited 16:235 audio: auto supported: force-dvi, off, auto, on DP3 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Automatic supported: Automatic, Full, Limited 16:235 audio: auto supported: force-dvi, off, auto, on HDMI1 disconnected (normal left inverted right x axis y axis) aspect ratio: Automatic supported: Automatic, 4:3, 16:9 Broadcast RGB: Automatic supported: Automatic, Full, Limited 16:235 audio: auto supported: force-dvi, off, auto, on HDMI2 disconnected (normal left inverted right x axis y axis) aspect ratio: Automatic supported: Automatic, 4:3, 16:9 Broadcast RGB: Automatic supported: Automatic, Full, Limited 16:235 audio: auto supported: force-dvi, off, auto, on HDMI3 disconnected (normal left inverted right x axis y axis) aspect ratio: Automatic supported: Automatic, 4:3, 16:9 Broadcast RGB: Automatic supported: Automatic, Full, Limited 16:235 audio: auto supported: force-dvi, off, auto, on VGA1 connected 1680x1050+1366+0 (normal left inverted right x axis y axis) 473mm x 296mm EDID: 00ffffffffffff0022f0a82601010101 1f110103682f1e78eeb535a5564a9a25 105054a56b90710081409500a900b300 01010101010121399030621a274068b0 3600d9281100001c000000fd00304c18 5210000a202020202020000000fc0048 502077323230370a20202020000000ff 00435a44373331303059310a20200003 1680x1050 59.95*+ 1600x1000 60.01 1280x1024 75.02 1440x900 59.89 1280x960 60.00 1152x864 75.00 1152x720 59.97 1024x768 75.08 60.00 832x624 74.55 800x600 75.00 60.32 640x480 75.00 60.00 720x400 70.08 VIRTUAL1 disconnected (normal left inverted right x axis y axis)
Der Inhalt dieser Datei so:
[ 34.282] X.Org X Server 1.18.4 Release Date: 2016-07-19 [ 34.282] X Protocol Version 11, Revision 0 [ 34.282] Build Operating System: Linux 4.4.0-128-generic x86_64 Ubuntu [ 34.282] Current Operating System: Linux reto-ThinkPad-X220 4.4.0-176-generic #206-Ubuntu SMP Fri Feb 28 05:02:04 UTC 2020 x86_64 [ 34.282] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-176-generic root=UUID=9225be94-a562-4fca-b855-39065ab63601 ro quiet splash vt.handoff=7 [ 34.282] Build Date: 10 August 2018 09:33:05AM [ 34.282] xorg-server 2:1.18.4-0ubuntu0.8 (For technical support please see http://www.ubuntu.com/support) [ 34.282] Current version of pixman: 0.33.6 [ 34.282] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 34.282] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 34.282] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 26 12:38:23 2020 [ 34.447] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 34.643] (==) No Layout section. Using the first Screen section. [ 34.643] (==) No screen section available. Using defaults. [ 34.643] (**) |-->Screen "Default Screen Section" (0) [ 34.643] (**) | |-->Monitor "<default monitor>" [ 34.737] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 34.737] (==) Automatically adding devices [ 34.737] (==) Automatically enabling devices [ 34.737] (==) Automatically adding GPU devices [ 34.737] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 34.737] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 34.737] Entry deleted from font path. [ 34.737] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 34.737] Entry deleted from font path. [ 34.737] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 34.737] Entry deleted from font path. [ 34.737] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 34.737] Entry deleted from font path. [ 34.737] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 34.737] Entry deleted from font path. [ 34.737] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 34.737] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 34.737] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 34.737] (II) Loader magic: 0x55703a458dc0 [ 34.737] (II) Module ABI versions: [ 34.737] X.Org ANSI C Emulation: 0.4 [ 34.737] X.Org Video Driver: 20.0 [ 34.737] X.Org XInput driver : 22.1 [ 34.737] X.Org Server Extension : 9.0 [ 34.738] (++) using VT number 7 [ 34.738] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 34.739] (II) xfree86: Adding drm device (/dev/dri/card0) [ 34.739] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied [ 34.739] (II) config/udev: Ignoring already known drm device (/dev/dri/card0) [ 34.740] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21da rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64 [ 34.740] (II) LoadModule: "glx" [ 34.917] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 35.923] (II) Module glx: vendor="X.Org Foundation" [ 35.923] compiled for 1.18.4, module version = 1.0.0 [ 35.923] ABI class: X.Org Server Extension, version 9.0 [ 35.923] (==) AIGLX enabled [ 35.923] (==) Matched intel as autoconfigured driver 0 [ 35.923] (==) Matched modesetting as autoconfigured driver 1 [ 35.923] (==) Matched fbdev as autoconfigured driver 2 [ 35.923] (==) Matched vesa as autoconfigured driver 3 [ 35.923] (==) Assigned the driver to the xf86ConfigLayout [ 35.924] (II) LoadModule: "intel" [ 36.017] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 36.311] (II) Module intel: vendor="X.Org Foundation" [ 36.311] compiled for 1.18.4, module version = 2.99.917 [ 36.311] Module class: X.Org Video Driver [ 36.311] ABI class: X.Org Video Driver, version 20.0 [ 36.311] (II) LoadModule: "modesetting" [ 36.311] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 36.368] (II) Module modesetting: vendor="X.Org Foundation" [ 36.368] compiled for 1.18.4, module version = 1.18.4 [ 36.368] Module class: X.Org Video Driver [ 36.368] ABI class: X.Org Video Driver, version 20.0 [ 36.368] (II) LoadModule: "fbdev" [ 36.368] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 36.413] (II) Module fbdev: vendor="X.Org Foundation" [ 36.413] compiled for 1.18.1, module version = 0.4.4 [ 36.413] Module class: X.Org Video Driver [ 36.413] ABI class: X.Org Video Driver, version 20.0 [ 36.413] (II) LoadModule: "vesa" [ 36.413] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 36.443] (II) Module vesa: vendor="X.Org Foundation" [ 36.443] compiled for 1.18.1, module version = 2.3.4 [ 36.443] Module class: X.Org Video Driver [ 36.443] ABI class: X.Org Video Driver, version 20.0 [ 36.443] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 36.443] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000 [ 36.443] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100 [ 36.443] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300 [ 36.443] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 36.443] (II) FBDEV: driver for framebuffer: fbdev [ 36.443] (II) VESA: driver for VESA chipsets: vesa [ 37.117] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20151010 [ 37.117] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1.2 (Timo Aaltonen <tjaalton@debian.org>) [ 37.117] (II) intel(0): SNA compiled for use with valgrind [ 37.119] (WW) Falling back to old probe method for modesetting [ 37.119] (WW) Falling back to old probe method for fbdev [ 37.119] (II) Loading sub module "fbdevhw" [ 37.119] (II) LoadModule: "fbdevhw" [ 37.119] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 37.154] (II) Module fbdevhw: vendor="X.Org Foundation" [ 37.154] compiled for 1.18.4, module version = 0.0.2 [ 37.154] ABI class: X.Org Video Driver, version 20.0 [ 37.154] (WW) Falling back to old probe method for vesa [ 37.172] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000 [ 37.172] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 2 threads [ 37.172] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 37.172] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 37.172] (==) intel(0): RGB weight 888 [ 37.172] (==) intel(0): Default visual is TrueColor [ 37.172] (II) intel(0): Output LVDS1 has no monitor section [ 37.184] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1 [ 37.184] (II) intel(0): Enabled output LVDS1 [ 37.184] (II) intel(0): Output VGA1 has no monitor section [ 37.184] (II) intel(0): Enabled output VGA1 [ 37.184] (II) intel(0): Output HDMI1 has no monitor section [ 37.184] (II) intel(0): Enabled output HDMI1 [ 37.184] (II) intel(0): Output DP1 has no monitor section [ 37.184] (II) intel(0): Enabled output DP1 [ 37.184] (II) intel(0): Output HDMI2 has no monitor section [ 37.184] (II) intel(0): Enabled output HDMI2 [ 37.184] (II) intel(0): Output HDMI3 has no monitor section [ 