FlorianM
Anmeldungsdatum: 7. April 2013
Beiträge: Zähle...
Wohnort: Isenbüttel
|
Hallo zusammen, ich habe seit einigen Wochen ein Problem mit meinem HP Probook 450 G6. Bis vor ein paar Tagen hatte ich noch 20.04 installiert als plötzlich das interne Display nur noch ein schwarzes Bild gab. Die erste Vermutung auf Hardwareschaden konnte ich aber entkräften, da das HP-Logo beim Booten noch brav angezeigt wird. Also war meine Vermutung ein Treiberproblem. Bei Nvidia wäre das ja nichts neues gewesen, aber hier ist eine Intel UHD 620 drin. Nach viel Probieren habe ich 21.04 drüber installiert. Interessanterweise lief die Installation komplett über das interne Display, was also wieder gegen die Hardware spricht. Leider war der Fehler nach dem Setup wieder da. Ein externer HDMI-Monitor funktioniert die ganze Zeit. | > xrandr --listmoditors
Monitors: 1
0: +*XWAYLAND0 1280/340/x1024/270+0+0 XWAYLAND0
> xrandr --listactivemonitors
Monitors: 1
0: +*XWAYLAND0 1280/340/x1024/270+0+0 XWAYLAND0
|
Ist das Problem bekannt? Erstes Auftreten war ca. Mitte Juli. Florian
|
FlorianM
(Themenstarter)
Anmeldungsdatum: 7. April 2013
Beiträge: 25
Wohnort: Isenbüttel
|
Letalis_Sonus schrieb: Wechsle mal zum X Server um Probleme mit Wayland auszuschließen - die Ausgabe von xrandr hat mit Wayland kaum Aussagekraft.
Habe entsprechend dieser Seite Umgestellt. Das interne Display bleibt immer noch schwarz aber xrandr erzeugt jetzt eine etwas hoffnungsvollere Ausgabe:
| > xrandr --listmonitors
Monitors: 2
0: +*HDMI-1 1280/338x1024/270+1920+0 HDMI-1
1: +eDP-1 1920/344x1080/194+0+0 eDP-1
> xrandr --listactivemonitors
Monitors: 2
0: +*HDMI-1 1280/338x1024/270+1920+0 HDMI-1
1: +eDP-1 1920/344x1080/194+0+0 eDP-1
|
Was ich soweit sagen kann ist, dass die HDMI-Anzeige mein externer Monitor und der eDP das interne Display ist. Aktuell sind beide als verkettet konfiguriert mit HDMI als primär. Ich kann sogar die Maus auf den internen Bildschirm ziehen. von.wert schrieb: Weiterhin, wenn Du statt Wayland X verwendest? Wenn der Screen schwarz bleibt, kannst Du von der Seite schemenhaft den Desktop erkennen?
Leider ist nichts zu erkennen. Das Display scheint komplett aus zu sein. Florian
|
FlorianM
(Themenstarter)
Anmeldungsdatum: 7. April 2013
Beiträge: 25
Wohnort: Isenbüttel
|
| > lspci -nnk | grep -A3 "\[03..\]:"
00:02.0 VGA compatible controller [0300]: Intel Corporation WhiskeyLake-U GT2 [UHD Graphics 620] [8086:3ea0] (rev 02)
DeviceName: Onboard IGD
Subsystem: Hewlett-Packard Company UHD Graphics 620 (Whiskey Lake) [103c:8538]
Kernel driver in use: i915
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160 | > xrandr --prop
Screen 0: minimum 320 x 200, current 3200 x 1080, maximum 16384 x 16384
eDP-1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
_MUTTER_PRESENTATION_OUTPUT: 0
EDID:
00ffffffffffff0030e42e0600000000
001d0104952213780338d5975e598e27
1c505400000001010101010101010101
010101010101243680a070381f403020
350058c210000019182480a070381f40
3020350058c210000019000000000000
00000000000000000000000000000002
000c3aff0a3c7d1314267d000000002f
scaling mode: Full aspect
supported: Full, Center, Full aspect
Colorspace: Default
supported: Default, RGB_Wide_Gamut_Fixed_Point, RGB_Wide_Gamut_Floating_Point, opRGB, DCI-P3_RGB_D65, BT2020_RGB, BT601_YCC, BT709_YCC, XVYCC_601, XVYCC_709, SYCC_601, opYCC_601, BT2020_CYCC, BT2020_YCC
max bpc: 12
range: (6, 12)
Broadcast RGB: Automatic
supported: Automatic, Full, Limited 16:235
panel orientation: Normal
supported: Normal, Upside Down, Left Side Up, Right Side Up
link-status: Good
supported: Good, Bad
CONNECTOR_ID: 95
supported: 95
non-desktop: 0
range: (0, 1)
1920x1080 59.98*+ 59.97 59.96 59.93 39.98
1680x1050 59.95 59.88
1600x1024 60.17
1400x1050 59.98
1600x900 59.99 59.94 59.95 59.82
1280x1024 60.02
1440x900 59.89
1400x900 59.96 59.88
1280x960 60.00
1440x810 60.00 59.97
1368x768 59.88 59.85
