Alfons317
Anmeldungsdatum: 4. Juni 2020
Beiträge: 37
|
Hallo. Ich habe mir einen HP LaserJet Pro MFP M28a zugelegt, den ich gern zum Laufen kriegen will. Zunächst habe ich wie auf HPLIP beschrieben das Paket hplip-gui nachinstalliert. Das Gerät wurde jedoch nicht gefunden. Ich habe dann festgestellt, dass hplip über die Paketverwaltung nur Version 3.17.10 ist, was für dieses Gerät nicht ausreicht. Darum habe ich die installierte Version entfernt, hplip-3.20.5.run von der Website geladen (https://developers.hp.com/hp-linux-imaging-and-printing/gethplip) und bin den Schritten gefolgt. Es fragt zwar nach, ob Dependencies installiert werden sollen, ist dazu aber nicht in der Lage. Ich habe das nach und nach manuell gemacht. Nun werden jedoch fehlende Dependencies angezeigt, die aber installiert sind.
(base) user@machine:~$ sudo apt-get install python3-pyqt4 python3-pyqt5
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
python3-pyqt4 ist schon die neueste Version (4.12.1+dfsg-2).
python3-pyqt5 ist schon die neueste Version (5.10.1+dfsg-1ubuntu2).
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
Log ist im Anhang. Den Weg der manuellen Installation (https://developers.hp.com/hp-linux-imaging-and-printing/install/manual/distros/ubuntu) habe ich auch einmal probiert. Das .configure scheint aber nicht zu klappen. Es wird keine make file erzeugt. Was kann ich tun?
- hplip_Log (7.8 KiB)
- Download hplip_Log
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Willkommen im Forum 😉 Zeige doch mal folgende Terminal Ausgaben dpkg -l | egrep 'ippusbxd|libusb-0.1-4|system-config-printer-udev' dpkg -l | egrep HP hp-check -r damit man sich erst mal einen kleinen Überblick verschaffen kann.
|
Alfons317
(Themenstarter)
Anmeldungsdatum: 4. Juni 2020
Beiträge: 37
|
Hi. Hier die Ausgabe: (base) user@machine:~$ dpkg -l | egrep 'ippusbxd|libusb-0.1-4|system-config-printer-udev'
ii ippusbxd 1.32-2 amd64 Daemon for IPP USB printer support
ii libusb-0.1-4:amd64 2:0.1.12-31 amd64 userspace USB programming library
ii system-config-printer-udev 1.5.11-1ubuntu2 amd64 Utilities to detect and configure printers automatically
(base) user@machine:~$ dpkg -l | egrep HP
rc hplip 3.17.10+repack0-5 amd64 HP Linux Printing and Imaging System (HPLIP)
rc hplip-gui 3.17.10+repack0-5 all HP Linux Printing and Imaging - GUI utilities (Qt-based)
ii libhpmud0:amd64 3.17.10+repack0-5 amd64 HP Multi-Point Transport Driver (hpmud) run-time libraries
rc libsane-hpaio:amd64 3.17.10+repack0-5 amd64 HP SANE backend for multi-function peripherals
ii printer-driver-hpcups 3.17.10+repack0-5 amd64 HP Linux Printing and Imaging - CUPS Raster driver (hpcups)
ii printer-driver-pnm2ppa 1.13+nondbs-0ubuntu6 amd64 printer driver for HP-GDI printers
ii printer-driver-pxljr 1.4+repack0-5 amd64 printer driver for HP Color LaserJet 35xx/36xx
(base) user@machine:~$ hp-check -r
Der Befehl 'hp-check' wurde nicht gefunden, kann aber installiert werden mit:
sudo apt install hplip
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Das Paket sollte Weg sudo apt purge ippusbxd dann hast du nicht alles von der alten Hplip entfernt ii libhpmud0:amd64 3.17.10+repack0-5 amd64 HP Multi-Point Transport Driver (hpmud) run-time libraries
ii printer-driver-hpcups 3.17.10+repack0-5 amd64 HP Linux Printing and Imaging - CUPS Raster driver (hpcups) das also nachholen.Dann die Installation wieder probieren. Bei Problemen zeige die gesamte Ausgabe.
