Danke für die raschen Antworten, anbei die Infos für Disngsbums
hanspeter@hanspeter-HP-Pavilion-g6-Notebook-PC:~$ uname -a
Linux hanspeter-HP-Pavilion-g6-Notebook-PC 4.15.0-91-generic #92-Ubuntu SMP Fri Feb 28 11:10:06 UTC 2020 i686 i686 i686 GNU/Linux
hanspeter@hanspeter-HP-Pavilion-g6-Notebook-PC:~$ cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-4.15.0-91-generic root=UUID=b00403c2-c32b-4227-b02e-455185a51c1b ro quiet splash vt.handoff=1
hanspeter@hanspeter-HP-Pavilion-g6-Notebook-PC:~$ dmesg
[ 0.000000] Linux version 4.15.0-91-generic (buildd@lcy01-amd64-017) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #92-Ubuntu SMP Fri Feb 28 11:10:06 UTC 2020 (Ubuntu 4.15.0-91.92-generic 4.15.18)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x000000009a6befff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009a6bf000-0x000000009aebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP Pavilion g6 Notebook PC/183E, BIOS F.25 05/29/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x25f600 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FE0000000 write-back
[ 0.000000] 2 base 09B000000 mask FFF000000 uncachable
[ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 5 base 100000000 mask F00000000 write-back
[ 0.000000] 6 base 200000000 mask F80000000 write-back
[ 0.000000] 7 base 25F600000 mask FFFE00000 uncachable
[ 0.000000] 8 base 25F800000 mask FFF800000 uncachable
[ 0.000000] 9 base 260000000 mask FE0000000 uncachable
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1c3fffff]
[ 0.000000] BRK [0x1bfeb000, 0x1bfebfff] PGTABLE
[ 0.000000] BRK [0x1bfec000, 0x1bfecfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x33ae1000-0x35d67fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 0x000000009AFFE210 0000A4 (v01 HPQOEM SLIC-MPC 00000001 HP 01000013)
[ 0.000000] ACPI: FACP 0x000000009AFFB000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: DSDT 0x000000009AFE9000 00E963 (v01 HPQOEM INSYDE 00000000 INTL 00040000)
[ 0.000000] ACPI: FACS 0x000000009AFBA000 000040
[ 0.000000] ACPI: UEFI 0x000000009AFFD000 000236 (v01 HPQOEM 183E 00000001 HP 00040000)
[ 0.000000] ACPI: ASF! 0x000000009AFFC000 0000A5 (v32 HPQOEM 183E 00000001 HP 00040000)
[ 0.000000] ACPI: HPET 0x000000009AFFA000 000038 (v01 HPQOEM 183E 00000001 HP 00040000)
[ 0.000000] ACPI: APIC 0x000000009AFF9000 00008C (v03 HPQOEM 183E 00000001 HP 00040000)
[ 0.000000] ACPI: MCFG 0x000000009AFF8000 00003C (v01 HPQOEM 183E 00000001 HP 00040000)
[ 0.000000] ACPI: WDAT 0x000000009AFE8000 000224 (v01 HPQOEM 183E 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 0x000000009AFE7000 000E21 (v01 HPQOEM INSYDE 00001000 INTL 00040000)
[ 0.000000] ACPI: BOOT 0x000000009AFE5000 000028 (v01 HPQOEM 183E 00000001 HP 00040000)
[ 0.000000] ACPI: ASPT 0x000000009AFE3000 000034 (v07 HPQOEM 183E 00000001 HP 00040000)
[ 0.000000] ACPI: DBGP 0x000000009AFE2000 000034 (v01 HPQOEM 183E 00000001 HP 00040000)
[ 0.000000] ACPI: FPDT 0x000000009AFE0000 000044 (v01 HPQOEM 183E 00000001 HP 00040000)
[ 0.000000] ACPI: MSDM 0x000000009AFDF000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 0x000000009AFDE000 0009AA (v01 HPQOEM INSYDE 00003000 INTL 00040000)
[ 0.000000] ACPI: SSDT 0x000000009AFDD000 000B22 (v01 HPQOEM INSYDE 00003000 INTL 00040000)
[ 0.000000] ACPI: SSDT 0x000000009AFDA000 001EED (v01 HPQOEM INSYDE 00001000 INTL 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 8832MB HIGHMEM available.
[ 0.000000] 885MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 375fe000
[ 0.000000] low ram: 0 - 375fe000
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] BRK [0x1bfed000, 0x1bfedfff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000375fdfff]
[ 0.000000] HighMem [mem 0x00000000375fe000-0x000000025f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x0000000040003fff]
[ 0.000000] node 0: [mem 0x0000000040005000-0x000000009a6befff]
[ 0.000000] node 0: [mem 0x000000009afff000-0x000000009affffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000025f5fffff]
[ 0.000000] Reserved but unavailable: 100 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025f5fffff]
[ 0.000000] On node 0 totalpages: 2071131
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] Normal zone: 2175 pages used for memmap
[ 0.000000] Normal zone: 222206 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1844929 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Reserving Intel graphics memory at 0x000000009ba00000-0x000000009f9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9a6bf000-0x9aebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x81/0x433 with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 29 pages/cpu s89036 r0 d29748 u118784
[ 0.000000] pcpu-alloc: s89036 r0 d29748 u118784 alloc=29*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2068916
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-91-generic root=UUID=b00403c2-c32b-4227-b02e-455185a51c1b ro quiet splash vt.handoff=1
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] microcode: microcode updated early to revision 0x21, date = 2019-02-13
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000375fe:0025f600)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 8083188K/8284524K available (8957K kernel code, 894K rwdata, 3444K rodata, 1104K init, 848K bss, 201336K reserved, 0K cma-reserved, 7379716K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
cpu_entry : 0xffa00000 - 0xffb39000 (1252 kB)
pkmap : 0xff600000 - 0xff800000 (2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xdbd17000 - 0xdbe2b000 (1104 kB)
.data : 0xdb8bf670 - 0xdbd03b80 (4369 kB)
.text : 0xdb000000 - 0xdb8bf670 (8957 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ************************************************************
[ 0.000000] ** WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! **
[ 0.000000] ** **
[ 0.000000] ** You are using 32-bit PTI on a 64-bit PCID-capable CPU. **
[ 0.000000] ** Your performance will increase dramatically if you **
[ 0.000000] ** switch to a 64-bit kernel! **
[ 0.000000] ** **
[ 0.000000] ** WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! **
[ 0.000000] ************************************************************
[ 0.000000] ftrace: allocating 38045 entries in 75 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] NR_IRQS: 2304, nr_irqs: 488, preallocated irqs: 16
[ 0.000000] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
[ 0.000000] vt handoff: transparent VT on vt#1
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.020000] tsc: Fast TSC calibration using PIT
[ 0.024000] tsc: Detected 2593.940 MHz processor
[ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.88 BogoMIPS (lpj=10375760)
[ 0.024000] pid_max: default: 32768 minimum: 301
[ 0.024000] Security Framework initialized
[ 0.024000] Yama: becoming mindful.
