Wenns denn hilft. Man sieht, dass die Karte 5.1 kann (sind a auch 6 Ausgänge dran ☺)
$ aplay -L
default
Playback/recording through the PulseAudio sound server
surround21
2.1 Surround output to Front and Subwoofer speakers
surround40
4.0 Surround output to Front and Rear speakers
surround41
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50
5.0 Surround output to Front, Center and Rear speakers
surround51
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
null
Discard all samples (playback) or generate zero samples (capture)
samplerate
Rate Converter Plugin Using Samplerate Library
speexrate
Rate Converter Plugin Using Speex Resampler
jack
JACK Audio Connection Kit
oss
Open Sound System
pulse
PulseAudio Sound Server
upmix
Plugin for channel upmix (4,6,8)
vdownmix
Plugin for channel downmix (stereo) with a simple spacialization
sysdefault:CARD=Intel
HDA Intel, ALC888 Analog
Default Audio Device
front:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
Front speakers
surround21:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Intel,DEV=0
HDA Intel, ALC888 Digital
IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=Intel,DEV=0
HDA Intel, HDMI 0
HDMI Audio Output
dmix:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
Direct sample mixing device
dmix:CARD=Intel,DEV=1
HDA Intel, ALC888 Digital
Direct sample mixing device
dmix:CARD=Intel,DEV=3
HDA Intel, HDMI 0
Direct sample mixing device
dsnoop:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
Direct sample snooping device
dsnoop:CARD=Intel,DEV=1
HDA Intel, ALC888 Digital
Direct sample snooping device
dsnoop:CARD=Intel,DEV=3
HDA Intel, HDMI 0
Direct sample snooping device
hw:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
Direct hardware device without any conversions
hw:CARD=Intel,DEV=1
HDA Intel, ALC888 Digital
Direct hardware device without any conversions
hw:CARD=Intel,DEV=3
HDA Intel, HDMI 0
Direct hardware device without any conversions
plughw:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
Hardware device with all software conversions
plughw:CARD=Intel,DEV=1
HDA Intel, ALC888 Digital
Hardware device with all software conversions
plughw:CARD=Intel,DEV=3
HDA Intel, HDMI 0
Hardware device with all software conversions
usbstream:CARD=Intel
HDA Intel
USB Stream Output
ImmerAufDieKleinen schrieb:
So, es läuft jetzt bei mir.
Was ich gemacht habe: Im alsamixer mit F6 die Karte mit Index 1 ausgewählt (ich habe hier nur 4 nichtssagende Optionen, vermutlich hab ich das deshalb bisher ignoriert/übersehen), danach erschien eine hübsche Grafik mit vielen Balken. Dort war "ch = 2" eingestellt, also auf 6 geändert, dazu noch alle eingänge mit "mic" in "line" geändert und die entsprechenden Balken auf 100% hochgesetzt.
Danach alsa und pulseaudio neu gestartet. Jetzt waren bei mir auf einmal die 5.1 Profile in den Klangeinstellungen wählbar. Also gesetzt und mit "speaker-test -c 6" ausprobiert ob alle Boxen korrekt angesteuert werden.
👍
Genau das hab ich mir gedacht, dass meine Einstellung "default-sample-channels = 6" nix nutzt, aber ich weiß nicht in welchem Log man das sehen kann.
Im alsamixer hab ich viele bunte Balken aber wo steht jetzt was mit "ch = 2"?