|
Alfons317
(Themenstarter)
Anmeldungsdatum: 4. Juni 2020
Beiträge: 37
|
Ich habe die drei genannten Pakete entfernt. Hier noch einmal die entsprechenden Ausgaben danach:
(base) user@machine:~$ dpkg -l | egrep 'ippusbxd|libusb-0.1-4|system-config-printer-udev'
ii libusb-0.1-4:amd64 2:0.1.12-31 amd64 userspace USB programming library
ii system-config-printer-udev 1.5.11-1ubuntu2 amd64 Utilities to detect and configure printers automatically
(base) user@machine:~$ dpkg -l | egrep HP
rc hplip 3.17.10+repack0-5 amd64 HP Linux Printing and Imaging System (HPLIP)
rc hplip-gui 3.17.10+repack0-5 all HP Linux Printing and Imaging - GUI utilities (Qt-based)
rc libsane-hpaio:amd64 3.17.10+repack0-5 amd64 HP SANE backend for multi-function peripherals
ii printer-driver-pnm2ppa 1.13+nondbs-0ubuntu6 amd64 printer driver for HP-GDI printers
ii printer-driver-pxljr 1.4+repack0-5 amd64 printer driver for HP Color LaserJet 35xx/36xx
Danach habe ich die Installation erneut ausgeführt. Es gab dort aber keine Veränderung, d.h. es wird immer noch eine fehlende Dependency bemängelt, obwohl das Paket installiert ist.
(base) user@machine:~/Downloads/hplib-install$ sh hplip-3.20.5.run
Creating directory hplip-3.20.5
Verifying archive integrity... All good.
Uncompressing HPLIP 3.20.5 Self Extracting Archive....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
HP Linux Imaging and Printing System (ver. 3.20.5)
HPLIP Installer ver. 5.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Installer log saved in: hplip-install_Fri-05-Jun-2020_00:20:43.log
\
note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.
error: debian-buster/sid version is not supported, so all dependencies may not be installed. However trying to install using debian-10.3 version packages.
Press 'y' to continue auto installation. Press 'n' to quit auto instalation(y=yes, n=no*): y
INSTALLATION MODE
-----------------
Automatic mode will install the full HPLIP solution with the most common options.
Custom mode allows you to choose installation options to fit specific requirements.
Please choose the installation mode (a=automatic*, c=custom, q=quit) : a
INTRODUCTION
------------
This installer will install HPLIP version 3.20.5 on your computer.
Please close any running package management systems now (YaST, Adept, Synaptic, Up2date, etc).
DISTRO/OS CONFIRMATION
----------------------
Distro appears to be Debian buster/sid.
