Hallo, vor kurzem habe ich Ubunut20.4 auf meinem Rechner installiert. Ziel ist die Unabhängigkeit von Windows10. Ich bin Soloselbständiger und nutze somit Ubuntu 20.4. nicht nur für Spielereien.
Folgendes ist passiert: Ich habe den HP Deskjet 2630 als Scann/Drucker in einem. Als Drucker funktionierte dieser von Anfang an. Der Scanner wird jedoch nicht erkannt. Das Gerät ist unte Windoof10 voll funktionsfähig.
1. Versuch mit XScane und anderen Scann Programmen: Jedoch wurde dieser Deskjet als Scanner nicht von XScane oder anderen Programmen erkannt..bzw. es gibt Communikatonsprobleme: Meldung von XScane ist: "Fehler beim Öffnen des Geräts hapaio:/usb/Deskjet2600_series?serial=CN9BC9C23F06PS Fehler während Geräte I/O Was das bedeutet verstehe ich nicht, Selbiges ist auch die Folge bei anderen vorinstallierten Scann Programmen bei Ubuntu.
HPLIP Ich habe die neuste Version von HPLIP installiert. Danach habe ich erfolgreich meinen HP Deskjet 2630 per USB Kabel Verbindung installiert. Der Scanner und auch der Drucker wollte.
Dann aber wollte ich den Deskjet via Wirless mit dem PC verbinden. Ich hätte dieses Experiment lieber nicht durchführen sollen. Ob wohl es ja kein Experiment ist sondern bei HPLIP angeboten ist.
Die Folge:
HPLIP kollabrierte: a) Es gibt drei Ikon für HPLIP Einmal Ion "HP to.." - für den HP Device Manger. Hier wird der Drucker nicht mehr anzeigt..bzw, nur noch Chaos.
b) Das Ikon "HP Fax.." Dieses Ikon funktionierte noch als ich alles funktionierte mit der USB Kabelverbindung. Nach dem Versuch via Wirless also Drahtlos den Deskjet zu verbinden funktioniert nichts mehr, wenn ich dieses Ikone anklicke.
Ich habe den Deskjet mit dem USB Kabel verbunden. Ohne USB Kabel funktioniert gar nichts. Die Wirless Verbundung (drahtlos) funktioniert nicht.
2. Ich deinstallierte HPLIP und installierte dieses neu. Reaktion: Das Gleiche.
3. Ich aktivierte den Deskjet über ein Drucker Programm, welches ich downloadete Dort ist der Deskjet nun allerdings unter "mplicitclass://DeskJet_2600_series_CN9BC9C23F06PS_/" registriert und hinterlegt Diesen Rechner fand Ubuntu auch schon vorher über das Textprogramm. HP - Laser Daskjet 2600 ist als weitere Rechner installiert lt. dem Druck Progamm unter hp:/usb/DeskJet_2600_series?serial=CN9BC9C23F06PS Dieser Drucker wird nicht gefunden.
Ich habe den Deskjet mit dem USB Kabel verbunden. Ohne USB Kabel funktioniert gar nichts. Die Wirless Verbundung (drahtlos) funktioniert nicht.
4. hp-check -rt Gegen 2:30 heute Nacht nachte ich dann einen hp-check Hier tauchten dann etlich rotmarkierte Fehler auf. Schaut bitte in der Anlage, dort findet ihr den vollständigen Bericht.
Frage an Euch: Wie bekomme ich den HP Deskjet via USB Kabel als Scanner & Drucker wieder ans laufen. Den Luxus einer Drahtlosverbindung will ich mir gar nicht erlauben.
Schluss: Ich bin total neu im Umgang mit Ubuntu 20.4. Und ich habe mir fest vorgenommen nicht wieder Rückfällig zu werden und in der Mircosoft Abhängkeit zu verfallen. Jedoch für einen Ottonormal Verbraucher stellt eine einfach Installation von einem HP Deskjet eine Herausforderung da, die er nicht leisten kann. Ich gehe mal davon aus dass es an HP liegt und nicht an Euch.
Soweit...Sorry wenn ich zu viel geschrieben habe. Aber ich dachte, dass es besser ist umfassender zu sein.
Schon nun bedanke ich mich bei Euch für Eure Hilfe.
