nico111
Anmeldungsdatum: 7. Februar 2018
Beiträge: 398
|
Wer kann Bitte Hilfen. Ubuntu 20.04 startet nicht mehr. Bleibt bei login. Stehen Oder muß ich alles neu installieren.
sudo apt update geht auch nicht. Das heißt ich habe keine Netzwerk. Foto's habe ich Hoch geladen. Wer kann Bitte Hilfen.
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo fdisk --lu
fdisk: Unbekannte Option »--lu«
Rufen Sie „fdisk --help“ auf, um weitere Informationen zu erhalten.
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo fdisk -lu
Festplatte /dev/sda: 223,6 GiB, 240057409536 Bytes, 468862128 Sektoren
Einheiten: Sektoren von 1 * 512 = 512 Bytes
Sektorgröße (logisch/physikalisch): 512 Bytes / 512 Bytes
E/A-Größe (minimal/optimal): 512 Bytes / 512 Bytes
Festplattenbezeichnungstyp: dos
Festplattenbezeichner: 0xaec41683
Gerät Boot Anfang Ende Sektoren Größe Kn Typ
/dev/sda1 * 2048 468860927 468858880 223,6G 83 Linux
Festplatte /dev/sdb: 114,6 GiB, 123010547712 Bytes, 240254976 Sektoren
Einheiten: Sektoren von 1 * 512 = 512 Bytes
Sektorgröße (logisch/physikalisch): 512 Bytes / 512 Bytes
E/A-Größe (minimal/optimal): 512 Bytes / 512 Bytes
Festplattenbezeichnungstyp: dos
Festplattenbezeichner: 0x2fb9a0b6
Gerät Boot Anfang Ende Sektoren Größe Kn Typ
/dev/sdb1 * 2048 240254001 240251954 114,6G 83 Linux
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
Wer kann Bitte Hilfen.
- Bilder
|
nico111
(Themenstarter)
Anmeldungsdatum: 7. Februar 2018
Beiträge: 398
|
Dann ich installiere Ubuntu 20.04 neu. Dann ich installiere alles neue.
|
hakel
Anmeldungsdatum: 13. August 2009
Beiträge: 23336
|
https://wiki.ubuntuusers.de/Notfall/ Achte darauf home und System/Root auf getrennte Partitionen zu legen. Dann sind Neuinstallationen einfacher.
|
nico111
(Themenstarter)
Anmeldungsdatum: 7. Februar 2018
Beiträge: 398
|
Achte darauf Home und System/Root auf getrennte Partitionen zu legen. Dann sind Neuinstallationen einfacher. Da hast du recht. Zu spät. Ich hab es schon Neu Installiert. Das Foto Hoch geladen habe. Was hast das. (Black Out)
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo fdisk -lu
Festplatte /dev/loop0: 54,97 MiB, 57614336 Bytes, 112528 Sektoren
Einheiten: Sektoren von 1 * 512 = 512 Bytes
Sektorgröße (logisch/physikalisch): 512 Bytes / 512 Bytes
E/A-Größe (minimal/optimal): 512 Bytes / 512 Bytes
Festplatte /dev/loop1: 16 KiB, 16384 Bytes, 32 Sektoren
Einheiten: Sektoren von 1 * 512 = 512 Bytes
Sektorgröße (logisch/physikalisch): 512 Bytes / 512 Bytes
E/A-Größe (minimal/optimal): 512 Bytes / 512 Bytes
Festplatte /dev/loop2: 14,89 MiB, 15589376 Bytes, 30448 Sektoren
Einheiten: Sektoren von 1 * 512 = 512 Bytes
Sektorgröße (logisch/physikalisch): 512 Bytes / 512 Bytes
E/A-Größe (minimal/optimal): 512 Bytes / 512 Bytes
Festplatte /dev/loop3: 27,9 MiB, 28405760 Bytes, 55480 Sektoren
Einheiten: Sektoren von 1 * 512 = 512 Bytes
Sektorgröße (logisch/physikalisch): 512 Bytes / 512 Bytes
E/A-Größe (minimal/optimal): 512 Bytes / 512 Bytes
Festplatte /dev/loop4: 55,33 MiB, 58007552 Bytes, 113296 Sektoren
Einheiten: Sektoren von 1 * 512 = 512 Bytes
Sektorgröße (logisch/physikalisch): 512 Bytes / 512 Bytes
E/A-Größe (minimal/optimal): 512 Bytes / 512 Bytes
Festplatte /dev/loop5: 29,9 MiB, 31334400 Bytes, 61200 Sektoren
Einheiten: Sektoren von 1 * 512 = 512 Bytes
Sektorgröße (logisch/physikalisch): 512 Bytes / 512 Bytes
E/A-Größe (minimal/optimal): 512 Bytes / 512 Bytes
Festplatte /dev/loop6: 14,89 MiB, 15589376 Bytes, 30448 Sektoren
Einheiten: Sektoren von 1 * 512 = 512 Bytes
Sektorgröße (logisch/physikalisch): 512 Bytes / 512 Bytes
E/A-Größe (minimal/optimal): 512 Bytes / 512 Bytes