[ 0.024000] AppArmor: AppArmor initialized
[ 0.024000] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.024000] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.024000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.024000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.024000] CPU0: Thermal monitoring enabled (TM1)
[ 0.024000] process: using mwait in idle threads
[ 0.024000] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.024000] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.024000] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.024000] Spectre V2 : Mitigation: Full generic retpoline
[ 0.024000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.024000] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.024000] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.024000] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.024000] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.024000] MDS: Mitigation: Clear CPU buffers
[ 0.024000] Freeing SMP alternatives memory: 36K
[ 0.032052] TSC deadline timer enabled
[ 0.032056] smpboot: CPU0: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.032118] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.032137] ... version: 3
[ 0.032138] ... bit width: 48
[ 0.032138] ... generic registers: 4
[ 0.032139] ... value mask: 0000ffffffffffff
[ 0.032140] ... max period: 00007fffffffffff
[ 0.032140] ... fixed-purpose events: 3
[ 0.032141] ... event mask: 000000070000000f
[ 0.032174] Hierarchical SRCU implementation.
[ 0.033194] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.033212] smp: Bringing up secondary CPUs ...
[ 0.033293] CPU 1 irqstacks, hard=(ptrval) soft=(ptrval)
[ 0.033294] x86: Booting SMP configuration:
[ 0.033294] .... node #0, CPUs: #1
[ 0.004000] Initializing CPU#1
[ 0.036118] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.036201] CPU 2 irqstacks, hard=(ptrval) soft=(ptrval)
[ 0.036202] #2
[ 0.004000] Initializing CPU#2
[ 0.039632] CPU 3 irqstacks, hard=(ptrval) soft=(ptrval)
[ 0.039632] #3
[ 0.004000] Initializing CPU#3
[ 0.042165] smp: Brought up 1 node, 4 CPUs
[ 0.042165] smpboot: Max logical packages: 2
[ 0.042165] smpboot: Total of 4 processors activated (20751.52 BogoMIPS)
[ 0.044706] allocated 8388608 bytes of page_ext
[ 0.044751] devtmpfs: initialized
[ 0.044751] evm: security.selinux
[ 0.044751] evm: security.SMACK64
[ 0.044751] evm: security.SMACK64EXEC
[ 0.044751] evm: security.SMACK64TRANSMUTE
[ 0.044751] evm: security.SMACK64MMAP
[ 0.044751] evm: security.apparmor
[ 0.044751] evm: security.ima
[ 0.044751] evm: security.capability
[ 0.044751] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
[ 0.044751] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.044751] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.044751] pinctrl core: initialized pinctrl subsystem
[ 0.044751] RTC time: 18:01:28, date: 04/04/20
[ 0.044751] NET: Registered protocol family 16
[ 0.044751] audit: initializing netlink subsys (disabled)
[ 0.044751] audit: type=2000 audit(1586023288.044:1): state=initialized audit_enabled=0 res=1
[ 0.044751] EISA bus registered
[ 0.044751] cpuidle: using governor ladder
[ 0.044751] cpuidle: using governor menu
[ 0.044751] Simple Boot Flag at 0x44 set to 0x1
[ 0.044751] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.044751] ACPI: bus type PCI registered
[ 0.044751] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.044751] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.044751] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.044751] PCI: Using MMCONFIG for extended config space
[ 0.044751] PCI: Using configuration type 1 for base access
[ 0.044751] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.045170] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.045170] ACPI: Added _OSI(Module Device)
[ 0.045170] ACPI: Added _OSI(Processor Device)
[ 0.045170] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.045170] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.045170] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.045170] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.045170] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.045170] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.049407] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.049407] ACPI: Dynamic OEM Table Load:
[ 0.049407] ACPI: SSDT 0x00000000EBB05000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20120816)
[ 0.049409] ACPI: Dynamic OEM Table Load:
[ 0.049409] ACPI: SSDT 0x00000000EA874800 000303 (v01 PmRef ApIst 00003000 INTL 20120816)
[ 0.049409] ACPI: Dynamic OEM Table Load:
[ 0.049409] ACPI: SSDT 0x00000000EA81D000 000119 (v01 PmRef ApCst 00003000 INTL 20120816)
[ 0.052008] ACPI: EC: EC started
[ 0.052009] ACPI: EC: interrupt blocked
[ 0.212654] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.212656] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1d, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.212657] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 0.212658] ACPI: Interpreter enabled
[ 0.212688] ACPI: (supports S0 S3 S4 S5)
[ 0.212689] ACPI: Using IOAPIC for interrupt routing
[ 0.212717] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.212901] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM
[ 0.212933] ACPI: Enabled 7 GPEs in block 00 to 3F
[ 0.218554] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.218558] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.218618] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.218961] PCI host bridge to bus 0000:00
[ 0.218963] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.218964] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.218965] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.218966] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
[ 0.218968] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.218976] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.219050] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.219085] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.219148] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.219158] pci 0000:00:02.0: reg 0x10: [mem 0xc3000000-0xc33fffff 64bit]
[ 0.219163] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.219167] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
[ 0.219265] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.219289] pci 0000:00:14.0: reg 0x10: [mem 0xc3600000-0xc360ffff 64bit]
[ 0.219359] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.219417] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.219443] pci 0000:00:16.0: reg 0x10: [mem 0xc3614000-0xc361400f 64bit]
[ 0.219516] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.219582] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.219603] pci 0000:00:1a.0: reg 0x10: [mem 0xc3619000-0xc36193ff]
[ 0.219687] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.219747] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.219769] pci 0000:00:1b.0: reg 0x10: [mem 0xc3610000-0xc3613fff 64bit]
[ 0.219842] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.219907] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.219992] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.220059] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.220144] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.220208] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.220292] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.220361] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.220383] pci 0000:00:1d.0: reg 0x10: [mem 0xc3618000-0xc36183ff]
[ 0.220467] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.220525] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ 0.220682] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.220701] pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f]
[ 0.220709] pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097]
[ 0.220716] pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087]
[ 0.220724] pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093]
[ 0.220732] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
[ 0.220740] pci 0000:00:1f.2: reg 0x24: [mem 0xc3617000-0xc36177ff]
[ 0.220780] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.220832] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.220851] pci 0000:00:1f.3: reg 0x10: [mem 0xc3615000-0xc36150ff 64bit]
[ 0.220871] pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f]
[ 0.220978] pci 0000:01:00.0: [1002:6840] type 00 class 0x030000
[ 0.220994] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.221001] pci 0000:01:00.0: reg 0x18: [mem 0xc2000000-0xc201ffff 64bit]