MfG Frank
frank@FrankAbbas:~$ hp-check -rt Saving output in log file: /home/frank/hp-check.log HP Linux Imaging and Printing System (ver. 3.20.3) Dependency/Version Check Utility ver. 15.1 Copyright (c) 2001-18 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. 2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. 3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). Check types: a. EXTERNALDEP - External Dependencies b. GENERALDEP - General Dependencies (required both at compile and run time) c. COMPILEDEP - Compile time Dependencies d. [All are run-time checks] PYEXT SCANCONF QUEUES PERMISSION Status Types: OK MISSING - Missing Dependency or Permission or Plug-in INCOMPAT - Incompatible dependency-version or Plugin-version /Gtk-Message: 00:29:33.355: Failed to load module "appmenu-gtk-module" Gtk-Message: 00:29:33.371: Failed to load module "canberra-gtk-module" warning: ubuntu-20.04 version is not supported. Using ubuntu-19.10 versions dependencies to verify and install... --------------- | SYSTEM INFO | --------------- Kernel: 5.4.0-40-generic #44-Ubuntu SMP Tue Jun 23 00:01:04 UTC 2020 GNU/Linux Host: FrankAbbas Proc: 5.4.0-40-generic #44-Ubuntu SMP Tue Jun 23 00:01:04 UTC 2020 GNU/Linux Distribution: ubuntu 20.04 Bitness: 64 bit ----------------------- | HPLIP CONFIGURATION | ----------------------- HPLIP-Version: HPLIP 3.20.3 HPLIP-Home: /usr/share/hplip warning: HPLIP-Installation: Auto installation is not supported for ubuntu distro 20.04 version Current contents of '/etc/hp/hplip.conf' file: # hplip.conf. Generated from hplip.conf.in by configure. [hplip] version=3.20.3 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/hplip/HP ppdbase=/usr/share/ppd/hplip doc=/usr/share/doc/hplip html=/usr/share/doc/hplip-doc icon=no cupsbackend=/usr/lib/cups/backend cupsfilter=/usr/lib/cups/filter drv=/usr/share/cups/drv bin=/usr/bin apparmor=/etc/apparmor.d # Following values are determined at configure time and cannot be changed. [configure] network-build=yes libusb01-build=no pp-build=no gui-build=yes scanner-build=yes fax-build=yes dbus-build=yes cups11-build=no doc-build=yes shadow-build=no hpijs-install=yes foomatic-drv-install=yes foomatic-ppd-install=no foomatic-rip-hplip-install=no hpcups-install=yes cups-drv-install=yes cups-ppd-install=no internal-tag=3.20.3 restricted-build=no ui-toolkit=qt5 qt3=no qt4=no qt5=yes policy-kit=yes lite-build=no udev_sysfs_rules=no hpcups-only-build=no hpijs-only-build=no apparmor_build=no class-driver=no Current contents of '/var/lib/hp/hplip.state' file: Plugins are not installed. Could not access file: No such file or directory Current contents of '~/.hplip/hplip.conf' file: [commands] scan = /usr/bin/simple-scan %SANE_URI% [fax] email_address = voice_phone = [installation] date_time = 07/09/20 00:29:34 version = 3.20.3 [last_used] device_uri = "hp:/usb/DeskJet_2600_series?serial=CN9BC9C23F06PS" printer_name = working_dir = . [polling] device_list = enable = false interval = 5 [refresh] enable = false rate = 30 type = 1 [settings] systray_messages = 0 systray_visible = 0 [upgrade] last_upgraded_time = 1594226349 notify_upgrade = true pending_upgrade_time = 0 <Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment> ------------------------- | External Dependencies | ------------------------- error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running' gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.50 OK - Gtk-Message: 00:29:35.716: Failed to load module "appmenu-gtk-module" Gtk-Message: 00:29:35.730: Failed to load module "canberra-gtk-module" Gtk-Message: 00:29:35.763: Failed to load module "appmenu-gtk-module" Gtk-Message: 00:29:35.777: Failed to load module "canberra-gtk-module" xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK - scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.29 OK - error: dbus DBus - Message bus system REQUIRED - 1.12.16 MISSING 'DBUS may not be installed or not running' policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK - network network -wget OPTIONAL - 1.20.3 OK - avahi-utils avahi-utils OPTIONAL - 0.7 OK - ------------------------ | General Dependencies | ------------------------ error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed' error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed' error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed' libpthread libpthread - POSIX threads library REQUIRED - b'2.31' OK - libusb libusb - USB library REQUIRED - 1.0 OK - sane SANE - Scanning library REQUIRED - - OK - error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed' error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed' error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 MISSING 'libcrypto needs to be installed' python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.8.2 OK - python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK - error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed' error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed' python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.16 OK - python3-xml Python XML libraries REQUIRED - 2.2.9 OK - error: python3-devel Python devel - Python development files REQUIRED 2.2 3.8.2 MISSING 'python3-devel needs to be installed' python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 7.0.0 OK - python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.34 OK - -------------- | COMPILEDEP | -------------- error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed' gcc gcc - GNU Project C and C++ Compiler REQUIRED - 9.3.0 OK - make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.2.1 OK - --------------------- | Python Extentions | --------------------- cupsext CUPS-Extension REQUIRED - 3.20.3 OK - hpmudext IO-Extension REQUIRED - 3.20.3 OK - ---------------------- | Scan Configuration | ---------------------- '/etc/sane.d/dll.d/hpaio' not found. hpaio HPLIP-SANE-Backend REQUIRED - 3.20.3 OK 'hpaio found in /etc/sane.d/dll.conf' scanext Scan-SANE-Extension REQUIRED - 3.20.3 OK - ------------------------------ | DISCOVERED SCANNER DEVICES | ------------------------------ device `hpaio:/usb/DeskJet_2600_series?serial=CN9BC9C23F06PS' is a Hewlett-Packard DeskJet_2600_series all-in-one -------------------------- | DISCOVERED USB DEVICES | -------------------------- Device URI Model -------------------------------- ---------------------- hp:/usb/DeskJet_2600_series?seri HP DeskJet 2600 series al=CN9BC9C23F06PS --------------------------------- | INSTALLED CUPS PRINTER QUEUES | --------------------------------- DeskJet_2600_series_CN9BC9C23F06PS_ ----------------------------------- Type: Unknown Device URI: implicitclass://DeskJet_2600_series_CN9BC9C23F06PS_/ PPD: /etc/cups/ppd/DeskJet_2600_series_CN9BC9C23F06PS_.ppd warning: Failed to read /etc/cups/ppd/DeskJet_2600_series_CN9BC9C23F06PS_.ppd ppd file PPD Description: Printer status: Drucker DeskJet_2600_series_CN9BC9C23F06PS_ ist im Leerlauf. Aktiviert seit Do 09 Jul 2020 00:00:20 CEST warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. HP-DeskJet-2600-series ---------------------- Type: Printer Device URI: hp:/usb/DeskJet_2600_series?serial=CN9BC9C23F06PS PPD: /etc/cups/ppd/HP-DeskJet-2600-series.ppd warning: Failed to read /etc/cups/ppd/HP-DeskJet-2600-series.ppd ppd file PPD Description: Printer status: Drucker HP-DeskJet-2600-series druckt jetzt HP-DeskJet-2600-series-30. Processing page 1... Jul 2020 00:00:18 CEST error: Unable to communicate with device (code=12): hp:/usb/DeskJet_2600_series?serial=CN9BC9C23F06PS error: Device not found error: Communication status: Failed -------------- | PERMISSION | -------------- USB HP-DeskJet-2600-series Required - - OK Node:'/dev/bus/usb/003/008' Perm:' root lp rw- rw- rw- rw- r--' ----------- | SUMMARY | ----------- Missing Required Dependencies ----------------------------- error: 'libcups2' package is missing/incompatible error: 'libdbus-1-dev' package is missing/incompatible error: 'libjpeg-dev' package is missing/incompatible error: 'libcups2-dev' package is missing/incompatible error: 'cups-bsd' package is missing/incompatible error: 'cups-client' package is missing/incompatible error: 'libcupsimage2-dev' package is missing/incompatible error: 'libsane-dev' package is missing/incompatible error: 'libsnmp-dev' package is missing/incompatible error: 'snmp-mibs-downloader' package is missing/incompatible error: 'openssl' package is missing/incompatible error: 'python3-pyqt4' package is missing/incompatible error: 'gtk2-engines-pixbuf' package is missing/incompatible error: 'python3-dev' package is missing/incompatible error: 'libtool' package is missing/incompatible error: 'libtool-bin' package is missing/incompatible Missing Optional Dependencies ----------------------------- error: 'python3-dbus.mainloop.qt' package is missing/incompatible Total Errors: 13 Total Warnings: 1 Done. frank@FrankAbbas:~$ sudo apt-get install hplip-gui [sudo] Passwort für frank: Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig hplip-gui ist schon die neueste Version (3.20.3+dfsg0-2). 