Festplatte /dev/sda: 223,58 GiB, 240057409536 Bytes, 468862128 Sektoren
Festplattenmodell: SanDisk SSD PLUS
Einheiten: Sektoren von 1 * 512 = 512 Bytes
Sektorgröße (logisch/physikalisch): 512 Bytes / 512 Bytes
E/A-Größe (minimal/optimal): 512 Bytes / 512 Bytes
Festplattenbezeichnungstyp: dos
Festplattenbezeichner: 0xbd4945c2
Gerät Boot Anfang Ende Sektoren Größe Kn Typ
/dev/sda1 * 2048 1050623 1048576 512M b W95 FAT32
/dev/sda2 1052670 468860927 467808258 223,1G 5 Erweiterte
/dev/sda5 1052672 468860927 467808256 223,1G 83 Linux
Festplatte /dev/sdb: 114,58 GiB, 123010547712 Bytes, 240254976 Sektoren
Festplattenmodell: Ultra Trek
Einheiten: Sektoren von 1 * 512 = 512 Bytes
Sektorgröße (logisch/physikalisch): 512 Bytes / 512 Bytes
E/A-Größe (minimal/optimal): 512 Bytes / 512 Bytes
Festplattenbezeichnungstyp: dos
Festplattenbezeichner: 0x2fb9a0b6
Gerät Boot Anfang Ende Sektoren Größe Kn Typ
/dev/sdb1 * 2048 240254001 240251954 114,6G 83 Linux
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
- Bilder
|
nico111
(Themenstarter)
Anmeldungsdatum: 7. Februar 2018
Beiträge: 398
|
Ich Hab diese SSD Festplatte für 36,90 Euro gekauft und ein Einbau Rahmen für 3,89 Euro gekauft. Und im Rechner Intern eingebaut.
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo smartctl -i /dev/sda
[sudo] Passwort für mimoun:
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-42-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Marvell based SanDisk SSDs
Device Model: SanDisk SSD PLUS 240GB
Serial Number: 2012B5442604
LU WWN Device Id: 5 001b44 4a74f3f3e
Firmware Version: UF4004RL
User Capacity: 240.057.409.536 bytes [240 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3, ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Aug 11 14:53:33 2020 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
mimoun@mimoun:~$
mimoun@mimoun:~$
Nach Installation muss ich Zugriffsrechte ändern, so das man z.b Fotos speichern kann auf eigene SSD-Festplatte... Und so das Musik Dateien auf eigene SSD-Festplatte für 36,90 Euro speichern kann. Linux Ubuntu: Zugriffsrechte ändern. https://praxistipps.chip.de/ubuntu-zugriffsrechte-aendern-so-gehts_49353 Ordner dann unterordnen sind schreib geschützt. Kopieren und Einfügen geht nicht und Ausschneiden und Einfügen in Unter-Ordnen geht nicht. https://forum.ubuntuusers.de/topic/chmod-ordner-und-uner-ordner-auf-777-setzen/ mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo chmod 777 -c -R /dev/sda
der Modus von '/dev/sda' wurde von 0660 (rw-rw----) in 0777 (rwxrwxrwx) geändert
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
Habe ich alles frei gegeben jetzt. Nicht das ich Nach neu Start das Computer wieder Probleme habe mit (Kopieren und Einfügen oder Ausschneiden und Einfügen von Ordner in Unter-Ordnen - von Ordner in Unter-Ordnen und von Ordner in Unter-Ordnen nicht geht.
|
nico111
(Themenstarter)
Anmeldungsdatum: 7. Februar 2018
Beiträge: 398
|
Ich habe SSD Festplatte für 36,90 Euro Euro gekauft. Jetzt ist sie Intern eingebaut. Ist die SSD Festplatte kaputt, dann habe ich noch Garantie. Nach 5 Tage, Ich kann sie zurück bringen. und mein 36,90 Euro Auszahlen lassen. Warum geht es nicht unter Laufwerke Dateisystem überprüfen und Dateisystem reparieren. Fotos habe ich hoch geladen.
- Bilder
|
Wibuntu
Anmeldungsdatum: 21. Januar 2011
Beiträge: 564
|
nico111 schrieb: Ich habe SSD Festplatte für 36,90 Euro Euro gekauft. Jetzt ist sie Intern eingebaut. Ist die SSD Festplatte kaputt, dann habe ich noch Garantie. Nach 5 Tage, Ich kann sie zurück bringen. und mein 36,90 Euro Auszahlen lassen.
Interessiert hier niemanden...