37.184] (II) intel(0): Enabled output HDMI3 [ 37.184] (II) intel(0): Output DP2 has no monitor section [ 37.184] (II) intel(0): Enabled output DP2 [ 37.184] (II) intel(0): Output DP3 has no monitor section [ 37.184] (II) intel(0): Enabled output DP3 [ 37.184] (--) intel(0): Using a maximum size of 256x256 for hardware cursors [ 37.184] (II) intel(0): Output VIRTUAL1 has no monitor section [ 37.184] (II) intel(0): Enabled output VIRTUAL1 [ 37.184] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0 [ 37.184] (--) intel(0): Output VGA1 using initial mode 1680x1050 on pipe 1 [ 37.184] (==) intel(0): TearFree disabled [ 37.184] (==) intel(0): DPI set to (96, 96) [ 37.184] (II) Loading sub module "dri2" [ 37.184] (II) LoadModule: "dri2" [ 37.184] (II) Module "dri2" already built-in [ 37.184] (II) Loading sub module "present" [ 37.184] (II) LoadModule: "present" [ 37.184] (II) Module "present" already built-in [ 37.185] (II) UnloadModule: "modesetting" [ 37.185] (II) Unloading modesetting [ 37.185] (II) UnloadModule: "fbdev" [ 37.185] (II) Unloading fbdev [ 37.185] (II) UnloadSubModule: "fbdevhw" [ 37.185] (II) Unloading fbdevhw [ 37.185] (II) UnloadModule: "vesa" [ 37.185] (II) Unloading vesa [ 37.185] (==) Depth 24 pixmap format is 32 bpp [ 37.314] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend [ 37.314] (==) intel(0): Backing store enabled [ 37.314] (==) intel(0): Silken mouse enabled [ 37.315] (II) intel(0): HW Cursor enabled [ 37.315] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 37.316] (==) intel(0): DPMS enabled [ 37.316] (==) intel(0): Display hotplug detection enabled [ 37.316] (II) intel(0): [DRI2] Setup complete [ 37.316] (II) intel(0): [DRI2] DRI driver: i965 [ 37.316] (II) intel(0): [DRI2] VDPAU driver: va_gl [ 37.316] (II) intel(0): direct rendering: DRI2 enabled [ 37.316] (II) intel(0): hardware support for Present enabled [ 37.316] (--) RandR disabled [ 37.345] (II) SELinux: Disabled on system [ 37.643] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 37.643] (II) AIGLX: enabled GLX_ARB_create_context [ 37.643] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 37.643] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile [ 37.643] (II) AIGLX: enabled GLX_INTEL_swap_event [ 37.643] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 37.643] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 37.643] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 37.643] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float [ 37.643] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 37.643] (II) AIGLX: enabled GLX_ARB_create_context_robustness [ 37.643] (II) AIGLX: Loaded and initialized i965 [ 37.643] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 37.661] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none [ 37.661] (II) intel(0): switch to mode 1680x1050@60.0 on VGA1 using pipe 1, position (0, 0), rotation normal, reflection none [ 37.661] (II) intel(0): Setting screen physical size to 444 x 277 [ 38.496] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 38.496] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 38.496] (II) LoadModule: "evdev" [ 38.496] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 38.670] (II) Module evdev: vendor="X.Org Foundation" [ 38.670] compiled for 1.18.1, module version = 2.10.1 [ 38.670] Module class: X.Org XInput Driver [ 38.670] ABI class: X.Org XInput driver, version 22.1 [ 38.670] (II) Using input driver 'evdev' for 'Power Button' [ 38.671] (**) Power Button: always reports core events [ 38.671] (**) evdev: Power Button: Device: "/dev/input/event2" [ 38.671] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 38.671] (--) evdev: Power Button: Found keys [ 38.671] (II) evdev: Power Button: Configuring as keyboard [ 38.671] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 38.671] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 38.671] (**) Option "xkb_rules" "evdev" [ 38.671] (**) Option "xkb_model" "pc105" [ 38.671] (**) Option "xkb_layout" "ch" [ 38.854] (II) config/udev: Adding input device Video Bus (/dev/input/event4) [ 38.854] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 