Simion
Anmeldungsdatum: 14. August 2018
Beiträge: 79
|
Hallo, ich verwende Ubuntu auf einem Intel NUC Computer. Der NUC Computer hat einen integrierten SD-Kartenleser, den ich jedoch bei der Installation von Ubuntu im BIOS deaktiviert hatte. Jetzt müsste ich den SD-Kartenleser verwenden und habe ihn deshalb im BIOS aktiviert. Wenn ich jedoch eine SD-Karte einstecke, kann ich diese jedoch in den Dateien nicht sehen. Ich hätte hier ein Verhalten erwartet, wie wenn ich einen USB-Stick einstecken würde. lspci
00:1c.0 SD Host controller: Intel Corporation Device 31cc (rev 03) Könntet Ihr mir hier bitte weiterhelfen? Vielen Dank und viele Grüße
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Moin, öffne ein Terminal und gebe folgendes ein – lasse das Terminal auf journalctl -f stecke nun eine SD Karte in den Slot und zeige die Terminal Ausgabe.
|
Simion
(Themenstarter)
Anmeldungsdatum: 14. August 2018
Beiträge: 79
|
Hallo, ich erhalte folgende Ausgabe: journalctl -f
-- Logs begin at Wed 2019-12-18 20:21:04 CET. --
Apr 08 17:03:10 <name>-NUC7PJYH anacron[2564]: Anacron 2.3 started on 2020-04-08
Apr 08 17:03:10 <name>-NUC7PJYH anacron[2564]: Normal exit (0 jobs run)
Apr 08 17:16:00 <name>-NUC7PJYH gnome-shell[1366]: JS WARNING: [resource:///org/gnome/shell/ui/notificationDaemon.js 121]: reference to undefined property "image-path"
Apr 08 17:17:01 <name>-NUC7PJYH CRON[2593]: pam_unix(cron:session): session opened for user root by (uid=0)
Apr 08 17:17:01 <name>-NUC7PJYH CRON[2594]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Apr 08 17:17:01 <name>-NUC7PJYH CRON[2593]: pam_unix(cron:session): session closed for user root
Apr 08 17:26:34 <name>-NUC7PJYH dbus-daemon[1231]: [session uid=1000 pid=1231] Activating via systemd: service name='org.gnome.Terminal' unit='gnome-terminal-server.service' requested by ':1.95' (uid=1000 pid=2628 comm="/usr/bin/gnome-terminal.real " label="unconfined")
Apr 08 17:26:34 <name>-NUC7PJYH systemd[1159]: Starting GNOME Terminal Server...
Apr 08 17:26:34 <name>-NUC7PJYH dbus-daemon[1231]: [session uid=1000 pid=1231] Successfully activated service 'org.gnome.Terminal'
Apr 08 17:26:34 <name>-NUC7PJYH systemd[1159]: Started GNOME Terminal Server. Wobei ich anmerken muss, dass das Einstecken der SD-Karte zu keiner Änderung/Ergänzung der Ausgabe führt. In der Ausgabe habe ich meinem Namen im Computername durch "<name>" ersetzt.
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Stimmt,da ist nichts Registriert wurden.Wird er erkannt ? sudo lshw dmesg | grep firm
|
Simion
(Themenstarter)
Anmeldungsdatum: 14. August 2018
Beiträge: 79
|
Hallo, also ganz sicher bin ich nicht. Aber folgendes könnte der SD-Card-Reader sein: *-generic
Beschreibung: SD Host controller
Produkt: Intel Corporation
Hersteller: Intel Corporation
Physische ID: 1c
Bus-Informationen: pci@0000:00:1c.0
Version: 03
Breite: 64 bits
Takt: 33MHz
Fähigkeiten: pm bus_master cap_list
Konfiguration: driver=sdhci-pci latency=0
Ressourcen: irq:39 memory:a131c000-a131cfff memory:a131b000-a131bfff
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Das ist zumindest was mit SD 😬 Zeige bitte mal die Vollständige Ausgabe(n).
