alterpinguin schrieb:
Auf jeden Fall testen ob Du aus dem schwarzen Bildschirm nicht auf eine Konsole kommst (zum Login dort) per strg+alt+F1 oder F2 für die zweite ..
Schrieb ich ja im ersten Post, das funktioniert. Wenn ich beispielsweise via STRG+Alt+F1 auf tty1 wechsle, dann kann ich von dort aus via startx die grafische Oberfläche starten.
Wenn ich jetzt die tty's durchschalte, dann verhalten sich tty 1-6 wie Terminals, also man sieht halt Text und kann Befehle eingeben, aber keine grafische Oberfläsche. Bei tty7 wird der Bildschirm wieder schwarz und bei Nr. 8 blinkt lediglich ein Coursur, aber sonst ist da nix.
Das gab dmesg aus:
dmesg
[ 0.000000] Linux version 4.15.0-99-generic (buildd@lgw01-amd64-016) (gcc ver sion 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #100-Ubuntu SMP Wed Apr 22 20:32:47 UT C 2020 (Ubuntu 4.15.0-99.100-generic 4.15.18)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] Disabled fast string operations
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003bdeffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003bdf0000-0x000000003bdf9fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003bdfa000-0x000000003bdfffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003be00000-0x000000003fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: Acer, inc. TravelMate 2310 /Lugano , BIOS 3A14 09/1 3/05
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x3bdf0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03BE00000 mask FFFE00000 uncachable
[ 0.000000] 2 base 03C000000 mask FFC000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: PAT not supported by CPU.
[ 0.000000] total RAM covered: 958M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 3 lose cov er RAM: 0G
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.000000] found SMP MP-table at [mem 0x000f8180-0x000f818f]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x0e3fffff]
[ 0.000000] BRK [0x0df7d000, 0x0df7dfff] PGTABLE
[ 0.000000] BRK [0x0df7e000, 0x0df7efff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x33ab7000-0x35d52fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F8150 000014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 0x000000003BDF64B8 000030 (v01 PTLTD RSDT 0604000 0 LTP 00000000)
[ 0.000000] ACPI: FACP 0x000000003BDF9F3C 000074 (v01 SiS 661MX 0604000 0 PTL 00000001)
[ 0.000000] ACPI: DSDT 0x000000003BDF66E3 003859 (v01 PTLTD 661MX 0604000 0 MSFT 0100000E)
[ 0.000000] ACPI: FACS 0x000000003BDFAFC0 000040
[ 0.000000] ACPI: APIC 0x000000003BDF9FB0 000050 (v01 PTLTD ? APIC 0604000 0 LTP 00000000)
[ 0.000000] ACPI: SSDT 0x000000003BDF64E8 0001FB (v01 PmRef CpuPm 0000300 0 INTL 20030224)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 71MB HIGHMEM available.
[ 0.000000] 885MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 375fe000
[ 0.000000] low ram: 0 - 375fe000
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] BRK [0x0df7f000, 0x0df7ffff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000375fdfff]
[ 0.000000] HighMem [mem 0x00000000375fe000-0x000000003bdeffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000003bdeffff]
[ 0.000000] Reserved but unavailable: 98 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003bdeffff]
[ 0.000000] On node 0 totalpages: 245134
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 2175 pages used for memmap
[ 0.000000] Normal zone: 222718 pages, LIFO batch:31
[ 0.000000] HighMem zone: 18418 pages, LIFO batch:3
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[ 0.000000] e820: [mem 0x40000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffff ffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x81/0x433 with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_id s:1
[ 0.000000] percpu: Embedded 29 pages/cpu s89036 r0 d29748 u118784
[ 0.000000] pcpu-alloc: s89036 r0 d29748 u118784 alloc=29*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 242919
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-99-generic r oot=UUID=78845645-1765-49e1-aedc-995af61a1938 ro noplymouth
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000375fe:0003bdf0)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 852048K/980536K available (8961K kernel code, 894K rwdata , 3452K rodata, 1104K init, 848K bss, 128488K reserved, 0K cma-reserved, 73672K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
cpu_entry : 0xffa00000 - 0xffb39000 (1252 kB)
pkmap : 0xff600000 - 0xff800000 (2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xcdd19000 - 0xcde2d000 (1104 kB)
.data : 0xcd8c0670 - 0xcdd05a80 (4373 kB)
.text : 0xcd000000 - 0xcd8c0670 (8961 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 38064 entries in 75 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS: 2304, nr_irqs: 256, preallocated irqs: 16
[ 0.000000] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.020000] tsc: Fast TSC calibration using PIT
[ 0.024000] tsc: Detected 1399.990 MHz processor
[ 0.024000] Calibrating delay loop (skipped), value calculated using timer fr equency.. 2799.98 BogoMIPS (lpj=5599960)
[ 0.024000] pid_max: default: 32768 minimum: 301
[ 0.024000] Security Framework initialized
[ 0.024000] Yama: becoming mindful.
