Ich habe eine DSL-Fritzbox mit Ubuntu-PC per LAN, und einigen Wlan-Geräten. Manchmal habe ich ein Wlan (IoT)-Gerät, auf das ich mit dem Brwoser im PC nicht zugreifen kann, mit dem Browser auf dem Handy komme ich aber drauf. Vom PC aus geht nicht einmal ein ping. Aktuell habe ich wieder so ein IoT-Gerät 192.168.178.66. Ein anderes Gerät, ein Shelly-Stecker, ist aber problemlos erreichbar. Ipv6 ist nicht aktiviert. Was könnte das sein?
route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default fritz.box 0.0.0.0 UG 100 0 0 enp0s31f6 link-local 0.0.0.0 255.255.0.0 U 1000 0 0 enp0s31f6 192.168.178.0 0.0.0.0 255.255.255.0 U 100 0 0 enp0s31f6
ifconfig enp0s31f6: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.178.20 netmask 255.255.255.0 broadcast 192.168.178.255 inet6 fe80::77b3:8e74:35d6:2059 prefixlen 64 scopeid 0x20<link> ether 9c:5c:8e:8f:a6:d3 txqueuelen 1000 (Ethernet) RX packets 42459 bytes 39117826 (39.1 MB) RX errors 0 dropped 759 overruns 0 frame 0 TX packets 27977 bytes 3600435 (3.6 MB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 16 memory 0xf7000000-f7020000 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 566 bytes 60359 (60.3 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 566 bytes 60359 (60.3 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
traceroute 192.168.178.66 traceroute to 192.168.178.66 (192.168.178.66), 30 hops max, 60 byte packets 1 192.168.178.66 (192.168.178.66) 4.552 ms 4.501 ms 5.056 ms
ping 192.168.178.66 # Problemgerät PING 192.168.178.66 (192.168.178.66) 56(84) bytes of data. 64 bytes from 192.168.178.66: icmp_seq=1 ttl=128 time=2.57 ms ^C --- 192.168.178.66 ping statistics --- 7 packets transmitted, 1 received, 85,7143% packet loss, time 6111ms rtt min/avg/max/mdev = 2.568/2.568/2.568/0.000 ms
ping 192.168.178.64 # Shelly-Stecker PING 192.168.178.64 (192.168.178.64) 56(84) bytes of data. 64 bytes from 192.168.178.64: icmp_seq=1 ttl=128 time=7.35 ms 64 bytes from 192.168.178.64: icmp_seq=2 ttl=128 time=14.0 ms 64 bytes from 192.168.178.64: icmp_seq=3 ttl=128 time=4.54 ms 64 bytes from 192.168.178.64: icmp_seq=4 ttl=128 time=2.65 ms 64 bytes from 192.168.178.64: icmp_seq=5 ttl=128 time=2.47 ms
tracepath 192.168.178.66 1?: [LOCALHOST] pmtu 1500 1: 192.168.178.66 2.732ms reached 1: 192.168.178.66 2.445ms reached Resume: pmtu 1500 hops 1 back 1