Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Du wolltest doch die Herausforderung 😛
Ja?? Wenn du es schreibst 😉
Hier warten ein paar Updates
Spiele die Updates ein.Ist auch Alsa und Pulseaudio dabei! Falls dann immer noch nicht besser,testest du erst mal mit einem Live System https://wiki.ubuntuusers.de/Downloads/Hirsute_Hippo/ testest den Sound und berichtest – dann sehen wir weiter. Gruß Stephan
|
TheEYE
(Themenstarter)
Anmeldungsdatum: 25. April 2007
Beiträge: 185
Wohnort: Norderstedt
|
Hier ist der Beweis:
Kellerkind_2009 schrieb: TheEYE schrieb: Hallo liebes Forum,
Das Thema verfolgt mich schon über Jahre und diverse Ubuntu-Versionen.
Sehr Ungewöhnlich!Ist natürlich jetzt der Anreiz das heraus zu finden 😬
Das Einspielen der Updates brachte keine Besserung. Mit dem Live-System 21.04 konnte ich meinen hier bisher genutzten "Killer" (Amazon Video) nicht zum Laufen bekommen (DRM / Codecs 😠 ). Ich bin auf Youtube ausgewichen und der Ton blieb stabil. Allerdings deckt sich mMn. hier etwas nicht mit unserer bisherigen Vermutung / Spurensuche. ubuntu@ubuntu:~$ cat /proc/asound/card*/codec\#0
Codec: Conexant CX20585
Address: 0
AFG Function Id: 0x1 (unsol 1)
MFG Function Id: 0x2 (unsol 1)
Vendor Id: 0x14f15069
Subsystem Id: 0x17aa2157
Revision Id: 0x100302
Modem Function Group: 0x2
Default PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D1 D2 D3 D3cold CLKSTOP
Power: setting=D0, actual=D0
GPIO: io=4, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Control: name="Speaker Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Speaker Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="CX20585 Analog", type="Audio", device=0
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-Out vals: [0x2e 0x2e]
Converter: stream=5, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Control: name="Headphone Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-Out vals: [0x80 0x80]
Converter: stream=5, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Control: name="Beep Playback Volume", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Control: name="Beep Playback Switch", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0
Amp-Out vals: [0x01]
Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Device: name="CX20585 Analog", type="Audio", device=0
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
Amp-In vals: [0x50 0x50] [0x80 0x80] [0x50 0x50] [0x80 0x80]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17 0x18 0x23* 0x24
Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17* 0x18 0x23 0x24
Node 0x16 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17* 0x18 0x23 0x24
Node 0x17 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Control: name="Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x1a* 0x1b 0x1d 0x1e
Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x1a* 0x1b 0x1d 0x1e
Node 0x19 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x042140f0: [Jack] HP Out at Ext Right
Conn = 1/8, Color = Green
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=02, enabled=1
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10 0x11*
Node 0x1a [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x00001324: IN Detect
Vref caps: HIZ 50 80
Pin Default 0x61a190f0: [N/A] Mic at Sep Rear
Conn = 1/8, Color = Pink
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=03, enabled=1
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x1b [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00011334: IN OUT EAPD Detect
Vref caps: HIZ 50 80
EAPD 0x2: EAPD
Pin Default 0x04a190f0: [Jack] Mic at Ext Right
Conn = 1/8, Color = Pink
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=04, enabled=1
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1c [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0x612140f0: [N/A] HP Out at Sep Rear
Conn = 1/8, Color = Green
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=01, enabled=1
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10 0x11*
Node 0x1d [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00010034: IN OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x601700f0: [N/A] Speaker at Sep N/A
Conn = Analog, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1e [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x00000024: IN Detect
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x1f [Pin Complex] wcaps 0x400501: Stereo
Pincap 0x00000010: OUT
Pin Default 0x901701f0: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power states: D0 D1 D2 D3 D3cold
Power: setting=D3, actual=D3
Connection: 2
0x10* 0x11
Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 1
0x12
Node 0x21 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x22 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 1
0x21
Node 0x23 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Control: name="Internal Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00000020: IN
Pin Default 0x90a601f0: [Fixed] Mic at Int N/A
Conn = Digital, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x24 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Amp-In caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10 0x11
Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono Ich meine diesen Teil hier: Node 0x1f [Pin Complex] wcaps 0x400501: Stereo
Pincap 0x00000010: OUT
Pin Default 0x901701f0: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power states: D0 D1 D2 D3 D3cold
Power: setting=D3, actual=D3
Connection: 2
0x10* 0x11 Als nächstes werde ich mal die aktuell installierte Version (20.04) als Live-System testen.
