undine
Anmeldungsdatum: 25. Januar 2007
Beiträge: 3312
|
Hallo User, mit smb://192.168.178.1/ in der Adresszeile von Dolphin eingegegeben kann ich mein NAS erreichen. Was muss in meiner Fritz!Box 7590 Firmware 7.20 eingegeben um mein NAS in Dolphin - Netzwerk - Freigegebene Ordner (SMB) direkt angezeigt zu bekommen? Meine Versuche enden mit: Es ist keine Arbeitsgruppe im lokalen Netzwerk auffindbar. Dies könnte durch eine aktivierte Firewall verursacht werden. Greetz undine https://wiki.ubuntuusers.de/Samba/ https://wiki.ubuntuusers.de/Samba_Client_KDE/ https://forum.ubuntuusers.de/topic/samba-workgroups-werden-nicht-gesehen/2/
|
kB
Supporter, Wikiteam
Anmeldungsdatum: 4. Oktober 2007
Beiträge: 8616
Wohnort: Münster
|
undine schrieb: […] in der Adresszeile von Dolphin eingegegeben kann ich mein NAS erreichen.
Ist Fritzbox 7590 = NAS?
Was muss in meiner Fritz!Box 7590 Firmware 7.20 eingegeben
Diese Firmware wurde heute (!) veröffentlicht. Wahrscheinlich kennst Du sie daher zur Zeit von allen UbuntuUsers.de-Benutzern am besten.
um mein NAS in Dolphin - Netzwerk - Freigegebene Ordner (SMB) direkt angezeigt zu bekommen?
Wahrscheinlich gar nichts. Sondern Du musst die anderen SMB-Server und SMB-Clients im Netzwerk konfigurieren.
Meine Versuche enden mit: Es ist keine Arbeitsgruppe im lokalen Netzwerk auffindbar.
Klingt so als gäbe es keinen "local master browser" im Netzwerk. Siehe: Samba Client/Windows-Netzwerk
|
Bournless
Anmeldungsdatum: 4. Mai 2019
Beiträge: 915
|
|
undine
(Themenstarter)
Anmeldungsdatum: 25. Januar 2007
Beiträge: 3312
|
Hallo Users, der Link von Bournless war bekannt und löst meine Anfrage nicht. so richtig weiter komme ich nicht. https://forum.ubuntuusers.de/topic/samba-workgroups-werden-nicht-gesehen/2/ Fritzbox 7590 = NAS, so sieht es aus. Mit smb://192.168.178.1/FRITZ.NAS/ in der Adresszeile von Dolphinkann ich das NAS erreichen. Wie kann ich aber Dolphin - Netzwerk - Freigegebene Ordner (SMB) nutzen? In dem Ordner kann ich irgendwie nichts tun, anlegen. Greetz undine
|
archy
Anmeldungsdatum: 24. November 2009
Beiträge: 1920
|
hallo, schau mal hier unter Punkt 3. https://service.avm.de/help/de/FRITZ-Box-7590/019/hilfe_howto_usb_speicher_smb Ohne das altes SMB1 kriegst du das nicht hin. Du musst dann aber auf den Clients Samba komplett installieren ( ist nicht Standard !! ) und in /etc/samba/smb.conf die Protokolle SMB1 / NT1 aktivieren. Zum Beispiel so server max protocol = SMB2
client max protocol = NT1 Ausserdem dort die Arbeitsgruppe definieren und einen der Clients ( Sambaserver ) zum masterbrowser erklären. Der muss dann auch laufen, wenn es nur einen Client gibt ( der dann den masterbrowser mimt ) kann das bis zu einer halben Stunde dauern bis es funktioniert. Aus Sicherheitsgründen nur für interne Netze zu empfehlen, und Freigabenamen sollten keine Sonderzeichen enthalten. Auf der Fritzbox natürlich die gleichen Benutzernamen und Passwörter verwenden wie auf den Clients. gruß archy
|
Ubunux
Anmeldungsdatum: 12. Juni 2006
Beiträge: 16426
|
Kannst du in Dolphin nicht einfach ein Lesezeichen mit smb://192.168.178.1/FRITZ.NAS/ erstellen? (ich benutze kein KDE und kenne deswegen auch Dolphin nicht)
|
undine
(Themenstarter)
Anmeldungsdatum: 25. Januar 2007
Beiträge: 3312
|
Hallo Users, eine Lesezeichen habe ich gesetzt, nur was kann mit Dolphin - Netzwerk - Freigegebene Ordner (SMB) machen? Was hat mit meiner Fragen die Anleitung von AVM Puntk 3. zu tun? @archy
Ohne das altes SMB1 kriegst du das nicht hin. Du musst dann aber auf den Clients Samba komplett installieren ( ist nicht Standard !! )
Die Aussage ist falsch. Seit der Firmware 7.20 für die Fritz!Box 7590 wird SMB2/SMB3 unterstützt. Greetz undine
|
Steev