Warum geht es nicht unter Laufwerke Dateisystem überprüfen und
Das hier abarbeiten https://forum.ubuntuusers.de/topic/welche-themen-gehoeren-hier-her-und-welche-ni-31/
Dateisystem reparieren. Fotos habe ich hoch geladen.
Wird schwer möglich sein ein Dateisystem auszuhängen welches vom Betriebssystem benutzt wird, wozu auch? Bei einer Neuinstallation braucht man sich nicht mit den Rechten auseinanderzusetzen, da funktioniert es normal....
|
nico111
(Themenstarter)
Anmeldungsdatum: 7. Februar 2018
Beiträge: 398
|
Verwendete Ubuntu-Version und Variante
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 20.04.1 LTS
Release: 20.04
Codename: focal
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=20.04
DISTRIB_CODENAME=focal
DISTRIB_DESCRIPTION="Ubuntu 20.04.1 LTS"
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
System information /Hardware mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo lshw -businfo
Bus-Informationen Gerät Klasse Beschreibung
===============================================================
system OptiPlex 755
bus 0DR845
memory 64KiB BIOS
cpu@0 processor Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz
memory 32KiB L1 Cache
memory 2MiB L2 Cache
memory 8GiB Systemspeicher
memory 2GiB DIMM DDR2 Synchron 667 MHz (1,5 ns)
memory 2GiB DIMM DDR2 Synchron 667 MHz (1,5 ns)
memory 2GiB DIMM DDR2 Synchron 667 MHz (1,5 ns)
memory 2GiB DIMM DDR2 Synchron 667 MHz (1,5 ns)
pci@0000:00:00.0 bridge 82Q35 Express DRAM Controller
pci@0000:00:01.0 bridge 82Q35 Express PCI Express Root Port
pci@0000:00:02.0 display 82Q35 Express Integrated Graphics Controller
pci@0000:00:02.1 display 82Q35 Express Integrated Graphics Controller
pci@0000:00:03.0 communication 82Q35 Express MEI Controller
pci@0000:00:03.2 storage 82Q35 Express PT IDER Controller
pci@0000:00:03.3 communication 82Q35 Express Serial KT Controller
pci@0000:00:19.0 enp0s25 network 82566DM-2 Gigabit Network Connection
pci@0000:00:1a.0 bus 82801I (ICH9 Family) USB UHCI Controller #4
usb@3 usb3 bus UHCI Host Controller
usb@3:2 input HP Basic USB Keyboard
pci@0000:00:1a.1 bus 82801I (ICH9 Family) USB UHCI Controller #5
usb@4 usb4 bus UHCI Host Controller
pci@0000:00:1a.7 bus 82801I (ICH9 Family) USB2 EHCI Controller #2
usb@1 usb1 bus EHCI Host Controller
pci@0000:00:1b.0 multimedia 82801I (ICH9 Family) HD Audio Controller
pci@0000:00:1c.0 bridge 82801I (ICH9 Family) PCI Express Port 1
pci@0000:00:1d.0 bus 82801I (ICH9 Family) USB UHCI Controller #1
usb@5 usb5 bus UHCI Host Controller
pci@0000:00:1d.1 bus 82801I (ICH9 Family) USB UHCI Controller #2
usb@6 usb6 bus UHCI Host Controller
usb@6:1 input Usb Mouse
pci@0000:00:1d.2 bus 82801I (ICH9 Family) USB UHCI Controller #3
usb@7 usb7 bus UHCI Host Controller
pci@0000:00:1d.7 bus 82801I (ICH9 Family) USB2 EHCI Controller #1
usb@2 usb2 bus EHCI Host Controller
usb@2:5 generic 802.11 n WLAN
pci@0000:00:1e.0 bridge 82801 PCI Bridge
pci@0000:00:1f.0 bridge 82801IO (ICH9DO) LPC Interface Controller
pci@0000:00:1f.2 scsi0 storage 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA Controller [IDE mode]
scsi@0:0.0.0 /dev/sda disk 240GB SanDisk SSD PLUS
scsi@0:0.0.0,1 /dev/sda1 volume 512MiB Windows FAT Laufwerk
scsi@0:0.0.0,2 /dev/sda2 volume 223GiB Extended partition
/dev/sda5 volume 223GiB EXT4-Laufwerk
scsi@1:0.0.0 /dev/cdrom disk DVD+-RW AD-5170S
pci@0000:00:1f.3 bus 82801I (ICH9 Family) SMBus Controller
pci@0000:00:1f.5 storage 82801I (ICH9 Family) 2 port SATA Controller [IDE mode]
system PnP device PNP0c01
system PnP device PNP0b00
printer PnP device PNP0401
communication PnP device PNP0501
usb@2:5 wlx5067f011eccc network Kabellose Verbindung
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ inxi -Fx
System: Host: mimoun Kernel: 5.4.0-7634-generic x86_64 bits: 64 compiler: gcc v: 9.3.0 Desktop: MATE 1.24.0
Distro: Ubuntu 20.04.1 LTS (Focal Fossa)
Machine: Type: Desktop System: Dell product: OptiPlex 755 v: N/A serial: <superuser/root required>