Is "Debian buster/sid" your correct distro/OS and version (y=yes*, n=no, q=quit) ? n
DISTRO/OS SELECTION
-------------------
Choose the name of the distro/OS that most closely matches your system:
Num. Distro/OS Name
---- ------------------------
0 Mepis
1 Debian
2 SUSE Linux
3 Mandriva Linux
4 Fedora
5 Red Hat
6 Red Hat Enterprise Linux
7 Ubuntu
8 PCLinuxOS
9 IGOS
10 Linux Mint
11 Linpus Linux
12 gOS
13 Boss
14 Linux From Scratch
15 Manjaro Linux
Enter number 0...15 (q=quit) ?7
Choose the version of "Ubuntu" that most closely matches your system:
Num. Distro/OS Version
---- ----------------------------------------
0 Unknown or not listed
1 10.04 ("Lucid", Released 2010)
2 11.10 ("Oneiric", Released 13/10/2011)
3 12.04 ("Precise", Released 28/04/2012)
4 12.10 ("Quantal", Released 18/10/2012)
5 13.04 ("Raring", Released 25/04/2013)
6 13.10 ("Saucy", Released 17/10/2013)
7 14.04 ("Trusty", Released 17/04/2014)
8 14.10 ("Utopic", Released 23/10/2014)
9 15.04 ("Vivid", Released 17/04/2015)
10 15.10 ("Willy", Released 22/10/2015)
11 16.04 ("Xenial", Released 17/04/2016)
12 16.10 ("Yakkety", Released 13/10/2016)
13 17.04 ("Zesty", Released 31/05/2017)
14 17.10 ("Artful Aardvark", Released
19/10/2017)
15 18.04 ("Bionic Beaver", Released
5/04/2018)
16 18.10 ("Cosmic Cuttlefish", Released
18/10/2018)
17 19.04 ("Cosmic Cuttlefish", Released
18/10/2018)
18 19.10 ("Eoan Ermine", Released
26/10/2019)
19 20.04 ("Cosmic Cuttlefish", Released
18/10/2018)
Enter number 0...19 (q=quit) ?15
Distro set to: Ubuntu 18.04
Initializing. Please wait...
ENTER ROOT/SUPERUSER PASSWORD
-----------------------------
Please enter the root/superuser password:
SECURITY PACKAGES
-----------------
AppArmor is installed.
AppArmor protects the application from external intrusion attempts making the application secure
Would you like to have this installer install the hplip specific policy/profile (y=yes*, n=no, q=quit) ? y
RUNNING PRE-INSTALL COMMANDS
----------------------------
OK
MISSING DEPENDENCIES
--------------------
Following dependencies are not installed. HPLIP will not work if all REQUIRED dependencies are not installed and some of the HPLIP features will not work if OPTIONAL dependencies are not installed.
Package-Name Component Required/Optional
dbus fax REQUIRED
python3-notify2 gui_qt5 OPTIONAL
python3-pyqt4-dbus gui_qt4 OPTIONAL
python3-pyqt4 gui_qt4 REQUIRED
python3-pyqt5-dbus gui_qt5 OPTIONAL
python3-pyqt5 gui_qt5 REQUIRED
python3-dbus fax REQUIRED
python3-reportlab fax OPTIONAL
Do you want to install these missing dependencies (y=yes*, n=no, q=quit) ? y
INSTALL MISSING REQUIRED DEPENDENCIES
-------------------------------------
note: Installation of dependencies requires an active internet connection.
warning: Missing REQUIRED dependency: python3-pyqt4 (PyQt 4- Qt interface for Python (for Qt version 4.x))
warning: This installer cannot install 'python3-pyqt4' for your distro/OS and/or version.
error: Installation cannot continue without this dependency. Please manually install this dependency and re-run this installer.
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Versuche sudo apt install python3-qtpy python3-dev python3-pil danach nochmal testen.
|
Alfons317
(Themenstarter)
Anmeldungsdatum: 4. Juni 2020
Beiträge: 37
|
Habe ich installiert. Das Ausführen von
sh hplip-3.20.5.run
führt weiterhin zum gleichen Output. Die angezeigten fehlenden Dependencies sind gleichgeblieben.
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Ok,dann wird es mit der Version 3.20.5 nichts.Du brauchst auch nur die Version min 3.18.4.Also Versuchen wir mal cd ~/Downloads
wget https://sourceforge.net/projects/hplip/files/hplip/3.18.5/hplip-3.18.5.run
sh hplip-3.18.5.run
|
Alfons317
(Themenstarter)
Anmeldungsdatum: 4. Juni 2020
Beiträge: 37
|
Hierfür scheinen auf dem System erwartete Dateien zu fehlen. Muss ich da vorher noch etwas anderes installieren?
(base) user@machine:~/Downloads$ sh hplip-3.18.5.run
Creating directory hplip-3.18.5
Verifying archive integrity... All good.