Anmeldungsdatum: 5. September 2006
Beiträge: 2237
|
Ich finds ja immer grausam wie frickelig Samba bei normalen Linux-Desktop-OS sein kann, aber vllt kommst du auch mit der fstab weiter? https://www.elektronik-kompendium.de/sites/raspberry-pi/2102201.htm#:~:text=Pr%C3%BCfen%20Sie%20den%20Zugriff%20auf,Samba%2DFreigaben%20automatisch%20eingebunden%20werden. Das Lesezeichen geht aber wesentlich einfacher und erspart Zeit und Nerven. Kodi@LibreELEC hat eine wesentlich humanere intuitive Einrichtung von Samba und ist auch ein Linux. Da klappt alles auf Anhieb. Oder auch Android.
|
archy
Anmeldungsdatum: 24. November 2009
Beiträge: 1920
|
@undine,
@archy Ohne das altes SMB1 kriegst du das nicht hin. Du musst dann aber auf den Clients Samba komplett installieren ( ist nicht Standard !! ) Die Aussage ist falsch. Seit der Firmware 7.20 für die Fritz!Box 7590 wird SMB2/SMB3 unterstützt.
Das habe ich auch nie bezweifelt, aber um die Freigabe für Dolphin sichtbar zu machen brauchst du SMB1 und zwar auf deinem Client. Es ist das in Ubuntu standardmäßig aktive SMB3, das die Sichtbarkeit behindert. Das Grundproblem liegt nicht bei der Fritzbox sondern bei Ubuntu, und wie ich soeben festgestellt habe auch bei mir, die NAS werden zwar noch angezeigt, der Inhalt / Freigaben kann aber nicht geladen werden. Siehe Bilder. gruß archy
- Bilder
|
undine
(Themenstarter)
Anmeldungsdatum: 25. Januar 2007
Beiträge: 3312
|
aber um die Freigabe für Dolphin sichtbar zu machen brauchst du SMB1 und zwar auf deinem Client.
Irgendwie unlogisch, ist Dolphin nicht so richtig aktuell? SMB1 Client wird für SBM2/SMB3 Server benötigt. Oder wird bei einem Client immer SMB1 benötigt? cat /etc/samba/smb.conf
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
# - When such options are commented with ";", the proposed setting
# differs from the default Samba behaviour
# - When commented with "#", the proposed setting is the default
# behaviour of Samba but the option is considered important
# enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
#======================= Global Settings =======================
[global]
## Browsing/Identification ###
# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = WORKGROUP
# server string is the equivalent of the NT Description field
server string = %h server (Samba, Ubuntu)
#### Networking ####
# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0
# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = yes
#### Debugging/Accounting ####
# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Cap the size of the individual log files (in KiB).
max log size = 1000
# We want Samba to only log to /var/log/samba/log.{smbd,nmbd}.
# Append syslog@1 if you want important messages to be sent to syslog too.
logging = file
# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d
####### Authentication #######
# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
# Most people will want "standalone server" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
server role = standalone server
obey pam restrictions = yes
# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes
# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes
# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user
########## Domains ###########
#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set
#
# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
# logon path = \\%N\%U\profile
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
# logon home = \\%N\%U
# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd
# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.
# The following assumes a "machines" group exists on the system
; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.