|
Simion
(Themenstarter)
Anmeldungsdatum: 14. August 2018
Beiträge: 79
|
sudo lshw
[sudo] Passwort für <name>:
<name>-nuc7pjyh
Beschreibung: Computer
Produkt: NUC7PJYH
Hersteller: Intel Corporation
Version: J67992-401
Seriennummer: G6JY82300CYL
Breite: 64 bits
Fähigkeiten: smbios-3.1 dmi-3.1 smp vsyscall32
Konfiguration: boot=normal family=Intel NUC uuid=916711B1-751C-A143-D667-94C691A060BF
*-core
Beschreibung: Hauptplatine
Produkt: NUC7JYB
Hersteller: Intel Corporation
Physische ID: 0
Version: J67969-401
Seriennummer: GEJY82200BVX
Steckplatz: Default string
*-firmware
Beschreibung: BIOS
Hersteller: Intel Corp.
Physische ID: 0
Version: JYGLKCPX.86A.0050.2019.0418.1441
date: 04/18/2019
Größe: 64KiB
Kapazität: 6592KiB
Fähigkeiten: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int14serial int17printer acpi usb biosbootspecification uefi
*-memory
Beschreibung: Systemspeicher
Physische ID: 18
Steckplatz: Systemplatine oder Hauptplatine
Größe: 8GiB
*-bank:0
Beschreibung: SODIMM DDR4 Synchron 2400 MHz (0,4 ns)
Produkt: CT4G4SFS824A.C8FE
Hersteller: Crucial
Physische ID: 0
Seriennummer: 28241518
Steckplatz: SODIMM1
Größe: 4GiB
Breite: 64 bits
Takt: 2400MHz (0.4ns)
*-bank:1
Beschreibung: SODIMM DDR4 Synchron 2400 MHz (0,4 ns)
Produkt: CT4G4SFS824A.C8FBD
Hersteller: Crucial
Physische ID: 1
Seriennummer: 22245020
Steckplatz: SODIMM2
Größe: 4GiB
Breite: 64 bits
Takt: 2400MHz (0.4ns)
*-cache:0
Beschreibung: L1 Cache
Physische ID: 24
Steckplatz: e
Größe: 224KiB
Kapazität: 224KiB
Fähigkeiten: synchronous internal write-back
Konfiguration: level=1
*-cache:1
Beschreibung: L2 Cache
Physische ID: 25
Größe: 4MiB
Kapazität: 4MiB
Fähigkeiten: synchronous internal write-back unified
Konfiguration: level=2
*-cpu
Beschreibung: CPU
Produkt: Intel(R) Pentium(R) Silver J5005 CPU @ 1.50GHz
Hersteller: Intel Corp.
Physische ID: 26
Bus-Informationen: cpu@0
Version: Intel(R) Pentium(R) Silver J5005 CPU @ 1.50GHz
Steckplatz: SOCKET 0
Größe: 687MHz
Kapazität: 2800MHz
Breite: 64 bits
Takt: 100MHz
Fähigkeiten: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave rdrand lahf_lm 3dnowprefetch cpuid_fault cat_l2 pti cdp_l2 ssbd ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust smep erms mpx rdt_a rdseed smap clflushopt intel_pt sha_ni xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts umip rdpid md_clear arch_capabilities cpufreq
Konfiguration: cores=4 enabledcores=4 threads=4
*-pci
Beschreibung: Host bridge
Produkt: Intel Corporation
Hersteller: Intel Corporation
Physische ID: 100
Bus-Informationen: pci@0000:00:00.0
Version: 03
Breite: 32 bits
Takt: 33MHz
*-display
Beschreibung: VGA compatible controller
Produkt: Intel Corporation
Hersteller: Intel Corporation
Physische ID: 2
Bus-Informationen: pci@0000:00:02.0
Version: 03
Breite: 64 bits
Takt: 33MHz
Fähigkeiten: pciexpress msi pm vga_controller bus_master cap_list rom
Konfiguration: driver=i915 latency=0