[ 0.024000] AppArmor: AppArmor initialized
[ 0.024000] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.024000] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.024000] Disabled fast string operations
[ 0.024000] CPU0: Thermal monitoring enabled (TM1)
[ 0.024000] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[ 0.024000] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
[ 0.024000] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user poin ter sanitization
[ 0.024000] Spectre V2 : Mitigation: Full generic retpoline
[ 0.024000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on c ontext switch
[ 0.024000] Speculative Store Bypass: Vulnerable
[ 0.024000] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.045752] Freeing SMP alternatives memory: 36K
[ 0.056065] APIC calibration not consistent with PM-Timer: 0ms instead of 100 ms
[ 0.056085] APIC delta adjusted to PM-Timer: 623333 (303)
[ 0.056107] smpboot: CPU0: Intel(R) Celeron(R) M processor 1.40GHz (f amily: 0x6, model: 0xd, stepping: 0x8)
[ 0.056316] Performance Events: p6 PMU driver.
[ 0.056333] ... version: 0
[ 0.056339] ... bit width: 32
[ 0.056344] ... generic registers: 2
[ 0.056350] ... value mask: 00000000ffffffff
[ 0.056356] ... max period: 000000007fffffff
[ 0.056362] ... fixed-purpose events: 0
[ 0.056367] ... event mask: 0000000000000003
[ 0.056468] Hierarchical SRCU implementation.
[ 0.058395] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.058447] smp: Bringing up secondary CPUs ...
[ 0.058455] smp: Brought up 1 node, 1 CPU
[ 0.058461] smpboot: Max logical packages: 1
[ 0.058468] smpboot: Total of 1 processors activated (2799.98 BogoMIPS)
[ 0.059965] allocated 1048576 bytes of page_ext
[ 0.060413] devtmpfs: initialized
[ 0.061006] evm: security.selinux
[ 0.061015] evm: security.SMACK64
[ 0.061020] evm: security.SMACK64EXEC
[ 0.061026] evm: security.SMACK64TRANSMUTE
[ 0.061031] evm: security.SMACK64MMAP
[ 0.061036] evm: security.apparmor
[ 0.061041] evm: security.ima
[ 0.061046] evm: security.capability
[ 0.061290] PM: Registering ACPI NVS region [mem 0x3bdfa000-0x3bdfffff] (2457 6 bytes)
[ 0.061496] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 7645041785100000 ns
[ 0.061516] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.061669] pinctrl core: initialized pinctrl subsystem
[ 0.061928] RTC time: 12:13:50, date: 06/07/20
[ 0.062165] NET: Registered protocol family 16
[ 0.062467] audit: initializing netlink subsys (disabled)
[ 0.062847] EISA bus registered
[ 0.062856] cpuidle: using governor ladder
[ 0.062863] cpuidle: using governor menu
[ 0.063009] ACPI: bus type PCI registered
[ 0.063018] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.066973] PCI: PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.066985] PCI: PCI BIOS revision 2.10 entry at 0xfd786, last bus=1
[ 0.066992] PCI: Using configuration type 1 for base access
[ 0.070656] audit: type=2000 audit(1591532029.060:1): state=initialized audit _enabled=0 res=1
[ 0.070907] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.071546] ACPI: Added _OSI(Module Device)
[ 0.071559] ACPI: Added _OSI(Processor Device)
[ 0.071565] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.071572] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.071579] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.071586] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.071594] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.073668] ACPI Exception: Could not find/resolve named package element: Z00 4 (20170831/dspkginit-381)
[ 0.073685] ACPI Exception: Could not find/resolve named package element: Z00 4 (20170831/dspkginit-381)
[ 0.074681] ACPI: EC: EC started
[ 0.074689] ACPI: EC: interrupt blocked
[ 0.102243] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.102253] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x19, EC_CMD/EC_SC=0x66, EC_DATA= 0x62
[ 0.102265] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transa ctions
[ 0.102273] ACPI: Interpreter enabled
[ 0.102325] ACPI: (supports S0 S3 S4 S5)
[ 0.102332] ACPI: Using IOAPIC for interrupt routing
[ 0.102394] PCI: Ignoring host bridge windows from ACPI; if necessary, use "p ci=use_crs" and report a bug
[ 0.102713] ACPI: Enabled 11 GPEs in block 00 to 0F
[ 0.110317] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.110339] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.110355] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.110368] acpi PNP0A03:00: fail to add MMCONFIG information, can't access e xtended PCI configuration space under this bridge.