; add group script = /usr/sbin/addgroup --force-badname %g
############ Misc ############
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m
# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap config * : backend = tdb
; idmap config * : range = 3000-7999
; idmap config YOURDOMAINHERE : backend = tdb
; idmap config YOURDOMAINHERE : range = 100000-999999
; template shell = /bin/bash
# Setup usershare options to enable non-root users to share folders
# with the net usershare command.
# Maximum number of usershare. 0 means that usershare is disabled.
# usershare max shares = 100
# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
usershare allow guests = yes
#======================= Share Definitions =======================
# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
; comment = Home Directories
; browseable = no
# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
; read only = yes
# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
; create mask = 0700
# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
; directory mask = 0700
# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "username"
# can connect to \\server\username
# This might need tweaking when using external authentication schemes
; valid users = %S
# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; read only = yes
# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
; comment = Users profiles
; path = /home/samba/profiles
; guest ok = no
; browseable = no
; create mask = 0600
; directory mask = 0700
[printers]
comment = All Printers
browseable = no
path = /var/spool/samba
printable = yes
guest ok = no
read only = yes
create mask = 0700
# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
browseable = yes
read only = yes
guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
; write list = root, @lpadmin
server max protocol = SMB2
client max protocol = NT1
Bei mir bringt der Eintrag server max protocol = SMB2
client max protocol = NT1 keine Änderung. client min protocol = SMB2
client max protocol = SMB3
Auch keine Änderung
|
archy
Anmeldungsdatum: 24. November 2009
Beiträge: 1920
|
@undine, es ist leider so, dass die Namensauflösung in SMB3 gar nicht mehr funktioniert und in SMB2 nur in manchen Distributionen, nur in SMB1 läuft ( leider lief ) sie problemlos. https://debianforum.de/forum/viewtopic.php?t=177087 Abhilfe kann schaffen nur mit festen IPs anstatt DHCP zu arbeiten. Dazu musst du in der Fritzbox die interne Adresse auf feste IP, IPV4 einstellen und den DHCP Server abschalten.
Geräte wie Smartphones die eigentlich nur DHCP wollen kannst du dann über die Gastnetzfunktion ins Internet lassen. Zusätzlich hilft auf den Linux-Clients die Dateien /etc/hosts und /etc/hostallow zu editieren und dort die Geräte mit ihren festen IPs einzutragen, selbstverständlich musst du bei Linux-Clients den Netzwerkmanager oder die Datei /etc/network/interfaces anpassen. Bei Windows-Clients musst du adäquat die Datei C:\Windows\system32\drivers\etc\lmhost bzw. lmhost.sam genauso ergänzen. Das behebt aber noch nicht den momentanen Fehler, da muß ich auch noch suchen. gruß archy
|
Bournless
Anmeldungsdatum: 4. Mai 2019
Beiträge: 915
|
undine Schlau schnacken, aber nicht lesen was da steht.. Viel Erfolg noch!
|
undine
(Themenstarter)
Anmeldungsdatum: 25. Januar 2007
Beiträge: 3312
|
https://avm.de/hinweise-zur-umstellung-des-zugriffs-auf-fritznas-inhalte-ueber-das-smb-protokoll/
Nutzung von SMBv3 auf Windows, Mac und Linux PCs Neuinstallationen von Windows 10 nutzen seit Ende 2017 ab Werk SMBv3 und NTLMv2. Nach dem Update auf das FRITZ!Labor können Sie die Unterstützung für SMBv1 über die Funktion "Windows-Features aktivieren oder deaktivieren" → "Unterstützung für die SMB 1.0/CIFS-Dateifreigabe" deaktivieren. Apple Geräte mit macOS "Catalina" (ab Version 10.15) nutzen ebenfalls ab Werk SMBv3. Auf Linux-PCs kann eine manuelle Konfiguration der Nutzung von SMBv3/2 notwendig sein. Fügen Sie hierfür in der Konfigurationsdatei "etc/samba/smb.conf" im Bereich "Global Settings" die Zeilen client min protocol = SMB2
client max protocol = SMB3 hinzu.
