Hallo, ich habe mir einen USB-LPT-Controller bestellt, damit ich alte, aber noch funktionierende Drucker an neuen Rechnern nutzen kann.
Bus 001 Device 005: ID 067b:2305 Prolific Technology, Inc. PL2305 Parallel Port
ist das Teil. Leider wird aber nicht normal am LPT der Drucker erkannt, sondern nur eine Gerät "Unknown", sonst wird da am richtigen LPT der Druckername angezeigt. Ich muss auch manuell das Modell wählen, was direkt am LPT nicht der Fall ist. Das Teil druckt aber nicht, direkt am LPT aber schon.
Auffallen ist hier, dass der ständig getrennt wird, obwohl der Adapter und der Drucker natürlich nicht getrennt werden:
[ 7007.891659] usb 1-14: new full-speed USB device number 4 using xhci_hcd [ 7008.165566] usb 1-14: New USB device found, idVendor=067b, idProduct=2305, bcdDevice= 2.00 [ 7008.165574] usb 1-14: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7008.165578] usb 1-14: Product: IEEE-1284 Controller [ 7008.165581] usb 1-14: Manufacturer: Prはlific Technology Inc. [ 7008.177650] usblp 1-14:1.0: usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 7022.259255] usblp0: removed [ 7022.285446] usblp 1-14:1.0: usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 7043.251023] usblp0: removed [ 7043.277176] usblp 1-14:1.0: usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 7070.032252] usblp0: removed [ 7070.058546] usblp 1-14:1.0: usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 7133.972259] usblp0: removed [ 7133.998673] usblp 1-14:1.0: usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 7176.581844] usblp0: removed [ 7176.608124] usblp 1-14:1.0: usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 7273.412625] usblp0: removed [ 7273.694953] usb 1-14: reset full-speed USB device number 4 using xhci_hcd [ 7274.122969] usb 1-14: reset full-speed USB device number 4 using xhci_hcd [ 7329.659490] usb 1-14: reset full-speed USB device number 4 using xhci_hcd [ 7329.884836] usblp 1-14:1.0: usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 7339.808030] usblp0: removed [ 7340.083673] usb 1-14: reset full-speed USB device number 4 using xhci_hcd [ 7340.535657] usb 1-14: reset full-speed USB device number 4 using xhci_hcd [ 7545.281794] usb 1-14: reset full-speed USB device number 4 using xhci_hcd [ 7545.542315] usblp 1-14:1.0: usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 7623.571487] usblp0: removed [ 7623.603243] usblp 1-14:1.0: usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [12933.464239] usblp0: removed [13053.176656] usb 1-14: USB disconnect, device number 4 [13055.073101] usb 1-11: new full-speed USB device number 5 using xhci_hcd [13055.339254] usb 1-11: New USB device found, idVendor=067b, idProduct=2305, bcdDevice= 2.00 [13055.339263] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [13055.339267] usb 1-11: Product: IEEE-1284 Controller [13055.339270] usb 1-11: Manufacturer: Prはlific Technology Inc. [13060.465502] usblp 1-11:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [13060.467076] usblp0: removed [13070.705566] usblp 1-11:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [13070.743307] usblp0: removed [13080.945799] usblp 1-11:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [13127.106997] usblp0: removed [13955.541079] usb 1-11: USB disconnect, device number 5 [13959.360898] usb 1-14: new full-speed USB device number 6 using xhci_hcd [13959.626721] usb 1-14: New USB device found, idVendor=067b, idProduct=2305, bcdDevice= 2.00 [13959.626730] usb 1-14: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [13959.626734] usb 1-14: Product: IEEE-1284 Controller [13959.626737] usb 1-14: Manufacturer: Prはlific Technology Inc. [13964.673263] usblp 1-14:1.0: usblp0: USB Bidirectional printer dev 6 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [13966.291638] usblp0: removed [13976.445462] usblp 1-14:1.0: usblp0: USB Bidirectional printer dev 6 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [14022.433538] usblp0: removed m@ryz:~$
Die Frage ist, ob das ein Ubuntu-Problem ist, oder ob der Adapter defekt ist (sieht auch nicht gerade vertrauenswürdig, spricht vergammelt, aus).
LG DJKUhpisse