Ressourcen: irq:128 memory:a0000000-a0ffffff memory:90000000-9fffffff ioport:f000(Größe=64) memory:c0000-dffff
*-network
Beschreibung: Kabellose Verbindung
Produkt: Intel Corporation
Hersteller: Intel Corporation
Physische ID: c
Bus-Informationen: pci@0000:00:0c.0
Logischer Name: wlo2
Version: 03
Seriennummer: 74:70:fd:5d:c8:70
Breite: 64 bits
Takt: 33MHz
Fähigkeiten: pm msi pciexpress msix bus_master cap_list ethernet physical wireless
Konfiguration: broadcast=yes driver=iwlwifi driverversion=5.3.0-46-generic firmware=46.6bf1df06.0 latency=0 link=no multicast=yes wireless=IEEE 802.11
Ressourcen: irq:44 memory:a1314000-a1317fff
*-multimedia
Beschreibung: Audio device
Produkt: Intel Corporation
Hersteller: Intel Corporation
Physische ID: e
Bus-Informationen: pci@0000:00:0e.0
Version: 03
Breite: 64 bits
Takt: 33MHz
Fähigkeiten: pm msi pciexpress bus_master cap_list
Konfiguration: driver=snd_hda_intel latency=0
Ressourcen: irq:136 memory:a1310000-a1313fff memory:a1000000-a10fffff
*-communication
Beschreibung: Communication controller
Produkt: Intel Corporation
Hersteller: Intel Corporation
Physische ID: f
Bus-Informationen: pci@0000:00:0f.0
Version: 03
Breite: 64 bits
Takt: 33MHz
Fähigkeiten: pm msi bus_master cap_list
Konfiguration: driver=mei_me latency=0
Ressourcen: irq:129 memory:a131f000-a131ffff
*-storage
Beschreibung: SATA controller
Produkt: Intel Corporation
Hersteller: Intel Corporation
Physische ID: 12
Bus-Informationen: pci@0000:00:12.0
Version: 03
Breite: 32 bits
Takt: 66MHz
Fähigkeiten: storage msi pm ahci_1.0 bus_master cap_list
Konfiguration: driver=ahci latency=0
Ressourcen: irq:125 memory:a1318000-a1319fff memory:a131e000-a131e0ff ioport:f090(Größe=8) ioport:f080(Größe=4) ioport:f060(Größe=32) memory:a131d000-a131d7ff
*-pci:0
Beschreibung: PCI bridge
Produkt: Intel Corporation
Hersteller: Intel Corporation
Physische ID: 13
Bus-Informationen: pci@0000:00:13.0
Version: f3
Breite: 32 bits
Takt: 33MHz
Fähigkeiten: pci pciexpress msi pm normal_decode bus_master cap_list
Konfiguration: driver=pcieport
Ressourcen: irq:122 memory:a1200000-a12fffff
*-generic
Beschreibung: Unassigned class
Produkt: RTS5229 PCI Express Card Reader
Hersteller: Realtek Semiconductor Co., Ltd.
Physische ID: 0
Bus-Informationen: pci@0000:01:00.0
Version: 01
Breite: 32 bits
Takt: 33MHz
Fähigkeiten: pm msi pciexpress bus_master cap_list
Konfiguration: driver=rtsx_pci latency=0
Ressourcen: irq:127 memory:a1200000-a1200fff
*-pci:1
Beschreibung: PCI bridge
Produkt: Intel Corporation
Hersteller: Intel Corporation
Physische ID: 13.2
Bus-Informationen: pci@0000:00:13.2
Version: f3
Breite: 32 bits
Takt: 33MHz
Fähigkeiten: pci pciexpress msi pm normal_decode bus_master cap_list
Konfiguration: driver=pcieport
Ressourcen: irq:123 ioport:e000(Größe=4096) memory:a1100000-a11fffff
*-network
Beschreibung: Ethernet interface
Produkt: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
Hersteller: Realtek Semiconductor Co., Ltd.