Uncompressing HPLIP 3.18.5 Self Extracting Archive.............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
HP Linux Imaging and Printing System (ver. 3.18.5)
HPLIP Installer ver. 5.1
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Installer log saved in: hplip-install_Fri-05-Jun-2020_14:38:17.log
\
note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.
|Traceback (most recent call last):
File "/home/user/Downloads/hplip-3.18.5/base/utils.py", line 266, in walkFiles
names = os.listdir(root)
FileNotFoundError: [Errno 2] No such file or directory: '/etc/PolicyKit'
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/home/user/Downloads/hplip-3.18.5/base/utils.py", line 268, in walkFiles
raise StopIteration
StopIteration
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "./install.py", line 241, in <module>
text_install.start(language, auto, test_depends, test_unknown, assume_network, max_retries, enable, disable)
File "/home/user/Downloads/hplip-3.18.5/installer/text_install.py", line 86, in start
core.init()
File "/home/user/Downloads/hplip-3.18.5/installer/core_install.py", line 500, in init
self.check_dependencies(callback)
File "/home/user/Downloads/hplip-3.18.5/installer/core_install.py", line 593, in check_dependencies
self.have_dependencies[d] = self.dependencies[d][3]()
File "/home/user/Downloads/hplip-3.18.5/installer/core_install.py", line 1164, in check_policykit
if check_file('PolicyKit.conf', "/etc/PolicyKit") and check_file('org.gnome.PolicyKit.AuthorizationManager.service', "/usr/share/dbus-1/services"):
File "/home/user/Downloads/hplip-3.18.5/installer/dcheck.py", line 108, in check_file
for w in utils.walkFiles(dir, recurse=True, abs_paths=True, return_folders=False, pattern=f):
RuntimeError: generator raised StopIteration Die andere im Traceback erwähnte Datei
/usr/share/dbus-1/services/org.gnome.PolicyKit.AuthorizationManager.service
ist ebenfalls nicht vorhanden.
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Ist das ein "Normales" Ubuntu welches du da hast?Zeige mal dpkg -l policykit*
|
Alfons317
(Themenstarter)
Anmeldungsdatum: 4. Juni 2020
Beiträge: 37
|
Ob es "normal" ist, kann ich leider nicht beurteilen, weil ich mich dafür zu wenig auskenne. Es handelt sich un ein Notebook von TUXEDO Computers mit vorkonfiguriertem OS. Dass es da irgendwelche Besonderheiten gibt, kann ich also nicht ausschließen. Hier der Output:
(base) user@machine:~$ dpkg -l policykit*
Gewünscht=Unbekannt/Installieren/R=Entfernen/P=Vollständig Löschen/Halten
| Status=Nicht/Installiert/Config/U=Entpackt/halb konFiguriert/
Halb installiert/Trigger erWartet/Trigger anhängig
|/ Fehler?=(kein)/R=Neuinstallation notwendig (Status, Fehler: GROSS=schlecht)
||/ Name Version Architektur Beschreibung
+++-===============================================-============================-============================-===================================================================================================
ii policykit-1 0.105-20ubuntu0.18.04.5 amd64 framework for managing administrative policies and privileges
ii policykit-1-gnome 0.105-6ubuntu2 amd64 authentication agent for PolicyKit
ii policykit-desktop-privileges 0.20ubuntu18.04.1 all run common desktop actions without password
Es gibt übrigens einen Ordner der so ähnlich heißt wie der fehlende, nämlich
/etc/polkit-1
Das ist der Inhalt:
(base) user@machine:/etc/polkit-1$ sudo ls -R
.:
localauthority localauthority.conf.d nullbackend.conf.d
./localauthority:
10-vendor.d 20-org.d 30-site.d 50-local.d 90-mandatory.d
./localauthority/10-vendor.d:
./localauthority/20-org.d:
./localauthority/30-site.d:
./localauthority/50-local.d:
./localauthority/90-mandatory.d:
./localauthority.conf.d:
50-localauthority.conf 51-ubuntu-admin.conf
./nullbackend.conf.d:
50-nullbackend.conf
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Irgendwie gefällt mir das nicht!Das ist schon sehr merkwürdig!Ich bastel mal was zusammen ......