0 aktualisiert, 0 neu installiert, 0 zu entfernen und 103 nicht aktualisiert. frank@FrankAbbas:~$ 0 0: Befehl nicht gefunden. frank@FrankAbbas:~$ hp-check -rt Saving output in log file: /home/frank/hp-check.log HP Linux Imaging and Printing System (ver. 3.20.3) Dependency/Version Check Utility ver. 15.1 Copyright (c) 2001-18 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. 2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. 3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). Check types: a. EXTERNALDEP - External Dependencies b. GENERALDEP - General Dependencies (required both at compile and run time) c. COMPILEDEP - Compile time Dependencies d. [All are run-time checks] PYEXT SCANCONF QUEUES PERMISSION Status Types: OK MISSING - Missing Dependency or Permission or Plug-in INCOMPAT - Incompatible dependency-version or Plugin-version /Gtk-Message: 00:36:44.486: Failed to load module "appmenu-gtk-module" Gtk-Message: 00:36:44.605: Failed to load module "canberra-gtk-module" warning: ubuntu-20.04 version is not supported. Using ubuntu-19.10 versions dependencies to verify and install... --------------- | SYSTEM INFO | --------------- Kernel: 5.4.0-40-generic #44-Ubuntu SMP Tue Jun 23 00:01:04 UTC 2020 GNU/Linux Host: FrankAbbas Proc: 5.4.0-40-generic #44-Ubuntu SMP Tue Jun 23 00:01:04 UTC 2020 GNU/Linux Distribution: ubuntu 20.04 Bitness: 64 bit ----------------------- | HPLIP CONFIGURATION | ----------------------- HPLIP-Version: HPLIP 3.20.3 HPLIP-Home: /usr/share/hplip warning: HPLIP-Installation: Auto installation is not supported for ubuntu distro 20.04 version Current contents of '/etc/hp/hplip.conf' file: # hplip.conf. Generated from hplip.conf.in by configure. [hplip] version=3.20.3 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/hplip/HP ppdbase=/usr/share/ppd/hplip doc=/usr/share/doc/hplip html=/usr/share/doc/hplip-doc icon=no cupsbackend=/usr/lib/cups/backend cupsfilter=/usr/lib/cups/filter drv=/usr/share/cups/drv bin=/usr/bin apparmor=/etc/apparmor.d # Following values are determined at configure time and cannot be changed. [configure] network-build=yes libusb01-build=no pp-build=no gui-build=yes scanner-build=yes fax-build=yes dbus-build=yes cups11-build=no doc-build=yes shadow-build=no hpijs-install=yes foomatic-drv-install=yes foomatic-ppd-install=no foomatic-rip-hplip-install=no hpcups-install=yes cups-drv-install=yes cups-ppd-install=no internal-tag=3.20.3 restricted-build=no ui-toolkit=qt5 qt3=no qt4=no qt5=yes policy-kit=yes lite-build=no udev_sysfs_rules=no hpcups-only-build=no hpijs-only-build=no apparmor_build=no class-driver=no Current contents of '/var/lib/hp/hplip.state' file: Plugins are not installed. Could not access file: No such file or directory Current contents of '~/.hplip/hplip.conf' file: [commands] scan = /usr/bin/simple-scan %SANE_URI% [fax] email_address = voice_phone = [installation] date_time = 07/09/20 00:36:45 version = 3.20.3 [last_used] device_uri = "hp:/usb/DeskJet_2600_series?serial=CN9BC9C23F06PS" printer_name = working_dir = . [polling] device_list = enable = false interval = 5 [refresh] enable = false rate = 30 type = 1 [settings] systray_messages = 0 systray_visible = 0 [upgrade] last_upgraded_time = 1594226349 notify_upgrade = true pending_upgrade_time = 0 <Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment> ------------------------- | External Dependencies | ------------------------- error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running' gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.50 OK - Gtk-Message: 00:36:46.695: Failed to load module "appmenu-gtk-module" Gtk-Message: 00:36:46.708: Failed to load module "canberra-gtk-module" Gtk-Message: 00:36:46.743: Failed to load module "appmenu-gtk-module" Gtk-Message: 00:36:46.757: Failed to load module "canberra-gtk-module" xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK - scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.29 OK - error: dbus DBus - Message bus system REQUIRED - 1.12.16 MISSING 'DBUS may not be installed or not running' policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK - network network -wget OPTIONAL - 1.20.3 OK - avahi-utils avahi-utils OPTIONAL - 0.7 OK - ------------------------ | General Dependencies | ------------------------ error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed' error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed' error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed' libpthread libpthread - POSIX threads library REQUIRED - b'2.31' OK - libusb libusb - USB library