Mobo: Dell model: 0DR845 serial: <superuser/root required> BIOS: Dell v: A04 date: 11/05/2007
CPU: Topology: Dual Core model: Intel Core2 Duo E4500 bits: 64 type: MCP arch: Core Merom rev: D L2 cache: 2048 KiB
flags: lm nx pae sse sse2 sse3 ssse3 bogomips: 8778
Speed: 1332 MHz min/max: 1200/2200 MHz Core speeds (MHz): 1: 1213 2: 1203
Graphics: Device-1: Intel 82Q35 Express Integrated Graphics vendor: Dell OptiPlex 755 driver: i915 v: kernel bus ID: 00:02.0
Display: x11 server: X.Org 1.20.8 driver: intel unloaded: fbdev,modesetting,vesa resolution: 1280x1024~60Hz
OpenGL: renderer: Mesa DRI Intel Q35 v: 1.4 Mesa 20.0.8 direct render: Yes
Audio: Device-1: Intel 82801I HD Audio vendor: Dell Optiplex 755 driver: snd_hda_intel v: kernel bus ID: 00:1b.0
Sound Server: ALSA v: k5.4.0-7634-generic
Network: Device-1: Intel 82566DM-2 Gigabit Network vendor: Dell OptiPlex 755 driver: e1000e v: 3.2.6-k port: ecc0
bus ID: 00:19.0
IF: enp0s25 state: down mac: 00:1e:4f:b2:d6:b0
Device-2: ZyXEL NWD2105 802.11bgn Wireless Adapter [Ralink RT3070] type: USB driver: rt2800usb bus ID: 2-5:3
IF: wlx5067f011eccc state: up mac: 50:67:f0:11:ec:cc
Drives: Local Storage: total: 223.57 GiB used: 68.79 GiB (30.8%)
ID-1: /dev/sda vendor: SanDisk model: SSD PLUS 240GB size: 223.57 GiB temp: 48 C
Partition: ID-1: / size: 218.57 GiB used: 68.79 GiB (31.5%) fs: ext4 dev: /dev/sda5
Sensors: System Temperatures: cpu: 57.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info: Processes: 191 Uptime: 5h 59m Memory: 7.64 GiB used: 1.92 GiB (25.1%) Init: systemd runlevel: 5 Compilers:
gcc: 9.3.0 Shell: bash v: 5.0.17 inxi: 3.0.38
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ inxi
CPU: Dual Core Intel Core2 Duo E4500 (-MCP-) speed/min/max: 1197/1200/2200 MHz Kernel: 5.4.0-7634-generic x86_64 Up: 5h 59m
Mem: 1963.8/7824.0 MiB (25.1%) Storage: 223.57 GiB (30.8% used) Procs: 191 Shell: bash 5.0.17 inxi: 3.0.38
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ hwinfo --short
cpu:
Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz, 2194 MHz
Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz, 2194 MHz
keyboard:
/dev/input/event2 HP KU-0316 Keyboard
mouse:
/dev/input/mice China Resource Semico Usb Mouse
monitor:
EIZO S1921-X
graphics card:
Dell OptiPlex 755
Dell OptiPlex 755
sound:
Dell Optiplex 755
storage:
Dell Optiplex 755
Dell Optiplex 755
Dell OptiPlex 755
network:
enp0s25 Dell OptiPlex 755
wlx5067f011eccc ZyXEL NWD2105 802.11bgn Wireless Adapter [Ralink RT3070]
network interface:
enp0s25 Ethernet network interface
lo Loopback network interface
wlx5067f011eccc Ethernet network interface
disk:
/dev/sda SanDisk SSD PLUS
partition:
/dev/sda1 Partition
/dev/sda2 Partition
/dev/sda5 Partition
cdrom:
/dev/sr0 Optiarc DVD+-RW AD-5170S
usb controller:
Dell Optiplex 755
Dell Optiplex 755
Dell Optiplex 755
Dell Optiplex 755
Dell Optiplex 755
Dell Optiplex 755
Dell Optiplex 755
bios:
BIOS
bridge:
Dell Optiplex 755
Intel 82801IO (ICH9DO) LPC Interface Controller
Dell OptiPlex 755
Dell Optiplex 755
Dell OptiPlex 755
hub:
Linux Foundation 1.1 root hub
Linux Foundation 1.1 root hub
Linux Foundation 1.1 root hub
Linux Foundation 1.1 root hub
Linux Foundation 2.0 root hub
Linux Foundation 1.1 root hub
Linux Foundation 2.0 root hub
memory:
Main Memory
unknown:
FPU
DMA controller
PIC
Keyboard controller
/dev/lp0 Parallel controller
Dell Optiplex 755
Dell OptiPlex 755
Dell OptiPlex 755
Serial controller
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ lsscsi
[0:0:0:0] disk ATA SanDisk SSD PLUS 04RL /dev/sda
[1:0:0:0] cd/dvd Optiarc DVD+-RW AD-5170S 101B /dev/sr0
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ lspci
00:00.0 Host bridge: Intel Corporation 82Q35 Express DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 82Q35 Express PCI Express Root Port (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82Q35 Express Integrated Graphics Controller (rev 02)
00:02.1 Display controller: Intel Corporation 82Q35 Express Integrated Graphics Controller (rev 02)