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Zeige mal cd ~/Downloads/hplip-3.18.5
sudo apt install --reinstall libjpeg-dev libcups2-dev libusb-1.0-0-dev python-dev
./configure --disable-network-build --disable-gui-build --disable-fax-build --disable-hpijs-install Gute Nacht.
|
Alfons317
(Themenstarter)
Anmeldungsdatum: 4. Juni 2020
Beiträge: 37
|
Installation:
(base) user@machine:~/Downloads/hplip-3.18.5$ sudo apt install --reinstall libjpeg-dev libcups2-dev libusb-1.0-0-dev python-dev
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Die folgenden zusätzlichen Pakete werden installiert:
libpython-dev libpython2-dev libpython2.7-dev python2-dev python2.7-dev
Die folgenden NEUEN Pakete werden installiert:
libpython-dev libpython2-dev libpython2.7-dev python-dev python2-dev python2.7-dev
0 aktualisiert, 6 neu installiert, 3 erneut installiert, 0 zu entfernen und 0 nicht aktualisiert.
Es müssen noch 28,6 MB von 28,9 MB an Archiven heruntergeladen werden.
Nach dieser Operation werden 42,0 MB Plattenplatz zusätzlich benutzt.
Möchten Sie fortfahren? [J/n] j
Holen:1 http://mirrors.tuxedocomputers.com/ubuntu/mirror/archive.ubuntu.com/ubuntu bionic/main amd64 libjpeg-dev amd64 8c-2ubuntu8 [1.546 B]
Holen:2 http://oibaf.tuxedocomputers.com/ubuntu bionic/main amd64 libpython2-dev amd64 2.7.15-3~oibaf~b [20,9 kB]
Holen:3 http://mirrors.tuxedocomputers.com/ubuntu/mirror/security.ubuntu.com/ubuntu bionic-security/main amd64 libpython2.7-dev amd64 2.7.17-1~18.04ubuntu1 [28,3 MB]
Holen:4 http://oibaf.tuxedocomputers.com/ubuntu bionic/main amd64 libpython-dev amd64 2.7.15-3~oibaf~b [20,9 kB]
Holen:5 http://oibaf.tuxedocomputers.com/ubuntu bionic/main amd64 python2-dev amd64 2.7.15-3~oibaf~b [1.200 B]
Holen:6 http://oibaf.tuxedocomputers.com/ubuntu bionic/main amd64 python-dev amd64 2.7.15-3~oibaf~b [1.176 B]
Holen:7 http://mirrors.tuxedocomputers.com/ubuntu/mirror/security.ubuntu.com/ubuntu bionic-security/main amd64 python2.7-dev amd64 2.7.17-1~18.04ubuntu1 [279 kB]
Es wurden 28,6 MB in 3 s geholt (9.004 kB/s).
(Lese Datenbank ... 291176 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von .../0-libcups2-dev_2.2.7-1ubuntu2.8_amd64.deb ...
Entpacken von libcups2-dev:amd64 (2.2.7-1ubuntu2.8) über (2.2.7-1ubuntu2.8) ...
Vorbereitung zum Entpacken von .../1-libjpeg-dev_8c-2ubuntu8_amd64.deb ...
Entpacken von libjpeg-dev:amd64 (8c-2ubuntu8) über (8c-2ubuntu8) ...
Vormals nicht ausgewähltes Paket libpython2.7-dev:amd64 wird gewählt.
Vorbereitung zum Entpacken von .../2-libpython2.7-dev_2.7.17-1~18.04ubuntu1_amd64.deb ...