Physische ID: 0
Bus-Informationen: pci@0000:02:00.0
Logischer Name: eno1
Version: 15
Seriennummer: 94:c6:91:a0:60:bf
Größe: 1Gbit/s
Kapazität: 1Gbit/s
Breite: 64 bits
Takt: 33MHz
Fähigkeiten: pm msi pciexpress msix bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
Konfiguration: autonegotiation=on broadcast=yes driver=r8169 duplex=full firmware=rtl8168h-2_0.0.2 02/26/15 ip=192.168.2.112 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s
Ressourcen: irq:20 ioport:e000(Größe=256) memory:a1104000-a1104fff memory:a1100000-a1103fff
*-usb
Beschreibung: USB controller
Produkt: Intel Corporation
Hersteller: Intel Corporation
Physische ID: 15
Bus-Informationen: pci@0000:00:15.0
Version: 03
Breite: 64 bits
Takt: 33MHz
Fähigkeiten: pm msi xhci bus_master cap_list
Konfiguration: driver=xhci_hcd latency=0
Ressourcen: irq:124 memory:a1300000-a130ffff
*-usbhost:0
Produkt: xHCI Host Controller
Hersteller: Linux 5.3.0-46-generic xhci-hcd
Physische ID: 0
Bus-Informationen: usb@1
Logischer Name: usb1
Version: 5.03
Fähigkeiten: usb-2.00
Konfiguration: driver=hub slots=9 speed=480Mbit/s
*-usb:0
Beschreibung: Tastatur
Produkt: USB Receiver
Hersteller: Logitech
Physische ID: 1
Bus-Informationen: usb@1:1
Version: 24.07
Fähigkeiten: usb-2.00
Konfiguration: driver=usbhid maxpower=98mA speed=12Mbit/s
*-usb:1
Beschreibung: Massenspeichergerät
Produkt: SA-S10N BP08 0304170700
Hersteller: Initio
Physische ID: 3
Bus-Informationen: usb@1:3
Logischer Name: scsi2
Version: 3.00
Seriennummer: 0000000000000000
Fähigkeiten: usb-2.00 scsi emulated scsi-host
Konfiguration: driver=usb-storage maxpower=2mA speed=480Mbit/s
*-cdrom
Beschreibung: DVD writer
Produkt: DVDRW GSA-S10N
Hersteller: HL-DT-ST
Physische ID: 0.0.0
Bus-Informationen: scsi@2:0.0.0
Logischer Name: /dev/cdrom
Logischer Name: /dev/cdrw
Logischer Name: /dev/dvd
Logischer Name: /dev/dvdrw
Logischer Name: /dev/sr0
Version: BP08
Fähigkeiten: removable audio cd-r cd-rw dvd dvd-r
Konfiguration: status=open
*-usbhost:1
Produkt: xHCI Host Controller
Hersteller: Linux 5.3.0-46-generic xhci-hcd
Physische ID: 1
Bus-Informationen: usb@2
Logischer Name: usb2
Version: 5.03
Fähigkeiten: usb-3.00
Konfiguration: driver=hub slots=7 speed=5000Mbit/s
*-generic
Beschreibung: SD Host controller
Produkt: Intel Corporation
Hersteller: Intel Corporation
Physische ID: 1c
Bus-Informationen: pci@0000:00:1c.0
Version: 03
Breite: 64 bits
Takt: 33MHz
Fähigkeiten: pm bus_master cap_list
Konfiguration: driver=sdhci-pci latency=0
Ressourcen: irq:39 memory:a131c000-a131cfff memory:a131b000-a131bfff
*-isa
Beschreibung: ISA bridge
Produkt: Intel Corporation
Hersteller: Intel Corporation
Physische ID: 1f
Bus-Informationen: pci@0000:00:1f.0
Version: 03
Breite: 32 bits
Takt: 33MHz
Fähigkeiten: isa bus_master
Konfiguration: latency=0
*-serial UNGEFORDERT
Beschreibung: SMBus
Produkt: Intel Corporation
Hersteller: Intel Corporation
Physische ID: 1f.1
Bus-Informationen: pci@0000:00:1f.1
Version: 03
Breite: 64 bits
Takt: 33MHz
Konfiguration: latency=0
Ressourcen: memory:a131a000-a131a0ff ioport:f040(Größe=32)
