Hallo zusammen,
ich habe mir am Wochenende einen neuen, selbst montierten PC gegönnt, und diesen mit Ubuntu 20.04 DT installiert. Nach mehr als 30 Jahren mein erster PC mit AMD Prozessor (Ryzen 5/3600). Das Mainboard ist ein ASRock B450 Steel Legend (32 GB. RAM), die Grafik AMD RX570.
Ebenfalls neu für mich sind M.2 SSD. Ich nutze 2 davon. Für das System eine schnelle Samsung SSD 970 EVO Plus 250GB (nvme, PCIE), für /home eine WDC Blue WDS500G2B0B (M.2 als SATA). Zusätzlich eine herkömmliche SSD ATA OCZ-AGILITY3 (SATA) als 2. Datenplatte.
sudo parted -l Modell: ATA OCZ-AGILITY3 (scsi) Festplatte /dev/sda: 240GB Sektorgröße (logisch/physisch): 512B/512B Partitionstabelle: gpt Disk-Flags: Nummer Anfang Ende Größe Dateisystem Name Flags 1 1049kB 240GB 240GB ext4 Modell: ATA WDC WDS500G2B0B (scsi) Festplatte /dev/sdb: 500GB Sektorgröße (logisch/physisch): 512B/512B Partitionstabelle: gpt Disk-Flags: Nummer Anfang Ende Größe Dateisystem Name Flags 1 1049kB 500GB 500GB ext4 Modell: Samsung SSD 970 EVO Plus 250GB (nvme) Festplatte /dev/nvme0n1: 250GB Sektorgröße (logisch/physisch): 512B/512B Partitionstabelle: gpt Disk-Flags: Nummer Anfang Ende Größe Dateisystem Name Flags 1 1049kB 1024MB 1023MB fat32 boot, esp 2 1024MB 39,9GB 38,9GB linux-swap(v1) swap 3 39,9GB 250GB 210GB ext4 cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/nvme0n1p3 during installation UUID=0ab977a3-4e36-43fa-a5e2-8dd398e6dc7d / ext4 errors=remount-ro 0 1 # /boot/efi was on /dev/nvme0n1p1 during installation UUID=A165-B825 /boot/efi vfat umask=0077 0 1 # /home was on /dev/sdb1 during installation UUID=d07f384c-e314-42b1-b5ec-c7b9709e91ba /home ext4 defaults 0 2 # swap was on /dev/nvme0n1p2 during installation UUID=1c6a0da9-8fbc-4c8a-83ca-f3bbfbdf9e47 none swap sw 0 0 # Addtl. Data Disk OCZ 240 GB. UUID=84ae4167-6e41-4aa0-8d06-f1cdecb42d88 /media/ocz240 ext4 defaults,x-gvfs-show,rw 0 2 # add OMV-shares for automount //192.168.178.200/Archive /home/thomas/Archive cifs noauto,vers=1.0,credentials=/home/thomas/.smbcredentials,iocharset=utf8,gid=1000,uid=1000,users,sec=ntlm 0 0 //192.168.178.200/Videostore /home/thomas/Videostore cifs noauto,vers=1.0,credentials=/home/thomas/.smbcredentials,iocharset=utf8,gid=1000,uid=1000,users,sec=ntlm 0 0 //192.168.178.200/Mud /home/thomas/Mud cifs noauto,vers=1.0,credentials=/home/thomas/.smbcredentials,iocharset=utf8,gid=1000,uid=1000,users,sec=ntlm 0 0
Das System scheint zu laufen. Es findet jedoch bei jedem Boot eine File System Check (ca. 5-10 s) statt, der nach meinem Wissen nur alle n-Boots statt finden sollte. Dies macht mich nervös. Es könnte eine Neuerung bei 20.04 sein (und deshalb völlig normal), oder es könnte auf ein Problem hinweisen.
Kann mir dazu jemand etwas sagen?