Neuer Versuch: cat /etc/samba/smb.conf
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
# - When such options are commented with ";", the proposed setting
# differs from the default Samba behaviour
# - When commented with "#", the proposed setting is the default
# behaviour of Samba but the option is considered important
# enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
#======================= Global Settings =======================
[global]
client min protocol = SMB2
client max protocol = SMB3
## Browsing/Identification ###
# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = WORKGROUP
# server string is the equivalent of the NT Description field
server string = %h server (Samba, Ubuntu)
#### Networking ####
# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0
# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = yes
#### Debugging/Accounting ####
# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Cap the size of the individual log files (in KiB).
max log size = 1000
# We want Samba to only log to /var/log/samba/log.{smbd,nmbd}.
# Append syslog@1 if you want important messages to be sent to syslog too.
logging = file
# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d
####### Authentication #######
# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
# Most people will want "standalone server" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
server role = standalone server
obey pam restrictions = yes
# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes
# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes
# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user
########## Domains ###########
#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set
#
# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
# logon path = \\%N\%U\profile
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
# logon home = \\%N\%U
# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd
# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.
# The following assumes a "machines" group exists on the system
; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.
; add group script = /usr/sbin/addgroup --force-badname %g
############ Misc ############
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m
# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap config * : backend = tdb
; idmap config * : range = 3000-7999
; idmap config YOURDOMAINHERE : backend = tdb
; idmap config YOURDOMAINHERE : range = 100000-999999
; template shell = /bin/bash
# Setup usershare options to enable non-root users to share folders
# with the net usershare command.
# Maximum number of usershare. 0 means that usershare is disabled.
# usershare max shares = 100
# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
usershare allow guests = yes
#======================= Share Definitions =======================
# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
; comment = Home Directories
; browseable = no
# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
; read only = yes
# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
; create mask = 0700
# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
; directory mask = 0700
# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "username"
# can connect to \\server\username
# This might need tweaking when using external authentication schemes
; valid users = %S
# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; read only = yes
# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
; comment = Users profiles
; path = /home/samba/profiles
; guest ok = no
; browseable = no
; create mask = 0600
; directory mask = 0700
[printers]
comment = All Printers
browseable = no
path = /var/spool/samba
printable = yes
guest ok = no
read only = yes
create mask = 0700
# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
browseable = yes
read only = yes
guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
; write list = root, @lpadmin
Es wurde die Position von client min protocol = SMB2
client max protocol = SMB3 geändert. Das Problem wurde nicht gelöst.
|
kB
Supporter, Wikiteam
Anmeldungsdatum: 4. Oktober 2007
Beiträge: 8616
Wohnort: Münster
|
Hast Du den von mir empfohlenen Wiki-Artikel gelesen und angewendet?
|
undine
(Themenstarter)
Anmeldungsdatum: 25. Januar 2007
Beiträge: 3312
|
https://wiki.ubuntuusers.de/Samba_Client/Windows-Netzwerk/
Dateimanager wie beispielsweise Nautilus bieten unter Netzwerke (auch: Netzwerk durchsuchen, Netzwerk-Server) das Durchsuchen des „Windows-Netzwerks“ (auch: „Netzwerkumgebung“) an. In der Praxis wird leider oft nur ein leerer Ordner angezeigt. Hier wird beschrieben, wie man seine Server und Clients konfigurieren muss, damit im Dateimanager der Ordner „Windows-Netzwerk“ und auch die neben diesem Ordner dargestellten Server-Symbole wie gewünscht funktionieren. Die Grundlagen aus den Artikeln Samba und Samba Client GNOME werden hier vorausgesetzt.
Kubuntu 20.04 nutzt Dolphin als Dateimanager. Hallo KB, ein Windows-Netzwerk habe ich nicht. Welchen Abschnitt meinst Du dort konkret? Diesen? https://wiki.ubuntuusers.de/Samba_Client/Windows-Netzwerk/#Samba-Client-konfigurieren Nur SMB2/SMB3 möchte ich nutzen. Wo speichert Dolphin die eingerichteten Netzwerkverbindungen? Wie kann ich bei Dolphin, Netzwerkverbindungen einen "Reset" durchführen? Greetz undine
|