*-scsi
Physische ID: 1
Logischer Name: scsi0
Fähigkeiten: emulated
*-disk
Beschreibung: ATA Disk
Produkt: CT1000MX500SSD1
Physische ID: 0.0.0
Bus-Informationen: scsi@0:0.0.0
Logischer Name: /dev/sda
Version: 023
Seriennummer: 1919E2010AA1
Größe: 931GiB (1TB)
Fähigkeiten: gpt-1.00 partitioned partitioned:gpt
Konfiguration: ansiversion=5 guid=7d39877c-0804-4c91-a82c-65bcc4767217 logicalsectorsize=512 sectorsize=4096
*-volume:0 UNGEFORDERT
Beschreibung: Windows FAT Laufwerk
Hersteller: mkfs.fat
Physische ID: 1
Bus-Informationen: scsi@0:0.0.0,1
Version: FAT32
Seriennummer: 7b1d-dad8
Größe: 510MiB
Kapazität: 511MiB
Fähigkeiten: boot fat initialized
Konfiguration: FATs=2 filesystem=fat name=EFI System Partition
*-volume:1
Beschreibung: EXT4-Laufwerk
Hersteller: Linux
Physische ID: 2
Bus-Informationen: scsi@0:0.0.0,2
Logischer Name: /dev/sda2
Logischer Name: /boot
Version: 1.0
Seriennummer: e83316f1-f040-4528-93ed-9527c041c7a6
Größe: 732MiB
Fähigkeiten: journaled extended_attributes large_files huge_files dir_nlink recover 64bit extents ext4 ext2 initialized
Konfiguration: created=2019-12-18 20:02:09 filesystem=ext4 lastmountpoint=/boot modified=2020-04-08 16:13:21 mount.fstype=ext4 mount.options=rw,relatime mounted=2020-04-08 16:13:21 state=mounted
*-volume:2
Beschreibung: EFI partition
Physische ID: 3
Bus-Informationen: scsi@0:0.0.0,3
Logischer Name: /dev/sda3
Seriennummer: e7749d34-8e29-4807-97b1-70bd8e510a39
Größe: 930GiB
Kapazität: 930GiB
Breite: 512 bits
Fähigkeiten: encrypted luks initialized
Konfiguration: bits=512 cipher=aes filesystem=luks hash=sha256 mode=xts-plain64 version=1
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Sieh mal -generic
Beschreibung: Unassigned class
Produkt: RTS5229 PCI Express Card Reader
Hersteller: Realtek Semiconductor Co., Ltd.
Physische ID: 0
Bus-Informationen: pci@0000:01:00.0
Version: 01
Breite: 32 bits
Takt: 33MHz
Fähigkeiten: pm msi pciexpress bus_master cap_list
Konfiguration: driver=rtsx_pci latency=0
Ressourcen: irq:127 memory:a1200000-a1200fff Nun bitte noch dmesg | grep firm ist Secureboot an?
|
Simion
(Themenstarter)
Anmeldungsdatum: 14. August 2018
Beiträge: 79
|
[ 2.690500] [drm] Finished loading DMC firmware i915/glk_dmc_ver1_04.bin (v1.4)
[ 45.087636] iwlwifi 0000:00:0c.0: loaded firmware version 46.6bf1df06.0 op_mode iwlmvm
[ 45.160566] iwlwifi 0000:00:0c.0: Allocated 0x00400000 bytes for firmware monitor.
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Installationsanleitung sudo apt-get install --reinstall linux-headers-$(uname -r) linux-headers-generic build-essential dkms patch
wget https://github.com/Zibri/Realtek-rts5229-linux-driver/archive/master.zip -P ~/Downloads
unzip ~/Downloads/master.zip -d ~/Downloads
sudo cp -Rp ~/Downloads/Realtek-rts5229-linux-driver-master /usr/src/rts5229-1.07
sudo dkms add -m rts5229 -v 1.07
sudo dkms build -m rts5229 -v 1.07
sudo dkms install -m rts5229 -v 1.07
sudo cp /usr/src/rts5229-1.07/blacklist-rts5229.conf /etc/modprobe.d/
sudo depmod -a
sudo update-initramfs -u Viel Erfolg.