00:03.0 Communication controller: Intel Corporation 82Q35 Express MEI Controller (rev 02)
00:03.2 IDE interface: Intel Corporation 82Q35 Express PT IDER Controller (rev 02)
00:03.3 Serial controller: Intel Corporation 82Q35 Express Serial KT Controller (rev 02)
00:19.0 Ethernet controller: Intel Corporation 82566DM-2 Gigabit Network Connection (rev 02)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IO (ICH9DO) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA Controller [IDE mode] (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA Controller [IDE mode] (rev 02)
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
cat /etc/fstab ls -l /dev/sda
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda5 during installation
UUID=536af3fd-f843-456d-8cd6-590750d10d56 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=6843-9E59 /boot/efi vfat umask=0077 0 1
/swapfile none swap sw 0 0
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ ls -l /dev/sda
brw-rw---- 1 root disk 8, 0 Aug 12 19:13 /dev/sda
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@m sudo fdisk -l sudo parted -l lspci lsusb sudo lsblk -o NAME,UUID,FSTYPE,LABEL,MOUNTPOINT
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo fdisk -l
[sudo] Passwort für mimoun:
Festplatte /dev/loop0: 54,97 MiB, 57614336 Bytes, 112528 Sektoren
Einheiten: Sektoren von 1 * 512 = 512 Bytes
Sektorgröße (logisch/physikalisch): 512 Bytes / 512 Bytes
E/A-Größe (minimal/optimal): 512 Bytes / 512 Bytes
Festplatte /dev/loop1: 55,33 MiB, 58007552 Bytes, 113296 Sektoren
Einheiten: Sektoren von 1 * 512 = 512 Bytes
Sektorgröße (logisch/physikalisch): 512 Bytes / 512 Bytes
E/A-Größe (minimal/optimal): 512 Bytes / 512 Bytes
Festplatte /dev/loop2: 27,9 MiB, 28405760 Bytes, 55480 Sektoren
Einheiten: Sektoren von 1 * 512 = 512 Bytes
Sektorgröße (logisch/physikalisch): 512 Bytes / 512 Bytes
E/A-Größe (minimal/optimal): 512 Bytes / 512 Bytes
Festplatte /dev/loop3: 29,9 MiB, 31334400 Bytes, 61200 Sektoren
Einheiten: Sektoren von 1 * 512 = 512 Bytes
Sektorgröße (logisch/physikalisch): 512 Bytes / 512 Bytes
E/A-Größe (minimal/optimal): 512 Bytes / 512 Bytes
Festplatte /dev/loop4: 16 KiB, 16384 Bytes, 32 Sektoren
Einheiten: Sektoren von 1 * 512 = 512 Bytes
Sektorgröße (logisch/physikalisch): 512 Bytes / 512 Bytes
E/A-Größe (minimal/optimal): 512 Bytes / 512 Bytes
Festplatte /dev/loop5: 14,89 MiB, 15589376 Bytes, 30448 Sektoren
Einheiten: Sektoren von 1 * 512 = 512 Bytes
Sektorgröße (logisch/physikalisch): 512 Bytes / 512 Bytes
E/A-Größe (minimal/optimal): 512 Bytes / 512 Bytes
Festplatte /dev/loop6: 14,89 MiB, 15589376 Bytes, 30448 Sektoren
Einheiten: Sektoren von 1 * 512 = 512 Bytes
Sektorgröße (logisch/physikalisch): 512 Bytes / 512 Bytes
E/A-Größe (minimal/optimal): 512 Bytes / 512 Bytes
Festplatte /dev/sda: 223,58 GiB, 240057409536 Bytes, 468862128 Sektoren
Festplattenmodell: SanDisk SSD PLUS
Einheiten: Sektoren von 1 * 512 = 512 Bytes
Sektorgröße (logisch/physikalisch): 512 Bytes / 512 Bytes
E/A-Größe (minimal/optimal): 512 Bytes / 512 Bytes
Festplattenbezeichnungstyp: dos
Festplattenbezeichner: 0xbd4945c2
Gerät Boot Anfang Ende Sektoren Größe Kn Typ
/dev/sda1 * 2048 1050623 1048576 512M b W95 FAT32
/dev/sda2 1052670 468860927 467808258 223,1G 5 Erweiterte
/dev/sda5 1052672 468860927 467808256 223,1G 83 Linux
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo parted -l
Modell: ATA SanDisk SSD PLUS (scsi)
Festplatte /dev/sda: 240GB
Sektorgröße (logisch/physisch): 512B/512B
Partitionstabelle: msdos
Disk-Flags:
Nummer Anfang Ende Größe Typ Dateisystem Flags
1 1049kB 538MB 537MB primary fat32 boot
2 539MB 240GB 240GB extended
5 539MB 240GB 240GB logical ext4
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ lspci
00:00.0 Host bridge: Intel Corporation 82Q35 Express DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 82Q35 Express PCI Express Root Port (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82Q35 Express Integrated Graphics Controller (rev 02)