[ 0.221005] pci 0000:01:00.0: reg 0x20: [io 0x4000-0x40ff]
[ 0.221013] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 0.221018] pci 0000:01:00.0: enabling Extended Tags
[ 0.221048] pci 0000:01:00.0: supports D1 D2
[ 0.232024] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.232029] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 0.232033] pci 0000:00:01.0: bridge window [mem 0xc2000000-0xc2ffffff]
[ 0.232038] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.232129] pci 0000:07:00.0: [1814:539b] type 00 class 0x028000
[ 0.232163] pci 0000:07:00.0: reg 0x10: [mem 0xc3500000-0xc350ffff]
[ 0.244075] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.244081] pci 0000:00:1c.0: bridge window [mem 0xc3500000-0xc35fffff]
[ 0.244157] pci 0000:08:00.0: [10ec:8136] type 00 class 0x020000
[ 0.244194] pci 0000:08:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.244227] pci 0000:08:00.0: reg 0x18: [mem 0xc3404000-0xc3404fff 64bit pref]
[ 0.244249] pci 0000:08:00.0: reg 0x20: [mem 0xc3400000-0xc3403fff 64bit pref]
[ 0.244364] pci 0000:08:00.0: supports D1 D2
[ 0.244365] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.256040] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.256055] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.256063] pci 0000:00:1c.1: bridge window [mem 0xc3400000-0xc34fffff 64bit pref]
[ 0.256207] pci 0000:09:00.0: [10ec:5229] type 00 class 0xff0000
[ 0.256325] pci 0000:09:00.0: reg 0x10: [mem 0xc1000000-0xc1000fff]
[ 0.256856] pci 0000:09:00.0: supports D1 D2
[ 0.256857] pci 0000:09:00.0: PME# supported from D1 D2 D3hot
[ 0.268094] pci 0000:00:1c.2: PCI bridge to [bus 09-0e]
[ 0.268098] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.268101] pci 0000:00:1c.2: bridge window [mem 0xc1000000-0xc1ffffff]
[ 0.268107] pci 0000:00:1c.2: bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
[ 0.268128] pci_bus 0000:00: on NUMA node 0
[ 0.268542] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.268588] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.268633] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.268677] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.268720] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.268763] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.268806] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.268849] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.268970] ACPI: EC: interrupt unblocked
[ 0.268976] ACPI: EC: event unblocked
[ 0.268983] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1d, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.268984] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.269185] SCSI subsystem initialized
[ 0.269201] libata version 3.00 loaded.
[ 0.269201] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.269201] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.269201] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.269201] pci 0000:00:02.0: vgaarb: no bridge control possible
[ 0.269201] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.269201] vgaarb: loaded
[ 0.269201] ACPI: bus type USB registered
[ 0.269201] usbcore: registered new interface driver usbfs
[ 0.269201] usbcore: registered new interface driver hub
[ 0.269201] usbcore: registered new device driver usb
[ 0.269201] EDAC MC: Ver: 3.0.0
[ 0.269201] PCI: Using ACPI for IRQ routing
[ 0.272930] PCI: pci_cache_line_size set to 64 bytes
[ 0.273041] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[ 0.273042] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.273043] e820: reserve RAM buffer [mem 0x9a6bf000-0x9bffffff]
[ 0.273044] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
[ 0.273045] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
[ 0.273136] NetLabel: Initializing
[ 0.273136] NetLabel: domain hash size = 128
[ 0.273137] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.273150] NetLabel: unlabeled traffic allowed by default
[ 0.276686] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.276690] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.278720] clocksource: Switched to clocksource hpet
[ 0.287016] VFS: Disk quotas dquot_6.6.0
[ 0.287031] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.287118] AppArmor: AppArmor Filesystem Enabled
[ 0.287145] pnp: PnP ACPI init
[ 0.287536] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.287538] system 00:00: [io 0x1000-0x100f] has been reserved
[ 0.287539] system 00:00: [io 0xffff] has been reserved
[ 0.287540] system 00:00: [io 0xffff] has been reserved
[ 0.287542] system 00:00: [io 0x0400-0x0453] has been reserved
[ 0.287543] system 00:00: [io 0x0458-0x047f] has been reserved
[ 0.287544] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.287545] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.287546] system 00:00: [io 0x0454-0x0457] has been reserved
[ 0.287548] system 00:00: [io 0x0380-0x0387] has been reserved
[ 0.287552] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.287578] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.287607] pnp 00:02: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[ 0.287635] pnp 00:03: Plug and Play ACPI device, IDs SYN1e60 SYN1e00 SYN0002 PNP0f13 (active)
[ 0.287831] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.287832] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.287834] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.287835] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.287836] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.287838] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.287839] system 00:04: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.287841] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.287842] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.287843] system 00:04: [mem 0x9fa00000-0x9fa00fff] has been reserved
[ 0.287847] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.288038] system 00:05: [mem 0x20000000-0x201fffff] has been reserved
[ 0.288039] system 00:05: [mem 0x40004000-0x40004fff] has been reserved
[ 0.288042] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.288058] pnp: PnP ACPI: found 6 devices
[ 0.288060] PnPBIOS: Disabled by ACPI PNP
[ 0.324424] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.324428] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[ 0.324462] pci 0000:01:00.0: BAR 6: assigned [mem 0xc2020000-0xc203ffff pref]
[ 0.324464] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.324466] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 0.324469] pci 0000:00:01.0: bridge window [mem 0xc2000000-0xc2ffffff]
[ 0.324470] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.324473] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.324478] pci 0000:00:1c.0: bridge window [mem 0xc3500000-0xc35fffff]
[ 0.324486] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.324489] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.324496] pci 0000:00:1c.1: bridge window [mem 0xc3400000-0xc34fffff 64bit pref]
[ 0.324502] pci 0000:00:1c.2: PCI bridge to [bus 09-0e]
[ 0.324505] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.324509] pci 0000:00:1c.2: bridge window [mem 0xc1000000-0xc1ffffff]
[ 0.324512] pci 0000:00:1c.2: bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
[ 0.324519] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.324521] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.324522] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.324523] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff window]
[ 0.324524] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.324525] pci_bus 0000:01: resource 1 [mem 0xc2000000-0xc2ffffff]
[ 0.324526] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.324528] pci_bus 0000:07: resource 1 [mem 0xc3500000-0xc35fffff]
[ 0.324529] pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
[ 0.324530] pci_bus 0000:08: resource 2 [mem 0xc3400000-0xc34fffff 64bit pref]
[ 0.324531] pci_bus 0000:09: resource 0 [io 0x2000-0x2fff]
[ 0.324532] pci_bus 0000:09: resource 1 [mem 0xc1000000-0xc1ffffff]
[ 0.324533] pci_bus 0000:09: resource 2 [mem 0xc0000000-0xc0ffffff 64bit pref]
[ 0.324603] NET: Registered protocol family 2
[ 0.324716] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.324725] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.324737] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.324763] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.324766] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.324798] NET: Registered protocol family 1
[ 0.324810] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.364169] PCI: CLS 64 bytes, default 64
[ 0.364204] Unpacking initramfs...