[ 0.111020] acpi PNP0A03:00: host bridge window [io 0x0cf8-0x0cff] (ignored)
[ 0.111024] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (i gnored)
[ 0.111027] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff window] (i gnored)
[ 0.111030] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff wi ndow] (ignored)
[ 0.111033] acpi PNP0A03:00: host bridge window [mem 0x3c000000-0xffedffff wi ndow] (ignored)
[ 0.111036] acpi PNP0A03:00: host bridge window [mem 0x000c4000-0x000c7fff wi ndow] (ignored)
[ 0.111039] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff wi ndow] (ignored)
[ 0.111042] acpi PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff wi ndow] (ignored)
[ 0.111044] acpi PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff wi ndow] (ignored)
[ 0.111046] PCI: root bus 00: using default resources
[ 0.111328] PCI host bridge to bus 0000:00
[ 0.111338] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.111347] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.111357] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.111383] pci 0000:00:00.0: [1039:0661] type 00 class 0x060000
[ 0.111405] pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xe1ffffff]
[ 0.111613] pci 0000:00:01.0: [1039:0003] type 01 class 0x060400
[ 0.111796] pci 0000:00:02.0: [1039:0008] type 00 class 0x060100
[ 0.111887] pci 0000:00:02.0: Enabling SiS 96x SMBus
[ 0.112057] pci 0000:00:02.1: [1039:0016] type 00 class 0x0c0500
[ 0.112118] pci 0000:00:02.1: reg 0x20: [io 0x8100-0x811f]
[ 0.112274] pci 0000:00:02.5: [1039:5513] type 00 class 0x01018a
[ 0.112297] pci 0000:00:02.5: reg 0x10: [io 0x01f0-0x01f7]
[ 0.112309] pci 0000:00:02.5: reg 0x14: [io 0x03f4-0x03f7]
[ 0.112321] pci 0000:00:02.5: reg 0x18: [io 0x0170-0x0177]
[ 0.112332] pci 0000:00:02.5: reg 0x1c: [io 0x0374-0x0377]
[ 0.112344] pci 0000:00:02.5: reg 0x20: [io 0x1000-0x100f]
[ 0.112369] pci 0000:00:02.5: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.112378] pci 0000:00:02.5: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.112386] pci 0000:00:02.5: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.112394] pci 0000:00:02.5: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.112540] pci 0000:00:02.6: [1039:7013] type 00 class 0x070300
[ 0.112564] pci 0000:00:02.6: reg 0x10: [io 0x1400-0x14ff]
[ 0.112573] pci 0000:00:02.6: reg 0x14: [io 0x1080-0x10ff]
[ 0.112646] pci 0000:00:02.6: supports D1 D2
[ 0.112649] pci 0000:00:02.6: PME# supported from D3hot D3cold
[ 0.112801] pci 0000:00:02.7: [1039:7012] type 00 class 0x040100
[ 0.112827] pci 0000:00:02.7: reg 0x10: [io 0x1c00-0x1cff]
[ 0.112839] pci 0000:00:02.7: reg 0x14: [io 0x1800-0x187f]
[ 0.112924] pci 0000:00:02.7: supports D1 D2
[ 0.112927] pci 0000:00:02.7: PME# supported from D3hot D3cold
[ 0.113056] pci 0000:00:03.0: [1039:7001] type 00 class 0x0c0310
[ 0.113079] pci 0000:00:03.0: reg 0x10: [mem 0xe2000000-0xe2000fff]
[ 0.113285] pci 0000:00:03.1: [1039:7001] type 00 class 0x0c0310
[ 0.113308] pci 0000:00:03.1: reg 0x10: [mem 0xe2001000-0xe2001fff]
[ 0.113518] pci 0000:00:03.3: [1039:7002] type 00 class 0x0c0320
[ 0.113544] pci 0000:00:03.3: reg 0x10: [mem 0xe2002000-0xe2002fff]
[ 0.113634] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[ 0.113786] pci 0000:00:04.0: [1039:0900] type 00 class 0x020000
[ 0.113812] pci 0000:00:04.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.113825] pci 0000:00:04.0: reg 0x14: [mem 0xe2003000-0xe2003fff]
[ 0.113874] pci 0000:00:04.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.113913] pci 0000:00:04.0: supports D1 D2
[ 0.113915] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.114065] pci 0000:00:06.0: [104c:ac50] type 02 class 0x060700
[ 0.114090] pci 0000:00:06.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.114129] pci 0000:00:06.0: supports D1 D2
[ 0.114132] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.114355] pci 0000:01:00.0: [1039:6330] type 00 class 0x030000
[ 0.114377] pci 0000:01:00.0: reg 0x10: [mem 0xe8000000-0xefffffff pref]
[ 0.114387] pci 0000:01:00.0: reg 0x14: [mem 0xe2100000-0xe211ffff]
[ 0.114396] pci 0000:01:00.0: reg 0x18: [io 0x9000-0x907f]
[ 0.114462] pci 0000:01:00.0: supports D1 D2
[ 0.114563] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.114575] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.114581] pci 0000:00:01.0: bridge window [mem 0xe2100000-0xe21fffff]
[ 0.114586] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xefffffff pref ]
[ 0.114594] pci 0000:00:06.0: bridge configuration invalid ([bus 00-00]), rec onfiguring
[ 0.114672] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 05
[ 0.114678] pci_bus 0000:00: on NUMA node 0
[ 0.115217] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11)
[ 0.115347] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11) *0, disabl ed.