00:02.1 Display controller: Intel Corporation 82Q35 Express Integrated Graphics Controller (rev 02)
00:03.0 Communication controller: Intel Corporation 82Q35 Express MEI Controller (rev 02)
00:03.2 IDE interface: Intel Corporation 82Q35 Express PT IDER Controller (rev 02)
00:03.3 Serial controller: Intel Corporation 82Q35 Express Serial KT Controller (rev 02)
00:19.0 Ethernet controller: Intel Corporation 82566DM-2 Gigabit Network Connection (rev 02)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IO (ICH9DO) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA Controller [IDE mode] (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA Controller [IDE mode] (rev 02)
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ lsusb
Bus 002 Device 003: ID 0586:341e ZyXEL Communications Corp. NWD2105 802.11bgn Wireless Adapter [Ralink RT3070]
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 1a2c:0042 China Resource Semico Co., Ltd Usb Mouse
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 03f0:0024 HP, Inc KU-0316 Keyboard
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo lsblk -o NAME,UUID,FSTYPE,LABEL,MOUNTPOINT
NAME UUID FSTYPE LABEL MOUNTPOINT
loop0 squashfs /snap/core18/1705
loop1 squashfs /snap/core18/1885
loop2 squashfs /snap/snapd/7264
loop3 squashfs /snap/snapd/8542
loop4 squashfs /snap/software-boutique/54
loop5 squashfs /snap/ubuntu-mate-welcome/524
loop6 squashfs /snap/ubuntu-mate-welcome/539
sda
├─sda1 6843-9E59 vfat
├─sda2
└─sda5 536af3fd-f843-456d-8cd6-590750d10d56 ext4 /
sr0
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
|
nico111
(Themenstarter)
Anmeldungsdatum: 7. Februar 2018
Beiträge: 398
|
https://www.giga.de/extra/linux/tipps/linux-mount-datentraeger-einbinden-dynamisch-statisch-so-gehts/ https://ubuntuforums.org/showthread.php?t=2414687 Habe ich von diese Artikel oben.
Betreff: [ubuntu] (udisks-error-quark, 14)
Fehler beim Aufheben der Bereitstellung / dev / sdb1: Ziel ist beschäftigt (udisks-error-quark, 14)
Wenn ein Prozess Dateien verwendet oder mit einem PWD in einem Verzeichnis auf dem Flash-Laufwerk sitzt, ist er "beschäftigt" und kann nicht gemountet werden.
Wenn Sie Hilfe beim Erstellen eines Live-Boot-Flash-Geräts benötigen, gibt es dafür eine Anleitung.
Wenn Sie Hilfe beim Umhängen des Speichers benötigen (umount ist der Befehl, nicht das Aufheben der Bereitstellung),
kann er nicht verwendet werden. Bestimmte Dateisysteme werden immer verwendet - wie die Boot- und Betriebssystempartitionen.
Der einzige Weg, auf sie zuzugreifen, wenn die Partition (en) nicht gemountet sind, besteht darin, von einem anderen Medium zu booten - einer SSD, einer Festplatte, einem Flash-Laufwerk, einem USB-Laufwerk, einer CD-ROM, einer DVD usw.
sudo fdisk -l /dev/sda
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo fdisk -l /dev/sda
[sudo] Passwort für mimoun:
Festplatte /dev/sda: 223,58 GiB, 240057409536 Bytes, 468862128 Sektoren
Festplattenmodell: SanDisk SSD PLUS
Einheiten: Sektoren von 1 * 512 = 512 Bytes
Sektorgröße (logisch/physikalisch): 512 Bytes / 512 Bytes
E/A-Größe (minimal/optimal): 512 Bytes / 512 Bytes
Festplattenbezeichnungstyp: dos
Festplattenbezeichner: 0xbd4945c2
Gerät Boot Anfang Ende Sektoren Größe Kn Typ
/dev/sda1 * 2048 1050623 1048576 512M b W95 FAT32
/dev/sda2 1052670 468860927 467808258 223,1G 5 Erweiterte
/dev/sda5 1052672 468860927 467808256 223,1G 83 Linux
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
Jetzt versteh es. Man muss neue gekaufte SSD Festplatten Partitionieren. 50 % für Home Verzeichnis. und 50 % für Ubuntu 20.04 (Betriebssystem) bei Festplatte Größe von 250 GB SSD. oder 80 % für Home Verzeichnis von 250 GB Größe SSD Festplatte Größe. Dann hab ich was gelernt Festplatten immer Partitionieren. 1 Partition für Ubuntu (Betriebssystem) und die 2 Partition für Home Verzeichnis. Wegen Neuinstallation, dann hat man wenige sorgen. Backup von Home Verzeichnis hat man schon. Man muß nur auf passen das man sie nicht überschriebt.