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Moin, etwas weiter sind wir schon 😉 Das Problem wird von deinen Internen Beep Speaker ausgelöst (Modem) wie es scheint 👿 Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Control: name="Beep Playback Volume", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Control: name="Beep Playback Switch", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0
Amp-Out vals: [0x01]
Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Device: name="CX20585 Analog", type="Audio", device=0
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
Amp-In vals: [0x50 0x50] [0x80 0x80] [0x50 0x50] [0x80 0x80]
Converter: stream=0, channel=0
--------------------------------------------------
Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Control: name="Beep Playback Volume", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Control: name="Beep Playback Switch", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0
Amp-Out vals: [0x00]
Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Device: name="CX20585 Analog", type="Audio", device=0
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
Amp-In vals: [0x50 0x50] [0x80 0x80] [0x50 0x50] [0x80 0x80]
Converter: stream=1, channel=0 Das erzeugt dann erst mal die Stummschaltung wie ich es sehe Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Control: name="Speaker Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Speaker Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="CX20585 Analog", type="Audio", device=0
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-Out vals: [0x2e 0x2e]
-----------------------------------------------------
Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Control: name="Speaker Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Speaker Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="CX20585 Analog", type="Audio", device=0
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-Out vals: [0x2f 0x2f] Kannst du da was im Bios abschalten/Umschalten richtung MIC/Beep/Audio/Modem ? Wie in deinem Post (Screenshot) https://forum.ubuntuusers.de/topic/ton-stoppt-bei-wiedergabe-von-online-videos-nu/#post-9262085 zu sehen ist,ist im alsamixer dein "Beep" auch eingeschaltet. Eventuell sollten wir das mal Blacklisten ...
|
TheEYE
(Themenstarter)
Anmeldungsdatum: 25. April 2007
Beiträge: 185
Wohnort: Norderstedt
|
Moin, magst du mir erklären wie du das aus den Ausgaben herausgelesen hast? Das BIOS habe ich eben durchforstet, da habe ich leider keine entsprechenden Einstellungsmöglichkeiten gefunden. Test mit dem 20.04 Live-System ist noch nicht erfolgt.
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
TheEYE schrieb: Moin, magst du mir erklären wie du das aus den Ausgaben herausgelesen hast?
Siehe mal das Gelbe und Rate 😛 Node 0x1f [Pin Complex] wcaps 0x400501: Stereo
Pincap 0x00000010: OUT
Pin Default 0x901701f0: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power states: D0 D1 D2 D3 D3cold
Power: setting=D3, actual=D3
Connection: 2
0x10* 0x11 Das Sternchen zeigt die Aktive Auswahl.
Test mit dem 20.04 Live-System ist noch nicht erfolgt.
Bin gespannt 😉 Nachtrag Hast du den "Beep" mal im Alsamixer abgeschaltet – so mal als "Test"??
|
TheEYE
(Themenstarter)
Anmeldungsdatum: 25. April 2007
Beiträge: 185
Wohnort: Norderstedt
|
Hm, also wenn du mich so fragst sage ich für die internen Lautsprecher stehen die Ausgaben 0x10 und 0x11 zur Verfügung. Es wird 0x10 ausgewählt. 0x10 ist
Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Und 0x11 ist
Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Aber da ergeben die zugehörigen Nodes in meinen Augen keine Auffälligkeiten. Erwartet hätte ich irgendwas Richtung Node 0x11 = "Pieptongeber" oder externer Audioausgabg und Node 0x10 = interne Lautsprecher o.ä. Hierbei klingelt es noch nicht:
Node 0x1f [Pin Complex] wcaps 0x400501: Stereo Wenn ich meine Ausgabe zu "geht" und "geht nicht" vergleiche finde ich die von dir zuvor markierten Unterschiede aber keinen Unterschied bei der Auswahl über 0x10, bzw. 0x11. Kellerkind_2009 schrieb: Hast du den "Beep" mal im Alsamixer abgeschaltet – so mal als "Test"??