[ 0.115476] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11) *0, disabl ed.
[ 0.115603] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11)
[ 0.115754] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11)
[ 0.115879] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11)
[ 0.116029] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabl ed.
[ 0.116157] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11)
[ 0.116622] ACPI: EC: interrupt unblocked
[ 0.116638] ACPI: EC: event unblocked
[ 0.116650] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x19, EC_CMD/EC_SC=0x66, EC_DATA= 0x62
[ 0.116661] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transa ctions and events
[ 0.117334] SCSI subsystem initialized
[ 0.117455] libata version 3.00 loaded.
[ 0.117556] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.117567] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=i o+mem,locks=none
[ 0.117577] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.117584] vgaarb: loaded
[ 0.117634] ACPI: bus type USB registered
[ 0.117678] usbcore: registered new interface driver usbfs
[ 0.117709] usbcore: registered new interface driver hub
[ 0.117741] usbcore: registered new device driver usb
[ 0.117885] EDAC MC: Ver: 3.0.0
[ 0.118212] PCI: Using ACPI for IRQ routing
[ 0.118223] PCI: pci_cache_line_size set to 64 bytes
[ 0.118278] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.118282] e820: reserve RAM buffer [mem 0x3bdf0000-0x3bffffff]
[ 0.118535] NetLabel: Initializing
[ 0.118542] NetLabel: domain hash size = 128
[ 0.118548] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.118595] NetLabel: unlabeled traffic allowed by default
[ 0.121693] clocksource: Switched to clocksource refined-jiffies
[ 0.161567] VFS: Disk quotas dquot_6.6.0
[ 0.161651] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.161978] AppArmor: AppArmor Filesystem Enabled
[ 0.162102] pnp: PnP ACPI init
[ 0.162423] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.162642] system 00:01: [io 0x8000-0x807f] has been reserved
[ 0.162656] system 00:01: [io 0x8080-0x80ff] has been reserved
[ 0.162665] system 00:01: [io 0x8100-0x811f] has been reserved
[ 0.162674] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.162683] system 00:01: [io 0xfe00] has been reserved
[ 0.162692] system 00:01: [io 0x03f0-0x03f1] has been reserved
[ 0.162703] system 00:01: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.162713] system 00:01: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.162722] system 00:01: [mem 0xffc00000-0xffc00fff] has been reserved
[ 0.162731] system 00:01: [mem 0xffe00000-0xffe00fff] has been reserved
[ 0.162741] system 00:01: [mem 0xffe80000-0xffefffff] has been reserved
[ 0.162750] system 00:01: [mem 0x000d0000-0x000d7fff] could not be reserved
[ 0.162766] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.162868] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.162926] pnp 00:03: Plug and Play ACPI device, IDs SYN1003 SYN1000 SYN0002 PNP0f13 (active)
[ 0.163271] pnp: PnP ACPI: found 4 devices
[ 0.163283] PnPBIOS: Disabled
[ 0.201815] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_id le_ns: 2085701024 ns
[ 0.201855] clocksource: Switched to clocksource acpi_pm
[ 0.201920] pci 0000:00:06.0: BAR 0: assigned [mem 0x40000000-0x40000fff]
[ 0.201935] pci 0000:00:06.0: BAR 15: assigned [mem 0x44000000-0x47ffffff pre f]
[ 0.201947] pci 0000:00:06.0: BAR 16: assigned [mem 0x48000000-0x4bffffff]
[ 0.201957] pci 0000:00:04.0: BAR 6: assigned [mem 0x40020000-0x4003ffff pref ]
[ 0.201972] pci 0000:00:06.0: BAR 13: assigned [io 0x2400-0x24ff]
[ 0.201984] pci 0000:00:06.0: BAR 14: assigned [io 0x2800-0x28ff]
[ 0.201998] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.202008] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.202020] pci 0000:00:01.0: bridge window [mem 0xe2100000-0xe21fffff]
[ 0.202030] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xefffffff pref ]
[ 0.202047] pci 0000:00:06.0: CardBus bridge to [bus 02-05]
[ 0.202055] pci 0000:00:06.0: bridge window [io 0x2400-0x24ff]
[ 0.202065] pci 0000:00:06.0: bridge window [io 0x2800-0x28ff]
[ 0.202076] pci 0000:00:06.0: bridge window [mem 0x44000000-0x47ffffff pref ]
[ 0.202088] pci 0000:00:06.0: bridge window [mem 0x48000000-0x4bffffff]
[ 0.202100] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.202104] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.202107] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
[ 0.202110] pci_bus 0000:01: resource 1 [mem 0xe2100000-0xe21fffff]
[ 0.202113] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xefffffff pref]
[ 0.202116] pci_bus 0000:02: resource 0 [io 0x2400-0x24ff]
[ 0.202119] pci_bus 0000:02: resource 1 [io 0x2800-0x28ff]
[ 0.202122] pci_bus 0000:02: resource 2 [mem 0x44000000-0x47ffffff pref]
[ 0.202125] pci_bus 0000:02: resource 3 [mem 0x48000000-0x4bffffff]
[ 0.202287] NET: Registered protocol family 2
[ 0.202744] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.202794] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.202874] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.202988] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.203014] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.203113] NET: Registered protocol family 1
[ 0.748561] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c00 00-0x000dffff]
[ 0.748576] PCI: CLS 0 bytes, default 64
[ 0.748704] Unpacking initramfs...
