Hallo,
ich habe eine Externe Festplatte auf die ich beim anstecken nicht zugreifen kann. Es sind keine wichtigen Daten drauf, ich würde die Festplatte allerdings gerne zum Daten speichern nutzen, weiß aber nicht ob sie nun defekt ist oder das Problem ein anderes ist.
sudo smartctl -A /dev/sdb smartctl 7.0 2018-12-30 r4883 [x86_64-linux-5.3.0-51-generic] (local build) Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 192 192 051 Pre-fail Always - 1743 3 Spin_Up_Time 0x0027 164 155 021 Pre-fail Always - 2791 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 766 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 447 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 719 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 373 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 1778 194 Temperature_Celsius 0x0022 120 101 000 Old_age Always - 27 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
sudo smartctl -i /dev/sdb smartctl 7.0 2018-12-30 r4883 [x86_64-linux-5.3.0-51-generic] (local build) Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Elements / My Passport (USB) Device Model: WDC WD5000BMVW-11AMCS2 Serial Number: WD-WXD1E71MCZR7 LU WWN Device Id: 5 0014ee 6ac80649a Firmware Version: 01.01A01 User Capacity: 500.107.862.016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sun May 24 16:02:57 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled
dmesg [ 3477.620222] usb 2-2: new high-speed USB device number 5 using ehci-pci [ 3477.650304] usb 2-2: New USB device found, idVendor=1058, idProduct=0740, bcdDevice=10.03 [ 3477.650310] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 3477.650313] usb 2-2: Product: My Passport 0740 [ 3477.650317] usb 2-2: Manufacturer: Western Digital [ 3477.650320] usb 2-2: SerialNumber: 575844314537314D435A5237 [ 3477.690640] usb-storage 2-2:1.0: USB Mass Storage device detected [ 3477.694067] scsi host5: usb-storage 2-2:1.0 [ 3477.694244] usbcore: registered new interface driver usb-storage [ 3477.700110] usbcore: registered new interface driver uas [ 3478.696870] scsi 5:0:0:0: Direct-Access WD My Passport 0740 1003 PQ: 0 ANSI: 6 [ 3478.697332] scsi 5:0:0:1: Enclosure WD SES Device 1003 PQ: 0 ANSI: 6 [ 3478.705273] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 3478.708927] sd 5:0:0:0: [sdb] Spinning up disk... [ 3478.709058] scsi 5:0:0:1: Attached scsi generic sg3 type 13 [ 3483.015768] scsi 5:0:0:1: Wrong diagnostic page; asked for 1 got 8 [ 3483.015776] scsi 5:0:0:1: Failed to get diagnostic page 0x1 [ 3483.015782] scsi 5:0:0:1: Failed to bind enclosure -19 [ 3484.040264] .ready [ 3484.041296] sd 5:0:0:0: [sdb] 976707584 512-byte logical blocks: (500 GB/466 GiB) [ 3484.042386] sd 5:0:0:0: [sdb] Write Protect is off [ 3484.042393] sd 5:0:0:0: [sdb] Mode Sense: 47 00 10 08 [ 3484.046009] sd 5:0:0:0: [sdb] No Caching mode page found [ 3484.046020] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 3484.060185] sdb: sdb1 [ 3484.067018] sd 5:0:0:0: [sdb] Attached SCSI disk [ 3484.067370] ses 5:0:0:1: Attached Enclosure device [ 3486.774773] sd 5:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3486.774776] sd 5:0:0:0: [sdb] tag#0 Sense Key : Medium Error [current] [ 3486.774779] sd 5:0:0:0: [sdb] tag#0 Add. Sense: Unrecovered read error [ 3486.774783] sd 5:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 08 00 00 00 08 00 [ 3486.774787] blk_update_request: critical medium error, dev sdb, sector 2048 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Als Laie klingt es für mich als wäre die Platte defekt, oder?
Moderiert von sebix:
Thema in einen passenden Forenbereich verschoben..