REQUIRED - 1.0 OK - sane SANE - Scanning library REQUIRED - - OK - error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed' error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed' error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 MISSING 'libcrypto needs to be installed' python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.8.2 OK - python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK - error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed' error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed' python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.16 OK - python3-xml Python XML libraries REQUIRED - 2.2.9 OK - error: python3-devel Python devel - Python development files REQUIRED 2.2 3.8.2 MISSING 'python3-devel needs to be installed' python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 7.0.0 OK - python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.34 OK - -------------- | COMPILEDEP | -------------- error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed' gcc gcc - GNU Project C and C++ Compiler REQUIRED - 9.3.0 OK - make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.2.1 OK - --------------------- | Python Extentions | --------------------- cupsext CUPS-Extension REQUIRED - 3.20.3 OK - hpmudext IO-Extension REQUIRED - 3.20.3 OK - ---------------------- | Scan Configuration | ---------------------- '/etc/sane.d/dll.d/hpaio' not found. hpaio HPLIP-SANE-Backend REQUIRED - 3.20.3 OK 'hpaio found in /etc/sane.d/dll.conf' scanext Scan-SANE-Extension REQUIRED - 3.20.3 OK - ------------------------------ | DISCOVERED SCANNER DEVICES | ------------------------------ device `hpaio:/usb/DeskJet_2600_series?serial=CN9BC9C23F06PS' is a Hewlett-Packard DeskJet_2600_series all-in-one -------------------------- | DISCOVERED USB DEVICES | -------------------------- Device URI Model -------------------------------- ---------------------- hp:/usb/DeskJet_2600_series?seri HP DeskJet 2600 series al=CN9BC9C23F06PS --------------------------------- | INSTALLED CUPS PRINTER QUEUES | --------------------------------- DeskJet_2600_series_CN9BC9C23F06PS_ ----------------------------------- Type: Unknown Device URI: implicitclass://DeskJet_2600_series_CN9BC9C23F06PS_/ PPD: /etc/cups/ppd/DeskJet_2600_series_CN9BC9C23F06PS_.ppd warning: Failed to read /etc/cups/ppd/DeskJet_2600_series_CN9BC9C23F06PS_.ppd ppd file PPD Description: Printer status: Drucker DeskJet_2600_series_CN9BC9C23F06PS_ ist im Leerlauf. Aktiviert seit Do 09 Jul 2020 00:00:20 CEST warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. HP-DeskJet-2600-series ---------------------- Type: Printer Device URI: hp:/usb/DeskJet_2600_series?serial=CN9BC9C23F06PS PPD: /etc/cups/ppd/HP-DeskJet-2600-series.ppd warning: Failed to read /etc/cups/ppd/HP-DeskJet-2600-series.ppd ppd file PPD Description: Printer status: Drucker HP-DeskJet-2600-series druckt jetzt HP-DeskJet-2600-series-30. Processing page 1... Jul 2020 00:00:18 CEST error: Unable to communicate with device (code=12): hp:/usb/DeskJet_2600_series?serial=CN9BC9C23F06PS error: Device not found error: Communication status: Failed -------------- | PERMISSION | -------------- USB HP-DeskJet-2600-series Required - - OK Node:'/dev/bus/usb/003/008' Perm:' root lp rw- rw- rw- rw- r--' ----------- | SUMMARY | ----------- Missing Required Dependencies ----------------------------- error: 'libcups2' package is missing/incompatible error: 'libdbus-1-dev' package is missing/incompatible error: 'libjpeg-dev' package is missing/incompatible error: 'libcups2-dev' package is missing/incompatible error: 'cups-bsd' package is missing/incompatible error: 'cups-client' package is missing/incompatible error: 'libcupsimage2-dev' package is missing/incompatible error: 'libsane-dev' package is missing/incompatible error: 'libsnmp-dev' package is missing/incompatible error: 'snmp-mibs-downloader' package is missing/incompatible error: 'openssl' package is missing/incompatible error: 'python3-pyqt4' package is missing/incompatible error: 'gtk2-engines-pixbuf' package is missing/incompatible error: 'python3-dev' package is missing/incompatible error: 'libtool' package is missing/incompatible error: 'libtool-bin' package is missing/incompatible Missing Optional Dependencies ----------------------------- error: 'python3-dbus.mainloop.qt' package is missing/incompatible Total Errors: 13 Total Warnings: 1 Done. frank@FrankAbbas:~$
Bearbeitet von sebix:
Bitte verwende in Zukunft Codeblöcke, um die Übersicht im Forum zu verbessern!