Hi,
ich übertrage gerade knapp 1 Gbyte Backupdaten (ca. 250'000 einzelne Dateien) von meiner alten externen Backup-Festplatte auf die neue. Das passiert mit einer Geschwindigkeit von ca. 25 ... 30 Mbyte/Sekunde.
Ist das eine "übliche" Geschwindigkeit und damit o.k., oder ist da irgendwo "die Handbremse angezogen"?
Es handelt sich um zwei externe USB 3.0 Festplatten (keine SSD), die jeweils mit einem USB 3.0 Verlängerungskabel (1m) an zwei nebeneinanderliegenden USB 3.0 Steckplätzen an der PC-Rückseite angeschlossen sind.
marcus@marcus-GA-78LMT-USB3:~$ lsusb -t /: Bus 09.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M |__ Port 1: Dev 6, If 0, Class=Mass Storage, Driver=usb-storage, 5000M |__ Port 2: Dev 5, If 0, Class=Mass Storage, Driver=usb-storage, 5000M /: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M /: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/2p, 12M /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/3p, 12M /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/3p, 12M /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/3p, 12M /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/3p, 12M /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/6p, 480M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/6p, 480M |__ Port 4: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M |__ Port 2: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M |__ Port 4: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M |__ Port 4: Dev 4, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
Hat da jemand einen Tipp für mich? Dankeschön + Gruß, Marcus.