38.854] (II) Using input driver 'evdev' for 'Video Bus' [ 38.854] (**) Video Bus: always reports core events [ 38.854] (**) evdev: Video Bus: Device: "/dev/input/event4" [ 38.854] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 38.854] (--) evdev: Video Bus: Found keys [ 38.854] (II) evdev: Video Bus: Configuring as keyboard [ 38.854] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event4" [ 38.854] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 38.854] (**) Option "xkb_rules" "evdev" [ 38.854] (**) Option "xkb_model" "pc105" [ 38.854] (**) Option "xkb_layout" "ch" [ 38.854] (II) config/udev: Adding input device Lid Switch (/dev/input/event0) [ 38.854] (II) No input driver specified, ignoring this device. [ 38.854] (II) This device may have been added with another device file. [ 38.855] (II) config/udev: Adding input device Sleep Button (/dev/input/event1) [ 38.855] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 38.855] (II) Using input driver 'evdev' for 'Sleep Button' [ 38.855] (**) Sleep Button: always reports core events [ 38.855] (**) evdev: Sleep Button: Device: "/dev/input/event1" [ 38.855] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 38.855] (--) evdev: Sleep Button: Found keys [ 38.855] (II) evdev: Sleep Button: Configuring as keyboard [ 38.855] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1" [ 38.855] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8) [ 38.855] (**) Option "xkb_rules" "evdev" [ 38.855] (**) Option "xkb_model" "pc105" [ 38.855] (**) Option "xkb_layout" "ch" [ 38.855] (II) config/udev: Adding drm device (/dev/dri/card0) [ 38.855] (II) xfree86: Adding drm device (/dev/dri/card0) [ 38.855] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied [ 38.855] (II) config/udev: Ignoring already known drm device (/dev/dri/card0) [ 38.856] (II) config/udev: Adding input device PixArt HP USB Optical Mouse (/dev/input/event7) [ 38.856] (**) PixArt HP USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 38.856] (II) Using input driver 'evdev' for 'PixArt HP USB Optical Mouse' [ 38.856] (**) PixArt HP USB Optical Mouse: always reports core events [ 38.856] (**) evdev: PixArt HP USB Optical Mouse: Device: "/dev/input/event7" [ 38.912] (--) evdev: PixArt HP USB Optical Mouse: Vendor 0x3f0 Product 0x94a [ 38.912] (--) evdev: PixArt HP USB Optical Mouse: Found 12 mouse buttons [ 38.912] (--) evdev: PixArt HP USB Optical Mouse: Found scroll wheel(s) [ 38.912] (--) evdev: PixArt HP USB Optical Mouse: Found relative axes [ 38.912] (--) evdev: PixArt HP USB Optical Mouse: Found x and y relative axes [ 38.912] (II) evdev: PixArt HP USB Optical Mouse: Configuring as mouse [ 38.912] (II) evdev: PixArt HP USB Optical Mouse: Adding scrollwheel support [ 38.912] (**) evdev: PixArt HP USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 38.912] (**) evdev: PixArt HP USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 38.912] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/0003:03F0:094A.0003/input/input14/event7" [ 38.912] (II) XINPUT: Adding extended input device "PixArt HP USB Optical Mouse" (type: MOUSE, id 9) [ 38.912] (II) evdev: PixArt HP USB Optical Mouse: initialized for relative axes. [ 38.912] (**) PixArt HP USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 38.912] (**) PixArt HP USB Optical Mouse: (accel) acceleration profile 0 [ 38.912] (**) PixArt HP USB Optical Mouse: (accel) acceleration factor: 2.000 [ 38.912] (**) PixArt HP USB Optical Mouse: (accel) acceleration threshold: 4 [ 38.913] (II) config/udev: Adding input device PixArt HP USB Optical Mouse (/dev/input/mouse1) [ 38.913] (II) No input driver specified, ignoring this device. [ 38.913] (II) This device may have been added with another device file. [ 38.913] (II) config/udev: Adding input device Wacom Co.,Ltd. Wacom Intuos Pro M Pen (/dev/input/event8) [ 38.913] (**) Wacom Co.,Ltd. Wacom Intuos Pro M Pen: Applying InputClass "Wacom USB device class" [ 38.913] (**) Wacom Co.,Ltd. Wacom Intuos Pro M Pen: Applying InputClass "Wacom class" [ 38.913] (II) LoadModule: "wacom" [ 38.913] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so [ 38.967] (II) Module wacom: vendor="X.Org Foundation" [ 38.967] compiled for 1.18.1, module version = 0.32.0 [ 38.967] Module class: X.Org XInput Driver [ 38.967] ABI class: X.Org XInput driver, version 22.1 [ 38.967] (II) wacom: Driver for Wacom graphics tablets: PenPartner, Graphire, Graphire2 4x5, Graphire2 5x7, Graphire3 4x5, Graphire3 6x8, Graphire4 4x5, Graphire4 6x8, BambooFun 4x5, BambooFun 6x8, Bamboo1 Medium, Graphire4 6x8 BlueTooth, CTL-460, CTH-461, CTL-660, CTL-461/S, Bamboo Touch, CTH-460/K, CTH-461/S, CTH-661/S1, CTH-461/L, CTH-661/L, Intuos 4x5, Intuos 6x8, Intuos 9x12, Intuos 12x12, Intuos 12x18, PTU600, PL400, PL500, PL600, PL600SX, PL550, PL800, PL700, PL510, PL710, DTI520, DTF720, DTF720a, DTF521, DTU1931, DTU2231, DTU1631, Intuos2 4x5, Intuos2 6x8, Intuos2 9x12, Intuos2 12x12, Intuos2 12x18, Intuos2 6x8 , Volito, PenStation, Volito2 4x5, Volito2 2x3, PenPartner2, Bamboo, Bamboo1, Bamboo1 4x6, Bamboo1 5x8, Intuos3 4x5, Intuos3 6x8, Intuos3 9x12, Intuos3 12x12, Intuos3 12x19, Intuos3 6x11, Intuos3 4x6, Intuos4 4x6, Intuos4 6x9, Intuos4 8x13, Intuos4 12x19, Intuos4 WL USB Endpoint, Intuos4 WL Bluetooth Endpoint, Intuos5 touch S, Intuos5 touch M, Intuos5 touch L, Intuos5 S, Intuos5 M, Intuos Pro S, Intuos Pro M, Intuos Pro L, Cintiq 21UX, Cintiq 20WSX, Cintiq 12WX, Cintiq 21UX2, Cintiq 24HD, Cintiq 22HD, Cintiq 24HD touch (EMR digitizer), Cintiq 13HD, DTK2241, DTH2242, Cintiq 22HDT, TabletPC 0x90, TabletPC 0x93, TabletPC 0x97, TabletPC 0x9A, CapPlus 0x9F, TabletPC 0xE2, TabletPC 0xE3, TabletPC 0xE5, TabletPC 0xE6, TabletPC 0xEC, TabletPC 0xED, TabletPC 0xEF, TabletPC 0x100, TabletPC 0x101, TabletPC 0x10D, TabletPC 0x116, TabletPC 0x12C, TabletPC 0x4001, TabletPC 0x4004, TabletPC 0x5000, TabletPC 0x5002, usb:172f:0024, usb:172f:0025, usb:172f:0026, usb:172f:0027, usb:172f:0028, usb:172f:0030, usb:172f:0031, usb:172f:0032, usb:172f:0033, usb:172f:0034, usb:172f:0035, usb:172f:0036, usb:172f:0037, usb:172f:0038, usb:172f:0039, usb:172f:0051, usb:172f:0052, usb:172f:0053, usb:172f:0054, usb:172f:0055, usb:172f:0056, usb:172f:0057, usb:172f:0058, usb:172f:0500, usb:172f:0501, usb:172f:0502, usb:172f:0503, usb:1b96:0001, usb:17ef:6004 [ 38.968] (II) Using input driver 'wacom' for 'Wacom Co.,Ltd. Wacom Intuos Pro M Pen' [ 38.968] (**) Wacom Co.,Ltd. Wacom Intuos Pro M Pen: always reports core events [ 38.968] (**) Option "Device" "/dev/input/event8" [ 39.024] (EE) Wacom Co.,Ltd. Wacom Intuos Pro M Pen: Invalid type 'stylus' for this device. [ 39.044] (EE) Wacom Co.,Ltd. Wacom Intuos Pro M Pen: Invalid type 'eraser' for this device. [ 39.044] (EE) Wacom Co.,Ltd. Wacom Intuos Pro M Pen: Invalid type 'cursor' for this device. [ 39.044] (EE) Wacom Co.,Ltd. Wacom Intuos Pro M Pen: Invalid type 'touch' for this device. [ 39.044] (EE) Wacom Co.,Ltd. Wacom Intuos Pro M Pen: Invalid type 'pad' for this device. [ 39.044] (EE) Wacom Co.,Ltd. Wacom Intuos Pro M Pen: No type specified [ 39.068] (EE) PreInit returned 8 for "Wacom Co.,Ltd. Wacom Intuos Pro M Pen" [ 39.068] (II) UnloadModule: "wacom" [ 39.068] (II) config/udev: Adding input device Integrated Camera (/dev/input/event17) [ 39.068] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall" [ 39.068] (II) Using input driver 'evdev' for 'Integrated Camera' [ 39.068] (**) Integrated Camera: always reports core events [ 39.068] (**) evdev: Integrated Camera: Device: "/dev/input/event17" [ 39.068] (--) evdev: Integrated Camera: Vendor 0x4f2 Product 0xb217 [ 39.068] (--) evdev: Integrated Camera: Found keys [ 39.068] (II) evdev: Integrated Camera: Configuring as keyboard [ 39.068] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input29/event17" [ 39.068] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 10) [ 39.068] (**) Option "xkb_rules" "evdev" [ 39.068] (**) Option "xkb_model" "pc105" [ 39.068] (**) Option "xkb_layout" "ch" [ 39.069] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10) [ 39.069] (II) No input driver specified, ignoring this device. [ 39.069] (II) This device may have been added with another device file. [ 39.069] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event11) [ 