[ 2.036653] Freeing initrd memory: 35440K
[ 2.036880] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.036896] software IO TLB: mapped [mem 0x2fab7000-0x33ab7000] (64MB)
[ 2.037252] Scanning for low memory corruption every 60 seconds
[ 2.038738] Initialise system trusted keyrings
[ 2.038775] Key type blacklist registered
[ 2.038910] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 2.042526] zbud: loaded
[ 2.043480] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.043870] fuse init (API version 7.26)
[ 2.046888] Key type asymmetric registered
[ 2.046904] Asymmetric key parser 'x509' registered
[ 2.046940] bounce: pool size: 64 pages
[ 2.046983] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 47)
[ 2.047076] io scheduler noop registered
[ 2.047084] io scheduler deadline registered
[ 2.047229] io scheduler cfq registered (default)
[ 2.047730] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 2.047741] vesafb: scrolling: redraw
[ 2.047748] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.047793] vesafb: framebuffer at 0xe8000000, mapped to 0x(ptrval), using 12 16k, total 1216k
[ 2.106812] Console: switching to colour frame buffer device 80x30
[ 2.167309] fb0: VESA VGA frame buffer device
[ 2.168591] intel_idle: does not run on family 6 model 13
[ 2.169648] ACPI: AC Adapter [ACAD] (on-line)
[ 2.171012] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/ input/input0
[ 2.173460] ACPI: Lid Switch [LID]
[ 2.211158] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:0 0/input/input1
[ 2.288997] ACPI: Power Button [PWRB]
[ 2.327544] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:0 0/input/input2
[ 2.405743] ACPI: Sleep Button [SLPB]
[ 2.445106] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/inp ut3
[ 2.524686] ACPI: Power Button [PWRF]
[ 2.564307] tsc: Marking TSC unstable due to TSC halts in idle
[ 2.607394] (NULL device *): hwmon_device_register() is deprecated. Please co nvert the driver to use hwmon_device_register_with_info().
[ 2.691140] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.733430] ACPI: Thermal Zone [THRM] (34 C)
[ 2.775228] ACPI: Battery Slot [BAT1] (battery absent)
[ 2.816681] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.858729] isapnp: Scanning for PnP cards...
[ 2.911117] serial 0000:00:02.6: enabling device (0000 -> 0001)
[ 3.041647] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x142e16e5 a67, max_idle_ns: 440795217764 ns
[ 3.130028] Linux agpgart interface v0.103
[ 3.221348] loop: module loaded
[ 3.308746] pata_sis 0000:00:02.5: version 0.5.2
[ 3.309006] pata_sis 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller
[ 3.397753] scsi host0: pata_sis
[ 3.484606] scsi host1: pata_sis
[ 3.570183] isapnp: No Plug & Play device found
[ 3.612758] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1000 irq 14
[ 3.655699] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1008 irq 15
[ 3.697412] libphy: Fixed MDIO Bus: probed
[ 3.738656] tun: Universal TUN/TAP device driver, 1.6
[ 3.779661] PPP generic driver version 2.4.2
[ 3.819722] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.861063] ehci-pci: EHCI PCI platform driver
[ 3.901718] ata1.00: ATA-6: HTS424040M9AT00, MA2OA71A, max UDMA/100
[ 3.941995] ata1.00: 78140160 sectors, multi 16: LBA48
[ 3.982549] ehci-pci 0000:00:03.3: EHCI Host Controller
[ 4.022352] ehci-pci 0000:00:03.3: new USB bus registered, assigned bus numbe r 1
[ 4.100474] ehci-pci 0000:00:03.3: cache line size of 64 is not supported
[ 4.100506] ehci-pci 0000:00:03.3: irq 23, io mem 0xe2002000
[ 4.141011] ata1.00: configured for UDMA/100
[ 4.180380] ehci-pci 0000:00:03.3: USB 2.0 started, EHCI 1.00
[ 4.219848] scsi 0:0:0:0: Direct-Access ATA HTS424040M9AT00 A71A PQ : 0 ANSI: 5
[ 4.297504] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.337904] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 4.416384] usb usb1: Product: EHCI Host Controller
[ 4.455927] usb usb1: Manufacturer: Linux 4.15.0-99-generic ehci_hcd
[ 4.495444] usb usb1: SerialNumber: 0000:00:03.3
[ 4.534117] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.3 GiB)