Die Einstellung bekomme ich momentan nicht angezeigt (siehe angehängten Screenshot). Test mit dem Live-System 20.04 lief analog zum letzten Live-System. Ton blieb bei Youtube stabil. ubuntu@ubuntu:~$ cat /proc/asound/card*/codec\#0
Codec: Conexant CX20585
Address: 0
AFG Function Id: 0x1 (unsol 1)
MFG Function Id: 0x2 (unsol 1)
Vendor Id: 0x14f15069
Subsystem Id: 0x17aa2157
Revision Id: 0x100302
Modem Function Group: 0x2
Default PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D1 D2 D3 D3cold CLKSTOP
Power: setting=D0, actual=D0
GPIO: io=4, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Control: name="Speaker Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Speaker Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="CX20585 Analog", type="Audio", device=0
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-Out vals: [0x32 0x32]
Converter: stream=5, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Control: name="Headphone Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-Out vals: [0x80 0x80]
Converter: stream=5, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Control: name="Beep Playback Volume", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Control: name="Beep Playback Switch", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0
Amp-Out vals: [0x01]
Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Device: name="CX20585 Analog", type="Audio", device=0
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
Amp-In vals: [0x50 0x50] [0x80 0x80] [0x50 0x50] [0x80 0x80]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17 0x18 0x23* 0x24
Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17* 0x18 0x23 0x24
Node 0x16 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17* 0x18 0x23 0x24
Node 0x17 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Control: name="Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x1a* 0x1b 0x1d 0x1e
Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x1a* 0x1b 0x1d 0x1e
Node 0x19 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x042140f0: [Jack] HP Out at Ext Right
Conn = 1/8, Color = Green
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=02, enabled=1
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10 0x11*
Node 0x1a [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x00001324: IN Detect
Vref caps: HIZ 50 80
Pin Default 0x61a190f0: [N/A] Mic at Sep Rear
Conn = 1/8, Color = Pink
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=03, enabled=1
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x1b [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00011334: IN OUT EAPD Detect
Vref caps: HIZ 50 80
EAPD 0x2: EAPD
Pin Default 0x04a190f0: [Jack] Mic at Ext Right
Conn = 1/8, Color = Pink
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=04, enabled=1
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1c [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0x612140f0: [N/A] HP Out at Sep Rear
Conn = 1/8, Color = Green
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=01, enabled=1
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10 0x11*
Node 0x1d [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00010034: IN OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x601700f0: [N/A] Speaker at Sep N/A
Conn = Analog, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1e [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x00000024: IN Detect
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x1f [Pin Complex] wcaps 0x400501: Stereo
Pincap 0x00000010: OUT
Pin Default 0x901701f0: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power states: D0 D1 D2 D3 D3cold
Power: setting=D3, actual=D3
Connection: 2
0x10* 0x11
Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 1
0x12
Node 0x21 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x22 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 1
0x21
Node 0x23 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Control: name="Internal Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00000020: IN
Pin Default 0x90a601f0: [Fixed] Mic at Int N/A
Conn = Digital, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x24 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Amp-In caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10 0x11
Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono
- Bilder
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Wir machen erst mal wieder das der Conexant Treiber verwendet wird 😀 sudo rm /etc/modprobe.d/alsa.conf Neustart. Nun noch etwas Gelb dazu (mag sein das ich auf den Holzweg bin – wer weiß) Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Control: name="Beep Playback Volume", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Control: name="Beep Playback Switch", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0
Amp-Out vals: [0x00]
Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Device: name="CX20585 Analog", type="Audio", device=0
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
Amp-In vals: [0x50 0x50] [0x80 0x80] [0x50 0x50] [0x80 0x80]
Converter: stream=1, channel=0 Nun Vergleiche das mal mit den Ausgaben der Live Systeme. Teste auch mal echo -e "options snd_hda_intel beep_mode=0 " | sudo tee -a /etc/modprobe.d/alsa.conf gefolgt vom Neustart und Test/Vergleich – am besten erst mal auch nur Youtube.
|
TheEYE
(Themenstarter)
Anmeldungsdatum: 25. April 2007
Beiträge: 185
Wohnort: Norderstedt
|
Kellerkind_2009 schrieb:
> sudo rm /etc/modprobe.d/alsa.conf
> Neustart.