39.069] (II) No input driver specified, ignoring this device. [ 39.069] (II) This device may have been added with another device file. [ 39.069] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event12) [ 39.069] (II) No input driver specified, ignoring this device. [ 39.069] (II) This device may have been added with another device file. [ 39.070] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13) [ 39.070] (II) No input driver specified, ignoring this device. [ 39.070] (II) This device may have been added with another device file. [ 39.070] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14) [ 39.070] (II) No input driver specified, ignoring this device. [ 39.070] (II) This device may have been added with another device file. [ 39.070] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event15) [ 39.070] (II) No input driver specified, ignoring this device. [ 39.070] (II) This device may have been added with another device file. [ 39.070] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event16) [ 39.070] (II) No input driver specified, ignoring this device. [ 39.070] (II) This device may have been added with another device file. [ 39.071] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) [ 39.071] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 39.071] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 39.071] (**) AT Translated Set 2 keyboard: always reports core events [ 39.071] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3" [ 39.071] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 39.071] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 39.071] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 39.071] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3" [ 39.071] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11) [ 39.071] (**) Option "xkb_rules" "evdev" [ 39.071] (**) Option "xkb_model" "pc105" [ 39.071] (**) Option "xkb_layout" "ch" [ 39.071] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6) [ 39.071] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 39.071] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchscreen catchall" [ 39.071] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 39.071] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons" [ 39.071] (II) LoadModule: "synaptics" [ 39.071] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 39.144] (II) Module synaptics: vendor="X.Org Foundation" [ 39.144] compiled for 1.18.1, module version = 1.8.2 [ 39.144] Module class: X.Org XInput Driver [ 39.144] ABI class: X.Org XInput driver, version 22.1 [ 39.144] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 39.144] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 39.144] (**) Option "Device" "/dev/input/event6" [ 39.200] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property [ 39.200] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 75) [ 39.200] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 129) [ 39.200] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 39.200] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15 [ 39.200] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple [ 39.200] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 39.200] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0" [ 39.200] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 39.200] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 39.224] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event6" [ 39.224] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12) [ 39.224] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 [ 39.224] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75 [ 39.224] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040 [ 39.224] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 39.224] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 39.224] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 39.224] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 39.224] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 39.224] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0) [ 39.224] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates" [ 