Entpacken von libpython2.7-dev:amd64 (2.7.17-1~18.04ubuntu1) ...
Vormals nicht ausgewähltes Paket libpython2-dev:amd64 wird gewählt.
Vorbereitung zum Entpacken von .../3-libpython2-dev_2.7.15-3~oibaf~b_amd64.deb ...
Entpacken von libpython2-dev:amd64 (2.7.15-3~oibaf~b) ...
Vormals nicht ausgewähltes Paket libpython-dev:amd64 wird gewählt.
Vorbereitung zum Entpacken von .../4-libpython-dev_2.7.15-3~oibaf~b_amd64.deb ...
Entpacken von libpython-dev:amd64 (2.7.15-3~oibaf~b) ...
Vorbereitung zum Entpacken von .../5-libusb-1.0-0-dev_2%3a1.0.21-2_amd64.deb ...
Entpacken von libusb-1.0-0-dev:amd64 (2:1.0.21-2) über (2:1.0.21-2) ...
Vormals nicht ausgewähltes Paket python2.7-dev wird gewählt.
Vorbereitung zum Entpacken von .../6-python2.7-dev_2.7.17-1~18.04ubuntu1_amd64.deb ...
Entpacken von python2.7-dev (2.7.17-1~18.04ubuntu1) ...
Vormals nicht ausgewähltes Paket python2-dev wird gewählt.
Vorbereitung zum Entpacken von .../7-python2-dev_2.7.15-3~oibaf~b_amd64.deb ...
Entpacken von python2-dev (2.7.15-3~oibaf~b) ...
Vormals nicht ausgewähltes Paket python-dev wird gewählt.
Vorbereitung zum Entpacken von .../8-python-dev_2.7.15-3~oibaf~b_amd64.deb ...
Entpacken von python-dev (2.7.15-3~oibaf~b) ...
libcups2-dev:amd64 (2.2.7-1ubuntu2.8) wird eingerichtet ...
libjpeg-dev:amd64 (8c-2ubuntu8) wird eingerichtet ...
libusb-1.0-0-dev:amd64 (2:1.0.21-2) wird eingerichtet ...
libpython2.7-dev:amd64 (2.7.17-1~18.04ubuntu1) wird eingerichtet ...
python2.7-dev (2.7.17-1~18.04ubuntu1) wird eingerichtet ...
libpython2-dev:amd64 (2.7.15-3~oibaf~b) wird eingerichtet ...
python2-dev (2.7.15-3~oibaf~b) wird eingerichtet ...
libpython-dev:amd64 (2.7.15-3~oibaf~b) wird eingerichtet ...
python-dev (2.7.15-3~oibaf~b) wird eingerichtet ...
Trigger für man-db (2.8.3-2ubuntu0.1) werden verarbeitet ...
Das configure sagt dann zwischendurch "too many arguments" und endet schließlich mit einem Fehler:
(base) user@machine:~/Downloads/hplip-3.18.5$ ./configure --disable-network-build --disable-gui-build --disable-fax-build --disable-hpijs-install
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for pthread_create in -lpthread... yes
checking for pow in -lm... yes
checking for jpeg_set_defaults in -ljpeg... yes
checking for dlopen in -ldl... yes
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking jpeglib.h usability... yes
checking jpeglib.h presence... yes
checking for jpeglib.h... yes
checking whether byte ordering is bigendian... no
checking for uint32_t... yes
checking "for platform-dependencies"... "using Default platform.h"
checking for documentation build... yes
checking for hpijs only build... no
checking for lite build... no
checking for hpcups only build... no
checking for hpijs install... no
checking for hpcups install... yes
checking for new hpcups install... no
checking for hpps install... yes
checking for network build... no
checking for parallel port build... no
checking for class driver... no
ppdc: Warning - overlapping filename "ppd/hpcups/hp-photosmart_7150.ppd".