[ 0.871050] Freeing initrd memory: 35356K
[ 0.871058] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.871060] software IO TLB: mapped [mem 0x2bee1000-0x2fee1000] (64MB)
[ 0.871345] Scanning for low memory corruption every 60 seconds
[ 0.871977] Initialise system trusted keyrings
[ 0.871985] Key type blacklist registered
[ 0.872052] workingset: timestamp_bits=14 max_order=21 bucket_order=7
[ 0.873086] zbud: loaded
[ 0.873367] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.873495] fuse init (API version 7.26)
[ 0.875070] Key type asymmetric registered
[ 0.875071] Asymmetric key parser 'x509' registered
[ 0.875081] bounce: pool size: 64 pages
[ 0.875091] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.875131] io scheduler noop registered
[ 0.875132] io scheduler deadline registered
[ 0.875174] io scheduler cfq registered (default)
[ 0.875832] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[ 0.875833] vesafb: scrolling: redraw
[ 0.875834] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.875843] vesafb: framebuffer at 0xb0000000, mapped to 0x(ptrval), using 4160k, total 4160k
[ 0.875928] Console: switching to colour frame buffer device 170x48
[ 0.875954] fb0: VESA VGA frame buffer device
[ 0.875966] intel_idle: MWAIT substates: 0x21120
[ 0.875967] intel_idle: v0.4.1 model 0x3A
[ 0.876129] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.876356] ACPI: AC Adapter [ACAD] (off-line)
[ 0.876406] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.876414] ACPI: Lid Switch [LID0]
[ 0.876440] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.876448] ACPI: Power Button [PWRB]
[ 0.876484] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.876512] ACPI: Power Button [PWRF]
[ 0.877730] [Firmware Bug]: Invalid critical threshold (0)
[ 0.878967] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 0.879536] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.879537] ACPI: Thermal Zone [TZ01] (48 C)
[ 0.879623] isapnp: Scanning for PnP cards...
[ 0.879683] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.881815] Linux agpgart interface v0.103
[ 0.930820] loop: module loaded
[ 0.931021] libphy: Fixed MDIO Bus: probed
[ 0.931022] tun: Universal TUN/TAP device driver, 1.6
[ 0.931060] PPP generic driver version 2.4.2
[ 0.931104] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.931106] ehci-pci: EHCI PCI platform driver
[ 0.931233] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.931239] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.931251] ehci-pci 0000:00:1a.0: debug port 2
[ 0.935162] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.935175] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc3619000
[ 0.942508] ACPI: Battery Slot [BAT0] (battery present)
[ 0.948023] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.948066] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.948068] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.948069] usb usb1: Product: EHCI Host Controller
[ 0.948071] usb usb1: Manufacturer: Linux 4.15.0-91-generic ehci_hcd
[ 0.948072] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.948216] hub 1-0:1.0: USB hub found
[ 0.948223] hub 1-0:1.0: 2 ports detected
[ 0.948445] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.948450] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.948461] ehci-pci 0000:00:1d.0: debug port 2
[ 0.952371] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.952382] ehci-pci 0000:00:1d.0: irq 20, io mem 0xc3618000
[ 0.968024] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.968065] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.968067] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.968068] usb usb2: Product: EHCI Host Controller
[ 0.968070] usb usb2: Manufacturer: Linux 4.15.0-91-generic ehci_hcd
[ 0.968071] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.968210] hub 2-0:1.0: USB hub found
[ 0.968217] hub 2-0:1.0: 2 ports detected
[ 0.968334] ehci-platform: EHCI generic platform driver
[ 0.968347] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.968350] ohci-pci: OHCI PCI platform driver
[ 0.968359] ohci-platform: OHCI generic platform driver
[ 0.968367] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.968487] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.968491] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.969582] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
[ 0.969587] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.969729] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.969731] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.969732] usb usb3: Product: xHCI Host Controller
[ 0.969734] usb usb3: Manufacturer: Linux 4.15.0-91-generic xhci-hcd
[ 0.969735] usb usb3: SerialNumber: 0000:00:14.0
[ 0.969870] hub 3-0:1.0: USB hub found
[ 0.969881] hub 3-0:1.0: 4 ports detected
[ 0.970258] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.970261] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.970264] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.970302] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.970304] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.970305] usb usb4: Product: xHCI Host Controller
[ 0.970307] usb usb4: Manufacturer: Linux 4.15.0-91-generic xhci-hcd
[ 0.970308] usb usb4: SerialNumber: 0000:00:14.0
[ 0.970442] hub 4-0:1.0: USB hub found
[ 0.970452] hub 4-0:1.0: 4 ports detected
[ 0.970857] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.978361] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.978366] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.978562] mousedev: PS/2 mouse device common for all mice
[ 0.978869] rtc_cmos 00:01: RTC can wake from S4
[ 0.979023] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.979050] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.979057] i2c /dev entries driver
[ 0.979131] device-mapper: uevent: version 1.0.3
[ 0.979196] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 0.979217] platform eisa.0: Probing EISA bus 0
[ 0.979219] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.979221] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.979222] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.979224] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.979225] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.979226] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.979228] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.979229] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.979231] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.979232] platform eisa.0: EISA: Detected 0 cards
[ 0.979236] cpufreq_nforce2: No nForce2 chipset
[ 0.979240] intel_pstate: Intel P-state driver initializing
[ 0.991894] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.146894] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.147073] NET: Registered protocol family 10
[ 1.151159] Segment Routing with IPv6
[ 1.151184] NET: Registered protocol family 17
[ 1.151222] Key type dns_resolver registered
[ 1.190460] isapnp: No Plug & Play device found
[ 1.190742] mce: Using 7 MCE banks
[ 1.190775] microcode: sig=0x306a9, pf=0x10, revision=0x21
[ 1.190913] microcode: Microcode Update Driver: v2.2.