Erledigt. Jetzt kann ich den Fehler gerade nicht reproduzieren 😐 20 Minuten Youtube und im Anschluss 45 Minuten Amazon... Das ist schon sehr auffällig. max@max-X201t:~$ cat /proc/asound/card*/codec\#0
Codec: Conexant CX20585
Address: 0
AFG Function Id: 0x1 (unsol 1)
MFG Function Id: 0x2 (unsol 1)
Vendor Id: 0x14f15069
Subsystem Id: 0x17aa2157
Revision Id: 0x100302
Modem Function Group: 0x2
Default PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D1 D2 D3 D3cold CLKSTOP
Power: setting=D0, actual=D0
GPIO: io=4, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Control: name="Speaker Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Speaker Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="CX20585 Analog", type="Audio", device=0
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-Out vals: [0x32 0x32]
Converter: stream=5, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Control: name="Headphone Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-Out vals: [0x80 0x80]
Converter: stream=5, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Control: name="Beep Playback Volume", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Control: name="Beep Playback Switch", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0
Amp-Out vals: [0x01]
Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Device: name="CX20585 Analog", type="Audio", device=0
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
Amp-In vals: [0x50 0x50] [0x80 0x80] [0x50 0x50] [0x80 0x80]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17 0x18 0x23* 0x24
Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17* 0x18 0x23 0x24
Node 0x16 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17* 0x18 0x23 0x24
Node 0x17 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Control: name="Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x1a* 0x1b 0x1d 0x1e
Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x1a* 0x1b 0x1d 0x1e
Node 0x19 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x042140f0: [Jack] HP Out at Ext Right
Conn = 1/8, Color = Green
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=02, enabled=1
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10 0x11*
Node 0x1a [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x00001324: IN Detect
Vref caps: HIZ 50 80
Pin Default 0x61a190f0: [N/A] Mic at Sep Rear
Conn = 1/8, Color = Pink
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=03, enabled=1
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x1b [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00011334: IN OUT EAPD Detect
Vref caps: HIZ 50 80
EAPD 0x2: EAPD
Pin Default 0x04a190f0: [Jack] Mic at Ext Right
Conn = 1/8, Color = Pink
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=04, enabled=1
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1c [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0x612140f0: [N/A] HP Out at Sep Rear
Conn = 1/8, Color = Green
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=01, enabled=1
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10 0x11*
Node 0x1d [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00010034: IN OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x601700f0: [N/A] Speaker at Sep N/A
Conn = Analog, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1e [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x00000024: IN Detect
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x1f [Pin Complex] wcaps 0x400501: Stereo
Pincap 0x00000010: OUT
Pin Default 0x901701f0: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power states: D0 D1 D2 D3 D3cold
Power: setting=D3, actual=D3
Connection: 2
0x10* 0x11
Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 1
0x12
Node 0x21 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x22 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 1
0x21
Node 0x23 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Control: name="Internal Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x2f, mute=0
Amp-In vals: [0x04 0x04]
Pincap 0x00000020: IN
Pin Default 0x90a601f0: [Fixed] Mic at Int N/A
Conn = Digital, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x24 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Amp-In caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10 0x11
Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono Das hier habe ich daher noch nicht getestet: Kellerkind_2009 schrieb:
> echo -e "options snd_hda_intel beep_mode=0 " | sudo tee -a /etc/modprobe.d/alsa.conf
> gefolgt vom Neustart und Test/Vergleich – am besten erst mal auch nur Youtube.
Wie wollen wir weiter vorgehen? Ich versuche bei den nächsten Systemstarts immer den Ton wieder "kaputt" zu machen und teste dann entsprechend weiter? Kellerkind_2009 schrieb: Nun noch etwas Gelb dazu (mag sein das ich auf den Holzweg bin – wer weiß)
[...]
Nun Vergleiche das mal mit den Ausgaben der Live Systeme.
Beim Beep Generator Amp-Out vals: bei [0x00] und beim Live-System zuletzt bei [0x01]. Und Node 0x14 sieht ganz anders aus. Vermutest du, dass der "Beep Generator" als Input genommen wird?
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Moin,solange es läuft belasse es so 😬 wir wollen nichts kaputt machen. Meiner Vermutung nach blockiert der Beep Generator den Ausgang für die Lautsprecher. Dieses Problem ist nicht neu bei deinem Soundchip. Gruß Stephan
|
TheEYE
(Themenstarter)
Anmeldungsdatum: 25. April 2007
Beiträge: 185
Wohnort: Norderstedt
|
Der "Sandmann" hat den Ton wieder beerdigt... 🙄
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
TheEYE schrieb: Der "Sandmann" hat den Ton wieder beerdigt... 🙄
So,so .. zeige mal systool -m snd_hda_intel -av falls nicht Installiert sudo apt install sysfsutils sowie wenn wieder auftritt lsof | grep pcm & lsof | grep snd systemctl status alsa-restore && systemctl status alsa-state.service
|