[ 4.612363] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.652256] sd 0:0:0:0: [sda] Write Protect is off
[ 4.691107] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.691153] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, does n't support DPO or FUA
[ 4.771885] hub 1-0:1.0: USB hub found
[ 4.811568] hub 1-0:1.0: 6 ports detected
[ 4.851603] sda: sda1 sda2 < sda5 > sda3
[ 4.891721] ata2.00: ATAPI: PIONEER DVD-RW DVR-K15RA, 1.04, max UDMA/33
[ 4.932636] ehci-platform: EHCI generic platform driver
[ 4.974145] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.014222] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.055304] ata2.00: configured for UDMA/33
[ 5.095145] ohci-pci: OHCI PCI platform driver
[ 5.135154] ohci-pci 0000:00:03.0: OHCI PCI host controller
[ 5.174941] ohci-pci 0000:00:03.0: new USB bus registered, assigned bus numbe r 2
[ 5.253659] ohci-pci 0000:00:03.0: irq 20, io mem 0xe2000000
[ 5.293496] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-K15RA 1.04 PQ : 0 ANSI: 5
[ 5.373337] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.414010] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 5.492867] usb usb2: Product: OHCI PCI host controller
[ 5.532881] usb usb2: Manufacturer: Linux 4.15.0-99-generic ohci_hcd
[ 5.572719] usb usb2: SerialNumber: 0000:00:03.0
[ 5.612682] hub 2-0:1.0: USB hub found
[ 5.651573] hub 2-0:1.0: 3 ports detected
[ 5.689919] usb 1-4: new high-speed USB device number 2 using ehci-pci
[ 5.729135] ohci-pci 0000:00:03.1: OHCI PCI host controller
[ 5.767378] ohci-pci 0000:00:03.1: new USB bus registered, assigned bus numbe r 3
[ 5.844195] ohci-pci 0000:00:03.1: irq 21, io mem 0xe2001000
[ 5.914570] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 5.992463] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.035092] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.077215] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 6.159075] usb usb3: Product: OHCI PCI host controller
[ 6.200452] usb usb3: Manufacturer: Linux 4.15.0-99-generic ohci_hcd
[ 6.241968] usb usb3: SerialNumber: 0000:00:03.1
[ 6.282800] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 6.282914] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.324136] hub 3-0:1.0: USB hub found
[ 6.365035] hub 3-0:1.0: 3 ports detected
[ 6.405708] ohci-platform: OHCI generic platform driver
[ 6.447018] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.487732] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x 64 irq 1,12
[ 6.568116] usb 1-4: New USB device found, idVendor=0bda, idProduct=8172
[ 6.609186] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.650275] usb 1-4: Product: RTL8191S WLAN Adapter
[ 6.690539] usb 1-4: Manufacturer: Manufacturer Realtek
[ 6.730649] usb 1-4: SerialNumber: 00e04c000001
[ 6.786398] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 6.826471] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 6.865750] mousedev: PS/2 mouse device common for all mice
[ 6.905800] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 6.945561] rtc_cmos 00:00: alarms up to one year, y3k, 114 bytes nvram
[ 6.985065] i2c /dev entries driver
[ 7.024090] device-mapper: uevent: version 1.0.3
[ 7.062688] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-d evel@redhat.com
[ 7.139573] platform eisa.0: Probing EISA bus 0
[ 7.177668] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 7.216037] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 7.253378] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 7.289359] platform eisa.0: EISA: Detected 0 cards
[ 7.324316] input: AT Translated Set 2 keyboard as /devices/platform/i8042/se rio0/input/input4
[ 7.395412] cpufreq_nforce2: No nForce2 chipset
[ 7.431641] ledtrig-cpu: registered to indicate activity on CPUs
[ 7.468974] NET: Registered protocol family 10
[ 7.516894] Segment Routing with IPv6
[ 7.553591] NET: Registered protocol family 17
[ 7.590191] Key type dns_resolver registered
[ 7.626569] mce: Using 5 MCE banks
[ 7.661745] microcode: sig=0x6d8, pf=0x20, revision=0x20
[ 7.696836] microcode: Microcode Update Driver: v2.2.