[ 1.190917] Using IPI No-Shortcut mode
[ 1.190923] sched_clock: Marking stable (1190907126, 0)->(1180834173, 10072953)
[ 1.191167] registered taskstats version 1
[ 1.191174] Loading compiled-in X.509 certificates
[ 1.195600] Loaded X.509 cert 'Build time autogenerated kernel key: d53ce027197ed19207eb6575fd957306e2e2cb32'
[ 1.195615] zswap: loaded using pool lzo/zbud
[ 1.199292] Key type big_key registered
[ 1.199297] Key type trusted registered
[ 1.201114] Key type encrypted registered
[ 1.201117] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.201119] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.201123] ima: Allocated hash algorithm: sha1
[ 1.201136] evm: HMAC attrs: 0x1
[ 1.201500] Magic number: 0:159:38
[ 1.201510] bdi 7:3: hash matches
[ 1.201623] rtc_cmos 00:01: setting system clock to 2020-04-04 18:01:29 UTC (1586023289)
[ 1.201667] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.201667] EDD information not available.
[ 1.202523] Freeing unused kernel image memory: 1104K
[ 1.244212] Write protecting the kernel text: 8960k
[ 1.244270] Write protecting the kernel read-only data: 3468k
[ 1.244270] NX-protecting the kernel data: 7424k
[ 1.244425] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.244449] x86/mm: Checking user space page tables
[ 1.244463] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.288030] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.312038] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.312055] usb 3-1: new low-speed USB device number 2 using xhci_hcd
[ 1.370238] ahci 0000:00:1f.2: version 3.0
[ 1.370869] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.370876] r8169 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.371310] r8169 0000:08:00.0 eth0: RTL8105e at 0x(ptrval), 38:ea:a7:e7:f6:8b, XID 00c00000 IRQ 26
[ 1.383754] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode
[ 1.383758] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.384351] random: fast init done
[ 1.384551] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.384585] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.384592] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.385106] r8169 0000:08:00.0 eno1: renamed from eth0
[ 1.392655] scsi host0: ahci
[ 1.392763] scsi host1: ahci
[ 1.392872] scsi host2: ahci
[ 1.392956] scsi host3: ahci
[ 1.393026] scsi host4: ahci
[ 1.393098] scsi host5: ahci
[ 1.393129] ata1: SATA max UDMA/133 abar m2048@0xc3617000 port 0xc3617100 irq 25
[ 1.393130] ata2: DUMMY
[ 1.393130] ata3: DUMMY
[ 1.393131] ata4: DUMMY
[ 1.393133] ata5: SATA max UDMA/133 abar m2048@0xc3617000 port 0xc3617300 irq 25
[ 1.393134] ata6: DUMMY
[ 1.444468] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.444469] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.444793] hub 1-1:1.0: USB hub found
[ 1.444854] hub 1-1:1.0: 6 ports detected
[ 1.473086] usb 3-1: New USB device found, idVendor=1c4f, idProduct=0048
[ 1.473089] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.473090] usb 3-1: Product: Usb Mouse
[ 1.473091] usb 3-1: Manufacturer: SIGMACHIP
[ 1.476845] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.476847] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.477198] hub 2-1:1.0: USB hub found
[ 1.477466] hub 2-1:1.0: 6 ports detected
[ 1.600133] usb 3-2: new high-speed USB device number 3 using xhci_hcd
[ 1.707735] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.707767] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.708950] ata1.00: ATA-8: TOSHIBA MQ01ABD075, AX001C, max UDMA/100
[ 1.708954] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.710501] ata1.00: configured for UDMA/100
[ 1.710557] ata5.00: ATAPI: hp DVDRAM GT80N, R102, max UDMA/100
[ 1.710790] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD0 1C PQ: 0 ANSI: 5
[ 1.711173] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
[ 1.711174] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.711182] sd 0:0:0:0: [sda] Write Protect is off
[ 1.711184] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.711196] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.711199] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.715390] ata5.00: configured for UDMA/100
[ 1.720633] scsi 4:0:0:0: CD-ROM hp DVDRAM GT80N R102 PQ: 0 ANSI: 5
[ 1.752620] usb 3-2: New USB device found, idVendor=0781, idProduct=5567
[ 1.752621] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.752622] usb 3-2: Product: Cruzer Blade
[ 1.752623] usb 3-2: Manufacturer: SanDisk
[ 1.752624] usb 3-2: SerialNumber: 4C530000220211119523
[ 1.762279] usb-storage 3-2:1.0: USB Mass Storage device detected
[ 1.762578] scsi host6: usb-storage 3-2:1.0
[ 1.762622] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.762663] usbcore: registered new interface driver usb-storage
[ 1.764181] usb 2-1.5: new high-speed USB device number 3 using ehci-pci
[ 1.766071] usbcore: registered new interface driver uas
[ 1.768420] usbcore: registered new interface driver usbhid
[ 1.768422] usbhid: USB HID core driver
[ 1.772514] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:1C4F:0048.0001/input/input6
[ 1.772634] hid-generic 0003:1C4F:0048.0001: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:14.0-1/input0
[ 1.779620] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.779622] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.779728] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.779805] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 1.834220] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10
[ 1.835081] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.884151] tsc: Refined TSC clocksource calibration: 2594.111 MHz
[ 1.884165] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2564811980e, max_idle_ns: 440795290434 ns
[ 1.955561] usb 2-1.5: New USB device found, idVendor=04f2, idProduct=b34f
[ 1.955566] usb 2-1.5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.955568] usb 2-1.5: Product: HP Truevision HD
[ 1.955571] usb 2-1.5: Manufacturer: Chicony Electronics Co.,Ltd.
[ 1.955573] usb 2-1.5: SerialNumber: 0x0001
[ 2.097795] psmouse serio1: synaptics: queried max coordinates: x [..5734], y [..4974]
[ 2.129196] psmouse serio1: synaptics: queried min coordinates: x [1222..], y [910..]