ppdc: Warning - overlapping filename "ppd/hpcups/hp-photosmart_7200_series.ppd".
ppdc: Warning - overlapping filename "ppd/hpcups/hp-photosmart_7350.ppd".
ppdc: Warning - overlapping filename "ppd/hpcups/hp-business_inkjet_1000.ppd".
ppdc: Warning - overlapping filename "ppd/hpijs/hp-photosmart_7150-hpijs.ppd".
ppdc: Warning - overlapping filename "ppd/hpijs/hp-photosmart_7200_series-hpijs.ppd".
ppdc: Warning - overlapping filename "ppd/hpijs/hp-photosmart_7350-hpijs.ppd".
ppdc: Warning - overlapping filename "ppd/hpijs/hp-business_inkjet_1000-hpijs.ppd".
ppdc: Warning - overlapping filename "ppd/hpijs/hp-color_laserjet_3500-hpijs.ppd".
ppdc: Warning - overlapping filename "ppd/hpijs/hp-color_laserjet_3500n-hpijs.ppd".
ppdc: Warning - overlapping filename "ppd/hpijs/hp-color_laserjet_3550-hpijs.ppd".
ppdc: Warning - overlapping filename "ppd/hpijs/hp-color_laserjet_3550n-hpijs.ppd".
ppdc: Warning - overlapping filename "ppd/hpijs/hp-color_laserjet_3600-hpijs.ppd".
./configure: line 16070: test: too many arguments
checking for scanner build... yes
checking for gui build... no
checking for fax build... no
checking for apparmor profile... no
checking for dbus build... yes
checking for cups 1.1.x build... no
checking for udev sysfs enable rules... no
checking for shadow build... no
checking for libusb-0.1 build... no
checking for foomatic ppd install... no
checking for foomatic drv install... no
checking for cups drv install... yes
checking for cups ppd install... no
checking for foomatic-rip-hplip install... no
checking for qt5... no
checking for qt4... yes
checking for qt3... no
checking for policykit... no
checking for host machine platform... x86_64
checking for cupsDoFileRequest in -lcups... yes
checking cups/cups.h usability... yes
checking cups/cups.h presence... yes
checking for cups/cups.h... yes
checking for libusb_init in -lusb-1.0... yes
checking libusb-1.0/libusb.h usability... yes
checking libusb-1.0/libusb.h presence... yes
checking for libusb-1.0/libusb.h... yes
checking for a Python interpreter with version >= 2.2... python
checking for python... /home/user/anaconda3/bin/python
checking for python version... 3.7
checking for python platform... linux
checking for python script directory... ${prefix}/lib/python3.7/site-packages
checking for python extension module directory... ${exec_prefix}/lib/python3.7/site-packages
checking for path to Python.h... "using /home/user/anaconda3/include/python3.7m .... python3.7/Python.h"
checking python3.7/Python.h usability... no
checking python3.7/Python.h presence... no
checking for python3.7/Python.h... no
checking python3.7mu/Python.h usability... no
checking python3.7mu/Python.h presence... no
checking for python3.7mu/Python.h... no
checking python3.7m/Python.h usability... no
checking python3.7m/Python.h presence... no
checking for python3.7m/Python.h... no
configure: error: cannot find python-devel support
Nachtrag: Ich habe gerade gesehen, dass der Ordner anaconda3 dem User root gehört und nicht mir. Könnte das ein Problem sein oder ist das normal/egal?
(base) user@machine:~/Downloads/hplip-3.18.5$ ls -ldh ~/anaconda3/
drwxr-xr-x 26 root root 4,0K Feb 29 09:30 /home/user/anaconda3/
(base) user@machine:~/Downloads/hplip-3.18.5$ ls -ldh ~/.conda/
drwxr-xr-x 2 root root 4,0K Feb 29 09:30 /home/user/.conda/
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Zeige mal ls -lrth /usr/bin/python*
|