[ 7.696846] Using IPI No-Shortcut mode
[ 7.764831] registered taskstats version 1
[ 7.797955] Loading compiled-in X.509 certificates
[ 7.844501] Loaded X.509 cert 'Build time autogenerated kernel key: 64aab9bda b133035be86989a77e896dc08274184'
[ 7.913789] zswap: loaded using pool lzo/zbud
[ 7.960131] Key type big_key registered
[ 7.995511] Key type trusted registered
[ 8.034929] Key type encrypted registered
[ 8.068862] AppArmor: AppArmor sha1 policy hashing enabled
[ 8.103029] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 8.137828] ima: Allocated hash algorithm: sha1
[ 8.172123] evm: HMAC attrs: 0x1
[ 8.205299] Magic number: 8:963:227
[ 8.238070] acpi PNP0200:00: hash matches
[ 8.270676] rtc_cmos 00:00: setting system clock to 2020-06-07 12:13:58 UTC ( 1591532038)
[ 8.340199] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 8.376655] EDD information not available.
[ 8.415813] Freeing unused kernel image memory: 1104K
[ 8.456139] Write protecting the kernel text: 8964k
[ 8.491115] Write protecting the kernel read-only data: 3476k
[ 8.525520] NX-protecting the kernel data: 7420k
[ 8.559745] x86/mm: PCI BIOS W+X mapping 96 pages
[ 8.594028] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 8.629066] x86/mm: Checking user space page tables
[ 8.663810] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 9.279414] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100
[ 9.454586] sis900.c: v1.08.10 Apr. 2 2006
[ 9.527316] random: fast init done
[ 9.563519] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 9.600576] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 9.643454] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 13 .
[ 9.719878] 0000:00:04.0: Using transceiver found at address 13 as default
[ 9.759318] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 9.908941] eth0: SiS 900 PCI Fast Ethernet at 0x(ptrval), IRQ 19, 00:c0:9f:b 5:f4:d5
[ 9.989025] sis900 0000:00:04.0 enp0s4: renamed from eth0
[ 10.436100] psmouse serio1: synaptics: Touchpad model: 1, fw: 5.9, id: 0x126e b1, caps: 0xa04713/0x4000/0x0/0x0, board id: 0, fw id: 13800
[ 10.554391] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/seri o1/input/input6
[ 11.598295] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 12.520340] random: crng init done
[ 12.524297] random: 7 urandom warning(s) missed due to ratelimiting
[ 14.698904] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.985553] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SEL INUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL + XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybr id)
[ 15.164623] systemd[1]: Detected architecture x86.
[ 15.430564] systemd[1]: Set hostname to <TravelMate-2310>.
[ 20.268619] systemd[1]: Created slice User and Session Slice.
[ 20.353227] systemd[1]: Started Forward Password Requests to Wall Directory W atch.
[ 20.478240] systemd[1]: Created slice System Slice.
[ 20.563140] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 20.648364] systemd[1]: Reached target Slices.
[ 20.731724] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 20.816838] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 20.903771] systemd[1]: Listening on Journal Audit Socket.
[ 20.993121] systemd[1]: Listening on udev Control Socket.
[ 21.084201] systemd[1]: Listening on Syslog Socket.
[ 22.367219] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 26.175641] systemd[1]: Started Journal Service.
[ 29.096755] systemd-journald[236]: Received request to flush runtime journal from PID 1
[ 52.412625] RPC: Registered named UNIX socket transport module.
[ 52.480475] RPC: Registered udp transport module.
[ 52.515569] RPC: Registered tcp transport module.
[ 52.549437] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 52.645818] lp: driver loaded but no devices found
[ 52.739599] ppdev: user-space parallel port driver
[ 54.851754] agpgart-sis 0000:00:00.0: SiS chipset [1039/0661]
[ 54.932191] agpgart-sis 0000:00:00.0: AGP aperture is 32M @ 0xe0000000
[ 54.932310] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 55.926344] yenta_cardbus 0000:00:06.0: enabling device (0000 -> 0003)
[ 55.926527] yenta_cardbus 0000:00:06.0: CardBus bridge found [1025:0082]
[ 55.926547] yenta_cardbus 0000:00:06.0: Using CSCINT to route CSC interrupts to PCI
[ 55.926549] yenta_cardbus 0000:00:06.0: Routing CardBus interrupts to PCI
[ 55.926554] yenta_cardbus 0000:00:06.0: TI: mfunc 0x00521d22, devctl 0x64
[ 56.079367] r8712u: module is from the staging directory, the quality is unkn own, you have been warned.