[ 2.189566] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00173/0x240000/0xa2400/0x0, board id: 2068, fw id: 1028260
[ 2.228275] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 2.309636] mmc0: cannot verify signal voltage switch
[ 2.441029] mmc0: tuning execution failed: -22
[ 2.441034] mmc0: error -22 whilst initialising SD card
[ 2.784591] scsi 6:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 6
[ 2.784941] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 2.785108] sd 6:0:0:0: [sdb] 30892032 512-byte logical blocks: (15.8 GB/14.7 GiB)
[ 2.786203] sd 6:0:0:0: [sdb] Write Protect is off
[ 2.786206] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 2.786437] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.789411] sdb: sdb1
[ 2.790284] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 2.908107] clocksource: Switched to clocksource tsc
[ 3.432541] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 3.441735] mmc0: cannot verify signal voltage switch
[ 3.663865] mmc0: tuning execution failed: -22
[ 3.663872] mmc0: error -22 whilst initialising SD card
[ 4.060974] random: crng init done
[ 4.060978] random: 7 urandom warning(s) missed due to ratelimiting
[ 4.661658] mmc0: cannot verify signal voltage switch
[ 4.797462] mmc0: tuning execution failed: -22
[ 4.797468] mmc0: error -22 whilst initialising SD card
[ 5.355796] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.452493] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 5.472154] systemd[1]: Detected architecture x86.
[ 5.491712] systemd[1]: Set hostname to <hanspeter-HP-Pavilion-g6-Notebook-PC>.
[ 8.287127] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 8.287167] systemd[1]: Reached target Remote File Systems.
[ 8.287366] systemd[1]: Created slice System Slice.
[ 8.287471] systemd[1]: Listening on Journal Socket (/dev/log).
[ 8.287596] systemd[1]: Listening on Journal Audit Socket.
[ 8.287641] systemd[1]: Listening on udev Kernel Socket.
[ 8.287706] systemd[1]: Listening on udev Control Socket.
[ 8.674227] EXT4-fs (sda10): re-mounted. Opts: errors=remount-ro
[ 8.992543] systemd-journald[290]: Received request to flush runtime journal from PID 1
[ 9.309997] lp: driver loaded but no devices found
[ 9.767872] ppdev: user-space parallel port driver
[ 15.511047] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM
[ 15.511115] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
[ 15.511121] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
[ 15.511126] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.511128] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[ 15.511132] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[ 15.511136] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170831/utaddress-247)
[ 15.511140] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170831/utaddress-247)
[ 15.511144] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.LPCB.GPIO) (20170831/utaddress-247)
[ 15.511147] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.LPCB.GPIO) (20170831/utaddress-247)
[ 15.511150] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.511151] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[ 15.511154] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[ 15.511158] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170831/utaddress-247)
[ 15.511162] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170831/utaddress-247)
[ 15.511165] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.LPCB.GPIO) (20170831/utaddress-247)
[ 15.511168] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.LPCB.GPIO) (20170831/utaddress-247)
[ 15.511172] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.511172] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[ 15.511176] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[ 15.511179] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170831/utaddress-247)
[ 15.511183] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170831/utaddress-247)
[ 15.511186] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.LPCB.GPIO) (20170831/utaddress-247)
[ 15.511190] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.LPCB.GPIO) (20170831/utaddress-247)
[ 15.511193] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.511194] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 15.869525] input: HP Wireless hotkeys as /devices/virtual/input/input7
[ 15.874060] hp_accel: laptop model unknown, using default axes configuration
[ 15.887553] lis3lv02d: 8 bits 3DC sensor found
[ 15.887604] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.940152] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input8
[ 15.978459] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[ 15.978479] wmi_bus wmi_bus-PNP0C14:00: WQBJ data block query control method not found
[ 16.576816] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 16.580155] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 17.037681] [drm] Memory usable by graphics device = 2048M
[ 17.037685] checking generic (b0000000 410000) vs hw (b0000000 10000000)
[ 17.037686] fb: switching to inteldrmfb from VESA VGA
[ 17.037720] Console: switching to colour dummy device 80x25
[ 17.037815] [drm] Replacing VGA console driver
[ 17.043714] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 17.043715] [drm] Driver supports precise vblank timestamp query.
[ 17.046261] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 17.085650] ------------[ cut here ]------------
[ 17.085651] Could not determine valid watermarks for inherited state
[ 17.085722] WARNING: CPU: 0 PID: 414 at /build/linux-7TEknW/linux-4.15.0/drivers/gpu/drm/i915/intel_display.c:14537 intel_modeset_init+0xf02/0xf40 [i915]
[ 17.085723] Modules linked in: i915(+) mac80211 input_leds snd_seq snd_seq_device joydev cfg80211 snd_timer drm_kms_helper serio_raw eeprom_93cx6 rtsx_pci_ms memstick drm wmi shpchp hp_accel hp_wireless snd i2c_algo_bit fb_sys_fops syscopyarea mac_hid mei_me lis3lv02d mei input_polldev video lpc_ich soundcore sysfillrect sysimgblt sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid uas hid usb_storage rtsx_pci_sdmmc psmouse rtsx_pci r8169 ahci libahci mii
[ 17.085748] CPU: 0 PID: 414 Comm: systemd-udevd Not tainted 4.15.0-91-generic #92-Ubuntu