|
Kätzchen
Anmeldungsdatum: 1. Mai 2011
Beiträge: 6677
Wohnort: Technische Republik
|
nico111 schrieb:
50 % für Home Verzeichnis. und 50 % für Ubuntu 20.04 (Betriebssystem) bei Festplatte Größe von 250 GB SSD. oder 80 % für Home Verzeichnis von 250 GB Größe SSD Festplatte Größe.
Für das System (/) richte ich eigentlich immer eine 20 GB Partition ein.
|
nico111
(Themenstarter)
Anmeldungsdatum: 7. Februar 2018
Beiträge: 398
|
Für das System (/) richte ich eigentlich immer eine 20 GB Partition ein. 20 GB Partition System (/) ist die Betriebssystem UBUNTU 20.04 Partition, wo das Betriebssystem UBUNTU 20.04 wohnen wird.
|
Kätzchen
Anmeldungsdatum: 1. Mai 2011
Beiträge: 6677
Wohnort: Technische Republik
|
/ ist der Einhängepunkt der Partition wo Ubuntu installiert wird. /home ist der von der Homepartition.
|
nico111
(Themenstarter)
Anmeldungsdatum: 7. Februar 2018
Beiträge: 398
|
Ich habe Snapd komplett Deinstalliert. sudo apt purge snapd Er hat die neue SSD zu verdampfen gebracht. Ich habe Snapd komplett Deinstalliert. Weil ich habe System Monitor oben neben der Uhr der zeigt mir Alles. ram, cpu, netzwerk, datenträger ssd Tacho. Darum habe ich gemerkt. Ubuntu 20.04 mate. Ich habe Snapd komplett Deinstalliert.
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ ls -l /dev/sda
brw-rw---- 1 root disk 8, 0 Aug 12 19:13 /dev/sda
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ snap list
Name Version Rev Aufzeichnung Herausgeber Hinweise
core18 20200724 1885 latest/stable canonical✓ base
snapd 2.45.2 8542 latest/stable canonical✓ snapd
software-boutique 0+git.f633ffb 54 latest/stable/… flexiondotorg classic
ubuntu-mate-welcome 20.04.0-8942ba3b 539 latest/stable/… flexiondotorg classic
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo apt purge snapd
[sudo] Passwort für mimoun:
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Das folgende Paket wurde automatisch installiert und wird nicht mehr benötigt:
squashfs-tools
Verwenden Sie »sudo apt autoremove«, um es zu entfernen.
Die folgenden Pakete werden ENTFERNT:
snapd*
0 aktualisiert, 0 neu installiert, 1 zu entfernen und 0 nicht aktualisiert.
Nach dieser Operation werden 120 MB Plattenplatz freigegeben.
Möchten Sie fortfahren? [J/n]
(Lese Datenbank ... 436929 Dateien und Verzeichnisse sind derzeit installiert.)
Entfernen von snapd (2.45.1+20.04.2) ...
Trigger für desktop-file-utils (0.24-1ubuntu3) werden verarbeitet ...
Trigger für mime-support (3.64ubuntu1) werden verarbeitet ...
Trigger für gnome-menus (3.36.0-1ubuntu1) werden verarbeitet ...
Trigger für man-db (2.9.1-1) werden verarbeitet ...
Trigger für bamfdaemon (0.5.3+18.04.20180207.2-0ubuntu2) werden verarbeitet ...
Rebuilding /usr/share/applications/bamf-2.index...
(Lese Datenbank ... 436856 Dateien und Verzeichnisse sind derzeit installiert.)
Löschen der Konfigurationsdateien von snapd (2.45.1+20.04.2) ...
Stopping snap-core18-1705.mount
Stopping unit snap-core18-1705.mount
Waiting until unit snap-core18-1705.mount is stopped [attempt 1]
snap-core18-1705.mount is stopped.
Removing snap core18 and revision 1705
Removing snap-core18-1705.mount
Stopping snap-core18-1885.mount
Stopping unit snap-core18-1885.mount
Waiting until unit snap-core18-1885.mount is stopped [attempt 1]
snap-core18-1885.mount is stopped.