|
Simion
(Themenstarter)
Anmeldungsdatum: 14. August 2018
Beiträge: 79
|
Hallo, danke für die Anleitung. Ich bin aktuell bei folgendem Schritt: sudo dkms build -m rts5229 -v 1.07 In der Konsole wird nun ein Dialog mit dem Titel "Configuring Secure Boot" angezeigt. Unten in diesem Dialog steht <OK>. Ich kann aber weder mit "Enter" oder durch klicken mit "OK" bestätigen. Was muss ich denn nun tun? Viele Grüße
|
Simion
(Themenstarter)
Anmeldungsdatum: 14. August 2018
Beiträge: 79
|
UEFI Secure Boot requires additional configuration to work with third-party drivers.
│
│ The system will assist you in configuring UEFI Secure Boot. To permit the use of
│ third-party drivers, a new Machine-Owner Key (MOK) has been generated. This key now
│ needs to be enrolled in your system's firmware.
│
│ To ensure that this change is being made by you as an authorized user, and not by an
│ attacker, you must choose a password now and then confirm the change after reboot using
│ the same password, in both the "Enroll MOK" and "Change Secure Boot state" menus that
│ will be presented to you when this system reboots.
│
│ If you proceed but do not confirm the password upon reboot, Ubuntu will still be able to
│ boot on your system but any hardware that requires third-party drivers to work correctly
│
│ <Ok>
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Darum fragte ich nach Secure Boot 😉 Der Treiber ist nicht Signiert,also musst du erst Secure Boot abschalten. Bei mir hier (ohne Secure Boot) vorher *-generic
Beschreibung: Unassigned class
Produkt: RTS5229 PCI Express Card Reader
Hersteller: Realtek Semiconductor Co., Ltd.
Physische ID: 0
Bus-Informationen: pci@0000:04:00.0
Version: 01
Breite: 32 bits
Takt: 33MHz
Fähigkeiten: pm msi pciexpress bus_master cap_list
Konfiguration: driver=rtsx_pci latency=0
Ressourcen: irq:37 memory:fe700000-fe700fff Funktion des Readers vorhanden.Nach der Installation *-generic
Beschreibung: Unassigned class
Produkt: RTS5229 PCI Express Card Reader
Hersteller: Realtek Semiconductor Co., Ltd.
Physische ID: 0
Bus-Informationen: pci@0000:04:00.0
Logischer Name: scsi2
Version: 01
Breite: 32 bits
Takt: 33MHz
Fähigkeiten: pm msi pciexpress bus_master cap_list emulated
Konfiguration: driver=rts5229 latency=0
Ressourcen: irq:43 memory:fe700000-fe700fff
Funktion ebenfalls vorhanden. Treiber Information stephan@stephan-Notebook-PC:~$ modinfo rts5229
filename: /lib/modules/5.4.0-21-generic/updates/dkms/rts5229.ko
version: v1.07
license: GPL
description: Realtek PCI-Express card reader driver
srcversion: 9F89C16FA08B704CE5C2B01
alias: pci:v000010ECd00005227sv*sd*bcFFsc*i*
alias: pci:v000010ECd00005229sv*sd*bcFFsc*i*
depends:
retpoline: Y
name: rts5229
vermagic: 5.4.0-21-generic SMP mod_unload
parm: delay_use:seconds to delay before using a new device (uint)
parm: ss_en:enable selective suspend (int)
parm: ss_interval:Interval to enter ss state in seconds (int)
parm: auto_delink_en:enable auto delink (int)
parm: aspm_l0s_l1_en:enable device aspm (byte)
parm: msi_en:enable msi (int)
stephan@stephan-Notebook-PC:~$ Hoffe ich konnte dir damit etwas an Informationen geben ☺
|
Simion
(Themenstarter)
Anmeldungsdatum: 14. August 2018
Beiträge: 79
|
Hallo, ich habe es nach deiner Anleitung nun hinbekommen und kann auf die Speicherkarte zugreifen. Vielen Dank für die Zeit, die du dir genommen hast. Viele Grüße
|