[ 17.085751] Hardware name: Hewlett-Packard HP Pavilion g6 Notebook PC/183E, BIOS F.25 05/29/2013
[ 17.085797] EIP: intel_modeset_init+0xf02/0xf40 [i915]
[ 17.085798] EFLAGS: 00010292 CPU: 0
[ 17.085799] EAX: 00000038 EBX: f420a000 ECX: f611f670 EDX: 00000007
[ 17.085800] ESI: f50f5180 EDI: f41fc000 EBP: f4075cd4 ESP: f4075c88
[ 17.085802] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 17.085803] CR0: 80050033 CR2: f9200000 CR3: 34076000 CR4: 001406f0
[ 17.085804] Call Trace:
[ 17.085846] i915_driver_load+0x91e/0xcd0 [i915]
[ 17.085852] ? acpi_dev_found+0x6c/0x80
[ 17.085891] ? i915_pci_remove+0x20/0x20 [i915]
[ 17.085928] i915_pci_probe+0x3a/0x70 [i915]
[ 17.085932] pci_device_probe+0xcc/0x170
[ 17.085936] driver_probe_device+0x2b7/0x450
[ 17.085939] __driver_attach+0xc1/0xf0
[ 17.085942] ? driver_probe_device+0x450/0x450
[ 17.085944] bus_for_each_dev+0x5a/0xa0
[ 17.085947] driver_attach+0x19/0x20
[ 17.085949] ? driver_probe_device+0x450/0x450
[ 17.085952] bus_add_driver+0x187/0x230
[ 17.085954] ? 0xf86c0000
[ 17.085957] driver_register+0x56/0xd0
[ 17.085959] ? 0xf86c0000
[ 17.085961] __pci_register_driver+0x3a/0x40
[ 17.085997] i915_init+0x51/0x56 [i915]
[ 17.086001] do_one_initcall+0x49/0x174
[ 17.086005] ? _cond_resched+0x17/0x40
[ 17.086008] ? kmem_cache_alloc_trace+0x165/0x1d0
[ 17.086012] ? do_init_module+0x21/0x1ec
[ 17.086015] ? do_init_module+0x21/0x1ec
[ 17.086017] do_init_module+0x50/0x1ec
[ 17.086020] load_module+0x13cb/0x1bf0
[ 17.086025] ? security_kernel_post_read_file+0x62/0x70
[ 17.086029] SyS_finit_module+0x8a/0xe0
[ 17.086033] do_fast_syscall_32+0x7f/0x200
[ 17.086037] entry_SYSENTER_32+0x6b/0xbe
[ 17.086039] EIP: 0xb7fa7d09
[ 17.086040] EFLAGS: 00000296 CPU: 0
[ 17.086041] EAX: ffffffda EBX: 00000015 ECX: b7d9ea15 EDX: 00000000
[ 17.086042] ESI: 0086fd70 EDI: 0086c840 EBP: 00869930 ESP: bf803aec
[ 17.086043] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b
[ 17.086045] Code: 00 00 00 e9 4e fc ff ff 90 68 f4 80 bc f8 68 4c 74 bc f8 e8 01 38 51 e2 0f 0b 5f 58 e9 73 fe ff ff 68 60 b2 bd f8 e8 ee 37 51 e2 <0f> 0b 58 e9 4f fe ff ff 68 01 81 bc f8 68 4c 74 bc f8 e8 d7 37
[ 17.086069] ---[ end trace ffb9944755cbb2f4 ]---
[ 17.089518] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[ 17.089657] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 17.090048] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 17.090232] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input9
[ 17.090565] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 17.090645] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10
[ 17.125841] fbcon: inteldrmfb (fb0) is primary device
[ 17.125914] Console: switching to colour frame buffer device 170x48
[ 17.125937] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 18.186618] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 18.186620] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 18.186621] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 18.186621] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 18.581651] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 1502 detected
[ 18.585743] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5390 detected
[ 18.639847] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 19.230707] [drm] radeon kernel modesetting enabled.
[ 19.230727] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[ 19.230841] ATPX version 1, functions 0x00000033
[ 19.230996] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[ 19.232992] [drm] initializing kernel modesetting (TURKS 0x1002:0x6840 0x103C:0x183E 0x00).
[ 19.233006] vga_switcheroo: enabled
[ 19.247474] ATOM BIOS: P/Quanta
[ 19.247569] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 19.247570] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[ 19.247574] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 19.247574] [drm] RAM width 128bits DDR
[ 19.247619] [TTM] Zone kernel: Available graphics memory: 369984 kiB
[ 19.247620] [TTM] Zone highmem: Available graphics memory: 4059842 kiB
[ 19.247620] [TTM] Initializing pool allocator
[ 19.247624] [TTM] Initializing DMA pool allocator
[ 19.247638] [drm] radeon: 1024M of VRAM memory ready
[ 19.247639] [drm] radeon: 1024M of GTT memory ready.
[ 19.247645] [drm] Loading TURKS Microcode
[ 19.728165] input: HP WMI hotkeys as /devices/virtual/input/input11
[ 19.801696] [drm] Internal thermal controller with fan control
[ 19.803653] [drm] radeon: dpm initialized
[ 20.021966] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 20.023157] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 20.027459] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[ 20.027550] radeon 0000:01:00.0: WB enabled
[ 20.027553] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x37589adc
[ 20.027554] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xb2f50380
[ 20.028356] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x8887a752
[ 20.028358] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 20.028358] [drm] Driver supports precise vblank timestamp query.
[ 20.028359] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 20.028397] radeon 0000:01:00.0: radeon: using MSI.
[ 20.028431] [drm] radeon: irq initialized.
[ 20.044776] [drm] ring test on 0 succeeded in 1 usecs
[ 20.044782] [drm] ring test on 3 succeeded in 3 usecs
[ 20.220456] [drm] ring test on 5 succeeded in 1 usecs
[ 20.220461] [drm] UVD initialized successfully.
[ 20.220754] [drm] ib test on ring 0 succeeded in 0 usecs
[ 20.220852] [drm] ib test on ring 3 succeeded in 0 usecs
[ 20.371652] rt2800pci 0000:07:00.0 wlo1: renamed from wlan0
[ 20.651900] media: Linux media interface: v0.10
[ 20.701381] Linux video capture interface: v2.00
[ 20.755602] kvm: disabled by bios
[ 20.797342] kvm: disabled by bios
[ 20.829268] kvm: disabled by bios
[ 20.881685] kvm: disabled by bios
[ 20.882504] uvcvideo: Found UVC 1.00 device HP Truevision HD (04f2:b34f)
[ 20.892102] [drm] ib test on ring 5 succeeded
[ 20.893662] uvcvideo 2-1.5:1.0: Entity type for entity Extension 4 was not initialized!
[ 20.893665] uvcvideo 2-1.5:1.0: Entity type for entity Processing 2 was not initialized!
[ 20.893666] uvcvideo 2-1.5:1.0: Entity type for entity Camera 1 was not initialized!