[ 56.149461] r8712u: register rtl8712_netdev_ops to netdev_ops
[ 56.149469] usb 1-4: r8712u: USB_SPEED_HIGH with 4 endpoints
[ 56.172482] yenta_cardbus 0000:00:06.0: ISA IRQ mask 0x06f8, PCI irq 19
[ 56.172486] yenta_cardbus 0000:00:06.0: Socket status: 30000006
[ 56.177311] usb 1-4: r8712u: Boot from EFUSE: Autoload OK
[ 56.943532] usb 1-4: r8712u: CustomerID = 0x000a
[ 56.943541] usb 1-4: r8712u: MAC Address from efuse = 00:87:34:93:04:14
[ 56.943545] usb 1-4: r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
[ 56.943810] usbcore: registered new interface driver r8712u
[ 57.229020] snd_intel8x0 0000:00:02.7: intel8x0_measure_ac97_clock: measured 204098 usecs (9803 samples)
[ 57.229028] snd_intel8x0 0000:00:02.7: clocking to 48000
[ 57.474701] audit: type=1400 audit(1591532087.699:2): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-se ssion" pid=429 comm="apparmor_parser"
[ 57.474710] audit: type=1400 audit(1591532087.699:3): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-se ssion//chromium" pid=429 comm="apparmor_parser"
[ 57.502662] audit: type=1400 audit(1591532087.727:4): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="/sbin/dhclient" pid=430 comm="app armor_parser"
[ 57.502674] audit: type=1400 audit(1591532087.727:5): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-c lient.action" pid=430 comm="apparmor_parser"
[ 57.502679] audit: type=1400 audit(1591532087.727:6): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-h elper" pid=430 comm="apparmor_parser"
[ 57.502683] audit: type=1400 audit(1591532087.727:7): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient -script" pid=430 comm="apparmor_parser"
[ 57.635409] audit: type=1400 audit(1591532087.859:8): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="/usr/bin/evince" pid=431 comm="ap parmor_parser"
[ 57.635418] audit: type=1400 audit(1591532087.859:9): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper " pid=431 comm="apparmor_parser"
[ 57.635423] audit: type=1400 audit(1591532087.859:10): apparmor="STATUS" oper ation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=4 31 comm="apparmor_parser"
[ 57.635428] audit: type=1400 audit(1591532087.859:11): apparmor="STATUS" oper ation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanit ized_helper" pid=431 comm="apparmor_parser"
[ 57.956405] r8712u 1-4:1.0 wlx008734930414: renamed from wlan0
[ 58.805281] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[ 58.806313] excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[ 58.807083] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[ 58.807450] excluding 0x3f0-0x3f7 0x480-0x48f 0x4d0-0x4d7
[ 58.807810] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[ 58.808437] clean
[ 58.808480] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[ 58.809134] clean
[ 58.809175] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 58.809186] excluding 0xc0000-0xd7fff 0xdc000-0xfffff
[ 58.809232] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0fff fff:
[ 58.809259] clean
[ 58.809293] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60fff fff:
[ 58.809318] clean
[ 58.809352] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[ 58.810026] clean
[ 62.978596] Adding 979964k swap on /dev/sda5. Priority:-2 extents:1 across:9 79964k FS
[ 65.775333] FS-Cache: Loaded
[ 65.856187] FS-Cache: Netfs 'cifs' registered for caching
[ 65.856406] Key type cifs.spnego registered
[ 65.856418] Key type cifs.idmap registered
[ 65.857151] No dialect specified on mount. Default has changed to a more secu re dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secur e SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) speci fy vers=1.0 on mount.
[ 65.886751] CIFS VFS: Error connecting to socket. Aborting operation.
[ 65.918801] CIFS VFS: cifs_mount failed w/return code = -101
[ 70.895407] IPv6: ADDRCONF(NETDEV_UP): enp0s4: link is not ready
[ 70.896526] enp0s4: Media Link Off
[ 70.897581] IPv6: ADDRCONF(NETDEV_UP): enp0s4: link is not ready
[ 70.984323] cfg80211: Loading compiled-in X.509 certificates for regulatory d atabase
[ 71.010308] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 71.042894] IPv6: ADDRCONF(NETDEV_UP): wlx008734930414: link is not ready
[ 71.804547] r8712u 1-4:1.0 wlx008734930414: 1 RCR=0x153f00e
[ 71.805279] r8712u 1-4:1.0 wlx008734930414: 2 RCR=0x553f00e
[ 73.316720] IPv6: ADDRCONF(NETDEV_UP): wlx008734930414: link is not ready
[ 73.646990] IPv6: ADDRCONF(NETDEV_UP): wlx008734930414: link is not ready
[ 84.053111] No dialect specified on mount. Default has changed to a more secu re dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secur e SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) speci fy vers=1.0 on mount.
[ 84.053166] CIFS VFS: Error connecting to socket. Aborting operation.
[ 84.053170] CIFS VFS: cifs_mount failed w/return code = -101
[ 1295.406298] perf: interrupt took too long (2506 > 2500), lowering kernel.perf _event_max_sample_rate to 79750
[ 1306.087694] IPv6: ADDRCONF(NETDEV_CHANGE): wlx008734930414: link becomes read y
Die /var/log/Xorg.0.log ist ja riesig (über 1600 Zeilen) Lässt die sich via Batch irgendwie nach brauchbaren Aussagen filtern?