1360x768 59.80 59.96
1280x800 59.99 59.97 59.81 59.91
1152x864 60.00
1280x720 60.00 59.99 59.86 59.74
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
1024x576 59.95 59.96 59.90 59.82
960x600 59.93 60.00
960x540 59.96 59.99 59.63 59.82
800x600 60.00 60.32 56.25
840x525 60.01 59.88
864x486 59.92 59.57
800x512 60.17
700x525 59.98
800x450 59.95 59.82
640x512 60.02
720x450 59.89
700x450 59.96 59.88
640x480 60.00 59.94
720x405 59.51 58.99
684x384 59.88 59.85
680x384 59.80 59.96
640x400 59.88 59.98
576x432 60.06
640x360 59.86 59.83 59.84 59.32
512x384 60.00
512x288 60.00 59.92
480x270 59.63 59.82
400x300 60.32 56.34
432x243 59.92 59.57
320x240 60.05
360x202 59.51 59.13
320x180 59.84 59.32
HDMI-1 connected primary 1280x1024+1920+0 (normal left inverted right x axis y axis) 338mm x 270mm
_MUTTER_PRESENTATION_OUTPUT: 0
EDID:
00ffffffffffff0038a3656601010101
050f010380221b78ee2ee5a4574a9c25
115054bfee80714f8180010101010101
010101010101302a009851002a403070
1300520e1100001e000000fd00384b1f
450b000a202020202020000000fc004c
4344313737304e580a202020000000ff
00353130343039383054420a20200089
HDCP Content Type: HDCP Type0
supported: HDCP Type0, HDCP Type1
Content Protection: Undesired
supported: Undesired, Desired, Enabled
max bpc: 12
range: (8, 12)
content type: No Data
supported: No Data, Graphics, Photo, Cinema, Game
Colorspace: Default
supported: Default, SMPTE_170M_YCC, BT709_YCC, XVYCC_601, XVYCC_709, SYCC_601, opYCC_601, opRGB, BT2020_CYCC, BT2020_RGB, BT2020_YCC, DCI-P3_RGB_D65, DCI-P3_RGB_Theater
aspect ratio: Automatic
supported: Automatic, 4:3, 16:9
Broadcast RGB: Automatic
supported: Automatic, Full, Limited 16:235
audio: auto
supported: force-dvi, off, auto, on
link-status: Good
supported: Good, Bad
CONNECTOR_ID: 103
supported: 103
non-desktop: 0
range: (0, 1)
1280x1024 60.02*+
1152x864 75.00
1024x768 75.03 70.07 60.00
832x624 74.55
800x600 72.19 75.00 60.32 56.25
640x480 75.00 72.81 66.67 59.94
720x400 70.08
DP-1 disconnected (normal left inverted right x axis y axis)
HDCP Content Type: HDCP Type0
supported: HDCP Type0, HDCP Type1
Content Protection: Undesired
supported: Undesired, Desired, Enabled
Colorspace: Default
supported: Default, RGB_Wide_Gamut_Fixed_Point, RGB_Wide_Gamut_Floating_Point, opRGB, DCI-P3_RGB_D65, BT2020_RGB, BT601_YCC, BT709_YCC, XVYCC_601, XVYCC_709, SYCC_601, opYCC_601, BT2020_CYCC, BT2020_YCC
max bpc: 12
range: (6, 12)
Broadcast RGB: Automatic
supported: Automatic, Full, Limited 16:235
audio: auto
supported: force-dvi, off, auto, on
subconnector: Unknown
supported: Unknown, VGA, DVI-D, HDMI, DP, Wireless, Native
link-status: Good
supported: Good, Bad
CONNECTOR_ID: 112
supported: 112
non-desktop: 0
range: (0, 1)
HDMI-2 disconnected (normal left inverted right x axis y axis)
HDCP Content Type: HDCP Type0
supported: HDCP Type0, HDCP Type1
Content Protection: Undesired
supported: Undesired, Desired, Enabled
max bpc: 12
range: (8, 12)
content type: No Data
supported: No Data, Graphics, Photo, Cinema, Game
Colorspace: Default
supported: Default, SMPTE_170M_YCC, BT709_YCC, XVYCC_601, XVYCC_709, SYCC_601, opYCC_601, opRGB, BT2020_CYCC, BT2020_RGB, BT2020_YCC, DCI-P3_RGB_D65, DCI-P3_RGB_Theater
aspect ratio: Automatic
supported: Automatic, 4:3, 16:9
Broadcast RGB: Automatic
supported: Automatic, Full, Limited 16:235
audio: auto
supported: force-dvi, off, auto, on
link-status: Good
supported: Good, Bad
CONNECTOR_ID: 119
supported: 119
non-desktop: 0
range: (0, 1)
|
- Xorg.0.log (84.6 KiB)
- Download Xorg.0.log
- Xorg.1.log (86.7 KiB)
- Download Xorg.1.log
|
Berlin_1946
Supporter, Wikiteam
Anmeldungsdatum: 18. September 2009
Beiträge: 8564
|
Hallo FlorianM,
F1 – Display umschalten # in Netz gefunden
Hast du das schon mal beachtet? Was steht dazu im Handbuch? Ich stelle bei meinem Lap-top damit die Anzeige um.
intern extern intern und extern
dann beginnt es wieder mit 1. Wie geht das bei dir?
|