[ 20.893749] input: HP Truevision HD: HP Truevision as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input12
[ 20.893831] usbcore: registered new interface driver uvcvideo
[ 20.893832] USB Video Class driver (1.1.1)
[ 20.895197] [drm] Radeon Display Connectors
[ 20.905563] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 1
[ 21.081188] intel_rapl: Found RAPL domain package
[ 21.081189] intel_rapl: Found RAPL domain core
[ 21.081190] intel_rapl: Found RAPL domain uncore
[ 21.081194] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 21.441700] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 21.557547] audit: type=1400 audit(1586023309.850:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=530 comm="apparmor_parser"
[ 21.557551] audit: type=1400 audit(1586023309.850:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=530 comm="apparmor_parser"
[ 21.557552] audit: type=1400 audit(1586023309.850:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=530 comm="apparmor_parser"
[ 21.742660] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD87B2/4: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[ 21.742662] snd_hda_codec_idt hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 21.742663] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 21.742664] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
[ 21.742665] snd_hda_codec_idt hdaudioC0D0: inputs:
[ 21.742666] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11
[ 21.742667] snd_hda_codec_idt hdaudioC0D0: Mic=0xc
[ 21.788321] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 21.788401] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 21.788487] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 21.807677] audit: type=1400 audit(1586023310.098:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=525 comm="apparmor_parser"
[ 21.807681] audit: type=1400 audit(1586023310.098:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=525 comm="apparmor_parser"
[ 21.807684] audit: type=1400 audit(1586023310.098:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=525 comm="apparmor_parser"
[ 21.807687] audit: type=1400 audit(1586023310.098:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=525 comm="apparmor_parser"
[ 21.814231] audit: type=1400 audit(1586023310.106:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=815 comm="apparmor_parser"
[ 21.814235] audit: type=1400 audit(1586023310.106:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=815 comm="apparmor_parser"
[ 21.867787] audit: type=1400 audit(1586023310.158:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=524 comm="apparmor_parser"
[ 29.658196] Adding 8278012k swap on /dev/sda7. Priority:-2 extents:1 across:8278012k FS
[ 35.448812] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 35.454803] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[ 35.454882] radeon 0000:01:00.0: WB enabled
[ 35.454885] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x37589adc
[ 35.454886] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xb2f50380
[ 35.455674] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x8887a752
[ 35.471802] [drm] ring test on 0 succeeded in 1 usecs
[ 35.471808] [drm] ring test on 3 succeeded in 3 usecs
[ 35.647469] [drm] ring test on 5 succeeded in 1 usecs
[ 35.647474] [drm] UVD initialized successfully.
[ 35.647575] [drm] ib test on ring 0 succeeded in 0 usecs
[ 35.647670] [drm] ib test on ring 3 succeeded in 0 usecs
[ 36.316262] [drm] ib test on ring 5 succeeded
[ 45.386950] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 45.678066] r8169 0000:08:00.0 eno1: link down
[ 45.678086] r8169 0000:08:00.0 eno1: link down
[ 45.678221] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 45.684836] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 47.171901] r8169 0000:08:00.0 eno1: link up
[ 47.171917] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 52.198863] vboxdrv: loading out-of-tree module taints kernel.
[ 52.199000] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 52.204939] vboxdrv: Found 4 processor cores
[ 52.224407] vboxdrv: TSC mode is Invariant, tentative frequency 2594107624 Hz
[ 52.224410] vboxdrv: Successfully loaded version 5.2.34_Ubuntu (interface 0x00290001)
[ 52.985625] VBoxNetFlt: Successfully started.
[ 53.294906] VBoxNetAdp: Successfully started.
[ 53.691403] VBoxPciLinuxInit
[ 53.932581] vboxpci: IOMMU not found (not registered)
[ 56.856668] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 56.862648] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[ 56.862727] radeon 0000:01:00.0: WB enabled
[ 56.862729] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x37589adc
[ 56.862730] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xb2f50380
[ 56.863526] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x8887a752
[ 56.879688] [drm] ring test on 0 succeeded in 1 usecs
[ 56.879705] [drm] ring test on 3 succeeded in 3 usecs
[ 57.065308] [drm] ring test on 5 succeeded in 1 usecs
[ 57.065313] [drm] UVD initialized successfully.
[ 57.065414] [drm] ib test on ring 0 succeeded in 0 usecs
[ 57.065509] [drm] ib test on ring 3 succeeded in 0 usecs
[ 57.724208] [drm] ib test on ring 5 succeeded
[ 92.623213] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
hanspeter@hanspeter-HP-Pavilion-g6-Notebook-PC:~$ sudo journalctl --boot
[sudo] Passwort für hanspeter:
-- Logs begin at Sat 2019-06-22 22:34:26 CEST, end at Sat 2020-04-04 20:27:21 CE
Apr 04 20:01:36 hanspeter-HP-Pavilion-g6-Notebook-PC kernel: Linux version 4.15.
Apr 04 20:01:36 hanspeter-HP-Pavilion-g6-Notebook-PC kernel: KERNEL supported cp
Apr 04 20:01:36 hanspeter-HP-Pavilion-g6-Notebook-PC kernel: Intel GenuineInte
Apr 04 20:01:36 hanspeter-HP-Pavilion-g6-Notebook-PC kernel: AMD AuthenticAMD
Apr 04 20:01:36 hanspeter-HP-Pavilion-g6-Notebook-PC kernel: NSC Geode by NSC
Apr 04 20:01:36 hanspeter-HP-Pavilion-g6-Notebook-PC kernel: Cyrix CyrixInstea
Apr 04 20:01:36 hanspeter-HP-Pavilion-g6-Notebook-PC kernel: Centaur CentaurHa
Apr 04 20:01:36 hanspeter-HP-Pavilion-g6-Notebook-PC kernel: Transmeta Genuine
Apr 04 20:01:36 hanspeter-HP-Pavilion-g6-Notebook-PC kernel: Transmeta Transme
Apr 04 20:01:36 hanspeter-HP-Pavilion-g6-Notebook-PC kernel: UMC UMC UMC UMC
Apr 04 20:01:36 hanspeter-HP-Pavilion-g6-Notebook-PC kernel: x86/fpu: Supporting
Apr 04 20:01:36 hanspeter-HP-Pavilion-g6-Notebook-PC kernel: x86/fpu: Supporting
Apr 04 20:01:36 hanspeter-HP-Pavilion-g6-Notebook-PC kernel: x86/fpu: Supporting
Apr 04 20:01:36 hanspeter-HP-Pavilion-g6-Notebook-PC kernel: x86/fpu: xstate_off
Apr 04 20:01:36 hanspeter-HP-Pavilion-g6-Notebook-PC kernel: x86/fpu: Enabled xs
Apr 04 20:01:36 hanspeter-HP-Pavilion-g6-Notebook-PC kernel: e820: BIOS-provided
Apr 04 20:01:36 hanspeter-HP-Pavilion-g6-Notebook-PC kernel: BIOS-e820: [mem 0x0
Apr 04 20:01:36 hanspeter-HP-Pavilion-g6-Notebook-PC kernel: BIOS-e820: [mem 0x0
Apr 04 20:01:36 hanspeter-HP-Pavilion-g6-Notebook-PC kernel: BIOS-e820: [mem 0x0
Apr 04 20:01:36 hanspeter-HP-Pavilion-g6-Notebook-PC kernel: BIOS-e820: [mem 0x0
Apr 04 20:01:36 hanspeter-HP-Pavilion-g6-Notebook-PC kernel: BIOS-e820: [mem 0x0
Apr 04 20:01:36 hanspeter-HP-Pavilion-g6-Notebook-PC kernel: BIOS-e820: [mem 0x0
lines 1-23
Bearbeitet von sebix:
Bitte verwende in Zukunft Codeblöcke, um die Übersicht im Forum zu verbessern!