Removing snap core18 and revision 1885
Removing snap-core18-1885.mount
Stopping snap-snapd-7264.mount
Stopping unit snap-snapd-7264.mount
Waiting until unit snap-snapd-7264.mount is stopped [attempt 1]
snap-snapd-7264.mount is stopped.
Removing snap snapd and revision 7264
Removing snap-snapd-7264.mount
Stopping snap-snapd-8542.mount
Stopping unit snap-snapd-8542.mount
Waiting until unit snap-snapd-8542.mount is stopped [attempt 1]
snap-snapd-8542.mount is stopped.
Removing snap snapd and revision 8542
Removing snap-snapd-8542.mount
Stopping snap-software\x2dboutique-54.mount
Stopping unit snap-software\x2dboutique-54.mount
Waiting until unit snap-software\x2dboutique-54.mount is stopped [attempt 1]
snap-software\x2dboutique-54.mount is stopped.
Removing snap software-boutique and revision 54
Removing snap-software\x2dboutique-54.mount
Stopping snap-ubuntu\x2dmate\x2dwelcome-524.mount
Stopping unit snap-ubuntu\x2dmate\x2dwelcome-524.mount
Waiting until unit snap-ubuntu\x2dmate\x2dwelcome-524.mount is stopped [attempt 1]
snap-ubuntu\x2dmate\x2dwelcome-524.mount is stopped.
Removing snap ubuntu-mate-welcome and revision 524
Removing snap-ubuntu\x2dmate\x2dwelcome-524.mount
Stopping snap-ubuntu\x2dmate\x2dwelcome-539.mount
Stopping unit snap-ubuntu\x2dmate\x2dwelcome-539.mount
Waiting until unit snap-ubuntu\x2dmate\x2dwelcome-539.mount is stopped [attempt 1]
snap-ubuntu\x2dmate\x2dwelcome-539.mount is stopped.
Removing snap ubuntu-mate-welcome and revision 539
Removing snap-ubuntu\x2dmate\x2dwelcome-539.mount
Final directory cleanup
Discarding preserved snap namespaces
Removing extra snap-confine apparmor rules
Removing snapd cache
Removing snapd state
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo rm -rf ~/snap
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo rm -rf /snap
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo rm -rf /var/snap
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo rm -rf /var/lib/snapd
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ snap list
bash: /usr/bin/snap: Datei oder Verzeichnis nicht gefunden
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
|
Wibuntu
Anmeldungsdatum: 21. Januar 2011
Beiträge: 564
|
Nachdem es mit der deutschen Sprache schwer ist, hier das Problem verständlich zu schildern, würde ich vorschlagen, neu installieren und alles dem Installer überlassen, dann gibt es die wenigsten Probleme, also nichts partitionieren und nicht in die Rechte eingreifen. Man muss eine neue Festplatte vor Installierung von Ubuntu 20.04 nicht partitionieren, ausser man ist mit dem System vertraut und ist sich über die Folgen bewusst.
|
nico111
(Themenstarter)
Anmeldungsdatum: 7. Februar 2018
Beiträge: 398
|
Habe ich nach diese Anleitung nach auf meine Neue SSD installiert. https://www.heise.de/tipps-tricks/Wie-installiert-man-Ubuntu-auf-seinem-PC-3877156.html Habe ich diese Dialogfeld geklickt. ––- Markieren Sie "Festplatte löschen und Ubuntu installieren" und klicken dann auf "Jetzt ––--installieren". –––Achtung: Die Inhalte auf Ihrer Festplatte werden komplett gelöscht. Dann ist das Raus gekommen am Ende. Nach Eine Stunde Installation Dauer ist das Raus gekommen.
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo fdisk -lu
Festplatte /dev/sda: 223,58 GiB, 240057409536 Bytes, 468862128 Sektoren
Festplattenmodell: SanDisk SSD PLUS
Einheiten: Sektoren von 1 * 512 = 512 Bytes
Sektorgröße (logisch/physikalisch): 512 Bytes / 512 Bytes
E/A-Größe (minimal/optimal): 512 Bytes / 512 Bytes
Festplattenbezeichnungstyp: dos
Festplattenbezeichner: 0xbd4945c2
Gerät Boot Anfang Ende Sektoren Größe Kn Typ
/dev/sda1 * 2048 1050623 1048576 512M b W95 FAT32
/dev/sda2 1052670 468860927 467808258 223,1G 5 Erweiterte
/dev/sda5 1052672 468860927 467808256 223,1G 83 Linux
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
Das ist normal bei Betriebssystem Ubuntu 20.04. Diese Anleitung habe ich gar nicht gesehen. Das ist eine schöne Anleitung mit Bilder u.s.w. Diese Anleitung habe ich gar nicht gesehen. https://wiki.ubuntuusers.de/Ubuntu_Installation/ Wenn ich in paar Wochen Oder in 4 Monat alles Neu installiere , werde ich Diese Anleitung in der Tat umsetzen.
|