39.225] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event5) [ 39.225] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall" [ 39.225] (**) TPPS/2 IBM TrackPoint: Applying InputClass "trackpoint catchall" [ 39.225] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint' [ 39.225] (**) TPPS/2 IBM TrackPoint: always reports core events [ 39.225] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event5" [ 39.225] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa [ 39.225] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons [ 39.225] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes [ 39.225] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes [ 39.225] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse [ 39.225] (**) Option "Emulate3Buttons" "true" [ 39.225] (**) Option "EmulateWheel" "true" [ 39.225] (**) Option "EmulateWheelButton" "2" [ 39.225] (**) Option "YAxisMapping" "4 5" [ 39.225] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5 [ 39.225] (**) Option "XAxisMapping" "6 7" [ 39.225] (**) evdev: TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7 [ 39.225] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 39.225] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input13/event5" [ 39.225] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 13) [ 39.225] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes. [ 39.225] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1 [ 39.225] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0 [ 39.225] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000 [ 39.225] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4 [ 39.225] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse2) [ 39.225] (II) No input driver specified, ignoring this device. [ 39.225] (II) This device may have been added with another device file. [ 39.227] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event9) [ 39.227] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall" [ 39.227] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons' [ 39.227] (**) ThinkPad Extra Buttons: always reports core events [ 39.227] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event9" [ 39.227] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054 [ 39.227] (--) evdev: ThinkPad Extra Buttons: Found keys [ 39.227] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard [ 39.227] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input21/event9" [ 39.227] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 14) [ 39.227] (**) Option "xkb_rules" "evdev" [ 39.227] (**) Option "xkb_model" "pc105" [ 39.227] (**) Option "xkb_layout" "ch" [ 39.269] (II) intel(0): EDID vendor "AUO", prod id 4204 [ 39.269] (II) intel(0): Printing DDC gathered Modelines: [ 39.269] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1454 768 771 777 793 -hsync -vsync (47.7 kHz eP) [ 52.250] (II) intel(0): resizing framebuffer to 3046x1050 [ 52.283] (II) intel(0): switch to mode 1680x1050@60.0 on VGA1 using pipe 1, position (1366, 0), rotation normal, reflection none [ 63.599] (II) intel(0): resizing framebuffer to 1024x768 [ 63.600] (II) intel(0): switch to mode 1024x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none [ 64.110] (II) intel(0): switch to mode 1024x768@75.1 on VGA1 using pipe 1, position (0, 0), rotation normal, reflection none [ 64.248] (II) intel(0): switch to mode 1024x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none [ 64.705] (II) intel(0): switch to mode 1024x768@75.1 on VGA1 using pipe 1, position (0, 0), rotation normal, reflection none [ 88.708] (II) intel(0): resizing framebuffer to 3046x1050 [ 88.737] (II) intel(0): switch to mode 1680x1050@60.0 on VGA1 using pipe 0, position (1366, 0), rotation normal, reflection none [ 89.024] (II) intel(0): switch to mode 1366x768@60.1 on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none [ 147.107] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 1889.413] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
Bin froh um Unterstützung, denn so kann ich in Video-Konferenzen zeichnen. Mit der Maus ist das ein Graus...
Danke und Gruss!